Engineering Jobs in Long Beach, CA

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

• Seeking an experienced Associate Principal to lead and design scalable technical architectures with expertise in Architecture Patterns SOA and Microservices
• Design and develop comprehensive architectural diagrams to guide system development and integration Apply advanced Architecture Patterns and Styles to create scalable reliable and maintainable solutions.
• Lead the design and implementation of SOA and Microservicesbased architectures to support business agility
• Collaborate with cross-functional teams to align technical architectures with business goals and requirements
• Evaluate emerging technologies and recommend architectural improvements to enhance system performance and scalability
• Ensure adherence to architectural standards and best practices across projects.
• Mentor and guide technical teams on architecture principles and design methodologies

Roles and Responsibilities

• Drive the architectural strategy and vision for complex enterprise solutions within the Technical Architecture family
• Develop and maintain architectural frameworks and governance to ensure consistency across projects
• Conduct architectural reviews and provide expert guidance to development teams
• Facilitate communication between stakeholders, including business development and operations teams. Identify risks and propose mitigation strategies related to architectural decisions
• Lead innovation initiatives by exploring new architectural styles and patterns
• Provide leadership in troubleshooting and resolving complex architectural issues
• Support the professional growth of team members through coaching and knowledge sharing

Mandatory Skills :

• Architecture Patterns and Styles
• Microservices Architecture
• Architectural diagrams
• SOA and Microservices-Based Architecture
• Software Engineering and Design Architecture
• CI/CD Architecture
• Service-Oriented Architecture
• Architectural Patterns

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our shipping department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Warehouse Associate to join our Shipping Department team. As a Warehouse Associate, you will play a crucial role in ensuring the efficient and accurate processing of outgoing orders and shipments. Your attention to detail, strong organizational skills, and commitment to teamwork will contribute to the success of our shipping operations.

Key Responsibilities:

- Prepare and pack orders for shipment, ensuring accuracy and completeness of items.

- Utilize shipping software and equipment to generate shipping labels, packing slips, and other required documentation.

- Conduct quality checks on outgoing orders to ensure they meet company standards.

- Collaborate with other team members to prioritize orders and shipments based on deadlines and customer requirements.

- Operate forklifts and other warehouse equipment safely and efficiently.

- Maintain a clean and organized work area, following company guidelines for warehouse organization.

- Assist in receiving and inspecting incoming shipments when necessary.

- Communicate effectively with the team and supervisors, providing updates on order status and potential issues.

Qualifications:

- High school diploma or equivalent.

- Previous experience in a warehouse or shipping environment preferred, but not required.

- Forklift certification is a plus.

- Ability to lift and move packages (up to 50 pounds).

- Strong attention to detail and accuracy.

- Basic computer skills, including experience with shipping software.

- Excellent communication and teamwork skills.

- Willingness to learn and adapt to changing tasks and priorities.

- Ability to work in a fast-paced and physically demanding environment.

- Reliable and punctual with a strong work ethic.

We provide a comprehensive benefits package, including health insurance, a profit-sharing plan, paid time off, and more.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) “5S”. Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our inventory department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Inventory Associate to join our Inventory Department team. You will play a crucial role in maintaining accurate inventory records, ensuring the availability of products, and optimizing inventory levels. This role requires strong analytical skills, attention to detail, and the ability to work collaboratively with various departments.

Key Responsibilities:

· Monitor and maintain inventory levels to ensure adequate stock availability

· Conduct regular inventory audits and reconcile discrepancies

· Coordinate with suppliers and vendors to manage incoming shipments and deliveries

· Implement and improve inventory management systems and processes

· Generate and analyze inventory reports to identify trends and areas for improvement

· Assist in the development and implementation of inventory control strategies

· Operate forklift and other warehouse equipment safely and efficiently

Qualifications:

· High school diploma or equivalent

· Previous experience in a warehouse or shipping environment preferred, but not required

· Forklift certification is a plus

· Ability to lift and move packages (up to 50 pounds)

· Strong attention to detail

· Basic computer skills, including experience with excel, inventory software or WMS, are a plus

· Excellent communication and teamwork skills

· Ability to work in a fast-paced and physically demanding environment

· Strong analytical and problem-solving skills

· Reliability and punctuality with a strong work ethic

· Excellent organizational and time management abilities

· Effective communication and interpersonal skills

· Ability to work independently and as part of a team

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Our client in Torrance is seeking an experienced Buyer III to support procurement activities for government programs. The role involves sourcing materials, negotiating with suppliers, issuing purchase orders, and ensuring compliance with government procurement regulations.

