Engineering Jobs in Peoria Illinois

• Basic Life Support (BLS) within 30 days - American Heart Association (AHA)
• Crisis Prevention Institute (CPI) Training within 3 months.

• Ensures patient, visitor and staff safety by following policies/procedures and adhering to the National Patient Safety Goals
• Sets behavioral limits on patients according to hospital and ED policies
• De-escalates patients utilizing CPI techniques
• Takes initiative in making decisions and taking immediate action to ensure safety
• Participates in application of seclusion/restraints when appropriate; provides monitoring of patients in such situations; completes appropriate documentation, including restriction of rights forms
• Participates in patient and staff debriefing
• Interfaces effectively with Behavioral Health, ED and Security staff to promote a safe environment; calls for additional assistance if needed
• Provides supportive care to patients and families when appropriate
• Continuously monitors video/audio equipment to ensure patient, visitor and staff safety, and/or makes “rounds” in the immediate patient care area
• Completes electronic event reports as indicated

• Serves as a point of entry for the Behavioral Health Service Line
• Answers all calls in a timely manner
• Ensures patients are treated with respect and dignity
• Obtains pertinent information from referral sources seeking patient admission to effectively and efficiently triage requests for services
• Assists in facilitating admissions or making referrals to appropriate resources
• Utilizes collected data to triage Behavioral Health patients and ensure appropriate level of care is recommended
• Ensures compliance with legal components of admissions/treatment recommendations (mental health code, confidentiality act, voluntary/involuntary admissions, patients’ rights, obtaining releases of information)
• Assists in administering/scoring assessment scales per protocol as needed
• Documents assessment thoroughly using assessment forms; completes information about disposition and steps taken to reach decision
• Documents interventions in a succinct and goal directed manner using DAIR format
• Incorporates Recovery principles in all therapeutic interventions
• Provides support, sets limits, and/or facilitates learning from the situation if/when providing direct patient care

• Actively promotes and achieves customer satisfaction (patient, family, departments and physicians)
• Assists in completing chart audits and compiling other data to evaluate performance
• Compiles and assists in analyzing intake, utilization and patient flow data
• Generates ideas for improving processes, treatment, and patient care
• Participates in Root Cause Analyses and assists in development of action plans and implementation of action plans

• Educates Behavioral Health patients/families/significant others about the Behavioral Health Service Line
• Possesses a working knowledge of community services
• Assists in referring patients to the most clinically appropriate setting
• Assists in making arrangements for recommended services (for example, makes appointments with follow up providers, etc.)
• Documents patients' requests for services, suggested referrals and disposition of such
• Incorporates Recovery principles in disposition planning
• Assists in conducting follow up “surveys” to ensure patient’s' needs were met (patient satisfaction, follow up appointments, etc.)
• Assists with removing any barriers patients/families encounter with recommendations
• Acts as a patient advocate to gain access to community services
• Maintains solid working relationships with other community providers
• Recognizes and reports abuse/neglect situations as required by law

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Engineering Detailer/Drafter you'll work in a unique manufacturing and dealer environment, leveraging AutoCAD and Inventor skills to create and detail drawings for parts, weldments and assemblies.

• Create clear 2D/3D drawings for skids, bases, enclosures, fuel/cooling/exhaust, and wiring layouts using company CAD standards.
• Turn engineer/customer inputs into buildready fabrication drawings and BOMs.
• Work with Project Management, Engineering, Supply Chain, and the Fab Shop to resolve questions and keep drawings productionready.
• Keep drawing sets current-apply redlines, revisions, and asbuilt updates; maintain files and version control.

• 2+ years of experience with Inventor and Autocad in a manufacturing environment
• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred, not required.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required in the last year (Inventor preferred, or comparable platforms accepted)
• Microsoft Office.
• Highly organized, flexible and have the ability to work necessary hours in a fast-paced, deadline driven environment.
• Strong attention to detail.
• Proficient communications, interpersonal and organizational skills.

Altorfer Inc. offers an industry leading compensation and benefit package:

• Health, Dental, Vision, Disability, and Life Insurance
• 401(k)
• Paid Holidays
• Paid Parental Leave and Funeral Leave
• Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
• Education Assistance
• Personal Tool Insurance, and Safety Equipment Reimbursement
• Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Payrate: $21.00 - $28.00 per hour

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Think Big Program

(Caterpillar Dealer Service Technology Program)

If you or anyone you know is considering careers please advise them of this fantastic opportunity in a high-demand field. Students can receive their Associate in Applied Sciences while going through our paid internship! Additionally, we also have a tuition reimbursement Program for students!

The Caterpillar Dealer Service Technology Program is a great opportunity for anyone interested in going to school to learn a skilled trade in a high-demand industry. Students will go through a two-year curriculum where they will rotationally attend Illinois Central College, located in East Peoria, for 8 weeks and then attend an Altorfer branch to complete an 8 week internship. This rotation continues throughout the duration of the program. A few of the courses they will take are Fundamentals of Hydraulics, Caterpillar Engine Fuel Systems, Fundamentals of Electrical Systems, Diagnostic Testing, and Undercarriage/Final Drives.

