Engineering Jobs in North Pointe Georgia
51 positions found — Page 4
Overview
An established organization operating in the electronics manufacturing industry is seeking an engineer to support testing and validation activities associated with printed circuit board assemblies and related electronic products. This role supports production by developing and maintaining testing methods, evaluating product performance, and assisting with troubleshooting efforts when issues arise during manufacturing. The position works closely with engineering, operations, and quality teams to help maintain product reliability and improve manufacturing efficiency.
Primary Responsibilities
Develop and maintain testing approaches used to verify the functionality and performance of electronic circuit boards and related assemblies. This may include the development or support of functional testing, board-level verification, and system-level validation activities.
Support production testing by executing defined procedures and confirming that products meet technical specifications and internal quality requirements before release.
Investigate test failures or irregular performance observed during production. Work with design, manufacturing, and quality personnel to identify the source of issues and assist in implementing corrective actions.
Review and interpret test results to identify trends, recurring defects, or potential areas for improvement within the manufacturing process.
Maintain documentation associated with test procedures, engineering changes, and test results to ensure traceability and compliance with internal standards.
Assist with the setup, maintenance, and verification of electronic test equipment used within the manufacturing environment. Coordinate equipment service or repair when necessary.
Participate in process improvement activities related to product testing, equipment reliability, and manufacturing efficiency.
Provide guidance to production personnel regarding test procedures and correct handling of electronic assemblies during the testing process.
Collaborate with engineering, quality, and operations teams to ensure testing processes are properly integrated into manufacturing workflows.
Ensure all testing activities follow applicable internal procedures, quality standards, and industry regulations.
Qualifications
A bachelor’s degree in electrical engineering, electronics engineering, or a related technical discipline is preferred.
Approximately three to five years of experience working with electronics testing or validation in a manufacturing or production environment is typically expected.
Experience working with common electronic diagnostic and measurement tools such as oscilloscopes, digital multimeters, spectrum analyzers, or automated testing equipment is beneficial.
Exposure to test automation tools, scripting environments, or engineering software used to support test development is helpful.
Working knowledge of electronic circuit fundamentals and printed circuit board assembly processes is preferred.
Strong analytical skills, attention to detail, and the ability to troubleshoot technical issues in a production environment are important for success in this role.
Effective communication skills and the ability to collaborate with cross-functional teams are also important.
The Electronic Controls Project Managerwill provide hands-on Project Management and technical leadership for Controller and Digital product solutions
Key Responsibilities
- Define project scope, timelines, dependencies, and deliverables with key stakeholders
- Lead cross-functional teams across hardware, software, controls, testing, and product development
- Ensure alignment of product, controls, and mobile app projects with customer installation and service experience
- Develop and maintain detailed project plans, metrics, and issue tracking for transparent execution
- Facilitate regular project reviews, status updates, and issue resolution
- Participate in design reviews to ensure required hardware and software features are incorporated
- Drive risk management through requirements traceability, FMEA, and test execution
What You Need
- Bachelor’s degree in Electrical, Computer, or Mechanical Engineering
- Some Exposure in developing embedded, microprocessor-based controls and digital products
- Strong experience with system requirements, traceability, FMEA, and electronics failure analysis
- Proven ability to lead cross-functional teams and deliver complex technical programs
- Excellent communication, presentation, and stakeholder management skills
Preferred Qualifications
- Master’s degree in Engineering
- Experience in gas appliances, HVAC, or water heating systems
- Background in electronics design, software, manufacturing, or quality/reliability
- Project Management certification
- Six Sigma Green Belt / Black Belt Certification
Engineering Manager
*This is a direct hire role with excellent benefits!
Location: Lawrenceville, GA area
Summary:
Growing, multi-facility manufacturing organization is actively interviewing for an Engineering Manager to lead project and manufacturing engineers. This individual will drive capital projects, improve fabrication and assembly processes, and standardize engineering practices to support scalable production and long-term operational reliability. The role works closely with Operations, Quality, Safety, and Maintenance teams to improve throughput, reduce waste, optimize plant layouts, and support facility expansion initiatives.
Responsibilities:
- Supervise, mentor, and develop project and manufacturing engineers across multiple facilities.
