Engineering Jobs in None Oh Wfh

CHRISTUS Santa Rosa Hospital – San Marcos, which originated in 1923 as Hays County Soldiers, Sailors and Marines Memorial Hospital, opened at its current Wonder World Drive location in 1983. Our staff of more than 700 Associates works with more than 300 active and consulting physicians to provide quality services to patients and their families. For more than 20 consecutive years, we have been named The Best Hospital in Hays County in the annual “Best of Hays” publication released by the San Marcos Daily Record. In addition to interventional cardiac services, CHRISTUS Santa Rosa Hospital – San Marcos is a Certified Chest Pain Center and an accredited Primary Stroke Center. We lead the region in da Vinci robotic-assisted surgery and offers a variety of specialty care services including medical imaging, rehabilitation, hospice, women’s services and more.

Summary:

Provides continual surveillance of electronic monitors for one or more patients in a centralized telemetry monitoring station, with the ability to recognize normal and abnormal rhythms. Documents changes in rhythm and reports these changes timely and according to established protocol. Requires thorough knowledge of arrhythmia recognition. Responsible for assuring monitoring equipment and supplies are available and ready for use. May also provide pulse oximetry monitoring and reporting.

Responsibilities:

• Responsible for constant electro-cardiographic monitoring of patients. Is aware of baseline rhythm for all patients being monitored.
• Communicates changes in rhythms, ectopy, etc., immediately to appropriate Nursing staff;
  ensures all communications are documented appropriately.
• Provides accurate documentation of information obtained from the cardiac monitoring equipment.
• May be required to log pulse oximetry readings and report any alarms and/or deviation from normal parameters to the healthcare team.
• Accurately performs clerical tasks related to the patient’s medical record, places reports (strip reviews, alarm records) on the medical record in a timely manner if applicable for the facility/location.
• Communicates effectively with interdisciplinary team. Communicates appropriately with physicians, staff members, and patient/family members. Facilitates communication to appropriate caregivers.
• Responsible for assuring equipment and supplies are available and ready for use. Demonstrates good stewardship in proper use and maintenance of equipment and supplies.
• Performs assigned department maintenance duties. Ensures equipment is clean and functioning properly. Notifies Director and/or Biomedical Engineering of any malfunctions in a timely manner.
• Demonstrates professionalism in teamwork and communication.
• Performs all duties in a manner that protects the confidentiality of patients in adherence with HIPAA.
• Performs other duties as assigned.

Requirements:

Education/Skills

• High school diploma or equivalent required
• Must possess good written and oral communication skills

Experience

• EKG/arrhythmia interpretation background highly preferred
• Basic knowledge of medical terminology preferred

Licenses, Registrations, or Certifications

• Successful completion of an EKG class required within 90 days of hire/transfer date
• BLS certification preferred (AHA)

Work Schedule:

7PM - 7AM

Work Type:

Part Time

Who We Are

Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world.

What We Offer

Salary:

Location:

You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more.

At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits.

We are actively recruiting a Technical Marketer for the Photonics Platforms Business (PPB).

PPB creates brilliant solutions at the intersection of light and the human body. We build visual systems that make augmented reality effortless, beautiful, and deeply human. Born within Applied Materials, PPB combines startup-level agility with 50 years of material innovation expertise.

What began as a waveguide foundry quickly evolved into a fully integrated design-to-manufacturing capability. PPB owns the entire stack required to deliver consumer-grade AR experiences at scale, leveraging the world’s broadest portfolio of thin-film, patterning, and metrology technologies. With deep expertise in atomic-level materials engineering and unprecedented vertical integration, PPB is creating a world where photonics unlock new powers and possibilities for everyone.

We are looking for an experienced technical marketing expert to join our team, to help our go-to-market activities by driving analysis of ecosystem, cost, pricing, red team and bill-of-materials analysis.

General Profile: Recognized as an expert within the company. Anticipates internal and or external business challenges and/or regulatory issues; recommends process, product or service improvements. Solves unique and complex problems that have a broad impact on the business. Contributes to the development of functional strategy. Leads project teams to achieve milestones and objectives.

Key Responsibilities

1. Recognized as an expert and drives field/technical and customer engagement from a BU perspective.

2. Has expert understanding of global, technical and market trends and executes a systematic process for capturing competitive intelligence.

3. Drives alignment and tracks business focus on TAM, share, margin between BU and Field.

4. Leads project teams to achieve milestones/ objectives and map trends, opportunities and threats to roadmap and strategies.

5. Enhances technical communication and information flow between Field and Product Teams. Communicates customer info on applications, value validation and adoption issues.

