Engineering Jobs in Murphy Texas
87 positions found — Page 3
Circuit Board Repair Technician (RICHARDSON)
Salary not disclosed
JOB SUMMARY
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
temporary
Manufacturing Operations Engineering Lead (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‑growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‑mix/high‑volume PCB assembly and secondary processes.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
temporary
S
Manufacturing Supervisor - 2nd Shift (3:30pm - Midnight)
🏢 Sol-Ark
Salary not disclosed
About us
Sol-Ark is a Veteran-owned solar and battery-based technology manufacturer based in Texas. Our mission is making the most reliable, innovative, and affordable solar storage solutions to power families & their businesses. Founded in 2013, the company has experienced massive, organic growth due to our equipment being 3x more powerful and capable than best-in-class alternatives. It is a fast-paced, yet casual work environment. We are a close-knit team looking to make significant contributions to a very fast-growing industry that values merit, character, aptitude, sustainability and self-reliance.
Job Description
Location: This position will be based in our corporate headquarters in Allen, Texas (Dallas-Fort Worth area)
Please use this link to apply directly to Careers Page: are seeking a detail-oriented and proactive Shift Manufacturing Supervisor – Afternoon Shift to join our team, to oversee our mechanical electronic assembly operations. The ideal candidate will be responsible for managing daily production activities, ensuring adherence to quality standards, and leading a team of assembly technicians to meet production goals efficiently.
Responsibilities:
- Supervision and Leadership: Manage and mentor a team of assembly associates, technicians, or any other assigned personnel, providing guidance, training, and performance evaluations to ensure a skilled and motivated workforce.
- Production Management: Oversee the assembly of mechanical and electronic components, ensuring production schedules are met and products comply with quality specifications.
- Workflow Optimization: Develop and implement efficient workflow processes, monitor production metrics, and identify areas for improvement to enhance productivity and reduce costs.
- Quality Assurance: Establish and enforce quality control standards according to the quality management system (QMS), conduct regular inspections, and collaborate with the quality assurance team to address any issues promptly.
- Safety Compliance: Ensure all assembly operations adhere to company safety policies and regulatory requirements, promoting a culture of safety awareness among staff.
- Resource Coordination: Manage inventory levels of assembly materials, coordinate with the procurement team for timely replenishment, and ensure optimal utilization of resources.
- Reporting: Prepare and present regular reports on production performance, quality metrics, and other relevant data to senior management.
Requirements
- Education: High school diploma or equivalent required; a Bachelor’s degree in Industrial Engineering, Manufacturing Technology, or a related field is preferred.
- Experience: Minimum of 3 years of supervisory experience in a manufacturing environment, specifically in mechanical and electronic assembly.
- Technical Proficiency: Strong understanding of assembly equipment, tools, and processes, with the ability to read and interpret technical drawings and schematics.
- Leadership Skills: Proven ability to lead and develop a team, with excellent communication and interpersonal skills.
- Problem-Solving: Demonstrated aptitude for identifying operational issues and implementing effective solutions promptly.
- Organizational Abilities: Strong organizational and time-management skills, with the capacity to manage multiple priorities in a fast-paced environment.
- Software Knowledge: Proficiency in Microsoft Office Suite; experience with manufacturing software systems (e.g., SAP, NetSuite, Oracle) is a plus.
Salary and Benefits: We offer a competitive salary and performance-based bonus program, top-tier benefits package, including medical, dental, and vision insurance, 401(k), and paid time off.
Not Specified
S
Sales Representative
Salary not disclosed
Job Description
Job Description
ScaleHouse Talent is the specialized recruiting engine behind the fastest-growing home remodeling companies in America. We don't just fill seats; we align high-performers with organizations that offer the best leads, the best products, and the highest commissions in the industry.
We are currently seeking a Heavy-Hitter Outside Sales Representative for our premier partner in the DFW market. This company is a Texas-based powerhouse, recognized as a Top Place to Work and a leader in high-end bathroom, kitchen, and window transformations. They have the infrastructure of a national giant but the heart of a local legend.
What's In It For You?
* Uncapped Commissions: Realistic six-figure earning potential. Average performers earn $120k-$160k; our top producers are clearing $200k+
* High-Intent Leads: You will be provided with 8-10 pre-set, qualified appointments per week generated by massive national and regional partnerships.
* The "You Sell It, We Install It" Model: Backed by W2 installers and a dedicated production team. You focus on the contract; they focus on the craftsmanship.
* Full Benefits: Comprehensive medical, dental, and vision packages.
* Elite Training: Two weeks of comprehensive training with world-class field support.
What You'll Do
* In-Home Consultations: Meet with homeowners in the DFW area to design and sell premium remodeling solutions.
* Consultative Excellence: Conduct 90 minute presentations, building rapport and educating homeowners on value over price.
* Master the Close: Confidently navigate objections and secure contracts during the initial visit.
* Professional Representation: Act as the face of a brand known for "People-First" values and exceptional community impact.
What You'll Need
* The "Closer Instinct": A proven track record in "one-call close" or high-ticket sales environments.
* Resilience: You thrive in a performance-based, commission-only structure where you are rewarded for your output.