Because most work supports U.S. Government prime contracts, experience with DCMA CPSR (Contractor Purchasing System Review) processes is highly important. The buyer will be responsible for preparing CPSR-compliant PO folders and documentation prior to issuing purchase orders, including managing contract flow-down requirements to suppliers.

Key Responsibilities

• Source and purchase materials, components, and services
• Negotiate pricing, delivery, and supplier agreements
• Prepare CPSR-compliant PO documentation and approval folders
• Ensure government contract flow-down requirements are included in POs
• Track supplier performance, delivery schedules, and inventory needs
• Resolve supplier, delivery, and invoice issues
• Work with engineering, planning, production, and finance teams

Required Qualifications

• Bachelor’s degree or 8+ years of procurement/buying experience
• Experience with ERP systems (Oracle preferred)
• Strong Excel and Microsoft Office skills
• Knowledge of government procurement regulations (FAR, DFAR, ITAR)
• Experience with DCMA CPSR processes and PO justification requirements
• Strong negotiation, organization, and problem-solving skills
• Experience sourcing technical components such as machined parts, electronics, PCBA, cables, connectors, and hardware

ERP Manager (Microsoft Dynamics 365 Business Central)

Location: Torrance, CA (Hybrid work environment)

Employment Type: Full-time

Salary Range: $90,000 – $110,000 annually (commensurate with experience)

Work Authorization: Must be authorized to work in the U.S. without sponsorship.

Position Overview

We are seeking an experienced ERP Manager to lead ERP implementation initiatives while also supporting presales activities and business development efforts. This role combines project management, functional leadership, client-facing presales support, and strategic system planning. The ERP Manager will work closely with executive leadership, sales teams, offshore engineering teams, and clients to design ERP solutions that align with operational and financial objectives. This role also requires occasional travel to client sites to support implementation activities, user testing, and training.

Key Responsibilities

1. Project Leadership & Delivery

· Lead full-cycle ERP implementation projects from discovery to go-live and post-launch support

· Develop and manage project plans, budgets, and resource allocations

· Manage risks, scope, and client expectations

· Ensure on-time and on-budget project delivery

· Coordinate with offshore engineering teams to optimize task allocation and maintain development quality

2. Presales & Solution Consulting

· Participate in client discovery meetings and requirements workshops

· Provide solution design support during proposal development

· Prepare high-level solution architecture and implementation approaches

· Estimate project scope, timelines, and resource requirements

· Support RFP/RFI responses and client presentations

· Partner with Sales to help close ERP-related opportunities

3. Business & Functional Leadership

· Translate business requirements into functional ERP configurations

· Advise clients on best practices in Finance, Sales, Purchasing, and Inventory processes

· Identify opportunities for automation and operational efficiency

· Align ERP capabilities with financial reporting and management needs

4. Team & Executive review Management

· Supervise internal ERP consultants and coordinate with external vendors

· Work with global/HQ teams on cross-border ERP initiatives

· Collaborate with offshore engineers to ensure efficient delivery and consistent implementation quality

· Mentor junior consultants and build internal ERP capabilities

· Communicate effectively with executive leadership and department heads

5. Governance & Continuous Improvement

· Support user acceptance testing (UAT) and implementation readiness

· Provide client training and guidance to ensure successful system adoption

· Travel to client sites when needed to assist with testing, training, and implementation support

· Establish ERP governance and documentation standards

· Monitor system performance and recommend enhancements

· Drive adoption of Microsoft ecosystem tools (Power Platform, reporting tools, etc.)

Required Qualifications

· 5+ years of ERP implementation experience

· 2+ years of project leadership or PM experience

· Experience participating in presales or solution consulting activities

· Strong experience with Microsoft Dynamics 365 Business Central preferred

· Solid understanding of Finance, Accounting, Sales, Purchasing, and Inventory processes

· Experience preparing project estimates and implementation plans

· Experience collaborating with offshore or distributed engineering teams

· Willingness to travel to client sites for testing support and user training when needed

· Excellent client-facing communication skills

· Business-level Japanese proficiency (日常会話レベル以上)

· Must be authorized to work in the U.S. without sponsorship

· Must be available for hybrid work

Preferred Qualifications

· Experience in IT services or ERP consulting firms

· Experience supporting Japanese subsidiaries in the U.S.

