Engineering Jobs in None Mi Wfh

Embedded Software Engineer – Engine Controls GTM/AUTOSAR CDD development

Auburn Hills, MI

Full time Role

Customer wants Engineer having experience on Engine CDD Development using GTM timer module such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

Must to Have

• Experience with Infineon Generic Timer Module (GTM) for engine timing control.

• Understanding of digital signal processing concepts used in knock detection algorithms.

• Experience with AUTOSAR MCAL configuration using EB Tresos.

Key Responsibilities

• Develop Complex Device Drivers (CDD) for gasoline Engine Control Module (ECM/PCM) functions on ECU platform.

• Implement software for engine sensing and actuation including crank/cam position, engine speed, and direction detection.

• Support development of engine control features such as knock detection windows, spark control, fuel injector control, misfire detection, and manifold air pressure sensing.

• Implement above timing features using GTM-based timing and signal processing logic using modules such as TIM, TOM, ATOM.

• Integrate CDD logic with AUTOSAR BSW modules including NvM, RTE, OS, Digital IO, and Diagnostics.

• Support AUTOSAR BSW integration and ECU software architecture implementation.

• Work with MCAL drivers and support integration activities using EB Tresos Studio (modules such as ADC, DSADC, MCU, FEE, DMA, IRQ).

• Develop and debug software on Infineon AURIX TC38x microcontrollers.

• Support ECU software integration, testing, and debugging using Lauterbach Trace32 and ETAS INCA tools.

• Work closely with calibration, system, and hardware teams to support engine control feature development.

• Support issue analysis and root cause debugging during integration and validation phases.

Required Skills

• Strong Embedded C programming experience.

• Experience with ECM/PCM gasoline engine control software development.

• Hands-on experience in AUTOSAR BSW integration and CDD development.

• Experience with Infineon AURIX TC3xx (TC38x) microcontroller platform.

• Knowledge of engine sensing interfaces such as cam/crank sensors and injector/spark control mechanisms.

• Bachelor’s degree in mechanical engineering
• Thorough knowledge of engineering design & development concepts of automotive BIW system .
• Experience in side body panel, Roof, Floor panel and other BIW components
• Very good proficiency in CATIA V5/V6
• Bachelor’s degree in Mechanical, Engineering.
• 3+ years of proven experience designing high-volume designs of BIW parts
• Development of outer skin panels (A-Surface) in collaboration with OEM Design Studio, Design Engineering, CAE, etc.
• Development of inner panels, reinforcements, brackets and other structural panel
• Ability to create and completion of Sheet metal parts e.g. brackets, Panels, etc
• Design of automotive component parts in CATIA V5. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Strong communication skills, both verbal and written, and capability to drive 10 people offshore team
• Actively engage with Automotive OEM design engineers to collaborate on design projects for trading off cost, mass, joining methods, formability, and performance.
• Interpret CAE simulation results and integrate recommendations into product design
• Strong working knowledge of Design for Manufacturing, including formability with GD&T and dimensional engineering.

Responsibilities

• Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive seating system and subsystem design and development
• Thorough knowledge of engineering design & development concepts of automotive Seating system
• Very good proficiency in CATIA V5/V6. Prepare and execute design release in the 3DExperience PLM system. Experience in creating 3D designs and 2D drawings (e.g. CATIA V5 only)
• Experience in design of Seat and seat components e.g. Cushion Frame, Back frame, Headrest, seat plastic and recliners and track
• Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Seat parts.
• Knowledge and understanding of Tooling and manufacturing processes
• Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&T
• Ability to perform Complete Seat packaging study of seating components
• Working knowledge of regulatory and certification requirements for seating system
• Maintain and develop Design Validation Plans (DVP), and Design Failure Mode Analysis (DFMEA)
• Good knowledge of seating system and component manufacturing processes
• Ability to define seating comfort and define comfort target
• Actively engage with Automotive OEM / Tier-I design engineers to collaborate on design projects for trading off cost, mass, joining methods, molding and testing performance.
• Propose and promote design improvement approaches including cost reduction and design optimization
• Complete and release Seating system, sub-system and detail designs
• Interpret CAE simulation results and integrate recommendations into product design

• Collaborate with seating suppliers and support overall vehicle development milestones and prototype/production build events

• Must have ability to perform feasibility studies, Check A-class surface and define craftsman ship target.

