Engineering Jobs in Monroe Ohio

Compensation details: 1 Yearly Salary

PIa3124d977fd4-3631

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

  Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

CTDI is a large-scale logistics repair and engineering company that services the world's largest telecommunications and cable providers. CTDI has over 10,000 employees in over 58 US Operations and a global footprint with more than 19,000 employees worldwide.

The Inventory Control Clerk is responsible for managing and maintaining accurate inventory records.

Shift Schedule: 7:00am - 5:30pm, Sunday thru Wednesday

Duties and Responsibilities

• Conducting regular inventory counts and audits to ensure accuracy.
• Identifying and investigating discrepancies in inventory records.
• Verifies stock information and unit identification numbers.
• Stores and retrieves equipment and/or parts for work orders.
• Responsible for ensuring the proper maintenance of labeling and signage across the facility.
• Comply with quality performance standards.
• Perform various routine clerical duties, including data entry into CTDI systems using both PC and RF handheld devices.
• May coordinate with other departments to optimize inventory management processes.
• Maintains the work area and equipment in a clean and orderly condition.
• Responsible for following warehouse safety regulations.
• All other duties assigned, based on the business the warehouse supports.

Required Skills and Experience

• Basic knowledge of computers programs for entering data.
• Ability to work independently and in a team environment.
• Thoroughness and attention to detail in task completion.
• Competent in maintaining accurate and organized records.
• Ability to work in a fast-paced environment.

Preferred Skills and Experience

• Previous experience working in a high-volume distribution, manufacturing, technical service (i.e. testing and repair) or forward logistics operation a plus.
• Previous experience with inventory management software.
• Handles basic issues and problems and refers more complex issues to higher-level staff.
• Time-management skills.
• Written and verbal communication skills.

Educational Requirements

• High school diploma or equivalent work experience.

Physical Demands and Working Conditions

• Warehouse environment.
• The ability to lift, push and/or pull up to 50 lbs., if necessary.
• The ability to stand and walk for an extended period of time, if necessary.
• The ability to bend, push, pull, twist, and reach in a continuous/repetitive capacity, if necessary

You will love working in our family-oriented company! When you join our family, you will enjoy perks such as:

• Weekly pay every Thursday
• Monthly Incentive Bonus
• Positive, team-oriented, inclusive workplace
• Health, Dental, Vision, & Prescription Coverage
• Paid holidays, vacation, & sick/personal time

Benefits

• Health insurance
• Dental insurance
• Vision insurance
• 401(k)
• Life insurance
• Disability insurance
• Employee assistance program
• Flexible spending account
• Tuition reimbursement

Work Authorization

• United States (Required)
• Must be 18 years of age

Apply today to join our dynamic team! CTDI offers an excellent compensation and benefits package and has been a growing leader in the telecommunications field for over 40 years. Come put our successful history behind your career!

CTDI is an equal opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. This policy applies to every aspect of employment at CTDI, including recruitment, hiring, training, advancement, and termination.

This position does not qualify for visa sponsorship.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 2nd shift (Onsite)

What You Will Do:

Job Description

• Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts.

• Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

Qualifications we prefer:

• 1-3 years of machining experience.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment. This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

EV5 Job code: PWH77771 (Production Machinist/Proc C)

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift .

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious.

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

This position is for 2nd shift. Hours are Monday - Friday 3:12pm - 11:59pm.

What You Will Do :

• Under direction of leader/supervisor, follow assembly drawings and/or specifications and computer information systems to prepare parts and build subassemblies, modules and accessories for new gas turbine engines where tooling and process methods are established. Perform similar duties assisting with engine test operations and performing component and accessory tests as assigned.

• Use overhaul and repair procedures and specifications to perform the mechanical work to overhaul engines, modules and related components.

• Obtain parts, check details for conformance to assembly requirements and fit and measure components to assure overall dimensions are within limits specified.

• Use mechanic’s hand tools, holding fixtures, and specialized assembly equipment to build engine sections and perform installation of details and maintain equipment and tooling for assigned areas.

• Provide related support for test operations and assist with testing under direct supervision and specific test schedules.

• Perform similar duties to assist with co-producer, customer support or other similar programs, retrofit projects and to accommodate new engine programs and assist with changes in specifications.