· Familiarity with Microsoft Power Platform

· PMP certification or equivalent

· Experience in manufacturing or distribution environments

Number of Openings

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our customer solutions department for a Technical Product Support Specialist.

• Pay range is $20-35/hr (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

Job Description:

• Serve as the first point of contact for technical inquiries via phone, email, live chat, or a ticketing system.
• Troubleshoot and resolve basic product issues related to installation, configuration, and performance for products such as LED fixtures and lighting control systems.
• Provide pre- and post-sales technical support to sales teams and end-users.
• Document customer interactions, troubleshooting steps, and resolutions clearly and accurately within a ticketing system.
• Escalate complex or unresolved issues to engineering teams and track their progress until resolution.
• Maintain and update internal knowledge base articles and documentation for common issues and solutions.
• Identify errors or omissions in customer facing documentation and work with relevant departments to resolve or improve.
• Stay up-to-date with new product launches, technical specifications, and industry standards by participating in regular training sessions.
• Assist with other technical and product-related tasks as assigned, such as creating wiring diagrams or conducting customer training.
• Assist with onsite customer service visits if required.

Requirements:

• Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred.
• Experience: 1+ years of experience in a customer-facing role, preferably in a technical support, customer service, or inside sales position.
• Technical knowledge: Basic understanding of electrical systems, LED lighting, and common troubleshooting techniques is highly desirable. Experience with lighting control systems (e.g., DMX, 0-10V, smart home controls) is a plus.
• Customer service skills: Proven ability to provide excellent service and maintain a positive, patient, and professional attitude, especially during stressful situations.
• Communication: Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical users.
• Problem-solving: Strong analytical and diagnostic skills with keen attention to detail.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.

Essential Responsibilities

• 
  
• Support the highest standards of safety and environmental practices.
  
• Deburr machined components for sharp edges.
  
• Hand blend machined and welded surfaces to drawing requirements.
  
• Hand abrade components to desired finish for weld.
  
• Clean components and assemblies per drawing and/or manufacturing work instructions.
  
• Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
  
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
  
• Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
  

$23-$26 per hour

• High school diploma or General Education Degree (GED).
• Aerospace manufacturing experience preferred.

This position is currently accepting applications.

Apply Now

Late Shift Machinist - Full Time - Santa Fe Springs, CA

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Machinist and help us take our Service Center to the next level.

In this role you will be accountable for:

* Performing layouts, setting up and operating conventional machine tools as required

* Reading and interpreting all drawings, including geometric dimensioning and tolerancing

* Designing setup methods where none exist

* Instructing other shop personnel on proper machining techniques

* Continually improving methods to deliver higher quality with improved costs

To succeed in this role, you will need:

* Completion of a machinist apprentice program or equivalent training

* Ability to hold close tolerances and conduct component inspections

* Ability to setup machine tools: ID / OD Grinders, Turret Lathe, Engine Lathe, Horizontal Boring Mill, Vertical Boring Mill, Radial Drill, Planer Mill

* Four years of experience in machine shop operations

* Willingness to work in a team environment

* Openness to working overtime as required

If you're a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career!

Your benefits:

* 15 days of paid time off and 11 company-paid holidays

* 401k plan with a 6% match

* Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability

* Motivating wellness program

* Employee Assistance Program

Location: We are based in Santa Fe Springs, CA.

We are looking forward to hearing from you!

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

82% of our employees recommend Sulzer as a good place to work - so come and join our story, starting today!

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

CNC PROGRAMMER (STARSHIP COMPONENTS) - LEVEL 4/5

As a CNC Programmer at SpaceX, you will have the opportunity to utilize your knowledge, experience, and creativity to develop novel solutions at the cutting edge of space technology. You will work on hardware that will deliver satellites into Earth orbit, ferry humans to and from the International Space Station, and ultimately extend humanity's reach beyond the Earth and Moon. You will provide input into the design and development of new and existing hardware and take a lead role in creating robust machining processes to create parts for our current and next generation vehicles.