6. Coordinate (TRM) Technical Review workshops with BU.

Functional Knowledge

• Regarded as the technical expert in their particular field
• Demonstrates in-depth and/or breadth of expertise in own discipline and broad knowledge of other disciplines within the function

Business Expertise

• Anticipates business and regulatory issues; recommends product, process or service improvements

Leadership

• Leads projects with notable risk and complexity; develops the strategy for project execution

Problem Solving

• Solves unique and complex problems with broad impact on the business; requires conceptual and innovative thinking to develop solutions

Impact

• Impacts the direction and resource allocation for program, project or services; works within general functional policies and industry guidelines

Interpersonal Skills

• Communicates complex ideas, anticipates potential objections and persuades others, often at senior levels, to adopt a different point of view

Education: Bachelor's Degree

Location: Santa Clara, on-site full-time

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable.

For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement.

Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at , or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

Who We Are

Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips – the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world – like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world.

What We Offer

Salary:

Location:

You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company. Visit our Careers website to learn more.

At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits.

We are actively recruiting a Strategic Partnerships Manager for our Optical Interconnect program in the Photonics Platforms Business (PPB).

PPB is a rapidly growing business within Applied Materials. We are harnessing the power of Applied Material’s world-leading material science and nano-fabrication capabilities to enable the next generation of Optical Interconnects for AI Data Centers.

The purpose of the Strategic Partnerships Manager role is to develop and nurture deep engagements with our most important partners.

Experience in the Photonics industry is essential

Key Responsibilities:

• Identify and develop deep long term partner relationships.
• Negotiate and own joint development agreements and programs.
• Scope and coordinate partner project plans and Statements of Work, in tight collaboration with engineering
• Team with the Engineering, Technical Project Management, Product Marketing, Manufacturing, and Supply Chain groups.
• Ensure execution to your commitments
• Transition Joint Development programs into long term supply arrangement together with the Supply Chain team.
• Shape partner and internal roadmaps.
• Keep up to date on the industry ecosystem, and educate the management team on changes, and what they mean.

Key skills and experience:

• Minimum Bachelor’s degree, ideally in a technical discipline. MBA a plus
• 5+ years of relevant professional experience
• Excellent communication skills, including active listening and questioning to really understand what partners bring to us, and what they need from us
• Fluent English language and experience communicating with people from different countries on the phone and in-person
• Experience in the AI Data Center, AI, or Silicon Photonics industries
• Experience developing strategic partnerships
• Business savvy – understands business basics
• Partner empathy
• Excellent presentation skills
• Experience influencing action without owning resources
• Experience in managing projects together with the engineering team
• Experience managing and leading multiple projects simultaneously
• Experience negotiating contracts and agreements
• Startup experience a plus

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable.

For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement.

Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at , or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

At Trane TechnologiesTM  and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.

What’s in it for you:

Be a part of our mission!  As a world leader in creating comfortable, sustainable, and efficient environments, it’s our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what’s possible for a sustainable world.  

This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacturer, giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth.

Why Trane Technologies Is The Best Company for HVAC Technicians: 

• Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems
• Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation
• Dedicated to a military friendly environment (Veterans are highly encouraged to apply)
• Unlimited opportunities for career development and promotions
• Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)
• World Class continuing education, featuring Manufacturer (OEM) Level Training
• Company-wide commitment to promoting a strong work/life balance
• Organizational encouragement of community involvement and sustainability (green initiatives)
• Late model, clean, and dependable company vehicle, high speed laptop, and smart phone

Where is the work: 

At Trane TechnologiesTM  and through our businesses including Trane® and Thermo King®, we create innovative climate solutions for buildings, homes, and transportation that challenge what’s possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go.

What’s in it for you:

Be a part of our mission!  As a world leader in creating comfortable, sustainable, and efficient environments, it’s our responsibility to put the planet first. For us at Trane Technologies, sustainability is not just how we do business—it is our business. Do you dare to look at the world's challenges and see impactful possibilities? Do you want to contribute to making a better future? If the answer is yes, we invite you to consider joining us in boldly challenging what’s possible for a sustainable world.  

This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes. You will be commissioning, troubleshooting, repairing, and starting up HVAC systems in a commercial environment. In order to perform your task you will utilize your knowledge of air conditioning theory, pipe fitting, and mechanical layouts. This position affords you the opportunity to work with internal and external partners ranging from new facility set ups to existing facility retro fits. Trane affords you the opportunity to work directly for a leading manufacturer, giving you access to technical support, training on newest technology and comprehensive career paths with opportunity for growth.