Qualifications You Must Have :

• High School Diploma or Equivalent & formal training in a specialized field achieving A&P license or equivalent OR 4 years of technical high school including technical post high school certification and 5+ years of heavy automotive experience.

Qualifications We Prefer:

• Experience as an aerospace mechanic or A&P mechanic preferred.

• 3 + years avionics mechanic experience.

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift .

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Automation Technician

Location: Onsite; Monroe, OH

Employment Type: Full-Time /Contract-to-Hire

Pay: $28-32/hour

1st Shift: 6am-3pm M-F

Position Overview

We are seeking Automation Technicians with hands-on experience supporting automated manufacturing, robotics, or warehouse automation environments. This role is critical to maintaining continuous system operation and minimizing downtime across highly automated equipment and production systems.

The ideal candidate is comfortable troubleshooting complex electromechanical systems, and performing both reactive and preventive maintenance in a fast-paced, high-automation setting.

What You’ll Be Doing

• Maintain continuous operation of automated, robotic, and material handling systems by adjusting, repairing, replacing, or modifying components
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems and return equipment to service quickly and safely
• Perform scheduled preventive maintenance on robotic systems and process support equipment
• Read and interpret electrical schematics, mechanical diagrams, and complex automated system drawings
• Work with PLC-controlled equipment and assist in automation system diagnostics
• Identify machine malfunctions, isolate root causes, and implement cost-effective repairs
• Perform equipment calibrations, re-qualifications, and system validations per schedule
• Assist engineers and automation teams with equipment installation, removal, and system qualification
• Support corrective action reports and process improvement initiatives
• Disassemble equipment, inspect components for defects, and repair or replace parts as needed
• Support both hardware and, at higher levels, limited software maintenance activities

Required Experience and Skills

• Background in automated manufacturing, robotics, material handling systems, or automated warehouse environments
• Strong electrical and mechanical troubleshooting skills
• Experience with PLC-controlled equipment is a plus
• Ability to read electrical schematics and mechanical drawings
• Preventive and corrective maintenance experience in high-volume or automated settings
• Solid computer and documentation skills

Technical Experience Preferred

• Automation, robotics, or conveyor/material handling systems
• Electronic assembly and troubleshooting (schematics, PCB loading, mechanical assembly)
• Cable and harness work (crimping, soldering, connector assembly, cable prep)
• Testing equipment such as oscilloscopes, logic analyzers, and cable/harness testers
• Automated machine operations (surface mount, component insertion, wave soldering)
• Mechanical and electrical tools including alignment tools, measuring tools, taps & dies, and power/air tools

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Are you an experienced R&D Engineer with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced R&D Engineer to work at their company in Valencia, CA.

Position Summary: The manager is looking for a Sr R&D Engineer who would perform test method dev and validation, fixture and tooling design using SolidWorks, updates to product drawings using SolidWorks, as well as creation of traceable documentation, such as spec maps and DFMEAs.

Primary Responsibilities/Accountabilities:

• Ensuring all Design Controls aspects
• Developing new requirements, sourcing new requirements, creating and validating new test methods, creating new risk documentation, and performing all applicable testing
• Supporting manufacturing moves from one vendor to another.
• Maintains product safety, quality, and compliance of all products.
• Trained in all aspects of change management (DCA, SCIA, SCAR, and PLCP).
• Supports any applicable R&D projects, planning and activities.
• Understands and complies with all the regulations governing the quality system.
• Supports additional activities required by the business.
• Designing and developing new tools and fixturing using SolidWorks for use in test method development and validation.
• Build Quality into all aspects of their work by maintaining compliance to all quality requirements.
• Provides engineering support for design control activities.
• This position is a contract role, expected to be completed by the end of September 2026.
• Provides oversight of the design, quality, manufacturing, and project-related activities.
• Coordinates with internal functions and external suppliers to identify and execute projects.
• Applies project management and problem-solving skills to manage multiple activities concurrently. Develops products, materials, processes, or equipment for projects of moderate complexity. Under limited supervision/guidance, compiles, analyzes, and reports operational, test, and research data to establish performance standards for newly designed or modified products, processes, and materials.

