Engineering Jobs in Normandy Park Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The Company

Davis Wire (Kent, WA) is part of the Heico US Wire Group, comprising three independent companies with four manufacturing facilities that produce steel wire and cable products for diverse industries. This independent model encourages entrepreneurship, growth, and professional development at all levels. The US Wire Group operates within the Metals Processing Group and is wholly owned by The Heico Companies, LLC.

Our philosophy of developing close customer contact to provide prompt, responsive service and to meet our customers’ changing needs allows us to be leaders within our respective industries. Products are marketed domestically through a direct sales force, manufacturer's representatives, and an established network of independent distributors. Our company is diverse and has a solid management base, product/market niches and efficient manufacturing capabilities.

The Position

The EHS Manager is a champion of safety culture, responsible for developing and implementing programs that ensure compliance with the Heico EHS management system, regulatory requirements, and the site’s strategic goals. Reporting to the Facility VP/GM, this visible role requires a strong presence on the production floor and close collaboration with employees, supervisors, managers, and corporate/regional EHS teams. The role may also be overseeing the work of staff, hourly employees, or external consultants.

Job Description

Primary Responsibilities

• Lead the development and implementation of safety policies, procedures, and training programs to ensure compliance with local, state, and federal regulations.
• Promote a proactive safety culture by training managers and employees in safe work practices, fire prevention, chemical/material handling, and emergency response.
• Serves as a visible leader on the production floor, conducting inspections, identifying risks, and ensuring timely corrective or preventative actions.
• Plans and implements training programs for managers and employees on safe work practices, fire prevention, and proper handling of materials.
• Guides management and supervisors in accident investigations and partnering with HR on workers’ compensation, hearings, and insurance cases.
• Manages environmental compliance, including waste stream management (RCRA/DOT), manifests, labeling, and wastewater treatment operations.
• Ensures that all waste is stored in compliance with RCRA and other relevant regulations.
• Conducts environmental and safety inspections and determines corrective or preventative measures where indicated and follows up to ensure measures have been implemented.
• Completes and submits all environmental reports required by various agencies.
• Plans and implements safety policies and procedures in compliance with local, state, and federal rules and regulations.
• Prepares studies and analyses of industrial accident causes and hazards to health for use by company personnel and outside agencies.
• Compiles and submits accident reports required by company and regulatory agencies.
• Oversees the administration of workers' compensation program, including working with the insurance carrier to eliminate employee industrial accidents, working in tandem with the Human Resources department.
• Represents the organization in community or industry safety groups and programs.
• Maintains safety files and records.

Job Requirements

• Minimum 10 years of industrial EHS experience including at least 5 years’ management level EHS experience preferred.
• Bachelor’s degree from an accredited institution in engineering, safety, environmental or related science
• Strong working knowledge of applicable EHS laws and regulations, state, local, and federal
• Excellent time management, project coordination and organizational skills
• Strong analytical skills and ability to leverage data to make/gather support for business decisions
• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to think strategically and solve practical problems and deal with a variety of variables in situations where only limited standardization exists.
• Ability to carry out supervisory responsibilities in accordance with the organization's policies and applicable laws.
• Strong team building and team-participation skills
• Ability to both teach and learn
• Strong oral and written communication skills with an ability to communicate with all levels of the organization and work in a team environment
• Must be able to use Excel, Word, and Outlook
• If needed must be able to obtain “Operator in Training Certification” from State of Washington Department of Ecology
• Must be able to understand the process flow and reactions occurring within each component of the wastewater treatment and acid recovery system
• Must be able to understand and apply basic principles of chemistry (i.e. pH, acids/bases)
• Certification in an EHS related discipline and/or further education is a plus.
• Authorized to work for any employer in the United States of America
• Must be able to pass preemployment background, drug/alcohol, and physical screenings

Physical Requirements

• Must be able to use a variety of hand tools such as wrenches, screwdrivers, hammers, etc.
• Must be able to work in a dusty environment around metals
• Sight – hand and eye coordination, depth perception needed to operate, adjust, and quantify chemicals and equipment, vision sufficient to inspect work areas and building for issues and operate computers
• Hearing – must be able to hear others and warning sounds of forklift and other heavy machinery
• Speech – must be able to communicate effectively with others while working
• Smell – must be able to smell various chemicals and gasses
• Must be able to sit, stand, and walk for long periods – frequent to constant
• Must be able to squat, stoop, twist, climb, crawl, reach, grasp, and fine manipulation, and bend occasional to frequent
• Must be able to be able to lift/carry 50+ lbs - occasional

