Engineering Jobs in Middletown Connecticut

The Manufacturing Engineer is responsible for optimizing the process capability of the assigned product group by developing and verifying processes, analyzing process flows, implementing performance improvements, and conducting long-term process monitoring. This role ensures that production operations meet safety, quality, cost, and delivery objectives through process improvements, technical support, and continuous improvement initiatives. The engineer acts as the technical liaison between design, production, quality, and maintenance teams to sustain and enhance product line performance.

Key Responsibilities:

Safety & Compliance:

• Ensure compliance with safety, environmental, and regulatory standards in all process designs and implementations.

Quality:

• Collaborate with Quality Assurance and implement best practices for process control.

Daily Operations:

• Ensure stable and efficient production processes to support execution of production plan.
• Train operators and supervisors on new processes, equipment, and quality standards.
• Provide technical guidance during equipment installation, qualification, and maintenance troubleshooting.

Process Standards:

• Update and maintain production standards in ERP (Standard Rates/Crewfactor)
• Develop, document, and maintain manufacturing process instructions, standard work, and operating procedures.

Process Improvement:

• Collaborate with Quality and Production teams to reduce setup times, improve cycle times and reduce scrap.
• Analyze production data to identify trends, inefficiencies, and opportunities for cost reduction and process improvement.
• Design and validate tooling, fixtures, and process layouts to ensure ergonomic and efficient operations.
• Monitor and improve key performance indicators (KPIs) such as throughput, downtime, and quality metrics.
• Participate in cross-functional continuous improvement activities, including Lean, 5S, and Six Sigma initiatives.

Problem Solving:

• Actively participate in root cause analysis and corrective and preventive actions (CAPA) for process-related issues, internal rejections, and customer complaints.

Communication:

• Foster open, cross-functional communication across all levels and departments to address opportunities and challenges within the product line.
• Support new product introductions (NPI) and engineering change implementations within the product line.

Key Metrics: (Product Line Performance Card)

Safety and Compliance

• Recordable Incident Rate: OSHA-reportable safety incidents per period.
• Near Miss Reporting: Frequency of safety risks reported before they become incidents.

Quality

• Customer complaints and/or returns: Frequency and type of product issues reported post-shipment.
• Scrap Rate: Pieces Scrapped / Pieces Produced
• Internal Rejections/Defect Rate: Issues found during process control checks.

Production Performance

• On-Time Delivery (OTD)
• Production Efficiency: Actual output vs. planned output.
• GMP (Good Manufacturing Practices)

Cost Control

• Product Line GPM Targets (Gross Profit Margin)
• Material Usage Variance: Difference between actual and expected material usage.

Continuous Improvement

• Kaizen Participation: Employee involvement in improvement activities.
• Downtime Analysis: Root cause tracking and reduction of unscheduled downtime.
• 5S or Visual Management Audits: Scores from housekeeping and organization assessments.
• Willingness to stay current with emerging technologies is Vital.

Qualifications:

• Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Experience: 3–7 years of experience in a manufacturing environment; experience supporting a dedicated product line is preferred.
• Capable of meeting and exceeding timelines.
• Strong knowledge of manufacturing processes, equipment, and production systems.
• Experience with Lean manufacturing, Six Sigma, and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram, FMEA).
• Proficiency with CAD software (SolidWorks, AutoCAD) ERP systems.
• Understanding of GD&T, process capability (Cp, Cpk), and statistical process Control (SPC).
• Strong analytical and problem-solving abilities.
• Excellent communication and collaboration skills.
• Ability to manage multiple projects and priorities in a fast-paced environment.
• Capable of working with minimal or no supervision.
• A can-do attitude.

Join America’s leading window & door company as a Sales Consultant!

Are you a motivated, customer focused professional who thrives in a dynamic, growth driven environment? Do you love the idea of helping homeowners transform their spaces while building a rewarding career? If so, we want to meet you!

As a Sales Consultant for Esler Companies – Renewal by Andersen, you’ll be the face of our brand, meeting homeowners, showcasing our premium window and door solutions, and guiding them through an exciting home improvement journey. You’ll work directly with customers in their homes, performing professional inspections, and delivering engaging product demonstrations.

