Engineering Jobs in Marlborough, CT

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI629cfb2ee342-26289-39815000

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

• Perform complex welding repairs on aerospace components in accordance with approved repair procedures, work instructions, and customer specifications.
• Execute welding processes such as TIG (GTAW) and other applicable methods on aerospace alloys (e.g., nickel-based alloys, stainless steel, aluminum, titanium).
• Interpret engineering drawings, weld symbols, repair manuals, and technical instructions.
• Restore components to serviceable condition while maintaining dimensional integrity and material properties.

• Ensure all welding and repair activities comply with AS9100, FAA/EASA requirements (as applicable), and internal quality procedures.
• Complete required documentation accurately, including travelers, repair records, and inspection sign-offs.
• Support internal, customer, and regulatory audits.
• Work closely with Quality and Engineering to resolve nonconformances and repair challenges.

• Perform in-process inspections and visual weld inspections per applicable standards.
• Support NDT processes (e.g., FPI) before and after welding repairs.
• Maintain welding equipment, tooling, and fixtures in proper working condition.
• Identify opportunities to improve repair methods and reduce rework.

• Serve as a technical resource and mentor the MRO team members.
• Assist with training, qualification, and skill development of welding personnel.
• Provide input on process improvements, tooling needs, and repair development.

• HS Diploma or equivalent, technical certification in welding.
• 7+ years' of welding experience in an aerospace manufacturing or MRO environment.
• Demonstrated expertise in TIG welding for aerospace applications.
• Ability to read and interpret complex engineering drawings and weld symbols.
• Strong understanding of aerospace quality and repair requirements.
• Excellent attention to detail and workmanship.
• FAA Repairman Certification.
• Commitment to safety, quality, delivery, and customer service.

• Primary duties will be on the shop floor, working in a manufacturing environment.
• Must be able to stand for extended periods of time while performing manual work.
• Good hand-eye coordination and manual dexterity in both hands.
• Must be able to lift up to 35 pounds unassisted, stand, squat, bend, twist, and reach often.
• Exposure to various temperatures, noise and vibration from power equipment, dust, and fumes.

Company Description:

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.

Summary:

We are seeking a skilled and detail oriented Production Supervisor in our Glastonbury location to plan, direct, and coordinate all assigned operations following manufacturing objectives. As a Production Supervisor, you will manage and provide direction to departmental personnel in implementing modern, cost-effective practices to achieve the goals of the department according to all safety, quality, housekeeping, and production standards. This position will supervise all personnel and operations in the department by employing leadership, hands-on technical support, scheduling, and project management.

Essential Functions:

• Monitor manufacturing activities and ensure manufacturing processes are being followed and that all quality requirements are being met or exceeded.
• Review and dispose of all scrap produced in the department which includes effective root cause and corrective action analysis.
• Direct departmental activities providing assurance of safety, health, and compliance with environmental rules and regulations.
• Directly supervises the employees in their department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws.
• Engage in efforts to continuously improve the processes on the shop floor.
• Ensure that HR policies, procedures, and regulations are followed and documented.
• Maintain a thorough knowledge of all processes and equipment.
• Meet departmental metrics.
• Perform other related duties or responsibilities as required.

Required Qualifications & Experience:

• Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data.
• High School Diploma or GED required.
• 5+ years experience in a manufacturing environment; aerospace preferred.
• 3+ years of supervision experience.

Desired Knowledge, Skills, and Abilities:

• Bachelor’s or Associate’s degree in Engineering or other related field preferred.
• Must be able to read, write, understand, and speak English at a functional level.
• Ability to interpret and edit FANUC G-code programming.
• Proficient in FANUC, Okuma controls.
• Ability to communicate professionally and effectively with all levels of the organization.
• Ability to interpret policies, procedures, and standard business practices.
• Ability to read and interpret blueprints and engineering work instructions.
• Ability to initiate, record, recommend, verify, and implement corrective actions or solutions to problems relating to product, process or quality system.
• Fluent in Microsoft Office applications.
• Must have strong attention to detail.
• Ability to travel domestically. – 5%

Reasonable accommodation may be made to enable individuals with disabilities to perform.

• Accelerated Career Growth!
• Competitive Base Salary and Bonus!

• Develop, implement, and improve welding processes and procedures to enhance product quality and productivity.
• Utilize CAD, AutoCAD, and SolidWorks to design and develop welding fixtures and tooling.
• Lead the implementation of New Product Introduction (NPI) processes for welding operations.
• Apply Lean Manufacturing principles to optimize welding processes and reduce waste.
• Collaborate with cross-functional teams to address and resolve manufacturing, quality, and reliability issues.
• Train and mentor junior engineers and technicians on welding techniques and procedures.
• Conduct root cause analysis of welding defects and implement corrective actions.
• Manage welding equipment maintenance and calibration to ensure optimal performance.
• Stay abreast of the latest advancements in welding technologies and industry best practices.

• Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in weld manufacturing engineering.
• Proven experience with CAD, AutoCAD, and SolidWorks.
• Excellent knowledge of laser and robotic welding techniques.
• Strong understanding of Lean Manufacturing principles.
• Experience with New Product Introduction (NPI) processes.
• Exceptional problem-solving and analytical skills.
• Excellent communication and leadership skills.
• Ability to work effectively in a fast-paced, team-oriented environment.
• Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) certification is a plus.

• 5+ yrs of Frontend Development experience, building & engineering user interfaces
• Expertise with React
• Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members
• Python, Django, and FastAPI
• Prior startup experience

• Kubernetes, Argo, and Google Cloud Platform
• Experience building full-stack applications from scratch
• Infrastructure as code and DevOps experience

• 5+ yrs of Frontend Development experience, building & engineering user interfaces
• Expertise with React
• Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members
• Python, Django, and FastAPI

• Kubernetes, Argo, and Google Cloud Platform
• Experience building full-stack applications from scratch
• Infrastructure as code and DevOps experience

Women’s Health Connecticut is seeking to hire a Full-time, Revenue Cycle, Application Support Specialist!

Position: Revenue Cycle, Application Support Specialist

Location: Women’s Health Connecticut

Address: 175 Capital Blvd. Rocky Hill, CT 06067

Employment Type: Full-time, 40 hours per week

Working arrangement: Hybrid, 2-3 days onsite/in-office

Schedule: Monday- Friday, 8:00am- 5:00pm

Reports to: Director of Application Support Team

Position Summary: The Application Support Specialist, Revenue Cycle supports, configures, and optimizes healthcare applications supporting our revenue cycle operations, including athenaOne and Aptarro (RCxRules). This role partners with operational, clinical, technical, and vendor teams to ensure practice and central billing office workflows are accurately configured, maintained, and continuously improved.

By managing systems and workflows across the revenue cycle—from patient registration through final payment posting, the Specialist reduces errors, accelerates payment timelines, and improves overall financial performance. This position also plays a key role in end‑user training, system adoption, and ongoing application support.

Essential duties and responsibilities:

• Provide application support for athenaOne and integrated revenue cycle systems.
• Deliver on‑site and remote training for providers and staff, including new‑hire, refresher, and workflow‑specific training.
• Support end users during go‑live events and post‑implementation stabilization.
• Create and update training materials, policies, workflows, and standard work documentation.
• Troubleshoot application issues and escalate to vendors and/or internal teams as appropriate.
• Evaluate clerical and clinical workflows to ensure accurate system design.
• Review workflows, data collection, reporting logic, and system behavior.
• Complete ad‑hoc and routine scheduled updates to provider, location, fee schedules, and other system master files.
• Create and maintain documentation for training, policies, procedures, workflows, and internal communications.
• Administer application access, identity, and security, including insurance website access.
• Create, test, and maintain charge pass rules supporting automated charge capture.
• Troubleshoot rule behavior and system output to identify root causes and resolution paths.
• Collaborate with vendor resources to resolve complex configuration and performance issues.
• Anticipate issues, identify trends, and present solutions to operational leadership.
• Support application upgrades, enhancements, and optimization initiatives.
• Participate in team meetings, cross‑functional initiatives, and knowledge‑sharing efforts.
• Demonstrate initiative, adaptability, and strong customer service orientation.
• Promote a positive team environment focused on continuous improvement and service excellence.

Skills/qualifications:

• Understanding of the complete Revenue Cycle, including insurance verification, charge capture, claims processing, posting, denials, and patient billing
• Experience with athenaOne, or other EHRs and application master files
• Hands‑on experience training, support, and collaboration with end‑users to improve workflows
• Knowledge of payer portals, insurance website administration, and handling patient billing inquiries
• Exposure to Aptarro (RCxRules) or other charge passing rule engine (rule creation & troubleshooting)
• Effectively prioritizes work with exceptional attention to detail and strong organizational discipline
• Proficient in Microsoft 365, collaborative tools, and everyday workplace technology

Qualified candidates are encouraged to apply to learn more about all the position has to offer!

The Job responsibilities provided are intended to be a summary of the job duties. In no instance should the duties, responsibilities, and requirements included in a job description constitute as being all-inclusive. The Company and authorized management personnel reserve the right to review, change, add and/or delete duties, responsibilities, and requirements on a job description as necessary.