Key Leadership Competencies

• Leadership Capability - Has the leadership acumen and credibility to work across the entire organization and develop talent. Should be hands-on, but able to delegate appropriately with the ability to motivate, inspire and commit an organization to a course of action and achieve results.
• Strategic Thinking - Strong strategic capabilities and overall business acumen. Financially savvy and understands the economic levers behind improving EBITDA and other key metrics. Fact-based, data-driven and analytical. Creative mindset with the ability to identify and mobilize around new opportunities very quickly.
• Innovation Focus - Confident ability to drive change and express and advocate for new ideas and ways of doing things. Willingness to take appropriate business risks, recognizing that to succeed overall, one will occasionally fail.
• Collaborative Style – Engages stakeholders in problem solving and decision making. Is adept at bringing people together to tackle issues rather than dictate solutions. Has a collegial, inclusive working style and is professional and courteous. Builds strong relationships both internally and externally. Is both confident and humble.
• Communication Skills - Excellent verbal and written communication skills with the ability to effectively deliver and reinforce consistent messages at all levels. Excellent listening skills.

NOTE: We are willing to provide relocation assistance for the right candidate

About Avalanche Energy

Avalanche Energy is a Washington-based startup building compact, deployable fusion systems through rapid hardware iteration. Rather than pursuing fusion as a single grid-scale outcome, Avalanche develops transportable fusion machines designed to be built, tested, and operated on short cycles, turning real hardware into steady progress. This approach enables near-term applications that demand extreme energy density and endurance—starting with fusion neutron production for radioisotope power and other defense and space uses—while advancing the underlying fusion platform. Backed by U.S. government programs and a team experienced in delivering complex systems, Avalanche is focused on building fusion that runs in the real world, not just on paper.

Avalanche might be a fit for you if:

• You like working at the intersection of plasma theory, simulation, and real hardware, and want your work to directly influence experiments and system design.
• You're comfortable making progress in ambiguous, fast-moving environments, using good scientific judgment to learn quickly and adjust course.
• You value rigor and clarity as tools that help teams move faster—not as reasons to slow down.
• You enjoy close collaboration with engineers and care about how plasma physics tradeoffs show up in real systems.
• You take satisfaction in mentoring and sharing knowledge to help a strong science team get even better.
• You're excited by rapid iteration—building, testing, learning, and repeating—and want to help make that loop more effective.

About the Role

A Senior Experimental Physicist is a technical leader and senior individual contributor within Avalanche's Science organization. This role is responsible for advancing plasma physics understanding as it applies directly to Avalanche's fusion systems, while operating comfortably in an environment of rapid iteration, incomplete information, and evolving requirements.

This is not a purely academic role. You will work closely with experimental systems, diagnostics, simulations, and cross-functional engineering teams to inform design decisions, interpret results, and guide next experiments. You are expected to exercise strong scientific judgment, propose new approaches, and help the team move faster and smarter—even when the path forward is not fully defined.

In this role you're responsible for:

• Design, analyze, and interpret plasma experiments in close collaboration with the broader science team and engineers.
• Contribute to rapid test–learn cycles by translating results into clear, actionable recommendations for future experiments.
• Integrate experimental data, simulations, and theory to inform conclusions and guide next steps.
• Help define which questions matter most at a given stage of development and where effort is best focused.
• Work closely with engineering teams (mechanical, electrical, instrumentation, software) to ensure plasma physics considerations are reflected in system design.
• Communicate complex plasma physics concepts clearly to non-plasma specialists across the organization.
• Support product and system trade studies by providing scientifically grounded input.
• Act as a technical mentor to junior scientists and engineers.
• Share knowledge, review analyses, and contribute to a collaborative and curious science culture.
• Help strengthen team practices around documentation, analysis, and communication.

About you:

• PhD in plasma physics or a closely related field, or equivalent depth of experience.
• 3+ years post-PhD experience in a plasma related R&D environment working closely with hardware and diagnostics.
• Demonstrated ability to approach complex plasma physics problems analytically
• Comfortable interpreting theory, simulation, and experimental results .
• Ability to work with a diverse team as well as operate independently, prioritize work, and make progress in ambiguous environments.
• Clear communicator who can explain complex ideas across disciplines.
• Comfort iterating quickly and revising assumptions as new data emerges.
• Comfortable coding in python or similar languages

Bonus skills & experience:

• Direct experience working with fusion relevant plasma diagnostics
• Electrical and/or mechanical technician experience
• Experience assembling experimental, prototype, or low-volume hardware
• Experience with interlocks or other safety systems
• Familiarity with vacuum or ultra-high-vacuum systems
• Experience with cryogenic systems or fluid handling
• Experience working around high-voltage systems
• Experience with pneumatic systems and precision plumbing
• Automation or controls installation experience
• Surface-mount and through-hole soldering experience
• Prior work in fast-paced, hardware-driven R&D environments

