Engineering Jobs in Midvale
56 positions found
P
HSE Technician II (Swing Shift)
✦ New
Salary not disclosed
Position Summary
Schedule is Monday thru Friday Swing Shift to start at 3:30pm
This position will serve as a member of the Health, Safety & Environmental team with emphasis on General Industry Occupational health and Safety. This position will report to the HSE Supervisor. Primary responsibilities include promoting and implementing all HSE objectives including HSE programs, policies, and procedures with primary emphasis on occupational health and safety. HSE Tech II will work to establish the desired safety culture of occupational incident/injury prevention. To perform this job successfully, the incumbent must have a passion for and demonstrated commitment for workplace injury prevention and be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. The incumbent will have general knowledge of OSHA regulations, standard safety procedures, and best safe work practices. General knowledge of behavioral-based safety programs is a plus. Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential.
Primary Duties
Under general supervision of the HSE Supervisor, the HSE Technician II will:
Perform all work in compliance with company policy and within the guidelines of bioMerieux Quality System.
Implement and monitor the facilities health & safety programs, policies, and procedures. Collect and analyze safety incident and injury statistics in a spreadsheet format and report results to safety committee and other stakeholders.
Assist with monitoring environmental practices and permitting to ensure compliance.
Perform job safety analysis (JSA’s) and recommend corrective actions.
Conduct safety training including:
new employee safety orientation
Specific occupational health and safety topic training to individuals and groups
Compile statistics and reports relevant to safety training.
Inspect and maintain safety equipment, including fire extinguishers, safety showers/eye wash, first aid kits and AED’s.
Assist with site Safety Committee activities and Building Emergency Response Teams (B.E.R.T) as needed.
Assist with maintaining the company wide, web based chemical inventory list and Safety Data Sheet
Conduct incident investigations including root cause analysis (RCA) and recommend corrective and preventive measures.
Work closely with the continuous improvement (CI) team to implement safety related CI improvements and initiatives.
Conduct safety and environmental inspections.
Perform incident and near miss investigations.
Other duties as assigned.
Supplemental Duties
May spend workday at multiple physical locations in work environments including office, warehouse, clean space manufacturing, R&D lab and bio-chemistry. Must possess a valid Utah State driver’s license.
Some local travel is required between bioMérieux buildings (all within Salt Lake City, Utah)
Training, Education and Experience
Bachelor's degree in safety, or other technical discipline (i.e engineering, industrial hygiene, science)
In lieu of a degree, 3 or more years of relevant experience may suffice.
OSHA course certifications and practical experience in general industry occupational safety in a manufacturing or multi-functional operation.
Must have experience in training preparation and presentation to individuals and groups. Must demonstrate this ability prior to job offer.
Minimum of three years’ experience performing OSHA HSE duties in a manufacturing environment
Must have experience in training preparation and presentation to individuals and groups.
Knowledge, Skills and Abilities
Oral Communication - The ability to effectively communicate with all site personnel and regulators. This includes ability to reinforce HSE concepts and policies in a manner that promotes learning and compliance.
Written Communication – The ability to write reports, training materials, standard operating procedures, and policies.
Planning/Organizing - The ability to plan, organize, prioritize, and multi-tasks.
Reasoning - The ability to collect and accurately assemble data in a logical manner. The ability to read, analyze and interpret job related information.
Dependability – Must have timely and accurate reporting, tracking and follow-up of assignments
Computer Skills – Proficient in MS Word, MS Excel, Power Point, etc.
The incumbent will have advanced knowledge and understanding of OSHA regulations, standard safety procedures, and best safe work practices.
Advanced knowledge and understanding of behavioral-based safety programs are a plus.
Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential
Working Conditions and Physical Requirements
Ability to remain in stationary position, often standing, for prolonged periods.
Ability to ascend/descend stairs, ladders, ramps, and the like.
Ability to wear PPE correctly most of the day.
Ability to adjust or move objects up to 40 pounds in all directions.
Have fine motor coordination
Ability to pass respirator fit test
Ability to gown for clean room environments
The pay for this role is between $27.50 to $36.20 an hour. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMerieux’s bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate’s experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: · A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options · Company-Provided Life and Accidental Death Insurance · Short and Long-Term Disability Insurance · Retirement Plan including a generous non-discretionary employer contribution and employer match. · Adoption Assistance · Wellness Programs · Employee Assistance Program · Commuter Benefits · Various voluntary benefit offerings · Discount programs · Parental leaves #biojobs #LI-US PandoLogic. Category: , Keywords: Environmental Services Representative
Schedule is Monday thru Friday Swing Shift to start at 3:30pm
This position will serve as a member of the Health, Safety & Environmental team with emphasis on General Industry Occupational health and Safety. This position will report to the HSE Supervisor. Primary responsibilities include promoting and implementing all HSE objectives including HSE programs, policies, and procedures with primary emphasis on occupational health and safety. HSE Tech II will work to establish the desired safety culture of occupational incident/injury prevention. To perform this job successfully, the incumbent must have a passion for and demonstrated commitment for workplace injury prevention and be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. The incumbent will have general knowledge of OSHA regulations, standard safety procedures, and best safe work practices. General knowledge of behavioral-based safety programs is a plus. Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential.