RESPONSIBILITIES:

* Use Esprit CAM to program and generate G-Code for Okuma mill-turn lathes and mills, with a focus on optimizing complex, multi-axis programs

* Create and refine tooling and process setup sheets for new part introductions, incorporating lessons learned from prior iterations

* Set-up, prove out, and operate programs on Okuma mill-turn lathes and mills, troubleshooting issues independently to minimize downtime

* Contribute to the development and utilization of a CAM database for efficient new part programming, including data analysis to improve repeatability

* Review quality concerns from piece part inspection, lead root-cause analysis, and implement corrective actions to processes

* Analyze piece parts for DFM to ensure optimization for manufacturing; collaborate closely with engineering to recommend and implement drawing changes

* Integrate feedback from engineering and production to rapidly iterate on part processes and designs, mentoring junior programmers on best practices

* Pursue and share continuous education opportunities; stay up to date on the latest manufacturing technologies and integrate them into team workflows

* Proactively keep products moving, identify potential production inhibitors early, and propose solutions to management

* Maintain physical 5S and electronic organization with adherence to shop/SpaceX standards; assist in developing and enforcing standards for broader team adoption

* Collaborate with other SpaceX machine shop facilities to share capabilities, optimize resource allocation, and resolve capacity/scheduling challenges

BASIC QUALIFICATIONS:

* High school diploma or equivalency certificate

* 5+ years of CNC machining experience

* 2+ years of CNC programming experience

PREFERRED SKILLS AND EXPERIENCE:

* Understanding of advanced machining processes and equipment, including integration of automation

* Proficiency in CNC programming using Esprit CAM software, with experience in custom post-processing

* Solid knowledge of geometry, algebra, and trigonometry applied to complex part geometries

* Experience reading blueprints and interpreting all drawing criteria, notes, and GD&T with high accuracy

* Familiarity with Okuma OSP controls and troubleshooting multi-axis operations

* Experience programming multi-axis lathes and mills, including 4- and 5-axis applications

* Demonstrated ability to assess personal and team performance, seek feedback, pursue training, and share expertise to build team capabilities

* Proactive approach to quality improvement, with a track record of accuracy, thoroughness, and process enhancements

* Experience drafting detailed instructions, such as safety protocols, operating/maintenance guides, and procedural manuals

* Strong skills in routine and technical correspondence to facilitate clear communication across teams

ADDITIONAL REQUIREMENTS:

* Ability to work one of the following shifts, overtime, and weekends as needed:

* 1st shift start time is 5:00 AM

* 2nd shift start time is 3:00 PM

* Ability to lift up to 25 lbs. unassisted

* Ability to work with your hands and use tools/controls

* Must be willing to work in an environment that is in close proximity to loud machinery and in a facility that uses coolants, solvents, and cleaners regularly

COMPENSATION AND BENEFITS:

Pay range:

Level 4: $45.50 - $56.00/hour

Level 5: $51.00 - $63.00/hour

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year.

ITAR REQUIREMENTS:

* To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to .

• Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.
• Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.
• Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.
• Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.
• Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.
• Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.
• This job description is not all inclusive of all duties. Other duties may be assigned.

• Requires High School degree or GED. Related AA or trade school degree preferred.
• Requires 2+ years of related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management.
• US Citizenship or permanent residency.

• ASQ Certified Quality Inspector preferred
• Experience working in AS9100 production environment preferred
• Must be able to read and analyze engineering drawings and blueprints to determine requirements.
• Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.
• Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
• Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
• Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
• Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
• Must be familiar with AS9102 standards and software, and military specifications.
• Experience using Net-Inspect standards and software preferred.
• Must interface effective across organizational levels.
• Must have good organizational skills and maintain accurate, complete documentation.
• Must have excellent communication skills, both written and oral.
• Must be proficient with the use of the Internet, MS Word/Outlook.

• N/A

• Lift up to 50 lbs.
• Push and pull 50 lbs.
• Bend Occasionally
• Sit, Stand, and Walk Frequently

• Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
• ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.

Faraday Future (FF) is a California-based mobility company, leveraging the latest technologies and world's best talent to realize exciting new possibilities in mobility. We're producing user-centric, technology-first vehicles to establish new paradigms in human-vehicle interaction. We're not just seeking to change how our cars work we're seeking to change the way we drive. At FF, we're creating something new, something connected, and something with a true global impact.

We are seeking a strategic and driven Senior Manager, Product Marketing to lead our go-to-market efforts for the next generation of luxury electric vehicles. This pivotal role bridges product innovation and customer storytellingbringing together market insight, technical knowledge, and customer experience to deliver impactful marketing strategies and product launches.

• Lead market and user research to define luxury EV buyer personas and decision-making journeys.
• Monitor industry and technology trends, including global EV policy developments, charging infrastructure evolution, and competitor moves in pricing and innovation.