Additional Considerations

• Site: Tukwila, Washington
• Travel: Occasional travel for equipment procurement, integration, or collaboration as needed

Benefits

• Excellent medical, dental, and vision benefits
• 10 paid holidays and a company-wide December holiday break
• Generous paid vacation and sick time
• Small, tight-knit team with low barriers to action
• Exposure to a wide range of challenging, hands-on engineering problems
• Meaningful equity in the form of stock options

We value people of all backgrounds. We are an equal opportunity employer, and you do not need to match every listed qualification to apply. If you like being hands-on, all over the system, and making difficult hardware work in the real world, we encourage you to apply.

Come make an impact in the Public Sector! Join our team to do meaningful work and support high-impact government missions.

GP Strategies Government Solutions, Inc. Government Training Solutions | GP Strategies, a wholly owned subsidiary of GP Strategies Corporation, focuses on helping every public sector team unlock its full potential through people performance solutions.

Our work directly supports mission critical government agencies, including:

• Air Force

• Army

• Department of Defense (DoD)

• Department of Health & Human Services (HHS)

• Department of Homeland Security

• NASA

• National Highway Institute (NHI) | Federal Highway Administration (FHWA)

• State & Local Governments

Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.

GP Strategies Corporation, the corporate parent of GP Strategies Government Solutions, is a global leader in talent transformation, dedicated to empowering organizations to unlock their full potential. We help businesses enhance workforce performance and achieve strategic goals through innovative, technology-enabled learning solutions. For over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes.

GP Strategies Government Solutions has an immediate need for a Part-Time Aviation Instructor to support a large aerospace manufacturing client in the Renton/Auburn/South Park, WA area. The Instructor will teach classes onsite. Instructors are teaching mostly 1st and 2nd shift. The content is already created so the Instructor is not responsible for creating the content.

Typical Courses include the following:

• Airplane Manufacturing Engineering
• Common Manufacturing Execution System (CMES) Basics
• Introduction to CMES for A&I Mechanic
• Introduction to CMES for ADPP Mechanics
• CMES IP Basics for BCA Industrial Engineering
• CMES IP Basics for BCA Quality
• CMES ADPP Basics for BCA Quality

Job Summary:

• Utilize teaching aids such as training handbooks, demonstration models, multimedia visual aids, computer tutorials and reference works.
• Apply learning techniques to ensure student retention and prove competency in specific tasks and behaviors.
• Manage the course training environment to enable the course content to be delivered as designed.
• Delivers training sessions covering specified areas of technical specialty.
• Deploys learning assessments to measure progress and to evaluate effectiveness of recommended training.
• Travels to client sites as needed.
• Participate in and prepare to deliver other courses within expertise domain knowledge areas

Qualifications:

• Experience in the aviation/aerospace Industry
• Experience as an Instructor in a classroom environment
• Manage basic technology to deliver
• Understanding of CMES (Common Manufacturing Execution System) a plus

We are seeking candidates with the following abilities:

• Ability to understand Adult learning principles – recognize the dynamics and behavioral styles of the participants to effectively guide the discussion
• Ability to challenge learners' assumptions to expose gap between knowledge, action and beliefs
• Facilitate dialog that helps learner make sense of content and build confidence
• Flexible and resourceful to solve immediate problems and get help when needed

PHYSICAL REQUIREMENTS

General physical requirements needed to perform the essential functions of this job may vary based on location of assignment.

Assignment Location – Renton, WA

• Sedentary Work – Exerting up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body.
• Fingering (typing), communicating, repetitive motions.
• Close visual acuity to prepare and analyze data, view computer monitors and read. May need to view presentation screens and other visual aids in a virtual setting.
• Inside environmental conditions with protection from outside elements.

At GP Strategies Government Solutions culture focuses on performance and revolves around respect, fairness, and working collaboratively to achieve our goals. We support our People, no matter who they are or where they are from, because we all have valuable and unique perspectives and approaches. That's how great ideas are born, which enable us to work smarter.

GP Strategies Government Solutions is committed and proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions, sexual orientation, and gender identity), national origin, age, veteran status, disability, or any other federally protected class.

GP Government Solutions is a subsidiary of GP Strategies Corporation, a global workforce-transformation company with over 50 plus years of experience. To find out more, please visit us as

https:///industries-we-serve/government/

Job Description:

Holaday-Parks is seeking an experienced Design Engineer to support the design and execution of complex commercial and industrial mechanical construction projects. This role is best suited for an engineer who has developed a strong technical foundation in HVAC system design and is comfortable contributing meaningfully to projects with increasing autonomy.