This is a fully commission-based role earning $150,000+ yearly. You will be provided with paid training including a ramp up, pre-set and pre-qualified leads, a flexible schedule, and excellent company culture. Our Top Performers earn an all-expenses-paid company trip yearly!

Responsibilities

• Deliver in‑home product demonstrations that delight prospective customers.
• Help homeowners find the right fit for their needs.
• Manage your sold projects from initial agreement through final installation and quality assurance.
• Partner with our Installation Managers to remotely measure windows using video technology.
• Build your own referral network and cultivate repeat business.
• Provide professional, respectful on‑site experiences for every customer, every time.

Qualifications

• At least 2 years of sales experience.
• Passionate about exceeding customer expectations.
• Self-motivated, results driven, and ready to win.
• A confident communicator with excellent presentation and negotiation skills.
• Tech savvy and comfortable using modern tools to support your workflow.
• Adaptable, coachable, and energized by working in a fast-paced environment.
• A valid U.S. driver’s license.
• Flexibility to meet customers during evenings and weekends.

Benefits

• Paid Training with Ramp Up
• Medical, Dental, and Vision Insurance
• Teammate Assistance Plan
• Tuition Reimbursement
• 401k with 50% match up
• Paid Volunteer Time
• And more!

Pre-Employment Requirements

Esler Companies requires applicants to successfully complete the following as part of the hiring process:

•Background Check

•Drug Screen

Empowered to be Extraordinary. We believe in our people. And that's why we empower you to develop a career path that supports your unique voice and talents.

THE ESLER COMPANIES - RENEWAL BY ANDERSEN STORY

Renewal by Andersen is the full-service window-replacement division of 120+ year-old Andersen Corporation, the owner of the most trusted family of window brands in America. RbA was founded to redefine the industry and offer a different—and better—window-replacement experience. Esler Companies is the holding company for Renewal by Andersen of Nevada, Arizona, Colorado, Oklahoma, North Texas, Central Texas, Greater Philadelphia, Southern New England and Portland, Maine, with sales and marketing engines in Northborough, Massachusetts & Austin, Texas.

We are a proud equal-opportunity employer. We are committed to fair hiring practices and to creating a welcoming environment for all team members. Esler Companies LLC is committed to maintaining a safe, healthy, and drug-free workplace for all teammates.

Please note that we participate in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Esler Companies will often use SMS to communicate with candidates. Candidates can choose to opt-out at any time.

#ZR

Posted Salary Range

USD $150,000.00 - USD $350,000.00 /Yr.

Position:

The Engineering Project Manager will report directly to the PMO Manager and will be responsible for leading and managing assigned NPI Projects from project initiation through production hand-off.

Key Goals:

The EPM goal when managing projects is to meet or exceed internal and external customer expectations while maintaining the scope, quality and any costs associated with the project. The Engineering Project Manager will oversee and manage the activities of multiple projects involving contracted component/assembly processes, equipment/tooling builds, and plant layout tasks that support all three AVNA facilities.

Responsibilities:

• The EPM will facilitate communication between the customer and the internal project team. The EPM will guide contractual conversations, technical conversations, and production conversations.
• The EPM manages activities for cross-functional team members that include Manufacturing Engineers, Quality Engineers, Automation Engineers, Toolmakers/technicians, Maintenance, product supervisors, estimating/quoting/sales, Buyers/Planners, outside vendors, etc.
• Develops and maintains multi-phase project plans and timelines while adhering to scope, quality and project costs. Any milestone dates, risks, or failures must be clearly communicated to the customer in a timely manner.
• Identifies project risks and addresses accordingly during all stages of the project. The EPM must understand the use of technical and financial information from past projects and the experience of subject matter experts.
• The EPM will collaborate with a multi-functional team to resolve technical challenges. The EPM will assist with troubleshooting, data analysis and in-depth evaluation of the process, equipment or tooling when needed.
• Oversees all project operation rate variants as it relates to gross profit margins. The EPM alters/improves processes with the technical lead during the NPI stage as it relates to cost, efficiency or quality.
• Works with outside suppliers to develop or confirm material, component or assembly processes.
• Works with outside vendors for gages, tooling, equipment or services that are required within the project plan or capital expense.
• Technical writing will be owned by the EPM such as IQ/OQ/PQ protocols and reports. The EPM must ensure other technical documents are correctly completed during the specified project phase per any phase gates.
• Convey meeting minutes with specific actions/timing for all internal and external meetings that are led by the EPM.