- Establish consistent engineering expectations, performance standards, and development plans.
- Oversee engineering projects from concept through completion, including equipment purchases, facility construction, and expansions.
- Develop, standardize, and improve fabrication and assembly processes (cutting, forming, welding, material handling).
- Identify waste and bottlenecks; implement Lean, 5S, and Six Sigma improvements.
- Evaluate equipment needs and support capital justification, selection, and implementation of machinery and automation.
- Drive improvements in takt time, labor utilization, workflow layouts, and production planning methods.
- Develop and manage capital budgets across multiple facilities.
- Prepare and present regular project and facility status reports.
- Partner daily with Operations, Quality, Safety, and Maintenance teams.
- Lead preventive maintenance engineering efforts and support equipment reliability initiatives.
- Analyze and resolve root causes of manufacturing issues.
- Provide technical product support as needed.
- Ensure compliance with environmental and safety standards.
Qualifications:
- B.S. in Manufacturing, Mechanical, or Industrial Engineering.
- 7+ years of engineering experience in a manufacturing or industrial environment.
- 5+ years in a leadership role.
- Experience leading capital projects and facility improvements.
- Strong background in process improvement and problem-solving.
- Proficiency with AutoCAD, Revit, SolidWorks, or similar modeling software.
- Familiarity with fabrication processes (welding, CNC, steel preferred).
- Strong communication and organizational skills.
- Proficiency with Microsoft Office Suite.
- Willingness to travel up to 20%.
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Salary: $130,000
- $150,000 per year A bit about us: This Project Manager role owns end-to-end execution of complex boiler projects—schedule, budget, quality, vendors, and customer relationships.
It’s a high-visibility role reporting into senior leadership, ideal for someone with deep boiler experience who wants real ownership and long-term impact.
Why join us? Job Title: Project Manager Role: Project Manager Salary: $130-150k+ (may extend depending on experience) Location: Alpharetta, GA (hybrid/on-site Tuesday, Wednesday, Thursday) Full Benefits and Growth Opportunities Job Details Must Haves: B.S.
degree in Engineering or equivalent work experience.
Minimum ten years’ experience in recovery and/or power boiler project execution.
Demonstrated project management abilities (schedule, budget, quality, customer satisfaction).
Nice to Haves: Boiler operational experience is a plus.
Familiarity with AutoCAD is a plus.
EDUCATION AND EXPERIENCE B.S.
degree in Engineering or equivalent work experience.
Minimum ten years’ experience in recovery and/or power boiler project execution.
Boiler operational experience is a plus.
Demonstrated project management abilities (schedule, budget, quality, customer satisfaction).
Ability to communicate effectively in English.
Other languages are a plus.
Fluent in Word, Excel, Outlook, and MS Project.
Familiarity with AutoCAD is a plus.
Ability to manage several projects in different phases at one time.
Ability to create strong effective teams and create sense of urgency as required.
PRINCIPAL DUTIES Major responsibilities are listed but not necessarily limited to the following duties.
Overall responsibility for project activities, both technical and commercial.
Develop and manage schedules for assigned projects as part of project team.
Develop and manage budgets for the projects with project team members that are both local and remote.
Control the projects according to documented procedures.
Plan and coordinate with engineering personnel for completion of designs.
Manage the timely production of project deliverables and milestone dates.
Negotiate technical and commercial contracts with sub-suppliers along with the purchasing groups.
Monitor the deliveries from sub-suppliers for schedule & quality compliance.
Communicate & coordinate with customers at multiple levels throughout project.
Analyze and effectively address project quality costs and customer complaints in a timely manner.
Issue monthly status reports on projects.
Work through project issues while maintaining positive relationships with customers.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $100,000
- $118,000 per year A bit about us: We are looking for a dynamic and committed EHS Specialist to join our team.
The ideal candidate will be responsible for overseeing the safety and health regulations within our manufacturing facility.
The EHS Specalist will ensure that our company adheres to all federal, state, and local safety and environmental regulations.
This role is crucial to the success and safety of our team and requires someone who is diligent, knowledgeable, and passionate about creating a safe and healthy work environment.