Please visit the link below to apply and for more information.

academics/catalog/agricultural-and-industrial-technologies/caterpillar-dealer-service-technology/

Compensation & What We Can Offer You:

• Payrate: $18.50 per hour
• Tuition Reimbursement
• Tool Insurance and Safety Equipment Reimbursement
• 401(k)
• Paid Time Off (PTO) earn up to 40 hours of PTO per calendar year

This position works in a warehouse/shop environment. May on a continuous basis walk, climb on and off equipment, bend and lift up to 75-100lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Our client is currently seeking a Environmental Manager for their Chemical Manufacturing facility near Peoria IL. The Manager will be responsible for implementing, maintaining and improving the Company's programs related to environmental compliance. The Environmental Manager must possess a comprehensive knowledge & understanding of State & Federal environmental regulations including Air & Water permitting, compliance tracking, documentation and reporting (including CEMS, LDAR, DMRs, SAMRs, ACCs, etc.) and annual reporting for TRI, AER, eGRRT and other NSPS/NESHAP requirements.

Interested Candidates should contact Lee Douglas @ 61 or email a current resume to

This job will have the following responsibilities:

• Conducts or leads environmental inspections to ensure environmental compliance.
• Leads or supports incident investigations to reveal root cause(s) and works with management team to effectively and pro-actively implement changes.
• Provide leadership to and define roles and responsibilities for environmental specialists.
• Implements and administers government required environmental programs to ensure facility compliance with all permits and laws.
• Generates government required environmental reports
• Assists in environmental training development and implementation in coordination with Corporate Training Coordinator
• Works with Managers to promote environmental excellence in the workforce
• Tracks effectiveness of company environmental programs and recommends changes as appropriate.
• Acts as a liaison with State, Federal and local agencies on environmental issues.
• Tracks and submits all regulatory emissions reports.
• Maintains master files of incidents, audits, environmental records and all other records/data related to compliance

Qualifications & Requirements:

• Bachelors in Environmental Science, Chemical Engineering or related field
• 10+ years relevant environmental experience implementing & administering environmental programs in an industrial setting
• Comprehensive knowledge of State / Federal environmental regulations including Air & Water permitting & Reporting (including CEMS, LDAR, DMRs, SAMRs, ACCs, etc.)
• Annual reporting for TRI, AER, eGRRT and other NSPS/NESHAP requirements.
• Waste Management reporting for hazardous, non-hazardous, and special wastes

#JDP

• Successfully completed 1,000 hours of practicum and/or internship under clinical and educational supervision
• One year of documented clinical experience under the supervision of a QMHP.

• Performs diagnostic assessments, collects diagnostic information, and determines immediate treatment plan needs with patients. Requests medical consultation, where indicated, in a diligent and timely manner.
• Completes treatment plan in conjunction with patient, identifying goals/objectives that are connected to needs identified in the assessment.
• Provides behavioral health therapy to individuals, families and/or groups identified as having behavioral health needs.
• Coordinates with Emergency Response Service and other crisis service teams for clients presenting who may be a danger to self or others.
• Maintains records in accordance with TrilliumPlace policies, as well as state and federal oversight agencies and accreditation agencies including Joint Commission, Medicaid, Medicaid Rehabilitation Option, Illinois Department of Public Health, and Commercial Insurances.
• Acts as a liaison and resource between the community and patient needs; coordinates treatment goals with community agencies, primary care physicians, court system, and managed-care entities.

• Meets clinical productivity standards
• Meets compliance standards for all documentation and clinical charts.

• Participates in in-service and competency training.
• Prepares special reports as needed on activities, and work group activities.

Job Summary:

We are seeking a Systems Engineer with 3–5 years of experience in feature or system ownership within off-highway vehicle platforms. The ideal candidate will be responsible for defining, developing, and managing system-level requirements and supporting communication architecture using CAN or Ethernet-based networks.

Key Responsibilities:

• Own and manage system or feature development from concept through validation.
• Generate high-level requirements and decompose them into detailed functional and technical requirements.
• Break down complex features into structured system requirements.
• Collaborate with cross-functional teams including software, hardware, validation, and controls.
• Support system architecture definition for off-highway vehicle applications.
• Work with CAN and/or Ethernet-based communication networks.
• Participate in system integration, validation, and issue resolution activities.
• Ensure traceability of requirements and compliance with system standards.
• Support documentation, reviews, and change management processes.

Required Qualifications:

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Systems Engineering, or related field.
• 3–5 years of experience in systems engineering or feature ownership.
• Experience in off-highway, heavy equipment, or automotive domain.
• Strong experience in requirements generation and requirement decomposition.
• Knowledge of CAN (Controller Area Network) and/or Ethernet communication protocols.
• Understanding of system lifecycle processes (V-model preferred).
• Strong analytical and communication skills.