Requirements:

• 5+ years of project management experience as an engineer or project manager, preferably in the medical device industry.
• Hands-on technical support in the Berlin, CT facility and New Britain, CT facility is required.
• Formal project management training (PMP certified) is preferred.
• Skilled in a project management software product (Smartsheet preferred)
• Engineering skills or technical skills surrounding manufacturing: Tooling design, metal stamping/milling/turning/grinding, injection molding, laser processing, assembly processes.
• Skilled in a 3D CAD software (Solidworks preferred) and 2D CAD software (AutoCAD or Draftsite preferred).
• Experience with PPAP (production part approval process) is preferred.
• Must be able to interpret technical drawings, product requirements and design specifications.
• Understanding of lean manufacturing/six sigma and trained in a statistical software for MSAs and Capability studies (green belt certification and Minitab preferred, respectively)
• Outstanding verbal and written communication skills for different cross-function team members and customer interface.
• Ability to self-educate and learn new processes
• ISO13845 experience is recommended

The Environmental Manager is accountable to identify, develop implement and maintain site environmental policies and procedures to ensure environmental compliance with current and pending local, state, and federal regulations.

About the Role

Site management team member accountable for all aspects environmental compliance internally and externally. Acts as the plant liaison to local, state and federal agencies. Subject matter expert and accountable party on environmental matters for site and regional management. Leads manufacturing and process improvement initiatives related to the environment ensuring the safety and wellbeing of employees and the community. Works to achieve and build an engaged workforce driven to self-directed ownership of environmental processes that achieve the short and long term strategic goals of the organization.

Responsibilities

• Ensure compliance with environmental requirements via the completion of required government and internal reports (including Form R, Tier II, Emission Statement, Semi-annual & annual reports, Biennial waste reporting), training of personnel, development of operating procedures and equipment requirements, "management of change" review, and auditing.
• Identifying regulatory requirements and develop courses of action to ensure both our future compliance and our flexibility to operate profitably.
• Provide plant leadership for the continuous improvement of the ISO 14001 EMS.
• Coordinates identification of environmental aspects, evaluation of significance of environmental aspects, and establishment of environmental objectives and targets.
• Coordinates establishment and implementation of management programs to achieve objectives and targets.
• Project management on facility or operational modifications as assigned.
• Support project engineers on the environmental impact of capital projects.
• Represents the Wallingford Plant in areas where environmental concerns internally and externally to local, state and federal agencies.
• Work with local management to ensure a common understanding of environmental compliance issues and lead in their compliance efforts.
• Schedule and coordinate hazardous waste material bulk loads, drum loads and lab pack pick-ups using approved waste haulers and ensure required paperwork meets state and federal regulations.
• Make positive change regarding plant's processes, including; Environmental training procedures; Plant Standard Operating Procedures; the EMS system, Environmental audits and waste minimization.
• Participate or lead in team investigations of all major incidents. Ensure appropriate root cause(s) and corrective actions are identified and completed in a timely manner.
• Monitor and report plant emissions and discharges.
• Monitor and troubleshoot plant pollution abatement and controls equipment and devices.
• Comply with the Title V air permit including emission testing and LDAR.
• Sample wastewater discharge and complete monthly DMR report.
• Ensure the site meet the requirements of the site owner’s NPDES permit.
• Acts as backup to plant ES&S Manager.