• Develop comprehensive, full-funnel marketing strategies across the product lifecyclefrom awareness and pre-order to delivery and ownership.
• Craft compelling value propositions and translate technical features into clear, customer-centric benefits.
• Partner with product, design, and regional teams to support international market entry strategies.

• Lead cross-functional go-to-market planning and execution, ensuring alignment across product, manufacturing, sales, and communications.
• Build sales enablement materials including competitive battle cards, product configurator guides, and training decks.
• Support launch event planning and coordination, from strategy to messaging alignment.

• Define and track key performance indicators (KPIs) such as brand awareness, lead-to-order conversion, and customer retention.
• Conduct A/B testing and marketing ROI analysis to refine messaging, channels, and investment strategies.
• Document learnings and develop repeatable GTM playbooks for future product launches.

• 10+ years of experience in product marketing within automotive, electric vehicles, luxury consumer goods, or tech hardware industries.
• Proven track record managing complex product launches under tight timelines in fast-paced environments.
• Strong command of customer segmentation, go-to-market strategy, and sales enablement.
• Analytical mindset with experience in ROI measurement and marketing optimization.
• Excellent verbal and written communication skills with a knack for storytelling and translating complexity into clarity.
• Bachelor's degree in Marketing, Business, Engineering, or a related field.

• Startup or hyper-growth company experience.
• Familiarity with international markets, especially North America and China.
• Passion for sustainability, design, and innovation in the mobility sector.

($145K - $175K DOE), plus benefits and incentive plans

• Healthcare + dental + vision benefits (Free for you/discounted for family)
• 401(k) options
• Casual dress code + relaxed work environment
• Culturally diverse, progressive atmosphere

Faraday Future is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Company:

The company is a leading metal additive manufacturing (AM) partner for aerospace and defense organizations. They design, optimize, and produce mission-critical hardware that enables customers to leverage AM technologies in ways previously thought impossible. Their team supports cutting-edge programs across aviation, space, and national defense, delivering engineering excellence from concept through production.

About the Role:

The Principal Additive Manufacturing Engineer – Applications is a senior, customer-facing technical authority. You will work directly with aerospace and defense primes, OEMs, and government organizations to guide AM strategy, influence design decisions, and deliver advanced metal AM solutions for high-stakes missions. This role operates at a peer-to-peer level with senior customer engineers and plays a key part in shaping the future of AM adoption across critical defense and aerospace programs.

What You'll Do:

• Serving as the senior technical lead and trusted advisor for key aerospace and defense programs.
• Leading AM strategy, qualification plans, and adoption pathways across complex customer missions.
• Running technical design reviews, engineering workshops, and program strategy sessions with customer leadership.
• Translating mission and performance requirements into optimized metal AM solutions that balance cost, risk, and reliability.
• Developing high-impact proposals, white papers, and technical recommendations for advanced AM applications.
• Driving implementation of DfAM best practices, simulation-based optimization, and qualification approaches for mission-critical hardware.
• Working cross-functionally with business development, manufacturing, and quality teams on capture strategies and program execution.
• Acting as the primary technical interface from concept through qualification and production.
• Mentoring engineers and elevating the organization's customer-facing AM technical depth.
• Ensuring compliance with aerospace standards: AS9100D, NADCAP, MIL-SPEC, ITAR, and other regulatory requirements.

What You Need to Bring:

• Recognized expertise in metal additive manufacturing for aerospace and defense applications.
• A proven ability to influence design, qualification, and engineering decisions at primes, OEMs, and government agencies.
• Deep knowledge of LPBF/DMLS, DED, and hybrid AM processes and relevant alloys (Ti, Ni, Al, Cu).
• Strong background in aerospace materials science, metallurgy, and thermal-mechanical behavior of AM components.
• Proficiency in CAD (NX preferred), AM simulation tools, and FEA, with the ability to present technical findings clearly.
• Demonstrated success presenting to executive and non-technical customer stakeholders.
• Understanding of AS9100D, NADCAP, MMPDS, MIL-SPEC, and aerospace certification and qualification pathways.
• Leadership skills to mentor and guide engineering teams in both technical execution and customer engagement.
• Bachelor's degree required (Mechanical, Aerospace, or Materials Engineering).
• Master's degree preferred.
• 10+ years in aerospace/defense AM engineering, advanced design, or manufacturing applications.
• Eligibility to obtain and maintain a DoD SECRET Security Clearance (required for employment).