Primary Duties
Under general supervision of the HSE Supervisor, the HSE Technician II will:
Perform all work in compliance with company policy and within the guidelines of bioMerieux Quality System.
Implement and monitor the facilities health & safety programs, policies, and procedures. Collect and analyze safety incident and injury statistics in a spreadsheet format and report results to safety committee and other stakeholders.
Assist with monitoring environmental practices and permitting to ensure compliance.
Perform job safety analysis (JSA’s) and recommend corrective actions.
Conduct safety training including:
new employee safety orientation
Specific occupational health and safety topic training to individuals and groups
Compile statistics and reports relevant to safety training.
Inspect and maintain safety equipment, including fire extinguishers, safety showers/eye wash, first aid kits and AED’s.
Assist with site Safety Committee activities and Building Emergency Response Teams (B.E.R.T) as needed.
Assist with maintaining the company wide, web based chemical inventory list and Safety Data Sheet
Conduct incident investigations including root cause analysis (RCA) and recommend corrective and preventive measures.
Work closely with the continuous improvement (CI) team to implement safety related CI improvements and initiatives.
Conduct safety and environmental inspections.
Perform incident and near miss investigations.
Other duties as assigned.
Supplemental Duties
May spend workday at multiple physical locations in work environments including office, warehouse, clean space manufacturing, R&D lab and bio-chemistry. Must possess a valid Utah State driver’s license.
Some local travel is required between bioMérieux buildings (all within Salt Lake City, Utah)
Training, Education and Experience
Bachelor's degree in safety, or other technical discipline (i.e engineering, industrial hygiene, science)
In lieu of a degree, 3 or more years of relevant experience may suffice.
OSHA course certifications and practical experience in general industry occupational safety in a manufacturing or multi-functional operation.
Must have experience in training preparation and presentation to individuals and groups. Must demonstrate this ability prior to job offer.
Minimum of three years’ experience performing OSHA HSE duties in a manufacturing environment
Must have experience in training preparation and presentation to individuals and groups.
Knowledge, Skills and Abilities
Oral Communication - The ability to effectively communicate with all site personnel and regulators. This includes ability to reinforce HSE concepts and policies in a manner that promotes learning and compliance.
Written Communication – The ability to write reports, training materials, standard operating procedures, and policies.
Planning/Organizing - The ability to plan, organize, prioritize, and multi-tasks.
Reasoning - The ability to collect and accurately assemble data in a logical manner. The ability to read, analyze and interpret job related information.
Dependability – Must have timely and accurate reporting, tracking and follow-up of assignments
Computer Skills – Proficient in MS Word, MS Excel, Power Point, etc.
The incumbent will have advanced knowledge and understanding of OSHA regulations, standard safety procedures, and best safe work practices.
Advanced knowledge and understanding of behavioral-based safety programs are a plus.
Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential
Working Conditions and Physical Requirements
Ability to remain in stationary position, often standing, for prolonged periods.
Ability to ascend/descend stairs, ladders, ramps, and the like.
Ability to wear PPE correctly most of the day.
Ability to adjust or move objects up to 40 pounds in all directions.
Have fine motor coordination
Ability to pass respirator fit test
Ability to gown for clean room environments
The pay for this role is between $27.50 to $36.20 an hour. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMerieux’s bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate’s experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: · A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options · Company-Provided Life and Accidental Death Insurance · Short and Long-Term Disability Insurance · Retirement Plan including a generous non-discretionary employer contribution and employer match. · Adoption Assistance · Wellness Programs · Employee Assistance Program · Commuter Benefits · Various voluntary benefit offerings · Discount programs · Parental leaves #biojobs #LI-US PandoLogic. Category: , Keywords: Environmental Services Representative
Not Specified
S
Office Manager
✦ New
Salary not disclosed
Position Summary
The Office Manager ensures seamless daily operations of the workplace environment, overseeing reception, facilities coordination, vendor management, travel, and executive-level operational support. This role serves as a trusted operational partner to the Sr. Director of Executive Operations and leadership team, ensuring a professional, organized, and efficient office experience. The Office Manager collaborates cross-functionally with all departments, and department leaders to drive operational excellence across workplace services and corporate support functions.