Why join us? Competitive Compensation: Based on experience 401(k) Program Comprehensive Benefits: Medical, Dental, Vision, Life Insurance Generous PTO & Paid Holidays Collaborative Work Environment: Partner cross-functionally with operations, leadership, and external stakeholders Direct Impact: Play a key role in strengthening our EHS! Stability: Established manufacturing company with strong industry presence Job Details Responsibilities: Develop and maintain health and safety plans in the workplace according to legal guidelines.
Prepare and enforce policies to establish a culture of health and safety.
Evaluate practices, procedures, and facilities to assess risk and adherence to the law.
Conduct training and presentations for health and safety matters and accident prevention.
Monitor compliance to policies and laws by inspecting employees and operations.
Inspect equipment and machinery to observe possible unsafe conditions.
Investigate accidents or incidents to discover causes and handle worker’s compensation claims.
Recommend solutions to issues, improvement opportunities, or new prevention measures.
Report on health and safety awareness, issues, and statistics.
Ensure sanitation, cleanliness, and security in the workplace.
Maintain a system for recording, reporting, and investigating injuries or accidents.
Qualifications: Bachelor’s degree in safety management, engineering, or relevant field is preferred.
Proven experience as a EHS specialist or similar role in a manufacturing environment or adjacent environment for 3+ years.
Deep understanding of legal health and safety guidelines.
Ability in producing reports and developing relevant policies.
Good knowledge of data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Valid qualification in occupational health and safety, such as a certificate in Occupational Safety and Health Administration (OSHA) or Certified Safety Professional (CSP).
Demonstrated skills in hazard recognition, safety training, and compliance with federal and state safety regulations.
Experience in implementing and managing safety programs.
Knowledge of potentially hazardous materials or practices.
Proficient in MS Office; Working knowledge of safety management information systems is a plus.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Mon-Fri with occasional weekend and OT requirements About this role: A Facilities Maintenance Technician II maintains facilities, facilities systems and equipment to provide a safe, efficient and comfortable workplace.
The responsibilities will include operation, repair, and preventative maintenance of building facilities and equipment; move and installation of equipment; and other related duties.
Provides technical assistance to engineering to support the facilities.
Assists engineers in developing methods and procedures to control or improve Facilities processes.
Key Responsibilities: Monitor controlled environment areas and rooms.
Includes performing routine, regular daily checks for temperature, humidity, and static pressure, verifying HVAC, plumbing and electrical systems are working properly and performing routine preventative maintenance on all associated systems such as changing HEPA prefilters and lights.
Maintain HVAC systems to ensure that indoor environments are comfortable and in compliance with production requirements.
Includes making daily rounds of all systems, performing routine maintenance and emergency repairs.
Coordinate work with outside HVAC service providers as needed.
Coordinate the installation of all types of equipment.
Includes planning and installing all needed services and equipment (plumbing, electrical, ventilation, DI water, high- and low-pressure vacuum).
Work with local agencies to ensure all safety and compliance requirements are being met Perform relocation of office furniture and/or equipment as needed.
Write and maintain effective processes for all related equipment and procedures.
Available to support service calls of third-party vendors May execute on preventive maintenance work orders related to production equipment.
Expected to support and serve on teams or committees such a s Safety Team, Margin Improvement and PMO/Engineering etc.
Required Qualifications: 5+ years of experience managing a facility and/or warehouse 3+ Experience planning and ordering necessary materials to support job function Must be hands on and mechanically inclined Ability to learn new processes & software Able to work 1st shift 6 am to 2:30 pm ET with occasional weekend and OT requirements Preferred Qualifications: Experience with managing teams with and without direct reporting authority Competent with Microsoft suite; Outlook, Excel, Word Competency with BMRAM, Service Zone, etc.
Quality Systems Duties and Responsibilities: Build Quality into all aspects of their work by maintaining compliance to all quality requirements.
We provide innovative and practical solutions to support our customers with long-term sustainability goals and their increased competitiveness.
We believe the technical and economic know-how and of our employees is the key success factor of our company.
At Primetals Technologies, you are encouraged to learn, grow, develop and contribute.
Come join the 7,000 employees worldwide—including 1,000 team members across 14 U.S.
locations—at Primetals Technologies, a Group Company of Mitsubishi Heavy Industries.
Our Alpharetta, GA location is currently seeking to fill an Executive Assistant position.