• Meet project deliverables commitments and timelines

• Design of automotive component parts in CATIA V5/V6

• Strong communication skills, both verbal and written, and capability to drive offshore team.

Project Engineer - Fluid Power Hydraulics

We're seeking a skilled Project Engineer with expertise in fluid power hydraulics to join our team. In this role, you'll complete engineering projects by organizing and controlling project elements, with a strong focus on designing fluid power systems from cradle to grave. This includes starting with initial concepts, collaborating with cross-functional teams through development, building, and shipping the final product. Approximately 80% of the work involves hydraulics (pumping oil), with 20% focused on water or lubrication systems. You'll also improve engineering drawings and ensure that all components and systems sent to the shop floor are fully engineered for form, fit, and function.

Objective:

Complete engineering projects by organizing and controlling elements, emphasizing fluid power hydraulics design and system integration.

Essential Functions:

• Assist with preparation of proposals for fluid power systems, as directed by the Project Manager.
• Conduct engineering reviews of jobs, ensuring form, fit, and function of components in fluid power applications.
• Write change orders as required.
• Answer questions for manufacturing personnel during the build process.
• Develop project objectives by reviewing proposals and plans, conferring with management.
• Determine project responsibilities by identifying phases and elements, assigning personnel, and reviewing bids from contractors.
• Determine project specifications by studying product design, customer requirements, and performance standards; complete technical studies and prepare cost estimates.
• Confirm product performance by designing and conducting tests on fluid power systems.
• Determine project schedule by studying plans and specifications, calculating time requirements, and sequencing elements.
• Maintain project schedule by monitoring progress, coordinating activities, and resolving problems.
• Design fluid power systems from concept to completion, including simple circuitry integration.
• Improve engineering drawings and verify that all designs for the shop floor are thoroughly engineered.

Competencies:

• Program/Project Management
• Professional Knowledge in Fluid Power Hydraulics
• Engineering Design/Analysis (with emphasis on fluid power systems)

Required Education & Experience:

• Degree not required but is a plus.
• Knowledge of AutoCAD.
• Prior engineering experience, including hands-on design of fluid power systems.
• Experience designing fluid power hydraulics systems, including simple circuitry.

Preferred Experience:

• SolidWorks

Key Responsibilities

• Act as a Proxy Product Owner representing the client’s strategic interests within a global delivery organization.
• Serve as the central coordinator for product requirements across multiple stakeholder groups, ensuring alignment between business objectives and technical delivery.
• Manage prioritization of product features and initiatives to ensure maximum business value and efficient project execution.
• Facilitate communication between global development teams, client stakeholders, and third-party vendors.
• Ensure product development aligns with enterprise architecture, governance standards, and customer experience goals.
• Guide the creation and evolution of a digital parts-commerce platform built on Adobe Commerce and AEM.
• Support program coordination across three simultaneous global delivery pods working on a large-scale eCommerce implementation.
• Evaluate stakeholder requests and make strategic product decisions to protect project scope, budget, and long-term product integrity.
• Maintain strong documentation and organization of product requirements, dependencies, and roadmap priorities.
• Collaborate closely with engineering, UX, and program leadership to deliver a high-quality, scalable commerce platform.