Key Responsibilities
Front Desk & Visitor Management
- Answer and direct incoming phone calls
- Greet visitors and manage front desk reception area
- Issue and track visitor and employee temporary badges
- Address customer service inquiries and coordinate resolution with appropriate departments
Mail & Shipping Operations
- Sort and distribute all incoming mail and packages
- Process outgoing mail and shipments
- Maintain mailroom organization as well as USPS and UPS supply inventory
Conference Room & Meeting Support
- Manage conference room scheduling and readiness
- Ensure conference rooms are clean, organized, and properly configured
- Partner with IT to resolve conference room and ELT technology issues
- Coordinate meeting support for ELT and leadership sessions as needed
Office Operations & Facilities Coordination
- Maintain office, lobby, breakroom, and common areas
- Order and manage office, breakroom, and janitorial supplies
- Coordinate cleaning services and address vendor issues (e.g., Jani-King)
- Work with facilities team to resolve office and building concerns
- Maintain office seating and organizational charts
- Create and update cubicle and office name tags
Vendor & Equipment Management
- Serve as primary liaison for office vendors and contractors
- Manage and maintain office equipment; partner with IT as needed
- Track service requests and ensure timely follow-through and resolution
Administrative Support & Special Functions
- Coordinate Outfitter travel logistics as assigned
Qualifications
- 3+ years of experience in office administration, reception, or office management
- Travel coordination experience with platforms, such as Navan or Concur
- Strong organizational and multitasking skills
- Professional communication skills (verbal and written)
- Experience coordinating vendors and service providers preferred
- Proficiency in Microsoft Office or comparable systems
- Ability to manage multiple priorities in a fast-paced environment
Core Competencies
- Service-oriented mindset
- Strong attention to detail
- Problem-solving and follow-through
- Professional discretion and confidentiality
- Ability to collaborate cross-functionally (IT, Facilities, Leadership, Departments)
Executive & Corporate Operations Support
- Manage corporate travel agreements and vendor relationships (Navan, Engine, National/Enterprise, Airline Partners)
- Schedule and coordinate Store Support Center and Leadership meetings
- Partner with Real Estate to coordinate document execution by CFO; manage overnight shipments as needed and ensure fully executed documents are received and properly filed in designated real estate folders
- Distribute monthly employee birthday and anniversary lists to Department Managers
Sportsman's Warehouse is an Equal Opportunity Employer
Not Specified
S
Senior Project Manager
✦ New 🏢 Stratus
Salary not disclosed
Ideal Candidate will have previous experience in the Signage Industry
There’s never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs.
From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus’ success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action.
Job Summary
The Project Manager supports the Account Manager by developing and implementing comprehensive project plans for sign design, manufacturing, and installation, while meeting budget and gross margin targets. This role collaborates closely with internal departments—such as Art, Engineering, Manufacturing, and Production Control—to ensure projects are executed accurately, efficiently, and on schedule. Additionally, the Project Manager selects and manages subcontractors, negotiates pricing, oversees installation quality, and prepares final billing packages for approval.
Duties and Responsibilities
- Lead complex, large‑scale, multi‑site exterior signage programs valued at $3M–$10M+ annually, often involving accelerated timelines or heightened client visibility.
- Serve as the primary customer-facing lead, ensuring clarity of expectations, proactive communication, and alignment of project outcomes with strategic objectives.
- Translate customer goals into actionable project plans, ensuring cross‑functional teams (design, permitting, manufacturing, installation, logistics) operate in coordination.
- Develop and manage comprehensive project schedules, scopes, budgets, and risk mitigation plans with minimal oversight.
- Anticipate operational challenges and implement solutions that drive efficiency, reduce cost, and maintain high quality standards.
- Ensure adherence to technical specifications, permitting requirements, safety standards, and installation best practices common to exterior signage projects.
- Influence internal and external partners—including operations, procurement, field services, and third‑party vendors—to maintain momentum and resolve obstacles.
- Provide high‑level updates and strategic insights to the VP of Exterior Signage and customer leadership, ensuring transparency on risks, opportunities, and milestones.
- Facilitate executive business reviews and customer-facing presentations as the program lead.
- Monitor project financial performance, ensuring profitability through scope control, cost management, and accurate forecasting.
- Identify risks early and implement mitigation plans that protect schedule, budget, and customer satisfaction.
- Maintain strict quality control throughout all project phases including design approval, production, shipment, and installation.
- Build long-term, trusted relationships with key customer stakeholders, positioning the organization as a strategic partner.
- Manage escalations calmly and professionally, resolving issues in a manner that reinforces confidence in the team’s capabilities.
- Ensure customer acceptance of deliverables and oversee a smooth transition into ongoing maintenance or closeout.
- Lead project post‑mortems and produce insights to prevent future failures and improve delivery efficiencies.
- Mentor junior project managers by providing guidance, best practices, and support without formal direct reports.