Preferred Skills:

• Experience with requirement management tools (DOORS, Polarion, etc.).
• Knowledge of embedded systems and control systems.
• Exposure to diagnostics and network architecture.
• Familiarity with safety standards and system validation processes

Job Title: Mechanical Engineer (Thermal Systems Engineer)

Location: Mossville, IL (onsite)

Duration: 12 months contract with possibility to extend

Pay range: $44/hr to $49/hr on W2 (all inclusive)

Position Summary:

The Senior Thermal Systems Engineer will lead the design, analysis, and development of thermal systems for battery modules. This includes performing CAE, maturing current designs, developing new concepts, and supporting technology advancement to ensure robust, efficient thermal performance.

Key Responsibilities

Thermal System & Product Design

• Lead the design and development of battery module thermal systems and associated components.
• Conduct CAE simulations using tools such as FlowEFD, Ansys, or Star‑CCM+.
• Mature ongoing thermal system designs to drawing release and final production.
• Develop new thermal concepts and drive continuous improvements across the product lifecycle.

Project Ownership

• Take extreme ownership of assigned components—from initial concept through design, manufacturing, validation, and production release.
• Ensure high‑quality, reliable designs that meet performance and safety requirements.

Cross‑Functional Collaboration

• Partner daily with the battery module and battery system engineering teams.
• Support new technology development initiatives and integration efforts.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Thermal Engineering, or a related discipline
• (Master’s degree acceptable with 6+ years relevant experience)
• 8+ years of industry experience in mechanical or thermal system design

Strong background in:

• Battery module/pack thermal design
• Thermal system integration
• CAE tools: FlowEFD, Ansys, Star‑CCM+
• No two‑year degrees accepted
• Internships do not count as part of required experience
• Experience in similar roles such as Senior Mechanical Design Engineer

Additional Technical Requirements

Required

• Thermal engineering fundamentals
• Mechanical engineering principles

Desired

• Experience in battery technologies and advanced energy storage systems
• Understanding of manufacturing processes for thermal components

Soft Skills

• Strong team player with a collaborative mindset
• Highly self‑motivated and proactive
• Willingness to take ownership and drive projects to completion

Electrical Engineer 3 – Electronic Components

Mossville, IL

Role:

The Electronic component project engineer is responsible for executing component‑ and system‑level sustainment, obsolescence mitigation, and design control activities for legacy electronic products.

Responsibilities:

• Project Execution and Technical Leadership:
• Execute assigned legacy sustainment and obsolescence mitigation tasks/projects in alignment with approved plans
• Own technical deliverables for assigned components or design families, including analysis, documentation, and reviews
• Support project schedules by completing tasks on time and escalating risks or blockers early
• Maintain accurate engineering records and documentation
• Component Sustainment and Obsolescence Support:
• Identify and assess risks related to component end‑of‑life, supplier discontinuations, and long lead‑time parts
• Support mitigation activities such as component Last time buys, alternate part identification, and redesign efforts
• Maintain and update component sustainment plans and lifecycle status using proprietary tools.
• Design Control and Engineering Governance:
• Execute tasks under established design control processes, including documentation updates and technical reviews
• Support design control transfers, supplier changes, and engineering ownership transitions
• Prepare engineering evidence to support design decisions, design deviations, or change approvals
• Ensure engineering outputs meet design control and documentation standards
• Validation and Technical Analysis:
• Support component and system validation activities, including EMC, vibration, environmental, and functional testing
• Coordinate with internal and external labs to execute test plans and collect results
• Analyze test data and summarize findings to support sustainment or replacement decisions
• Utilize standard engineering tools and validation equipment as required
• Participate in NPI review meetings and provide validation coverage and test results to stake holders
• Supplier & Cross -Functional Collaboration:
• Work with suppliers to resolve technical issues and phase‑out notifications
• Support supplier assessments and technical reviews as needed
• Collaborate with system teams, quality, supply chain, and manufacturing partners
• Participate in project reviews, design reviews, and sustainment meetings
• Quality, Compliance & Continuous Improvement
• Support regulatory and compliance activities (e.g., RoHS, CE, and other applicable standards)
• Contribute to quality improvement initiatives and corrective action efforts

Identify opportunities to improve data quality, processes, and engineering execution

Education & Experience Required:

• Years of experience: 4 years
• Degree requirement: Bachelors or Masters
• Do you accept internships as job experience: No
• Are there past or additional job titles or roles that would provide comparable background to this role: No

Top 3 Skills

Experience working in NPI projects

Component obsolescence and sustainment knowledge

Communication skills

Additional Technical Skills

Electronic systems knowledge

Soft Skills

Communication skills, Agile

Education & Experience Required:

• Years of experience: 2-4 years in the manufacturing industry.
• Degree requirement: Bachelor's degree or equivalent work experience

Top 3 Skills

• Attention to details
• Communication in both verbal and writing
• Team player

Additional Technical Skills

(Required)

• Data collection analysis
• Problem solving and critical thinking
• Blueprint reading
• Gages and measurements
• MS Office Software (Outlook/Excel/Word/PowerPoint)
• Knowledge of internal combustion engines

(Desired)

• Bachelor's degree in engineering/technology/science
• ASQ CQE certification

Soft Skills

(Required)

• Positive attitude, calm and patient, can handle urgent issues under stress.