Required Qualifications

• 5+ years of experience as a Product Owner, Product Lead, or Strategic Product Consultant in a large, matrixed organization.
• Proven ability to influence cross-functional stakeholders and lead initiatives without direct authority.
• Strong experience acting as a client proxy in consulting, agency, or enterprise environments.
• Functional knowledge of Adobe Commerce (Magento) and Adobe Experience Manager (AEM) ecosystems.
• Experience working on complex enterprise eCommerce platforms.
• Strong communication, organizational, and coordination skills with the ability to manage multiple stakeholders and dependencies.
• Experience collaborating with third-party vendors and technology partners.
• Must be based in the Detroit metropolitan area and able to work onsite four days per week.

Preferred Qualifications

• Deep knowledge of the Automotive Aftermarket industry, including the complexities of automotive parts data such as fitment, shipping constraints, and core charges.
• Experience with motor parts, accessories, or parts-sales commerce platforms.
• Familiarity with Scaled Agile Framework (SAFe) or similar enterprise agile frameworks designed for cross-departmental coordination.
• Experience managing third-party vendors supporting automotive data, logistics, or parts distribution systems.
• Background in management consulting or digital agency environments supporting enterprise clients.

Role Overview

The BMS (Battery Management System) Architect – AUTOSAR BSW Development is responsible for defining, designing, and guiding the implementation of the BSW software architecture for Battery Management Systems based on the AUTOSAR Classic Platform.

This includes ownership of the AUTOSAR BSW stack integration, ECU architecture, safety concept alignment, and software interfaces for highvoltage battery functions such as SOC/SOH/SOE estimation, cell monitoring, diagnostics, thermal management, and communication.

The architect collaborates closely with system engineering, functional safety, hardware engineering, and platform software teams to ensure a compliant, scalable, and production-ready BMS software solution.

Key Responsibilities

• Define and maintain the AUTOSAR-based BMS ECU Software Architecture including BSW and CDD module distribution in multicore environment.
• Own BSW configuration & integration (MCAL, ECU Abstraction, Services, Communication stack).
• Ensure design is compliant with ISO 26262 (ASILD)
• Participate in safety work products: FMEDA, safety concepts
• Collaborate on cybersecurity requirements aligned with ISO 21434.
• Provide technical direction to AUTOSAR BSW developers and integrators.
• Act as technical liaison with OEM, Tier-1 suppliers, AUTOSAR vendors, and toolchain providers.

Required Skills & Qualifications

• Strong experience in AUTOSAR Classic Platform (BSW CAN Stack, MCAL, RTE, Multicore OS, MPU, SMU, NVM, Diagnostics like UDS, ZEV, OBD).
• Hands-on experience with tools: ETAS ISOLAR tool, EB Tresos, Vector CANdela, CANoe, INCA, PREEvision.
• Deep understanding of - Functional safety (ISO 26262), BMS high-voltage system behavior, MCU architectures (Infineon AURIX TC3xx)
• Strong embedded C expertise
• Strong communication and cross-functional leadership
• Ability to handle OEM discussions on architecture topics.

Key Responsibilities

• Develop and support the design of exterior components and assemblies from concept through production using CAD. Ensure designs meet functional, aesthetic, and manufacturability requirements.
• Manage the release of production-ready parts, drawings, and Bills of Material (BOM) through PLM systems such as Teamcenter while supporting program milestones and engineering documentation.
• Work closely with suppliers on feasibility, design for manufacturing (DFM), tooling development, and technical reviews to ensure parts meet cost, quality, and timing targets.
• Support validation activities including DVP&R development, testing coordination, and design verification to ensure components meet durability, fit, finish, and performance standards.
• Partner with Styling, Studio, Manufacturing Engineering, CAE, and Program Management teams to ensure exterior components align with vehicle styling intent and production requirements.
• Support DFMEA development and manage engineering changes (ECR/ECO) to resolve design issues and improve product quality throughout the development cycle.
• Provide engineering support during prototype builds, pilot builds, and production launch to address fit, finish, and assembly concerns.