- Contribute to departmental process standardization and continuous improvement initiatives.
- Perform other responsibilities as assigned by the Vice President, Exterior Signage.
Qualifications
- Bachelor’s degree in Business, Project Management, Construction Management, or related field (or equivalent experience).
- PMP (Project Management Professional) strongly preferred; CAPM acceptable with significant senior-level experience.
- Demonstrated experience leading multiple complex projects simultaneously.
- Industry knowledge of exterior signage manufacturing, permitting, and installation processes preferred.
- 7+ years project management experience, preferably in exterior signage, construction, or multi-site deployments.
- Proven track record managing large-scale or national programs with complex execution requirements.
- Exceptional communication skills, with the ability to present confidently to customer executives and internal senior leadership.
- Strong understanding of formal project management frameworks with the ability to adapt them to real‑world environments.
- Ability to make strategic decisions with incomplete information in fast‑moving environments.
Why Work With Us
- Supportive & Friendly Culture
- Manage national accounts for Fortune 500 companies
- Medical, Dental, Vision coverage options
- Flexible Spending & Health Savings Accounts
- Company paid Life Insurance
- 401k with Employer Contribution
- Company paid Short/Long Term Disability
- Generous Paid Time Off program + Holidays
- Career Growth Opportunities and Career Mapping
- Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors
eeo/mfdv
Not Specified
N
Production Tech 2nd Shift (4pm-2:30am)
✦ New
Salary not disclosed
Nammo Composition Solutions, is an engineering and composite manufacturing company with more than 20 years of operations in Salt Lake City, Utah.
Job Summary:
Production Technicians are responsible for assembling and testing manufactured goods. They ensure products are working exactly as intended, and are free of defects or others issues. Production Technicians usually work as part of a larger team, frequently interacting with manufacturing and Quality Assurance personnel. 2nd Shift, working 4/10, Monday-Thursday 4pm-2:30am
Primary Responsibilities:
Performs a variety of repetitive operations for the production of composite parts
Operations can include cleaning of molds, operating winding machines, and working with chemicals
Clean molds; use a variety of power tools; cut, clean, and package parts
Places parts in specified relationship to each other
Operates and tends automatic and manual processing equipment
Uses a variety of hand and power tools, jigs and fixtures
Works at different work stations as production needs require
Performs general daily housekeeping and cleaning of equipment and area to ensure safe working conditions.
Ability to read procedures
Be able to write legible for filling out documentation
Other duties as assigned
Requirements (Education/Skills/Experience):
1 or more years of related experience
High School Diploma or general education diploma (GED)
Knowledge of basic measuring equipment, tape measure and calipers
Ability to lift up to 50lbs
Capacity to read and interpret procedures accurately
Be able to write legible and accurately for filling out documentation
Ability to be at work on time on a regular consistent basis.
Skills & Requirements Qualifications
Job Summary:
Production Technicians are responsible for assembling and testing manufactured goods. They ensure products are working exactly as intended, and are free of defects or others issues. Production Technicians usually work as part of a larger team, frequently interacting with manufacturing and Quality Assurance personnel. 2nd Shift, working 4/10, Monday-Thursday 4pm-2:30am
Primary Responsibilities:
Performs a variety of repetitive operations for the production of composite parts
Operations can include cleaning of molds, operating winding machines, and working with chemicals
Clean molds; use a variety of power tools; cut, clean, and package parts
Places parts in specified relationship to each other
Operates and tends automatic and manual processing equipment
Uses a variety of hand and power tools, jigs and fixtures
Works at different work stations as production needs require
Performs general daily housekeeping and cleaning of equipment and area to ensure safe working conditions.
Ability to read procedures
Be able to write legible for filling out documentation
Other duties as assigned
Requirements (Education/Skills/Experience):
1 or more years of related experience
High School Diploma or general education diploma (GED)
Knowledge of basic measuring equipment, tape measure and calipers
Ability to lift up to 50lbs
Capacity to read and interpret procedures accurately
Be able to write legible and accurately for filling out documentation
Ability to be at work on time on a regular consistent basis.
Skills & Requirements Qualifications
Not Specified
P
Senior Mechanical Design Engineer-HVAC
✦ New
Salary not disclosed
Position Overview:
PTS Advance is seeking an experienced MEP Mechanical Design Engineer to join our growing team. The ideal candidate will have a strong background in mechanical building systems design and proven expertise in Revit for modeling and documentation. You'll play a key role in developing HVAC, plumbing, and piping designs for commercial, industrial, and institutional projects.
Key Responsibilities:
- Design and develop mechanical systems for building projects, including HVAC, plumbing, and piping.
- Create and coordinate 3D models and detailed construction documents using Revit.
- Collaborate with multidisciplinary teams, including architects, electrical engineers, and contractors.
- Perform load calculations, equipment selection, and system layouts.