Qualifications:

• 5+ years working with design controls.
• 5+ years working within FDA Quality System Regulations and ISO 13485.
• Experience with assessing quality and compliance impact on products for design and process changes.
• Experience with design verification and validation activities.
• Experience with Test Method development.
• Experience in troubleshooting and root cause analysis.
• Self-motivated individual who can work independently.
• Working knowledge of MiniTab and SolidWorks.
• Good writing (assessments, protocols, reports, and email) and verbal communication skills.

Preferred:

• Has led 4+ projects to drive product design changes or process changes preferred.
• 3+ years of mechanical design experience.
• Has participated in 4+ new product development projects, related product transfer and scale-up activities preferred.
• SAP and Windchill experience is a plus.
• Human Factors / Usability experience is a plus.

Job Description:

The Pharmacy Engineering Technician 3 oversees logistics, fabrication, installation, operation, application, maintenance, and repair of mechanical and electromechanical machines, equipment, tools, motors and systems The Pharmacy Engineering Technician 3 performs advanced administrative/operational/customer support duties that require independent initiative and judgment. May apply intermediate mathematical skills.

The Pharmacy Engineering Technician 3 ensures maintenance and continuous improvement of quality and industry standards, evaluates mechanical products to determine cost effectiveness and efficiency, oversees and implements prescription drug distribution equipment and recommends design modifications to eliminate malfunctions, reduce cost-to-fill, increase throughput and improve quality, performs and leads tests of related software and equipment to ensure proper operation and freedom from defects, and devises improvements to current procedures and develops models of possible future configurations. Decisions are typically focus on methods, tactics and processes for completing administrative tasks/projects. Regularly exercises discretion and judgment in prioritizing requests and interpreting and adapting procedures, processes and techniques, and works under limited guidance due to previous experience/breadth and depth of knowledge of administrative processes and organizational knowledge.

Responsibilities:

• Perform preventive maintenance, inspections, and repairs on electrical and mechanical equipment, devices and components.

• Troubleshoot, routinely inspect equipment and electro-pneumatic controls as necessary on automated equipment.

• Report to Maintenance Supervisor on equipment condition and status as necessary.

• Install all new equipment including electrical, mechanical, pneumatic, electronic, and computer systems.

• Maintain an extremely clean work environment.

• Reduce machine downtime, improve throughput and overall performance of machines.

• Maintain preventative maintenance schedules by thoroughly documenting all issues, repairs, parts used, recommendations, etc.

• Must possess a sense of urgency on troubleshooting and repairing equipment for minimal downtime.

• Possess excellent project/assignment completion record.

• Ability to work independently.

Requirements

• 4-5 years of electrical/mechanical experience

• POS programing knowledge

• Knowledge of Allen Bradley PLCs

Position Summary:

The purpose of the Quality Manager is to lead and manage our Quality Management System (QMS) and ensure that products, processes, and services consistently meet internal standards and customer expectations.

This role is responsible for ISO 9001 compliance, customer complaint resolution, CAPA management, internal and external audits, process improvement initiatives, and fostering a strong quality culture across operations. The Quality Manager partners cross-functionally with Operations, Engineering, Supply Chain, Service, and Sales to drive continuous improvement and operational excellence.