* Flexibility: Mandatory one weekend day a week—when homeowners are actually home and ready to buy.
* Tech Literacy: Proficiency in using iPad-based design tools and CRM systems.
Who Is ScaleHouse Talent?
We are not a traditional "recruiting agency." We are growth partners for the elite. ScaleHouse exclusively represents brands that offer stability, premium compensation, and a winning culture. Our vetting process is rigorous because our clients only want the best. When you apply through ScaleHouse, you aren't just another resume in a pile—you are being positioned for a career-defining role with a market leader.
Job Description
ScaleHouse Talent is the specialized recruiting engine behind the fastest-growing home remodeling companies in America. We don't just fill seats; we align high-performers with organizations that offer the best leads, the best products, and the highest commissions in the industry.
We are currently seeking a Heavy-Hitter Outside Sales Representative for our premier partner in the DFW market. This company is a Texas-based powerhouse, recognized as a Top Place to Work and a leader in high-end bathroom, kitchen, and window transformations. They have the infrastructure of a national giant but the heart of a local legend.
What's In It For You?
* Uncapped Commissions: Realistic six-figure earning potential. Average performers earn $120k-$160k; our top producers are clearing $200k+
* High-Intent Leads: You will be provided with 8-10 pre-set, qualified appointments per week generated by massive national and regional partnerships.
* The "You Sell It, We Install It" Model: Backed by W2 installers and a dedicated production team. You focus on the contract; they focus on the craftsmanship.
* Full Benefits: Comprehensive medical, dental, and vision packages.
* Elite Training: Two weeks of comprehensive training with world-class field support.
What You'll Do
* In-Home Consultations: Meet with homeowners in the DFW area to design and sell premium remodeling solutions.
* Consultative Excellence: Conduct 90 minute presentations, building rapport and educating homeowners on value over price.
* Master the Close: Confidently navigate objections and secure contracts during the initial visit.
* Professional Representation: Act as the face of a brand known for "People-First" values and exceptional community impact.
What You'll Need
* The "Closer Instinct": A proven track record in "one-call close" or high-ticket sales environments.
* Resilience: You thrive in a performance-based, commission-only structure where you are rewarded for your output.
* Flexibility: Mandatory one weekend day a week—when homeowners are actually home and ready to buy.
* Tech Literacy: Proficiency in using iPad-based design tools and CRM systems.
Who Is ScaleHouse Talent?
We are not a traditional "recruiting agency." We are growth partners for the elite. ScaleHouse exclusively represents brands that offer stability, premium compensation, and a winning culture. Our vetting process is rigorous because our clients only want the best. When you apply through ScaleHouse, you aren't just another resume in a pile—you are being positioned for a career-defining role with a market leader.
Not Specified
U
Information Technology Professional
🏢 US Navy
Salary not disclosed
When warfare moves at the speed of technology, we need personnel who can always keep us one step ahead of our enemies. As an Information Professional Officer, you lead your team of Enlisted Information Systems Technicians to ensure the delivery of communications capabilities by operating, maintaining and securing our networks around the globe. Assist with top secret cyberwarfare missions and discover tactical and strategic advantages afloat and ashore. IPO is a big job, but your team will always have your back.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Information Professional Officer
More Information
Responsibilities
Information Professional Officers (IPOs) oversee the seamless operation of the global Naval network environment. Their responsibilities include:
- Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
- Driving interoperability with joint, allied and coalition partners
- Building professional excellence through education, training and certification and milestone qualifications
- Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
- Helping to develop and deploy information systems, command and control and space systems
- Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
- Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology
Work Environment
Information Professionals serve in challenging roles of increasing scope and responsibility both afloat and ashore. This could include:
- Serving as part of Battle Group staffs on ships at sea
- Working in C4I/Space/Surveillance on shore tours
- Serving on major Navy and joint staffs
- Serving in command of key communication and surveillance facilities around the globe
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Upon completion, candidates typically attend a five-week IP Basic Course of instruction in Pensacola, FL, before or during their initial assignment. IPOs must complete specific qualifications as part of their training during Fleet tours and are expected to pursue advanced education opportunities.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Information Professional Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Postgraduate education is important to the success of the Information Professional. Most IPs will complete a master's degree in C4I, space, information systems, computer science or modeling and simulation.
There's also potential to pursue a graduate certificate, DoW certifications, federal executive fellowships and information assurance scholarships and internships.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. Candidates seeking an Information Professional Officer position must have a bachelor's degree from a regionally accredited institution in a technical field, preferably in one of following fields: Information Systems, Electrical Engineering, Computer Engineering, Information Operations, Computer Science, Systems Engineering, General Engineering.
All candidates must also be: U.S. citizens, willing to serve worldwide, eligible for a Top Secret/Sensitive Compartmented Information (SCI) security clearance and qualified for sea duty.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as an Information Professional Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Information Professional Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Information Professional Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Information Professional Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as an Information Professional Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
SMT Principal Engineer - Opportunities for Leadership and Innovation (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Test Engineering Tech II - Collaborative Cross-Functional Team Environment (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
Test Engineering Tech II (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
SMT Principal Engineer (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Surface Mount Process Development Expert (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
jobs by
✓ All jobs loaded