The Design Engineer will support design-build and design-assist projects, collaborating closely with project management, estimating, and field teams to deliver high-performance mechanical systems. This individual should be capable of managing assigned scopes of work, resolving technical challenges, and operating independently once oriented to project standards and processes. This position supports large-scale and schedule-driven projects and requires a proactive, solutions-oriented mindset.

Essential Functions:

• Develop HVAC and mechanical system designs for commercial and industrial projects
• Perform heating and cooling load calculations and equipment sizing
• Prepare mechanical layouts, ductwork and piping schematics, and coordinated Revit models
• Review drawings, specifications, and contract documents
• Participate in design-assist and design-build coordination meetings
• Collaborate with estimating during preconstruction phases
• Support constructability reviews and value engineering efforts
• Review technical submittals and assist with complex RFIs
• Coordinate with project managers, field leadership, general contractors, and owners
• Ensure compliance with applicable building codes, energy standards, and project requirements
• Support project timelines in fast-paced, schedule-driven environments

Qualifications and Education:

·       Bachelor’s degree in Mechanical Engineering

·       4+ years of experience in mechanical (HVAC) design within commercial or industrial construction

·       PE license preferred or actively preparing to sit for the PE exam

·       Proficiency in Revit and AutoCAD

·       Strong understanding of mechanical codes and energy standards

·       Experience in design-build or design-assist project delivery

·       Ability to manage multiple projects simultaneously

·       Strong problem-solving and communication skills

·       Experience supporting large-scale or mission-critical facilities

·       EIT certification

·       Familiarity with Bluebeam and project coordination software

·       Experience collaborating directly with field installation teams

Work Environment:

·       Office-based in Tukwila, WA

·       Occasional site visits as needed

·       Collaborative, team-oriented environment supporting active construction projects

What We Offer:

·       Holaday-Parks, Inc., offers an excellent salary and benefits package—paying 100% of medical/vision/dental, and prescription premiums for employees.

Salary Range:

·       $100,000-$125,000 DOE

If interested in applying, please submit your cover letter and resume to

About the role:

Team 360 Staffing is seeking reliable and motivated Plant Maintenance Technician to join our client's team. The ideal candidate will ensure plant production equipment continues to operate safely and efficiently; you would be utilizing skills to reduce unwanted downtime.

We are seeking highly organized and detail-oriented candidates with strong multitasking and time-management proficiency. Candidates must be able to analyze and troubleshoot electrical, automation, mechanical, and operational problems on equipment.

Company:

Team 360 Staffing is a trusted staffing and recruitment agency that connects job seekers with the right opportunities across various industries. You will be working for a specialty dairy brand that focuses on ultra-creamy, high-quality yogurt.

Job Type: Full-time

Pay: $33.00 - $35.00 per hour

Benefits:

• 401 (K)
• Paid time off

Production Floor Responsibilities (80%):

• Troubleshoot equipment failure and mechanical/electrical issues on a day-to-day basis.
• Adjust, repair, or replace the correct part using power or hand tools as appropriate.
• Performs minor electrical maintenance if needed.
• Monitor production for any physical, mechanical, electrical improvements/changes/repairs.
• Respond to maintenance/facility emergency situations in accordance with departmental protocol.
• Follow all OSHA, HAZMAT, USDA, FDA, and EPA rules and regulations.
• Complete PMs based on direction given from Maintenance Supervisor/Engineering Manager
• Work and assist with implementing and following preventive maintenance (CMMS system) schedule.
• Organize and maintain work area to follow 5s.
• Performing other duties as assigned.

Facilities/building Responsibilities (20%):

• Assist in the maintenance of buildings and facilities as needed.
• Performs minor plumbing maintenance, if needed.
• Assist in troubleshooting of HVAC systems.
• Assist in troubleshooting of Boiler systems.
• Monitor facilities for any repairs and improvements.
• Performing other duties as assigned

Qualifications:

• High School Diploma or GED equivalent.
• Must have a valid US Driver's license and reliable vehicle.
• Formal training (certification) in a mechanical-industrial-related trade preferred.
• Strong engineering/mechanical background.
• Basic pneumatic, hydraulic, conveyor, and electrical experience and prior work with PLCs.
• Prior maintenance experience in a food manufacturing setting is preferred.
• Experience with HVAC systems.
• Possess basic knowledge of OSHA and Food Safety regulations.
• TIG/MIG welding knowledge and experience
• Prior experience with form-fill-seal machines and bottling machines.
• Strong written and communication skills.
• Continuous improvement mindset.
• Must be able to work rotational on-call assistance for emergencies.