- Ensure designs meet applicable codes, standards, and client specifications.
- Support project lifecycle from concept through construction administration.
Qualifications:
- Bachelor's degree in Mechanical Engineering or related field.
- 10+ years of experience in MEP mechanical design (commercial or industrial preferred).
- Proficiency in Revit required.
- Strong understanding of mechanical building codes and standards.
- Excellent communication and teamwork skills.
- Professional Engineer (PE) license is a plus.
Not Specified
J
Configuration Management Specialist / Drawing Analyst
✦ New 🏢 JT4 LLC
Salary not disclosed
Company Profile JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties A Configuration Drawing Analyst / CM Specialist performs work that is varied and complex in nature in one or more specialty area of CM or engineering data.
Employee will be responsible for the following functions/duties: Participate in design reviews, physical configuration audits, and related drawing / drafting activities Apply processes / guidelines and follow established standards Ensure configuration baselines are maintained and configuration documents are updated as required Facilitate Configuration Control Board (CCB) meetings Analyze engineering change proposals to ensure configuration documents are properly identified and updated Convert AutoCad drawings to pdf and maintain the files in the company electronic data repository Ensure technical completeness of drawings (clarity, adherence to standards, dimensional accuracy, correct specifications, etc.) Ensure as-built redline drawings are completed after installation Work with departments / individuals to resolve drawing discrepancies Conduct final review and sign-off on technical engineering drawings prior to submittal to the customer May provide work direction to subordinate work unit personnel Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience A bachelor's degree in business administration, or related field, or a combination of formal training and six years of directly related CM experience are required for this position.
In addition, a Configuration Drawing Analyst / Configuration Management Specialist must possess the following qualifications: Proficient in computer operations, word processing, and integrated software applications, including electronic data management systems (EDMS) Drafting experience using AutoCAD desired Knowledge of cable lists, parts lists & interconnects needed Effective verbal and written communication skills Good planning/organizational skills.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is sedentary in an office environment and active out in the field as applicable.
Walking, stooping, bending, climbing stairs, stretching, and lifting (up to 50 pounds) is required.
Frequent use of a computer is required.
Travel to remote company work locations will be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JCDM10; A3UTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties A Configuration Drawing Analyst / CM Specialist performs work that is varied and complex in nature in one or more specialty area of CM or engineering data.
Employee will be responsible for the following functions/duties: Participate in design reviews, physical configuration audits, and related drawing / drafting activities Apply processes / guidelines and follow established standards Ensure configuration baselines are maintained and configuration documents are updated as required Facilitate Configuration Control Board (CCB) meetings Analyze engineering change proposals to ensure configuration documents are properly identified and updated Convert AutoCad drawings to pdf and maintain the files in the company electronic data repository Ensure technical completeness of drawings (clarity, adherence to standards, dimensional accuracy, correct specifications, etc.) Ensure as-built redline drawings are completed after installation Work with departments / individuals to resolve drawing discrepancies Conduct final review and sign-off on technical engineering drawings prior to submittal to the customer May provide work direction to subordinate work unit personnel Perform other job-related duties, as required.
Requirements -- Education, Technical, and Work Experience A bachelor's degree in business administration, or related field, or a combination of formal training and six years of directly related CM experience are required for this position.
In addition, a Configuration Drawing Analyst / Configuration Management Specialist must possess the following qualifications: Proficient in computer operations, word processing, and integrated software applications, including electronic data management systems (EDMS) Drafting experience using AutoCAD desired Knowledge of cable lists, parts lists & interconnects needed Effective verbal and written communication skills Good planning/organizational skills.
Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is sedentary in an office environment and active out in the field as applicable.
Walking, stooping, bending, climbing stairs, stretching, and lifting (up to 50 pounds) is required.
Frequent use of a computer is required.
Travel to remote company work locations will be required.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JCDM10; A3UTTR
Not Specified
J
Joint Data Network & Information Technology Field Engineer
✦ New 🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES A Joint Data Network & Information Technology Field Engineer performs or leads complex field engineering assignments and perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic / mechanical equipment and information technology (IT) systems and infrastructures.