Required Qualifications

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or a related engineering discipline.
• 3–8+ years of experience in automotive exterior trim design, development, or release engineering.
• Experience using CATIA V5/V6, or similar CAD software for 3D modeling and design development.
• Understanding of plastic injection molding, composite materials, tooling development, and painted exterior components.
• Experience with GD&T, DFMEA, DVP&R, and PPAP processes.
• Familiarity with automotive regulatory requirements such as NHTSA and FMVSS related to exterior vehicle components.

Job Title : BMS Architect – AUTOSAR & BSW Development

Location: Auburn Hills, MI

Duration: Full time

Role Overview

The BMS (Battery Management System) Architect – AUTOSAR BSW Development is responsible for defining, designing, and guiding the implementation of the BSW software architecture for Battery Management Systems based on the AUTOSAR Classic Platform.

This includes ownership of the AUTOSAR BSW stack integration, ECU architecture, safety concept alignment, and software interfaces for highvoltage battery functions such as SOC/SOH/SOE estimation, cell monitoring, diagnostics, thermal management, and communication.

The architect collaborates closely with system engineering, functional safety, hardware engineering, and platform software teams to ensure a compliant, scalable, and production-ready BMS software solution.

Key Responsibilities

1. Define and maintain the AUTOSAR-based BMS ECU Software Architecture including BSW and CDD module distribution in multicore environment.

2. Own BSW configuration & integration (MCAL, ECU Abstraction, Services, Communication stack).

3. Ensure design is compliant with ISO 26262 (ASILD)

4. Participate in safety work products: FMEDA, safety concepts

5. Collaborate on cybersecurity requirements aligned with ISO 21434.

6. Provide technical direction to AUTOSAR BSW developers and integrators.

7. Act as technical liaison with OEM, Tier-1 suppliers, AUTOSAR vendors, and toolchain providers.

Required Skills & Qualifications

1. Strong experience in AUTOSAR Classic Platform (BSW CAN Stack, MCAL, RTE, Multicore OS, MPU, SMU, NVM, Diagnostics like UDS, ZEV, OBD).

2. Hands-on experience with tools: ETAS ISOLAR tool, EB Tresos, Vector CANdela, CANoe, INCA, PREEvision.

3. Deep understanding of - Functional safety (ISO 26262), BMS high-voltage system behavior, MCU architectures (Infineon AURIX TC3xx)

4. Strong embedded C expertise

5. Strong communication and cross-functional leadership

6. Ability to handle OEM discussions on architecture topics.

Job Title– Electrical Engineer

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

HCLTech is looking for a highly talented and self-motivated 3DExperience Architect to join it in advancing the technological world through innovation and creativity.

Job Title: 3DExperience Architect

Job ID: 68964

Position Type: Fulltime

Location: Dearborn, MI

Key Responsibilities

PLM Architecture & Configuration

• Architect, configure, and customize ENOVIA 3DExperience PLM solutions to support enterprise-level product lifecycle management requirements.
• Perform data modeling, attribute creation, schema modifications, and configuration of ENOVIA business objects.
• Evaluate and optimize PLM system performance, scalability, and integration readiness.

Technical Development

• Develop and maintain PLM customizations using MQL, TCL, JPO, XML, and SQL.
• Create integrations with CAD tools such as Creo and SOLIDWORKS.
• Design and implement SOA services, REST/SOAP APIs, and web services for seamless integration with CAD, ERP, MES, and legacy enterprise systems.

Process Enablement & Engineering Support

• Support engineering and manufacturing teams by mapping and configuring PLM solutions aligned with:
• Engineering processes
• BOM (Bill of Materials) Management
• Change Management (ECR/ECN workflows)
• Manufacturing process planning
• Configuration and variant management

Migration & Data Transformation

• Lead and execute PLM data migration activities from legacy systems to 3DEXPERIENCE using:
• 3DEXPERIENCE Transition Assistant
• EDAT (Engineering Data Assessment Tool)
• DBDI (Database Data Import)
• XPDMXML framework
• Ensure data integrity, validation, reconciliation, and smooth transition into production environments.