Qualifications

• Bachelor’s Degree in engineering or environmental sciences.
• 10+ years of experience in both Environmental Management and Process Engineering.
• Working knowledge of state and federal regulations.
• Good communication skills both written and oral.
• The ability to present information to senior management and government regulators.
• Maintain current knowledge of applicable EHSS laws and regulations/programs through continuing education seminars/courses.
• Provide positive, proactive leadership with regard to concern by plant employees for the safety and health of their coworkers.
• Identify/coordinate/complete environmental and improvement projects.
• Complete Leak Detection and Repair program weekly, monthly, and annual requirements (involves use of FID with calibration).

Physical Demands & Working Conditions

• Hazardous Exposures: hazardous materials, loud noise, extreme heat or cold.
• Physical Lifting Requirements and frequency: sedentary (up to 10 pounds), light (up to 20 pounds), medium (up to 50 pounds), heavy (over 50 pounds).
• Other Physical Requirements and frequency: occasional (up to 1 hr/day), regular (up to 3 hrs/day), frequent (over 3 hrs/day).
• Climbing.
• Walking.
• Standing.
• Stooping/Kneeling.
• Pulling/Pushing.
• Ability to meet the criteria of plant safety policies/procedures.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 3rd shift.

3rd shift hours are Monday through Friday from approximately 11:00 pm to 7:00 am.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

The Cost Engineer is responsible maintaining a true and accurate cost structure and coordinating reporting elements key to developing accurate cost reports. This is an interface between project management, cost management and accounting.

Responsibilities:

• Comply with (and actively promote) all Safety policies and procedures including reporting all accidents, incidents and near-misses to ensure adherence to our Number One Core Value – Safety first, in everything we do.
• Review project features with Estimating department and ensure that work quantities are being entered correctly on a daily basis.
• Verify proper coding for phases, hours, and slips.
• Close out the completed project phases and verify progress entries.
• Conduct monthly cost review meeting with project team.
• Assign and initiate new cost codes for change orders, tracking items and back charges as required.
• Verify pencil sheets / pay requisitions.
• Take the lead in developing quarterly cost to complete reports.
• Review and process change orders for TMC and subcontractors / vendors.
• Review and process cost adjustments.
• Identify items that are exceeding the budget and communicate to Project Manager.
• Assist project management team with quarterly reports for contract status, contract profit, unit cost report, cost projections, revenue projects, change order status and change order costs.

Qualifications:

• Bachelor's degree in Construction Management, Engineering or related field and / or minimum of 5 years of heavy civil construction experience
• Experience working with project management and a thorough knowledge of heavy construction logistics, resource planning, construction sequencing and material management preferred.
• Familiar with a variety of the field construction concepts practices, and procedures.
• Demonstrated knowledge of Viewpoint Accounting and Job Costing System is desirable.

Necessary Attributes:

• Must possess the ability to adapt to different personalities and management styles.
• Attention to detail, organization prioritization and the ability to handle multiple tasks is required.
• Team player and with strong interpersonal skills.
• Strong verbal and written communication skills.
• Must possess strong technology skills.
• Self-starter with good verbal and written communication skills.
• Reliance on experience and judgment to plan and accomplish goals.
• Dedicated and hard working.
• Strong commitment to success of all.
• Possess a strong work ethic.
• Demonstrate the upmost professionalism in how you represent yourself.
• Show quality in everything you do.
• Lead with integrity while producing high quality work.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

The Assistant Project Manager shall oversee the total construction effort to ensure projects are safely constructed in accordance with design, budget, and schedule. This includes interfacing with client representatives, subcontractors, and suppliers.

Responsibilities:

• Comply with (and actively promote) all Safety policies and procedures including reporting all accidents, incidents and near-misses to ensure adherence to our Number One Core Value – Safety first, in everything we do.
• Review project features with the Estimating Department.
• Work with the Project Engineer and Superintendent to develop and maintain a project schedule with the appropriate attributes.
• Submit preliminary paperwork such as submittals, introductory letters, subcontractor approvals, lump sum breakdowns of work items, affirmative action documents, etc.
• Develop a submittal log, a project organization chart, and a material storage plan.
• Initiate project startup and closeout sheet and submit a copy to the construction department and set up and maintain project files.
• Required to sign off on the budget prior to the start of construction.
• Responsible for all aspects of cost management for the project.
• Submit a quarterly cost revision with an explanation of any cost variance.
• Submit change order logs to the regional office monthly.
• Coordinate and direct all project activities with the Project Superintendent/General Superintendent to ensure that all milestones are met and job continuity is maintained.
• Conduct weekly meetings.
• Prepare and review periodic estimates with the owner's representative/Resident Engineer and submit an approved original estimate or pencil sheet copy to the regional office with the appropriate subcontractor quantity split.
• Attend final punch list inspection and/or closeout meeting and complete final documents.
• Maintain contact with the project Owner and Architect/Engineer to obtain reduction of retainage and final payment and close out jobsite office.