Employee will be responsible for the following functions/duties: Apply knowledge of design specifications for more complex systems/projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Recommend technology refresh upgrades for end-of-life systems as a technical subject matter expert Define / write function and security requirements for service delivery of command, control, computer, communication and IT systems, which could include virtual environments and associated applications Manage, design and implement command-and-control, debriefing and other associated information system infrastructure and applications Provide operation, troubleshooting and debugging support for computer operations systems, including system security, access, configuration, backups and restores Assist in incident handling in conjunction with the Facility Security Officer and Information Security Officer / Information Systems Security Manager Assures common engineering principles are consistently applied to internal software, hardware and multimedia inventories Researches engineering solutions to address software and hardware requirements in support of system sustainment and new system projects that handle computing, networking, video, audio and data while taking into consideration emissions and communications requirements Assists in system administration, troubleshooting and remediation of command-and-control, debriefing and other IT systems operation performance issues Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface and liaison with customers at all levels from quotation to final design and test activities, design reviews, and technical working group meetings to comply with requirements and specifications Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendations Perform other job-related duties, as required DESIRED QUALIFICATIONS Ability to work with a group or independently High energy, multi-disciplined and professional Experience in a variety of disciplines across electronics, computers, networks, radio frequency, datalink, video, mechanical and associated technological fields REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 12 years of experience in the specialty field are required for this position.
In addition, a Joint Data & Information Technology Field Engineer must possess the following qualifications: Broad knowledge of concepts, principles, and practices of engineering that enable performance as a senior technical contributor on complex projects or programs Knowledge and skill sufficient to apply developments in engineering to solve problems in the specialty area Working knowledge of computer systems and integrated software application programs Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA’s Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is typically performed an office environment with no unusual hazards.
Occasional lifting (up to 750 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations will be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES A Joint Data Network & Information Technology Field Engineer performs or leads complex field engineering assignments and perform a variety of engineering assignments involving technology applications involved in the installation, operation, testing, and maintenance of complex electronic / mechanical equipment and information technology (IT) systems and infrastructures.
Employee will be responsible for the following functions/duties: Apply knowledge of design specifications for more complex systems/projects Coordinate and work closely with other engineering, logistics, financial, and program management disciplines to define system specifications and requirements Recommend technology refresh upgrades for end-of-life systems as a technical subject matter expert Define / write function and security requirements for service delivery of command, control, computer, communication and IT systems, which could include virtual environments and associated applications Manage, design and implement command-and-control, debriefing and other associated information system infrastructure and applications Provide operation, troubleshooting and debugging support for computer operations systems, including system security, access, configuration, backups and restores Assist in incident handling in conjunction with the Facility Security Officer and Information Security Officer / Information Systems Security Manager Assures common engineering principles are consistently applied to internal software, hardware and multimedia inventories Researches engineering solutions to address software and hardware requirements in support of system sustainment and new system projects that handle computing, networking, video, audio and data while taking into consideration emissions and communications requirements Assists in system administration, troubleshooting and remediation of command-and-control, debriefing and other IT systems operation performance issues Verify and comply with engineering documentation standards and test procedures Prepare, deliver, and submit technical papers and perform engineering studies Support development of technical proposals and provide comments on technical content and level of effort of the proposed scope of work Develop, maintain, and produce technical documentation and system/subsystem specifications Direct interface and liaison with customers at all levels from quotation to final design and test activities, design reviews, and technical working group meetings to comply with requirements and specifications Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alternatives, and provide recommendations Perform other job-related duties, as required DESIRED QUALIFICATIONS Ability to work with a group or independently High energy, multi-disciplined and professional Experience in a variety of disciplines across electronics, computers, networks, radio frequency, datalink, video, mechanical and associated technological fields REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 12 years of experience in the specialty field are required for this position.
In addition, a Joint Data & Information Technology Field Engineer must possess the following qualifications: Broad knowledge of concepts, principles, and practices of engineering that enable performance as a senior technical contributor on complex projects or programs Knowledge and skill sufficient to apply developments in engineering to solve problems in the specialty area Working knowledge of computer systems and integrated software application programs Ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software Excellent communication and analytical skills Planning/organizational skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA’s Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Work is typically performed an office environment with no unusual hazards.
Occasional lifting (up to 750 pounds), constant sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required.
Travel to remote company work locations will be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Not Specified
J
Drafter
✦ New 🏢 JT4 LLC
Salary not disclosed
Company Profile JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Under minimum direction of a supervisor or engineering personnel and with considerable latitude for independent and innovative actions within a technical area, a Drafter designs and/or creates layouts of complex major and minor systems, assemblies, and components, using various software programs, or freehand drawings.
Employee will be responsible for the following functions/duties: Prepare multiple-view mechanical detail and assembly drawings often of a complex nature from layout drawings, sketches, existing or prototype parts, and or verbal instructions Perform other routine drafting activities such as revising or redrawing existing drawings, making blocks, cells, etc.
Use a variety of precision measuring tools to verify or obtain data for drawing development Provide complete printed circuit board drawing packages to include assemblies, detail drawings, smart schematics, Gerber files, etc.
Research scientific and technical materials, standards, and specifications for information and selection of components Ensure all work conforms to DoD MIL-STD-100 and company drafting standards Provide information and direction to lower-level drafters as necessary Perform other job-related duties, as required Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
Travel to remote company work locations will be required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from an accredited two- to four-year technical institute, or equivalent, and a minimum of 10 years of experience in a related field are required for this position.