Key Responsibilities

• Provide leadership and guidance for Quality Assurance activities supporting Operations, Sales, Service, Distributors, and Customers.
• Support the development and maintenance of the Quality Policy and Quality Management System (QMS), ensuring quality objectives are established, tracked, and achieved.
• Develop and execute an internal audit program; conduct audits and support customer and regulatory inspections.
• Ensure timely response to customer complaints and support resolution within established service standards.
• Support Quality System deployment, including implementation, documentation control, regulatory compliance, and product release sign-offs.
• Plan and implement quality policies, procedures, and continuous improvement initiatives to ensure products and services meet internal and customer standards.
• Conduct Management Review meetings to ensure ongoing performance and effectiveness of the Quality Management System.
• Design and implement quality control methods, process improvement initiatives, inspection standards, and testing procedures using Lean and/or Six Sigma methodologies.
• Define and clarify roles and responsibilities related to quality throughout the organization.
• Utilize statistical and analytical tools to identify process improvement opportunities.
• Lead and track quality improvement projects focused on cost reduction, defect reduction, and process standardization.
• Manage Corrective and Preventive Action (CAPA) processes.
• Analyze trends and lead investigations related to product complaints and internal nonconformances.
• Support customer and distributor quality-related communications and issue resolution.
• Ensure ISO 9001 certification compliance for facilities and related activities.
• Lead by example in root cause analysis and proactive problem-solving.
• Support cross-functional continuous improvement initiatives in collaboration with Operations, Engineering, Supply Chain, Finance, and other departments.
• Drive measurable improvements using Lean manufacturing principles.
• Provide training and guidance to employees on quality standards, procedures, and expectations.
• Ensure products and components—from raw materials to finished goods—meet internal and customer quality standards.
• Prepare and maintain quality documentation, including policies, procedures, manuals, work instructions, and training materials.
• Oversee the ISO 9001 program, including compliance, documentation, and audit coordination.
• Respond to facility requests related to quality standards, documentation, and regulatory clarification.
• Conduct compliance audits to assess adherence to quality standards and company policies; provide recommendations for corrective actions.
• Stay current on industry standards, regulatory updates, and quality best practices.
• Perform other duties as assigned.

Qualifications and Skills:

• Minimum of five (5) years of progressive experience in Quality Management within a manufacturing environment.
• Bachelor’s degree in Quality, Engineering, or related technical field required; Master's degree preferred. Equivalent combination of education and experience may be considered.
• ISO 9001 experience required (implementation, maintenance, and audit support).
• Experience with CAPA and structured root cause analysis methodologies.
• Lean Manufacturing and/or Six Sigma certification (Green Belt or Black Belt) preferred.
• Strong understanding of manufacturing processes and quality control methods.
• Proven ability to resolve Sales/Service and Customer quality issues.
• Proficient in ISO Quality System Standards.
• Excellent analytical, decision-making, and problem-solving skills.
• Strong interpersonal, communication, and organizational skills.
• Proficient in Microsoft Office (Word, Excel, PowerPoint) and able to navigate ERP systems and document management software.

Altix Consulting is supporting VILPE USA for the recruitment of this position.

Account Executive, Smart Building Solutions

Location: VILPE USA HQ / Mason Ohio / Greater Cincinnati region

Reports to: CEO

Type: Full-time, individual contributor (no people leadership required)

Overview:

VILPE USA is launching and scaling in the U.S. market, bringing proven Finnish building technology to commercial roofing and smart buildings. Our IoT-enabled roof monitoring solution (“Sense”) helps facilities teams reduce risk, catch issues earlier, and turn roof maintenance into a more predictable, measurable program.

We’re building a high-output sales team focused on winning real accounts fast this role is for someone who likes being in the field, opening doors, and closing business.

About VILPE USA

Innovating the Future of Roofing and Building Technology

VILPE is a family-owned Finnish technology company that has built a strong reputation across Europe as an innovation leader in roof ventilation and building moisture management. Our solutions set a high standard for energy efficiency, sustainability, and long-term building performance.

Now, VILPE is launching its U.S. operations - with an ambitious goal to grow to $30 million in revenue by 2030. We will bring VILPE’s proven European technology and digital solutions to the American commercial roofing and smart building markets.

At VILPE, we combine Finnish engineering excellence with a forward-thinking, customer-first culture. We value clarity, integrity, and initiative - and we empower people to build and shape success.

Why Join VILPE USA?

• Join a fast-scaling international company at the ground floor of its U.S. growth journey.
• Be part of a high-trust, entrepreneurial culture that values initiative and ownership.
• Work directly with cutting-edge smart building technologies that are redefining an entire industry.
• Contribute to a bold and clear mission: build a $30M U.S. business by 2030
• VILPE USA will enjoy a lot of local decision autonomy in leading the US market expansion.

Role - Account Executive, Smart Building Solutions

As an Account Executive for Smart Building Solutions, you’ll own a pipeline of target accounts and drive new customer acquisition in facilities and portfolio environments (owners/operators, FM providers, data center operators, and adjacent ecosystems). You’ll sell consultatively—often starting with a pilot and expanding into broader rollouts across sites.