Why Trane Technologies Is The Best Company for HVAC Technicians: 

• Trane is recognized worldwide as the brand standard for HVAC and Building Controls Systems
• Highly competitive and comprehensive total compensation program including total cash compensation, benefits, holiday and vacation
• Dedicated to a military friendly environment (Veterans are highly encouraged to apply)
• Unlimited opportunities for career development and promotions
• Determined focus to be the employer of choice in our industry (we want to be the company where everyone wants to work)
• World Class continuing education, featuring Manufacturer (OEM) Level Training
• Company-wide commitment to promoting a strong work/life balance
• Organizational encouragement of community involvement and sustainability (green initiatives)
• Late model, clean, and dependable company vehicle, high speed laptop, and smart phone

Where is the work: 

Work will be performed in Austin, TX and the surrounding areas.  Prioritize engaging with customers. When not directly interacting with customers; collaborate with colleagues in your office.

What you will do: 

• Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.

• Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.

• Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.

• Displays team effort and dedication to customers by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.

• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.

What you will bring:

• A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred.
• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).
• Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:
  • DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
• EPA Certification 

Additional Requirements and Environmental Exposure:

• Must be able to safely and legally operate a vehicle using a seat belt
• Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
• Must be able to twist the trunk of your body 90 degrees in each direction
• Must be able to squat and touch the floor with both hands
• Must be able to reach your hands over your head
• Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
• This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
• Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
• Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
• Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet +
• This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location

This role has been designated by the Company as Safety Sensitive.

Compensation: 

Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. 

Equal Employment Opportunity: 

We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

What you will do: 

• Coordinates with team leader/project manager and customer to precisely understand requirements for all on-site installation and repairs by forecasting issues, gathering materials and synchronizing on-site work.

• Represents the company by serving as the direct customer contact and is responsible for products and equipment on assigned projects, ensuring customer satisfaction by identifying, diagnosing and repairing equipment and systems at customer’s location.

• Uses cutting edge software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.

• Displays team effort and dedication to customers by maintaining flexibility to work overtime and weekends as the business requires, including occasional overnight stays.

• Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions.

What you will bring:

• A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC. Technical School or formal training is preferred.
• Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).
• Must possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to:
  • DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
• EPA Certification 

Additional Requirements and Environmental Exposure:

• Must be able to safely and legally operate a vehicle using a seat belt
• Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
• Must be able to twist the trunk of your body 90 degrees in each direction
• Must be able to squat and touch the floor with both hands
• Must be able to reach your hands over your head
• Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
• This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
• Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
• Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
• Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet +
• This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location

This role has been designated by the Company as Safety Sensitive.

Compensation: 

Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, geographic location where the work is performed. 

Equal Employment Opportunity: 

We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space & Security (BDS) is seeking an Experienced Operational Software Deployment & Integration Engineer (Level 3) to join our Phantom Works team in Berkeley, MO.

The Operational Software Deployment & Integration Engineer supports field deployment and integration activities while maintaining strong alignment with lab and development teams in St. Louis. This role provides surge capacity, technical depth, and sustainment engineering to ensure smooth transition of releases into operational environments.

Position Responsibilities

• Support on-site software installations, upgrades, and patch validation.
• Assist in system checkout and verification events.
• Validate environment parity between lab and field deployments.
• Reproduce field defects within lab environments for root cause analysis.
• Capture logs, telemetry, and system state data to support diagnostics.
• Support cybersecurity hardening and compliance validation efforts.
• Collaborate closely with Integration & Test teams in St. Louis.
• Validate release packages prior to deployment.
• Ensure configuration consistency across lab and operational environments.
• Support continuous improvement of deployment automation and DevSecOps pipelines.

Travel may be required up to 25% of the time; Domestically and/or internationally depending on business needs.

This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Basic Qualifications (Required Skills/Experience)

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 9+ years related work experience or an equivalent combination of technical education and experience
• 3+ years of experience in software integration, test, DevSecOps, or systems engineering.

Preferred Qualifications (Desired Skills/Experience)

• Familiarity with containerized environments (Docker/Kubernetes) and CI/CD pipelines.
• Understanding of networking fundamentals.
• Experience with configuration management tools.
• Willingness to travel up to 50%
• Secret Clearance with the ability to obtain and maintain TS/SCI.

Conflict of Interest

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Employee Referral

Referral to this job is eligible for bonus to qualifying candidates.

Total Rewards

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $112,200 – $151,800

Applications for this position will be accepted until Apr. 01, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity for an Associate Design & Analysis Engineer to become part of Boeing Test & Evaluation (BT&E) Vehicle Management System (VMS) team in Berkeley, MO or Hazelwood, MO.