Applicants must pass a pre-employment physical exam and drug screen.
Classification and base pay rate will be dependent upon skillset and prior experience.
Duties of the Executive Assistant will be performed in-house and on location at customer site.
Requirements – 7–10 years of experience supporting C‑suite leaders in a mid‑to‑large U.S.
company.
Demonstrated experience supporting both strategic and operational executive functions.
Exceptional organizational, time‑management, and multitasking skills.
Superior written and verbal communication skills to appropriately represent our senior leadership team.
Strong professionalism and executive presence.
High proficiency with Microsoft 365 (Outlook, Excel, Teams, PowerPoint, SharePoint).
Absolute discretion and integrity in handling confidential information.
Proven ability to work under pressure, manage competing deadlines, and adapt to fast‑changing priorities.
Bachelor’s Degree level Preferred – Experience supporting both CEO and CFO simultaneously.
Background in industries with rapid decision cycles or global operations.
Lean Six Sigma Yellow or Green Belt with a continuous improvement mindset.
Project Management Training or certification (i.e.
CAPM).
Proficiency with Power BI, workflow tools and other business productivity platforms.
ESSENTIAL DUTIES & RESPONSIBILITIES: Manage complex and dynamic calendars for the CEO and CFO, including prioritization and scheduling of high‑impact meetings.
Coordinate domestic and international travel arrangements, logistics, itineraries, and expense reconciliation.
Prepare daily briefings, agendas, talking points, executive summaries, and meeting materials.
Serve as a trusted liaison, screening communication and ensuring the executives are fully prepared for all engagements.
Handle urgent, confidential, and sensitive matters with discretion and professionalism.
Maintain executive files, records, and documents with strict confidentiality.
Partner with HR, Legal, IT, Communications, and Finance to support office operations and executive needs.
Enhance administrative processes to improve efficiency, workflow, and communication throughout the executive office.
Support special projects driven by the CEO/CFO, including strategic initiatives, organizational priorities, and cross‑functional activities.
Track key project milestones and ensure timely collection of updates and deliverables.
Conduct research, compile information, and prepare summaries, reports, or presentations as needed.
Assist in preparing Board meeting materials, presentations, and executive briefing packages.
Manage logistics, schedules, compliance timelines, and documentation for Board and committee meetings.
Support Senior Leadership Team meetings through agenda planning, coordination, and minutes.
Plan, coordinate, and execute executive meetings, leadership offsites, customer visits, and special events.
Prepare logistics, materials, and minutes, document decisions and track action items.
Ensure all travel plans are optimized, accurate, and aligned with executive priorities.
Primetals Technologies offers a full range of benefits, including paid time off, and Insurance – Medical – including an HSA option, dental, vision, accident, hospital indemnity, critical illness, life & accidental death Financial – 401(k), flexible spending accounts, education reimbursement, and employee referral bonuses.
At Primetals Technologies, we value difference for the benefit of our employees, our customers, and our Community.
Primetals Technologies is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or gender identity.
6726
Salary: $110,000
- $120,000 per year A bit about us: We are a leading top provider of metal sheet, plate, extrusions, and other innovative architectural products that support industries such as aerospace, automotive, building, and construction.
We solve complex engineering challenges and transform the way we fly, drive and build.
Why join us? Competitive Compensation, Bonus and Benefits Package Stable Career path Rewarding experience to work with fortune 500 Company Excellent culture and peers 401K Match 3 weeks of vacation to start Job Details Job Details: We're currently seeking an experienced, dynamic and highly-qualified Manufacturing Execution System (MES) Solution Architect to join our team.
This position is a key role within our Engineering department, where you will be responsible for designing, developing, and implementing MES solutions that meet our business needs and align with our technology strategy.
You will work closely with cross-functional teams, including manufacturing, IT, and engineering to ensure the successful execution of MES projects.
This is a permanent role that offers an exciting opportunity to contribute to our ongoing growth and success.
Responsibilities: 1.
Design and implement MES solutions that meet business requirements and align with the company's technology strategy.
2.
Collaborate with cross-functional teams to understand business needs and develop MES solutions that meet these needs.
3.
Lead the development of MES architecture and ensure its alignment with the overall IT architecture.