Benefits:

• Comprehensive medical, dental, and vision insurance
• 401(k) retirement plan
• Dynamic, collaborative culture focused on innovation and professional growth

Why Join:

Join a team that's redefining aerospace and defense manufacturing through innovation, collaboration, and purpose. Here, you'll:

• Work on real flight hardware that supports next-generation space and defense missions.
• Be part of a fast-growing, hands-on engineering culture where your ideas make an impact.
• Collaborate with experts across design, materials, and production to advance the frontiers of metal 3D printing.
• Access career development opportunities, advanced AM technologies, and a mission-driven environment that values curiosity and continuous learning.

Eleven Recruiting is hiring an experienced Senior Quality Engineer to join one of our largest aerospace companies sitting onsite in Bell Gardens, CA. This role will manage all Quality Assurance activities related to the plating process, ensuring compliance with industry standards and driving continuous improvement initiatives. The Quality Engineer will collaborate with internal teams, suppliers, and customers to address and resolve quality issues, maintain efficient inspection processes, and contribute to the overall excellence of our quality management system.

Responsibilities:

• Develop and implement quality processes to reduce plating defects and meet flow-down requirements.
• Lead rejection reviews and non-conformance investigations, collaborating with internal teams, suppliers, and customers.
• Perform root cause and corrective action analysis (RCCA) using industry-standard tools.
• Drive improvement initiatives using Lean and Six Sigma methodologies.
• Maintain QMS documentation and train teams on ISO9001, AS9100, IATF 16949, and Nadcap AC7108 compliance.
• Conduct internal audits and support external audits to maintain certification standards.
• Develop and oversee inspection processes for incoming, in-process, and final stages.
• Prepare and maintain standard work instructions, process control plans, and core automotive tools (e.g., APQP, PPAP, FMEA).
• Analyze data trends to identify opportunities for improvement and optimize quality metrics.
• Manage supplier quality surveys and maintain the Approved Suppliers List.
• Work as an active team member to address quality issues, enhance productivity, and foster continuous improvement.

Qualifications:

• Bachelor's degree in science, technology, engineering, mathematics, or relevant industry experience.
• Minimum of 5 years of experience as a Quality Engineer, preferably in aerospace manufacturing within an AS9100-based QMS environment.
• Strong expertise in data analysis, problem-solving, and statistical techniques.
• Proficient in interpreting technical information such as blueprints, schematics, and technical specifications.
• Experience drafting technical documentation and instructions to support QMS activities.
• Knowledge of contract review for new product introductions and RMA processes.
• Familiarity with quality and manufacturing metrics, including SPC.
• Internal audit experience with ISO9001, AS9100, and/or IATF16949 standards.
• Basic understanding of Nadcap Chemical Processing requirements.
• Prior experience in plating shop operations is highly desirable.

Salary: $100,000 - $120,000

Engineering Supervisor

Location: Torrance, CA

Overview

This role supports a high-precision aerospace manufacturing organization known for craftsmanship, quality, and continuous improvement. The Engineering Supervisor works cross-functionally with Manufacturing Engineering, NC Programming, Quality, and Operations to improve processes, integrate new programs, and ensure consistent, compliant production. This leader plays a critical role in mentoring engineers, supporting new product introductions, and resolving manufacturing challenges that impact quality, delivery, and profitability.

The ideal candidate is a hands-on technical leader who thrives in a fast-paced manufacturing environment, values process discipline, and brings a problem-solving mindset to complex production challenges.

Position Responsibilities

• Serve as a key manufacturing engineering representative for new statements of work, new product integration, and process transitions.
• Ensure adherence to internal engineering and manufacturing standards; develop and implement new standards where needed.
• Collaborate with NC Programming, Operations, and Manufacturing Engineering on tooling and fixture design.
• Lead and support first-article and first-piece reviews alongside Quality, Engineering, Operations, and NC Programming.
• Mentor, train, and support the development of Manufacturing Engineers and Planners.
• Interface with customers as needed to resolve engineering or producibility issues.
• Investigate and resolve manufacturing issues related to scrap, rework, or low profitability.
• Support estimating and quoting efforts by reviewing designs for manufacturability and risk.
• Provide shop-floor engineering support during first-article builds and process validation.
• Plan, direct, and coordinate technical activities while monitoring performance against budgets, schedules, and organizational goals.
• Play a strong leadership role in New Product Introduction (NPI) initiatives.
• Perform additional duties as assigned.