In addition, a Drafter must possess the following qualifications: Competence in the use of a variety of CAD software programs such as MicroStation, AutoCAD, Schematic Capture, and PCB Auto-router tool, as appropriate Effective verbal and written communication skills Planning/organizational skills Ability to work under deadlines.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses / certification, and the inability to obtain and maintain the required clearance, license, or certification may affect and employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
Job Summary -- Essential Functions/Duties Under minimum direction of a supervisor or engineering personnel and with considerable latitude for independent and innovative actions within a technical area, a Drafter designs and/or creates layouts of complex major and minor systems, assemblies, and components, using various software programs, or freehand drawings.
Employee will be responsible for the following functions/duties: Prepare multiple-view mechanical detail and assembly drawings often of a complex nature from layout drawings, sketches, existing or prototype parts, and or verbal instructions Perform other routine drafting activities such as revising or redrawing existing drawings, making blocks, cells, etc.
Use a variety of precision measuring tools to verify or obtain data for drawing development Provide complete printed circuit board drawing packages to include assemblies, detail drawings, smart schematics, Gerber files, etc.
Research scientific and technical materials, standards, and specifications for information and selection of components Ensure all work conforms to DoD MIL-STD-100 and company drafting standards Provide information and direction to lower-level drafters as necessary Perform other job-related duties, as required Other Responsibilities Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
Working Conditions Work is performed in a typical office environment with no unusual hazards.
Occasional lifting (up to 20 pounds), constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication, and constant mental alertness are required.
The foregoing conditions and physical requirements represent the general characteristics required to perform the essential functions for this job.
In general, all positions may require standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, bending, twisting, kneeling, crouching and crawling.
Specific work assignments may include additional environmental conditions or physical requirements necessary to perform the essential functions of the job.
Travel to remote company work locations will be required.
Requirements -- Education, Technical, and Work Experience A graduate certificate from an accredited two- to four-year technical institute, or equivalent, and a minimum of 10 years of experience in a related field are required for this position.
In addition, a Drafter must possess the following qualifications: Competence in the use of a variety of CAD software programs such as MicroStation, AutoCAD, Schematic Capture, and PCB Auto-router tool, as appropriate Effective verbal and written communication skills Planning/organizational skills Ability to work under deadlines.
Disclaimer The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses / certification, and the inability to obtain and maintain the required clearance, license, or certification may affect and employee's ability to maintain employment.
SCC: JOTDA18; A3UTTR
Not Specified
S
Marketing Specialist
✦ New 🏢 Sportsman's Warehouse
Salary not disclosed
Position Overview
Sportsman’s Warehouse is seeking a highly organized, self-directed Marketing Specialist to support our Integrated Marketing team. This role partners closely with the Marketing Director and Manager, Trade Marketing to bring omnichannel campaigns and promotions to life across stores, e-commerce, digital, and vendor-funded programs.
This is not an entry-level role. We are looking for a marketing professional with 3–4+ years of experience who can independently manage projects, move quickly, and ensure flawless execution in a fast-paced retail environment.
You’ll play a critical role in turning strategy into action — coordinating timelines, assets, partners, and details so campaigns launch accurately and on time across every channel.
This is an onsite role based in West Jordan, Utah, with flexibility to work either a traditional full-time schedule or a condensed 4-day workweek. This role is a temp to perm opportunity.
Key Responsibilities
Campaign & Promotion Execution
- Support planning and execution of integrated marketing campaigns across retail, digital, email, paid media, social, and in-store channels
- Manage timelines, briefs, and assets to ensure accurate, on-time launches
- Translate marketing direction into clear, actionable project plans
Trade & Vendor Marketing Support
- Coordinate vendor-funded and co-op marketing programs, including asset collection, placement support, and budget tracking
- Assist with trade promotions, seasonal campaigns, and brand partnerships
- Maintain vendor calendars and documentation
Omnichannel Coordination
- Ensure consistent messaging and offers across store, e-commerce, and digital touchpoints
- Partner with merchandising, e-commerce, and store teams to align priorities and promotions
- Support store events, activations, and key selling periods
Workflow & Operations
- Own project trackers, marketing calendars, and internal communications
- Route creative briefs and assets through the creative/production process
- Proactively identify risks and solve problems before they impact launches
- Manage multiple workstreams simultaneously with minimal oversight
Qualifications
Required
- 3–4+ years of experience in retail, integrated, or trade marketing
- Proven ability to manage multiple projects in a fast-paced, deadline-driven environment
- Strong organizational skills and exceptional attention to detail
- Self-starter who takes initiative and follows through
- Clear communicator and effective cross-functional partner
- Proficiency with Microsoft Office/Google Workspace and project management tools
Preferred
- Retail or omnichannel marketing experience
- Exposure to vendor/co-op or trade marketing
- Experience working with creative teams or agencies
- Experience supporting promotions, seasonal campaigns, or store marketing
Success Profile
You will thrive in this role if you:
- Move quickly and stay organized under pressure
- Anticipate needs and take ownership without waiting for direction
- Enjoy being the person who keeps projects moving
- Balance details with deadlines
- Take pride in executional excellence
Why Join Sportsman’s Warehouse
This role offers broad exposure across the full marketing ecosystem — from stores to digital to vendor partnerships — and is ideal for someone looking to grow their career within an integrated retail marketing team through a combination of exposure and practical experience. You’ll have meaningful ownership, a collaborative environment, and flexibility in your work schedule while helping drive the marketing engine of a national outdoor retailer.