You will enable the VMS organization to continue to advance its technologies in support of our Phantom Works and Fixed-Wing programs. The team is responsible for developing integration test assets, real-time software test environments, subsystem/system testing, and evaluating system performance in simulation lab environment. Simulation and modeling are utilized to assist in requirements development, software and hardware development, and equipment verification and validation.

Position Responsibilities:

• Develop electrical schematics and designs for cabling, test hardware, and/or test stations

• Select components for hardware designs and support the procurement and fabrication of hardware designs

• Integrate hardware systems and/or software together in a test setting

• Operate complex test stations, electronic test equipment, and test software

• Test and validate to ensure system designs meet operational and functional requirements

• Solve problems concerning fielded hardware and software over the entire product lifecycle

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 1+ years of experience testing and troubleshooting electronics and electrical systems

• Experience interpreting model-based engineering or 2D engineering drawings to develop technical illustrations

Preferred Qualifications (Desired Skills/Experience):

• 3 or more years related work experience or an equivalent combination of education and experience

• 1+ years of experience conducting component, sub-system, system or system-of-systems tests

• 1+ years analyzing engineering designs to define testing requirements

• Experience preparing test plans, schedules and documentation

• Experience with MATLAB, Simulink, and/or real-time operating systems

• Experience with software programming and creating scripts for automated testing

• Experience with Flight Controls or Vehicle Management Systems

Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $88,400 - $119,600

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Due to our continued growth, we are seeking a Project Scheduler for a project in Queens, NY.

Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again.

Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients.  LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ.

• Schedule Review and Analysis
• Prepare and submit schedule analysis reports
• Help develop a baseline cash flow and resource plan for tracking progress
• Integration and Reporting
• Provide all necessary progress data and analysis for monthly update of Integrated Master Project Schedule (IMPS).
• Risk and Claims Support
• Assist in preparing Time Impact Analyses
• Maintain records of work progress
• Identify potential schedule risks and assist in developing mitigation strategies and schedule recovery efforts for impacted work
• Support the Program Schedule Manager and Commercial Team in claim negotiations and dispute resolution

• Minimum 5-7 years of experience in construction scheduling, preferably on large-scale, complex transit or heavy civil infrastructure projects.
• Experience with Design-Build contracts a plus.
• Proficiency in reviewing and analyzing contractor schedule submittals using software such as Primavera
• Experience with schedule analysis, including critical path methodology, cost/resource loading, and preparing time impact analyses (TIAs).
• Strong analytical and reporting skills.
• Bachelor's degree in Engineering, Construction Management, or a related field is preferred

We are committed to your success, and we invest in your growth and development to unlock your full potential.

• Competitive Total Compensation Package
• Employee- Only Stock Purchase Plan
• Mentoring programs
• Continuing Education Program
• Employee referral bonus
• Volunteer/Industry association opportunities

Our Culture:

We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential.

• We offer a comprehensive benefits package and a positive work environment
• Compensation: Minimum: $75/hr.; Maximum: $86/hr. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position.  Exact compensation will be determined on the individual candidate’s qualifications and location.
• The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role.

LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability.

Please visit our website for all of our career opportunities at  

#ID22

#ZR22

PI c2-3631

ABOUT US:

 At FC Precision, a subsidiary of FC Industries, we don’t just machine parts — we manufacture components that power aerospace engines, support Department of Defense missions, advance medical innovation, and contribute to space exploration. As a trusted partner in high-precision manufacturing, FC Precision specializes in complex, tight-tolerance machining for aerospace and government programs where quality is critical. When our customers are working on mission-critical projects, they rely on us.

• Aerospace engine components
• Department of Defense projects
• Space exploration parts
• High tolerance medical components
• Complex prototype and one-off projects

• Advanced 5-axis machining technology
• High precision work
• Collaborative team environment
• Commitment to innovation and continuous improvement
• Stable, growing company with long-term government and aerospace contracts
• Leadership that values skilled machinists

Here are some of the reasons it’s great to work at FC Industries

• Weekly paychecks 
• Flexible shift start time
• Heating and Air Conditioning in the whole building, including the shop.
• 10% Second Shift Premium 
• Quarterly Profit sharing
• Medical, Dental, Vision Insurance 
• HSA with Company Seed Money
• Life insurance and disability plans 
• Immediate holiday pay 
• Paid Time Off
• 401k retirement savings with company match 
• Pay for school with 100% tuition reimbursement (books included!) 
• On-site café/convenience store 
• Free on-site wellness coaching and YMCA discount 
• Corporate partner discounts through Verizon, Chrysler, GM, and Working Advantage 
• Fun perks such as gift cards, 50/50 drawings, picnics, holiday parties, employee appreciation days...and more! 