Core Functional Areas

Process Standardization

• Develop and maintain work instructions, procedures, and manufacturing standards.
• Recommend and implement process improvements to enhance cost, quality, and delivery.
• Maintain configuration control across customer part revisions and specifications.
• Manage Engineering Work Orders (EWO) and Engineering Change Orders (ECO), including:
• New part integration
• Tooling changes
• Part number and revision control
• Value engineering initiatives

Continuous Improvement

• Identify improvement opportunities and drive corrective actions.
• Analyze manufacturing data to evaluate performance and resolve problems.
• Apply Lean Manufacturing tools and principles where applicable.

Project Management

• Develop and manage project schedules using MS Project or similar tools.
• Track progress, communicate expectations, and manage activities to budget and schedule.

Leadership & Communication

• Provide regular updates to leadership on project status and engineering initiatives.
• Deliver clear, organized, and effective presentations when required.
• Communicate complex or sensitive information professionally and tactfully.
• Foster collaboration across engineering, operations, and support functions.
• Motivate teams, manage conflict, and promote effective cross-functional communication.

About Castelion

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We’re designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts.

Senior Manufacturing Engineer - Mechanisms/Test

Castelion is seeking an expert in the manufacture and design of complex mechanisms for our in-house hypersonic vehicle development. This role will work closely with design engineering and technician teams to build and execute on testing and validation efforts to keep pace with the research and development timetable of our products. You will be apart of a team responsible for serving as a critical node in implementing feedback from testing and validation efforts, streamlining designs and implementing manufacturing changes to quickly mature our products for flight testing and production. Desire for product and process ownership is a must in this role.

Responsibilities

• Work with component design engineering teams to determine the manufacturing and testing feasibility of products
• Operate as a standalone resource responsible for a family of mechanisms
• Architect, mature and develop testing and validation procedures for a wide array of complex mechanisms
• Generate concept proposals in alignment with R&D efforts to help attribute requirements gathering
• Down select solutions generated based on quantifiable vehicle attributes, system cost and weight
• Propose and defend solutions in engineering review meetings
• Develop and refine process documentation including build instructions, test and validation procedures, health and safety standards, and mBOMs
• Create, maintain, and communicate detailed production plans and schedules
• Work closely with supply chain to develop new and existing suppliers as needed
• Design, develop and implement production tooling and equipment
• Participate in design reviews to drive design for manufacturing (DFM)
• Oversee introduction and implementation of new products and manufacturing capabilities
• Analyze and resolve manufacturing issues and non-conformances
• Develop, mentor, and train peers and colleagues

Basic Qualifications

• Bachelor’s degree in mechanical, aerospace, or manufacturing engineering, or other technical degree.
• 5+ years of mechanisms manufacturing, testing and validation experience
• Experience with operations/product line management
• Demonstrated direct or indirect leadership
• Proficiency in CAD/CAM software (NX preferred)
• Experience in selection, procurement, and implementation/validation of manufacturing equipment

Preferred Qualifications

• Experience in mechanisms design, testing and validation from high volume production environments
• Experience developing comprehensive testing and validation procedures and the required documentation processes
• Experience in qualification and acceptance testing of complex aerospace mechanisms
• Working experience with capacity modeling, process mapping, Lean/Six Sigma and value stream mapping
• Experience in transitioning development processes to rate production

Additional Requirements

• Must be willing to work extended hours and/or weekends as needed
• Must be able to travel up to 10%
• All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medial, vision, and dental insurance, and the company offers three weeks of paid time off per year.

Leadership Qualities

Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.

High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion’s mission and consistently look for ways to contribute to the company’s technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.

Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.

ITAR Requirements:

• To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Title: Salesforce Lead Consultant - Sales & Service cloud, LWC

Location: Torrance, CA - Hybrid Must (4 Days to office) - Locals Preferred

Employment Type: Contract-To-Hire/ Fulltime/ Permanent

About Smart IT Frame:

At Smart IT Frame, we connect top talent with leading organizations across the USA. With over a decade of staffing excellence, we specialize in IT, healthcare, and professional roles, empowering both clients and candidates to grow together.