Key Responsibilities:

• Prospect and build pipeline within target segments (roofing contractors, facilities management, portfolio owners/operators, data centers, commercial/industrial buildings).
• Run the full sales cycle: outreach → discovery → pilot scope → proposal → close → expansion.
• Sell outcomes, not features (risk reduction, preventive maintenance visibility, faster response, fewer surprises, better planning).
• Coordinate pilots with internal technical resources and customer stakeholders; convert pilots into repeatable multi-site rollouts.
• Build relationships with key influencers: facility directors, maintenance teams, asset managers, construction/retrofit stakeholders, and procurement.
• Work the partner ecosystem where relevant (roofing contractors, service providers, integrators, consultants) to accelerate adoption.
• Maintain strong CRM hygiene (pipeline stages, notes, next steps) and provide Monthly forecasts and updates.
• Gather field feedback to improve messaging and playbooks - early-stage company means your input matters!

Ideal Candidate Profile:

• 3–5+ years of B2B sales, business development, or account management experience
• Direct or adjacent exposure to at least one of:
• Commercial roofing
• Retail/Hospitality construction
• Life sciences/Government construction
• Facilities management
• Data center construction/operations
• Industrial/commercial construction
• Demonstrated ability to open new accounts (not just farm existing relationships).
• Strong discovery skills and comfort running customer conversations with multiple stakeholders.
• Comfortable working with tools (CRM, productivity tools)
• Willingness to travel domestically as needed (often 30–60)%, depending on territory and projects).
• Experience with building systems / workflows: CMMS, BMS/BAS, work order processes, service programs, or monitoring/IoT solutions.
• Familiarity with roofing/asset condition assessments, leak response, or building envelope discussions.
• Industry associations exposure (e.g. IIBEC).

Compensation and benefits:

• Competitive and attractive compensation package
• Fixed salary and variable compensation based on targets & achievement
• Attractive benefits (medical/dental/vision, 401k, PTO, …)
• Additional non-traditional health / wellness / mental health
• Great company & work environment – continuous learning and education
• Growth opportunities and international business environment
• Employee and customer centric culture.

Training and Onboarding:

A comprehensive training and specific on-boarding program will be available.

If your level of ambition meets ours, we want to meet you!

Role – Machine Builder / Electrical Assembler

Salary – $30-35 per hour

Type – Permanent, Full-time

Location – West Chester, OH

My client is an industrial automation and controls engineering firm specializing in custom electrical control systems and automated machinery. They support OEM and industrial customers with PLC/HMI programming, motion control, panel design, and on-site commissioning of integrated automation systems.

They are seeking a Machine Builder / Electrical Assembler to join their team, supporting the build, wiring, and integration of custom automation equipment and electrical control systems.

This position offers long-term stability, a hands-on engineering environment, and the opportunity to work on complex industrial equipment used across a range of manufacturing and automation applications.

The Machine Builder / Electrical Assembler will have the following responsibilities:

• Assemble and wire industrial machinery and control panels according to engineering drawings and schematics
• Install electrical components including sensors, motors, drives, PLC hardware, and control devices
• Perform point-to-point wiring, cable routing, and panel assembly
• Assist with machine build, integration, and mechanical assembly where required
• Support system testing, troubleshooting, and commissioning activities prior to shipment

The Machine Builder / Electrical Assembler will ideally have the following attributes:

• Experience building or assembling industrial machinery or automation equipment
• Ability to read and interpret electrical schematics and wiring diagrams
• Experience with control panels, industrial wiring, and electrical components
• Familiarity with PLC hardware such as Allen-Bradley or Siemens is beneficial
• Strong mechanical aptitude and hands-on troubleshooting ability
• Ability to work both independently and as part of a collaborative engineering team

For more information about this Machine Building role please apply, or email Jack Smillie on who will be able to provide more details on the opportunity.

Many thanks,

Premier Group

Automation Fabrication Technician

Second Shift: Monday - Thursday 4:00 pm - 2:30 am

The Automation Fabrication Technician plays a primary role in the day-to-day operation of Trew’s advanced sheet metal fabrication system. This state-of-the-art system is comprised of many elements including Laser cutters, press brakes, folder, part sorting robots, part forming robots, and automated sheet metal storage and retrieval.