CNC MACHINIST ESSENTIAL FUNCTIONS: 

· Setting production machinery for acceptable production processes and obtaining run approval.

· Ability to edit and interpret G and M Code

· Ability to prove out programs and set ups

· Ability to run 5 axis CNC Mills/ Lathes

· Analyze machine, tool, and program issues and makes basic repairs, as well as handling minor routine maintenance.

· Perform repetitive and custom work utilizing fixtures, machine stops, indexing devices, to control critical tolerances and dimensions.

· Assure conformance to quality specifications using a variety of gages and indicators.

· Effectively communicate with personnel at all levels.

· Meet production quantity and quality standards.

· Ensure safety guards and personal protective equipment are in place at all times.

· Follow and enforce work Instructions, procedures, and company policies.

QUALIFICATIONS/COMPETENCIES: 

· Thorough knowledge of specific department equipment and their processes.

· Able to read, write, and comprehend written and oral instructions

· Able to monitor machine sounds to identify and diagnose changes to take appropriate action.

· Must meet DOD eligibility requirements

· Minimum 3-5+ years CNC Machining experience

Compensation details: 25-35 Hourly Wage

PIe0e035a38ffc-3631

FC Precision, a subsidiary of FC Industries, is seeking a skilled Vertical Turning Lathe (VTL) Machinist to join our growing team! FCP is a leading provider of high-quality industrial tools and equipment, specializing in aerospace and Department of Defense. With a strong commitment to innovation, reliability, collaboration, and customer satisfaction, we’ve built a reputation as a trusted partner for some of the most advanced companies in the world — including NASA, SpaceX, GE, and many more. At FC Precision, your work contributes to cutting-edge projects that push the boundaries of technology — from space exploration and government missions to aerospace engine components and beyond.

But it’s not just about what we make — it’s about who we are. We take pride in our positive, team-oriented culture, where every employee is valued and supported. We believe in investing in our people, providing opportunities for growth, development, and long-term success. When you join FCP, you’re not just taking a job — you’re growing your career with a company that truly cares about your goals and your future.
 

Here are some of the reasons it’s great to be a CNC Machinist at FC Industries!

· Competitive Pay

· Family/ team culture that values communication and growth

· Flex start time to accommodate your family

· Great Medical/ Dental/ Vision

· Heating and Air Conditioning in the whole building, including the shop!

· 401k Retirement Plan with strong company match

· Immediate PTO and Holiday Pay 

· Company discounts through Verizon, Chrysler, GM and Working Advantage 

· On-site wellness coaching and YMCA discounts

· On-site cafe/ convenience store

· Fun perks such as gift cards, 50/50 drawings, Queen of Hearts, picnics, holiday parties, employee appreciation days... and more!

Essential Functions as a VTL Machinist: 

· Setting production machinery for acceptable production processes and obtaining run approval.

· Analyzes machine, tool and equipment problems and makes basic repairs, as well as handling process maintenance.

· Continuous improvement of operating methods and procedures designed to eliminate operating problems, increase productivity, and improve product quality.

· Inspect work pieces for conformance to specifications visually or using gages or templates and adjust the machine to correct errors or to reduce process variation.

· Perform repetitive and custom work where fixtures, machine stops, indexing devices, and machining tools are utilized to control critical tolerances and dimensions.

· Validate set-up and quality as needed to meet critical tolerance limits and customer specifications.

· Maintaining and establishing records and documentation of all types as required.

· Ensure all safety guards and personal protective equipment are always in place.

· Follow Work Instructions, procedures, and company policies.

· Other duties as required.

 Qualifications for a Vertical Turning Lathe Machinist: 

· Thorough knowledge of specific department equipment and their processes.

· Able to read, write, and comprehend written and oral instructions

· Able to monitor machine sounds to identify and diagnose changes to take appropriate action.

· Minimum 3-5 years CNC Vertical Turning Lathe experience 

Physical Requirements for a Vertical Turning Lathe Machinist:

· Ability to walk, push, reach overhead and bend to the floor.

· Ability to exert up to 10 pounds of force regularly.

· Ability to perform repetitive movements over an extended period.

· Ability to repeatedly lift objects weighing up to 10 pounds; objects up to 25 pounds occasionally.

Compensation details: 28-34 Hourly Wage

PI344b714be5bf-3631