Roles and Responsibilities

Drive the architectural strategy and vision for complex enterprise solutions within the Technical Architecture family Develop and maintain architectural frameworks and governance to ensure consistency across projects Conduct architectural reviews and provide expert guidance to development teams Facilitate communication between stakeholders including business development and operations teams Identify risks and propose mitigation strategies related to architectural decisions Lead innovation initiatives by exploring new architectural styles and patterns Provide leadership in troubleshooting and resolving complex architectural issues Support the professional growth of team members through coaching and knowledge sharing

Mandatory Skills: Architecture Patterns and Styles,Microservices Architecture,Architectural diagrams,SOA and Microservices Based Architecture,Software Engineering and Design Architecture,CI/CD Architecture,Service Oriented Architecture,Architectural Patterns

Experience Level: 8 to 10 years

AppleOne is partnering with an industry leader in custom chemical formulation and manufacturing based in Santa Fe Springs, CA. This organization serves as a critical partner to various industries, delivering high-quality, precision-engineered chemical solutions. Known for a culture of safety and reliability, they provide a dynamic environment where team members are empowered to take full ownership of the customer experience.

We are seeking a Sales Support Specialist for a full-time, onsite role. This position serves as the vital link between customers, Account Managers, vendors, and internal production teams. You will ensure that orders move accurately and efficiently while maintaining high standards of quality and safety. This role is highly suitable for a detail-driven professional who thrives in a fast-paced, evolving atmosphere and is motivated by the direct impact their work has on business success.

• Industry: Chemical Manufacturing / Industrial Solutions
• Job Function: Sales Support / Order Management
• Employment Type: Direct Hire
• Pay Rate: $24.00 – $27.00 per hour (Based on experience and skills)
• Workplace Type: 100% Onsite (Santa Fe Springs, CA)

Core Responsibilities

• Customer Advocacy: Serve as the primary point of contact for customer and Account Manager needs regarding order status and logistics.
• Order Management: Manage the full lifecycle of customer orders within the ERP system, ensuring accuracy from initial entry through final completion.
• Data Integrity: Maintain highly accurate documentation, pricing records, and customer/product profiles to ensure seamless internal transitions.
• Cross-Functional Coordination: Collaborate with vendors and internal departments to resolve issues and align production with customer expectations.
• Process Ownership: Proactively identify and resolve potential order hurdles to maintain customer trust and operational flow.

Required Qualifications

• Experience: 3 to 5 years of experience in sales support, customer service, or order management, preferably within a manufacturing or industrial environment.
• Technical Skills: Very strong proficiency in ERP systems and Microsoft Office Suite.
• Communication: Ability to communicate clearly and professionally with a variety of internal and external stakeholders.
• Adaptability: A strong ability to adjust to shifting priorities and changing customer needs in a high-volume environment.
• Accountability: A track record of taking ownership of outcomes and following through on complex tasks from start to finish.

POSITION DESCRIPTION

This position is responsible for day-to-day compliance of safety programs and related activities at the Vernon, CA facility.

Responsibilities:

• Environmental Compliance Programs:Ensure operations are compliant with applicable federal, state, and local regulations.
• Conduct audits and training programs as needed.
• Establish a working relationship with appropriate regulatory agency personnel.
• Generate reports and permit applications (air, water, waste), ensure compliance with applicable permit requirements.
• Review proposed manufacturing changes and assess environmental impact.
• Work to reduce waste generation and support any remediation activities under the direction of the Corporate HSE Director and Regional HSE Manager.
• Health and Safety Programs:Have oversight of Industrial Hygiene, Fire Prevention LOTO, PPE, etc. Ensure that programs are in place to assist in meeting Company objectives.
• Ensure training programs and in place to ensure compliance.
• Implement accident, near miss, and observation reporting programs to proactively manage safety performance.
• Lead root cause analysis investigation and manage documentation confirm corrective actions have been put in place ensuring complete case management of injuries (reporting, workers compensation, return to work, etc.).
• Build communications required to present incident details and corrective action plans to diffident levels of the business.
• Ensure Job Safety and Environmental Analyses/Job Hazard Analysis are being conducted as required.
• Evaluate operational practices to determine methods to eliminate workplace hazards.

Qualifications:

• Bachelor’s degree in Health & Safety or the Sciences
• Min of 3+ years of Health & Safety experience 2 years in a manufacturing environment.
• Experience with OSHA, LOTO, Root Cause Analysis
• Union experience a plus
• Needs to have occasional flexibility on start time.