The Automation Fabrication Technician is a key member of Trew’s fabrication team and has a wide range of responsibilities across all elements of the system. They possess a diverse skillset and contribute to the entire value stream including capacity planning, machine programing, machine operation, final quality, and continuous improvement.

Key Responsibilities

• Machine Operation:
• Operate all key elements of the sheet metal fabrication system.
• Identify, resolve, and prevent issues within the system.
• Software:
• Utilize specialized software packages to program and operate all major elements of the sheet metal fabrication system.
• Business Process:
• Work with Automated Fabrication Supervisor to estimate fabrication times, balance workload, and manage work in progress to meet production schedules.
• Regularly assess system performance against established benchmarks.
• Maintenance:
• Perform routine checks, replace consumables, and perform preventative maintenance to ensure uptime of the system.
• Training:
• Willingness to learn new skills and software tools via formal training programs and informal on-the-job training.

Requirements

• Must possess excellent problem solving and communication skills, strong attention to detail, and willingness to learn.
• Must be able to work independently and as part of a team.
• Must have a good understanding of electrical and mechanical systems.
• The work environment is a warehouse assembly and fabrication facility. It will involve exposure to materials-handling equipment, the need to stand for extended periods, the need to follow safety protocols, and the requirement to lift and move heavy objects.
• Must be able to travel intermittently (less than 10%) for training.

Education / Experience

• Associate's degree in an engineering or manufacturing discipline (MET, EET, Electro-Mechanical, Mechatronics, Advanced Manufacturing, or similar).
• -OR-
• Experience programming and operating metal forming machines (Laser, Punch, Press Brake, Mill, Lathe).
• Computer competence and deep knowledge of sheet metal fabrication is strongly preferred (Laser Technology Tables, Bend parameters, Automatic material loading/unloading, Lights out operation).

TREW’s story:

Business gets done working together. Successful business happens when trusted partners work together, to win together. At TREW we know that our customers buy solutions and technology built by people. With over 500 team members, we work fearlessly every day to do the right thing, even when no one is watching. From seasoned professionals to undergraduate co-ops, our team members enjoy seeing the impact of their contributions every day.

Trew is an equal opportunity employer. Applicants will be considered for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, ge

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Analyst II, QC Chemistry (Contract-to-Hire)

Location: West Chester, OH

Type: Contract-to-Hire

Department: Quality Control

Hourly Pay Rate: $32-$34

Kelly Science is seeking an Analyst II, QC Chemistry to join a quality control laboratory supporting pharmaceutical manufacturing operations. This role is responsible for performing analytical testing, maintaining laboratory equipment, supporting investigations, and ensuring compliance with cGxP and quality standards.

This is a contract-to-hire opportunity with two openings available on different shifts.

Shift Options

Night Shift

2-2-3 rotating 12-hour schedule

6:00 PM – 6:00 AM

Day Shift

Friday – Monday schedule (4×10s)

• 6:00 AM – 4:00 PM

or

• 8:00 AM – 6:00 PM

Key Responsibilities

• Perform analytical testing on samples including finished products, raw materials, stability, in-process, and water samples
• Operate, maintain, and troubleshoot laboratory equipment and instrumentation
• Support laboratory investigations and assist with resolving deviations or out-of-specification results
• Execute laboratory protocols to support validation, method development, and method transfer activities
• Review QC data to ensure accuracy and compliance with quality standards
• Assist with updates to laboratory methods and Standard Operating Procedures (SOPs)
• Identify and recommend opportunities for continuous improvement in laboratory processes
• Work collaboratively with Quality Control, Quality Assurance, and manufacturing teams
• Safely handle chemicals and hazardous materials according to established safety procedures
• Maintain compliance with cGxP requirements and regulatory standards
• Support environmental monitoring activities as needed, including data review and sample collection within manufacturing areas

Qualifications

Required

• Working knowledge of cGxP requirements and laboratory quality practices
• Strong analytical and problem-solving skills
• Basic knowledge of laboratory techniques, statistics, and quality control terminology
• Strong written, verbal, and organizational skills
• Ability to adapt quickly in a fast-paced laboratory environment

Preferred

• Bachelor’s degree in Chemistry, Biology, or related scientific field
• Prior QC laboratory experience in the pharmaceutical or biotech industry
• Experience with analytical instrumentation such as HPLC