4.
Develop and implement MES standards, best practices, and guidelines.
5.
Identify and troubleshoot any issues with the MES system, and provide technical support as needed.
6.
Collaborate with vendors and partners to ensure the successful execution of MES projects.
7.
Conduct training sessions to educate staff on the use of the MES system.
8.
Stay current with the latest technology trends and innovations in the field of MES and recommend improvements to the system as necessary.
Qualifications: 1.
Bachelor's degree in Computer Science, Engineering, or a related field.
2.
Minimum of 5 years of experience in a similar role, preferably in the engineering or manufacturing industry.
3.
Proven experience with SCADA, Ignition 8.1 Gold Certification, Python programming, and manufacturing domain.
4.
Strong knowledge of industrial control systems, back-end computing infrastructure, networking, databases, and virtualization.
5.
Exceptional problem-solving skills and the ability to troubleshoot complex technical issues.
6.
Excellent communication skills, with the ability to explain complex technical concepts in a clear and concise manner.
7.
Strong project management skills, with the ability to lead and manage multiple projects simultaneously.
8.
Ability to work effectively with cross-functional teams and collaborate with all levels of the organization.
9.
Strong understanding of manufacturing processes and systems.
10.
Ability to stay current with the latest technology trends and innovations in the field of MES.
This role is a unique opportunity to join a dynamic team and contribute to our ongoing growth and success.
If you're an experienced MES Solution Architect with a passion for technology and innovation, we'd love to hear from you.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
About the Company
Serta Simmons Bedding is looking for a Corporate Senior Technician to support equipment performance and reliability across our national network. This role partners closely with plant leadership and engineering teams to troubleshoot complex issues, implement preventative maintenance improvements, and elevate technical standards companywide.
Learn more and apply today to start drive operational excellence at Serta Simmons Bedding!
About the Role
*To note: While this position will sit remotely, this is a full-time role requiring approximately 80% travel. Most travel will be by air to warehouse locations nationwide to provide onsite support.
What You'll Do:
- Follow all company safety and OSHA guidelines
- Perform advanced maintenance and repairs on mechanical, electrical, hydraulic, pneumatic, PLC, and robotic systems
- Troubleshoot complex equipment issues and implement corrective/preventive actions
- Lead preventative maintenance (PM) programs and continuous improvement initiatives (Lean/Kaizen)
- Partner with Engineering on equipment installations and upgrades
- Train and mentor Operators and Maintenance Technicians
- Document maintenance work and recommend equipment/process improvements
- Support production goals by improving equipment reliability, quality, and efficiency
How You'll Do It:
- High School Diploma or GED (Associate’s degree or technical certification preferred)
- 5+ years of experience in two or more maintenance trades (mechanical, electrical, PLC, hydraulics, robotics, pneumatics)
Additional Skill Sets:
- Experience leading or training others
- Ability to read blueprints and schematics
- Strong troubleshooting and problem-solving skills
- Effective communication and teamwork skills
- Comfortable working in a fast-paced manufacturing environment (standing, bending, lifting)
- Must be 18+ and able to read, write, and speak English
The salary range for this position is $67,000-80,000 per year, depending on experience and qualifications.
Equal Opportunity Statement
Employees are required to comply with COVID policies established by a vendor or customer.
It is our policy to abide by all federal, state, and local laws prohibiting employment discrimination, with respect to all terms and conditions of employment, based solely on a person’s race, color, religious creed/religion, sex (including sexual orientation, or gender identity), pregnancy, childbirth or other related medical conditions, national origin, ancestry, citizenship status, disability, age, military status, or status as a Vietnam-era or special disabled veteran, marital status, registered domestic partner or civil union status, gender (including sex stereotyping or expression), genetic information (including family medical history), or any other protected status except where a reasonable, bona fide occupational qualification exists.
SSB will provide reasonable accommodations to applicants and employees who need them, as required by law.
The hiring salary range for this position applies to where legally required, and most other geographies. Starting pay for the successful applicant depends on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. The benefits available for this position include medical, dental, vision, 401(k) plan, life insurance coverage, disability benefits, tuition assistance program and PTO or, if applicable, as otherwise dictated by the appropriate Collective Bargaining Agreement.