Collaboration & Documentation

• Work closely with cross‑functional teams including Engineering, IT, Manufacturing, and Program Management.
• Create detailed technical specifications, design documents, test plans, and user guides.
• Provide training, troubleshooting, and technical support to internal teams and stakeholders.

Required Skills & Qualifications

• Strong expertise in ENOVIA 3D Architecture and 3DEXPERIENCE PLM configuration.
• Experience with MQL, TCL, JPO, XML, SQL, and familiarity with CAD tools (Creo, SOLIDWORKS).
• Solid understanding of SOA architecture, system interfaces, and enterprise application integration.
• Deep knowledge of Engineering + Manufacturing processes, including BOM, revisions, configurations, and workflows.
• Proven experience with data migration tools and PLM data transformation mechanisms.
• Excellent problem-solving, communication, and collaboration skills.

Pay and Benefits

Pay Range Minimum: $114000 per year

Pay Range Maximum: $175000 per year

HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You’ll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Job Title: Automotive Training and Development Consultant

Duration: 12 Months (Possibility of extension)

Location: Detroit, Michigan

Client is looking for an Automotive Training & Development Consultant located in the Detroit, Michigan area.

This position is responsible for analysis, research, development and delivery of manufacturing processes and technical launch training with on-site support to OEM vehicle assembly plants in the US, Canada and Mexico.

Roles and responsibilities include:

• Provide on-site training and support at each of the OEM vehicle assembly plants
• Instruct and consult plant process and repair personnel to improve their understanding of the vehicle and its highly intricate and interconnected systems and subsystems
• Present and demonstrate efficient and effective methods of diagnosing and correcting vehicle assembly, vehicle electrical systems and sub-system deficiencies
• Conduct root cause analysis to accurately identify the cause(s) of assembly and vehicle deficiencies
• Act as the training liaison between product/manufacturing engineering and general assembly by creating, designing and developing training materials related to vehicle assembly process, electrical harness manufacture, vehicle electrical system architectures and schematics
• Communicate and share lessons learned, developed training materials and information gathered in support of one plant project with remaining plants on a timely basis
• Analyze and identify future training needs for each of the OEM vehicle assembly plants
• Support and participate in plant launch meetings and provide training reports to Raytheon management, the OEM management and OEM launch teams
• Interface with engineering, component suppliers and vendors to validate and develop training materials for the manufacturing process, vehicle and vehicle electrical sub-systems prior to the Start of Regular Production (SORP)
• Research and compile manufacturing processes and technical information to be included in training course materials, such as, but not limited to engineering schematics, work in process service information, engineering documents, engineering math data and manufacturing reports

Required Skills:

• Minimum four years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor
• Demonstrated knowledge of automotive systems from an advanced diagnostics perspective
• Demonstrated knowledge of OEM manufacturing tracking and reporting systems
• Demonstrated knowledge of OEM manufacturing dynamic vehicle testing systems
• Ability to develop professional training materials using pre-launch documents
• Ability to read and interpret a digital multimeter, OEM diagnostic scan tool and other automotive related diagnostic test equipment
• Ability to effectively conduct one-on-one and group presentations Ability to interpret early engineering level electrical schematic diagrams
• Ability to read OEM supplier electrical harness prints
• Strong working knowledge of Microsoft Office
• Extensive travel flexibility. Upward of 75% travel, depending upon launch
• Ability to work independently without supervision
• ASE certifications
• Demonstrated presentation skills delivering process and technical training
• Automotive technical assistance center experience

Required Education:

• Associate's degree or Certificate in Automotive Technology, engineering or other related discipline
• High school diploma with eight years of experience as an automotive instructional designer, training developer, automotive instructor and/or manufacturing instructor may be considered in lieu of an associate’s degree