Sportsman's Warehouse is an Equal Opportunity Employer
Not Specified
S
Senior Manager Loyalty & CRM
✦ New 🏢 Sportsman's Warehouse
Salary not disclosed
Role Purpose
The Senior Manager, Loyalty & CRM is responsible for executing and scaling the company’s owned retention programming, including loyalty and lifecycle CRM, to improve customer retention, frequency, and lifetime value.
This role plays a critical execution and learning role in Loyalty Chapter 2, supporting the design, testing, launch, and optimization of a new loyalty value proposition, while operating CRM as the primary activation and experimentation engine.
The role sits within Omni-Customer Intelligence, Analytics & Loyalty and partners closely with Performance Marketing, Digital Commerce Operations, and IT.
Scope & Mandate
- Execute loyalty and CRM programming as always-on retention engines
- Support Loyalty Chapter 2 value proposition launch and scaling
- Operate lifecycle CRM programs that drive repeat behavior
- Enable test-and-learn loops that inform customer intelligence and growth decisions
- Ensure loyalty and CRM activation align with enterprise economic guardrails
Key Responsibilities
Loyalty Redesign and Programming Execution
- Execute the day-to-day operation of the loyalty program
- Support new loyalty value proposition testing, launch readiness, and rollout
- Manage loyalty benefits, offers, and engagement mechanics
- Monitor loyalty performance and surface insights to the Senior Director
- Ensure loyalty activation aligns with defined economics and retention goals
CRM & Lifecycle Activation
- Own CRM lifecycle execution across email, app, and other owned channels
- Build and manage lifecycle journeys (onboarding, repeat, reactivation)
- Partner with Performance Marketing and Commerce to integrate CRM touchpoints
- Ensure CRM is used as an activation and learning layer, not just a messaging channel
Testing, Learning & Optimization
- Execute test plans defined by the Customer Intelligence team
- Partner with Analytics to evaluate performance and customer response
- Translate learnings into program refinements and recommendations
- Maintain discipline around test design, controls, and measurement
Cross-Functional Coordination
- Partner with:
- Performance Marketing on targeting and lifecycle alignment
- Digital Commerce Operations on loyalty and CRM integration on-site
- IT on activation enablement and platform coordination
- Ensure operational readiness for launches, promotions, and peak periods
Vendor & Platform Coordination
- Manage day-to-day execution with CRM and loyalty vendors
- Coordinate campaign builds, deployments, and QA
- Ensure vendors execute against defined priorities and standards
- Escalate issues and opportunities with clarity and solutions
Explicit Role Boundaries (Important)
This role does:
- Execute loyalty and CRM programming
- Operate lifecycle journeys and owned channel activation
- Support loyalty testing, launch, and optimization
- Drive retention-focused execution and learning
This role does not:
- Own loyalty strategy or economics
- Own customer segmentation or modeling
- Own media investment or acquisition strategy
- Own e-commerce optimization or merchandising
- Own martech platform architecture or engineering
Success Metrics
Primary KPIs
- Customer retention and repeat rate (program-level contribution)
- Loyalty engagement and member participation
- CRM lifecycle performance (conversion, frequency lift)
- Quality and velocity of testing and learning
Secondary KPIs
- Campaign execution quality and timeliness
- Cross-channel integration effectiveness
- Operational readiness and reliability
Ideal Background
- 6–9+ years in CRM, loyalty, lifecycle marketing, or retention roles
- Experience executing loyalty or retention programs in retail or omni-channel environments
- Strong operational and program management skills
- Comfortable working in evolving, low-maturity environments
Leadership & Working Style
- Strong executor with learning mindset
- Detail-oriented but commercially aware
- Comfortable operating within guardrails
- Collaborative, pragmatic, and accountable
- Energized by building something that scales
Reporting Relationship
Reports to: Senior Director, Omni-Customer Intelligence, Analytics & Loyalty
Sportsman's Warehouse is an Equal Opportunity Employer
Not Specified
jobs by
✓ All jobs loaded