Qualifications:

• B.S. in Civil Engineering major or construction related field.
• Minimum of 5 years of successful and progressive experience in the civil construction field.
• Experienced in budget management, schedule, quality control, and knowledge of all phases of construction.
• OSHA 10 Certified.

Necessary Attributes:

• Must possess the ability to adapt to different personalities and management styles.
• Team player and with strong interpersonal skills.
• Ability to manage a team in an efficient and effective manner.
• Self-starter with excellent verbal and written communication skills.
• Reliance on experience and judgment to plan and accomplish goals.
• Dedicated and hard working.
• Possess strong leadership qualities.
• Above average organizational skills.
• Strong commitment to success of all.
• Possess a strong work ethic.
• Demonstrate the upmost professionalism in how you represent yourself.
• Show quality in everything you do.
• Lead with integrity while producing high quality work.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

We are seeking a detail-oriented Electrical Test Engineer with experience in hardware systems and embedded firmware environments. This role focuses on validating the functionality, reliability, and performance of electronic products through structured test development and execution. The ideal candidate will collaborate with multidisciplinary engineering teams to support product quality throughout the development lifecycle.

Key Responsibilities

Test Development & Validation

• Create and implement structured test plans, procedures, and scripts to verify hardware and firmware requirements.
• Perform functional, performance, and reliability testing on embedded systems and electronic assemblies.
• Ensure products meet defined specifications and quality benchmarks.

Automation & Tools Development

• Develop and maintain automated test frameworks for electronic systems.
• Build scripts and utilities to streamline validation processes and improve repeatability.
• Contribute to continuous enhancement of test infrastructure and methodologies.

Debugging & Root Cause Analysis

• Troubleshoot firmware and hardware issues using standard laboratory instrumentation.
• Analyze system behavior to isolate faults and support corrective actions.
• Partner with development engineers to resolve defects efficiently.

System Integration Testing

• Validate interaction between hardware components (e.g., PCBs, sensors, communication interfaces) and embedded firmware.
• Conduct integration and regression testing to ensure overall system stability.

Cross-Functional Collaboration & Documentation

• Work closely with engineering, quality, and project stakeholders to coordinate testing activities.
• Document test procedures, results, and defect reports in a clear and organized manner.
• Provide technical feedback to support design improvements.

Process Improvement

• Identify opportunities to improve validation processes, coverage, and efficiency.
• Stay current with emerging tools, technologies, and best practices in electronic testing.

Required Qualifications

• Bachelor's degree in Electrical Engineering or related discipline from an accredited institution.
• Solid understanding of circuit analysis and electronic theory (AC/DC fundamentals).
• Working knowledge of analog and digital circuits, including amplifiers, switching circuits, regulators, filters, and I/O interfaces.
• Hands-on experience with common lab equipment such as oscilloscopes, digital multimeters, and signal generators.
• Experience with schematic capture tools, CAD platforms, and integrated development environments.
• Proficiency in embedded firmware development using C/C++.
• Familiarity with electronic component selection and evaluation.
• Understanding of PCB assembly processes and electronic manufacturing fundamentals.
• Strong analytical, documentation, and communication skills.
• Ability to work effectively within cross-disciplinary engineering teams.

Preferred Qualifications

• Experience with communication interfaces such as CAN, USB, Ethernet, or similar protocols.
• Exposure to embedded Linux environments.
• Familiarity with wireless communication technologies.
• Experience using issue tracking and collaboration tools.
• Working knowledge of version control systems (e.g., Git or similar tools).