Engineering Jobs in La Mesa, CA

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Effector Analog and Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

What You Will Do

• Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
• Architect at the power system level.
• See circuit card and stack development through its design phases, from requirements definition through initial integration testing. Includes leading large teams and defining schedules and system level tasking for designs.
• Guide ECAD drafters and junior engineers through layout and routing activities. Define layer stackup definitions. Act as an expert regarding creepage and clearance.
• Lead large teams to success with schedule, budget, and technical execution.
• Engage in personal technical growth and facilitate technical growth in peers and junior engineers. Drive the capture of opportunities needed to mature the organization on the technical front.

Qualifications You Must Have

• Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and 10 years of prior relevant experience
• Design, analysis, test, and/or simulation experience with linear converters, and familiarity with all the following non-isolated converter topologies: buck, boost, buck-boost.
• Professional design, analysis, and simulation experience with at least one of the following isolated converter topologies: flyback, half-bridge, full-bridge, forward, push-pull, resonant.
• Experience with EMI Filter design, transformer or inductor design, analysis, test, and/or simulation considerations in power electronics circuits.
• Analog electronics design, including the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.

Qualifications We Prefer

• Advanced degree in Electrical Engineering
• Understanding of switching converter control techniques and modes such as voltage mode, peak and average current modes, their advantages and disadvantages. Conceptual familiarity and experience must include stability.
• Experience leading large teams (formally or informally), and experience working with other team leads toward a larger goal.
• Exposure to managing customer relationships.
• Experience communicating and documenting technical topics at the small and large team level and experience presenting to upper levels of management.
• Experience conducting trade studies relating to power electronics architecture at the circuit card stack level.
• Experience guiding drafters through the ECAD process, including the layout and routing concerns specific to non-isolated and isolated power electronics.
• Experience Utilizing and creating electrical design specifications. Should have exposure to requirements definition early in the design cycle.
• Experience designing at the power system level to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
• Experience with Texas Instruments C-2000 family of microcontrollers, Microchip PIC controllers, VHDL, or real time operating systems.
• Experience with using CAN-bus, UART, and/or RS-422.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
• Work Schedule: 9/80 schedule (every other Friday off)
• Relocation Eligibility: This position is eligible for relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

• Tucson, AZ:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Digital Products Configuration Management (DPCM), formerly known as Software Configuration Management (SWCM), department, is hiring Senior Digital Product Configuration Management Engineers. The DPCM department provides innovative solutions through automation, continuous improvement, and a skilled workforce providing support for all digital products.

The term 'Digital Product' (DP) refers to, but is not limited to, the following software types and their associated data and documentation: embedded (tactical) software, applications, Built-in Test (BIT) software, reprogramming tools, simulation software, test equipment, configurable logic, Application-Specific Integrated Circuit (ASIC) design, analytical tools used to formally qualify deliverable artifacts, Model Based Systems Engineering (MBSE) system models or related artifacts, Free Open Source Software (FOSS), and Commercial Off-The-Shelf (COTS) software.

Note This position will be filled onsite at the RTX Facility Tucson, AZ.

What You Will Do

• Perform builds and releases of digital products manually and/or certified pipelines
• Facilitate the Digital Change Review Boards (DCRBs)
• Maintain, control, and administer of the Digital Products Development Library (DDL) (formerly known as Software Digital Library (SDL) tools
• Maintain control, traceability, consistency, and security of all configuration items across the digital development lifecycle
• Perform and maintain configuration planning & identification, change management & version control, status accounting, and configuration audits
• Manage digital product development/media libraries
• Document and maintain guidelines and standards for dependency management, build and versioning
• Provide DPCM Tool administration / management control/access to CM relevant tools/applications (i.e. Microsoft Azure DevOps Server (ADS), Git, Gitlab, Github, Jira, BitBucket, Confluence)
• Administer/manage/use DevSecOps tools like Coverity, Artifactory, Jenkins, Nexus, GitLab CI/CD, Bamboo
• Coordination of data transfers, courier support among various environments
• Lead coordination of various digital product releases and interface with functional and program leadership ensuring on-time delivery and configuration management execution in digital development environment/areas

Qualifications You Must Have

• Typically requires BS/BA Degree in Science, Technology Engineering or Mathematics (STEM) a minimum 5 years of prior engineering experience
• Experience with version control and change management/agile planning tools
• DPCM/DevSecOps technology, Information Technology (IT), and/or development/scripting experience
• Experience with Automation shell scripting in Linux, Unix, and Windows
• Ability to obtain and maintain an interim Secret U.S. security clearance is required on day 1. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Basic knowledge in Digital Product / Software Configuration Management principles, process, and implementation/execution
• Experience with DP/SW CM tools (Microsoft Azure DevOps Server (ADS) - Git, Bitbucket, Jenkins, and/or Artifactory
• Experience with building software / digital products
• Experience with scripting programming languages (i.e., Perl, shell, batch, Python, Ruby, or YAML)
• Experience with Continuous Improvement, Continuous Integration and Continuous Deployment (CI/CD), GitFlow, and Agile concepts

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role
• Onsite Employees who are working in Onsite roles will work onsite. This includes all production and maintenance employees, as they are essential to the development of our products

This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

Location: Tucson, AZ

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.Raytheon is seeking a Senior Electrical Engineer to join our team as an Electrical Computer Aided Designer Engineer (ECAD).

Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today's cutting-edge technology.

This position is an onsite role, located in Tucson, AZ.

What You Will Do:

• Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing
• Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers
• Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation
• Utilize software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB
• Design layouts include Rigid, Flex, and Rigid-Flex assemblies
• Work designs to include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline
• Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind

Qualifications You Must Have:

• Typically requires a Bachelor's in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience to include any combination of the following:
  • Experience with PCB manufacturing or CCA manufacturing principles that affect circuitry and component layout with RF specific layout techniques
  • Experience with the electrical design process including RF layout
  • Experience with laying out Rigid, Flex, or Rigid-Flex boards
  • Experience with multi-layer board design

Qualifications We Prefer:

• Working knowledge of Analog, Digital including DDR, specific experience with RF, Power, and mixed technology, including multi-layer designs with High Density Interconnect (HDI) technology
• Technical PCB design skills using the Siemens design toolset including, but not limited to the Xpedition Layout tool suite with working knowledge of schematic capture, placement, routing, use of the auto-router, constraint manager, and library tools, and use of BluePrint to create complex PCB and CCA drawings, Altium is not used, but transfers over well to the Siemens toolset
• Export manufacturing data in both Gerber and ODB++ formats
• Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software
• Able to understand and interpret drawings as they relate to PCB's and CCA's
• Familiarity with IPC 6012 & IPC 6013
• Working knowledge of military and commercial design standards, GD&T techniques, and overall producibility considerations related to electronic packaging
• Knowledge of RF circuitry and key care abouts when it come to laying out the board along with filter knowledge
• Working knowledge of operating system concepts and implementations, network services as related to Microsoft Windows suites
• Willingness to work extended hours (nights and/or weekends) as required to complete assigned tasking
• Active Secret DoD security clearance

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

gov/m/ds/clearances/c10978.htm

#LI-CV1

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Description

General program information and/or position overview.

Leidos is seeking a skilled and detail-oriented Electronics Technician to contribute to cutting-edge engineering efforts within our Undersea Systems Division (USD). This role is a unique opportunity to drive innovation in underwater vehicle systems, maritime sensors, subsea telemetry, and ISR solutions that support critical defense and national security missions at Naval Information Warfare Center, Pacific (NIWC PAC).

Leidos’ USD is a recognized leader in C4ISR technologies, delivering innovative, mission-critical solutions across sensor networks, unmanned systems, and tactical platforms. We’re known for achieving “industry firsts” in the most challenging maritime domains.

The selected candidate will be part of an elite, top-notch group responsible for the development, manufacture, and testing of electro-mechanical devices for use with Unmanned Vehicles and other undersea systems and maritime mission applications. This individual will work closely with the government engineering team through all project phases. The ideal candidate will perform assembly, installation, testing, and evaluation of precision underwater products as directed by engineering and lead integration personnel. They will also be able to read, interpret, and work with engineering schematics and drawing markups to produce mission-ready equipment.   Tasking may include soldering, circuit board repairs, wire harness construction, mechanical assembly, boat operations/installations, bench testing, cable construction, fiber-optic systems, high-power systems, communication networks, and molding & encapsulation. Handling highly delicate scientific instruments is required. Travel for test events and installations may be required.     

Join us and be part of a world-class team delivering unmatched solutions for today's most pressing maritime missions. 

This position will require the candidate to hold a Secret Clearance.

This position will require the candidate to work a 9/80B schedule (80 hours of work into nine days over a two-week period, allowing for every other Friday off) to align with the NIWC government team.

• Primary Responsibilities.
• Assemble, test, and troubleshoot small, printed circuit boards, adhering to soldering quality standards such as IPC-A-610 or equivalent
• Perform precision silicon molding for components that meet high-performance standards
• Conduct cable terminations with accuracy, ensuring long-term reliability
• Build and test wiring harnesses
• Assemble mechanical hardware (from small board-level items all the way up to large infrastructure-type assemblies)
• Able to troubleshoot and correct electrical and mechanical issues
• Perform in-lab testing
• Manage logistics to include shipping, receiving, and material control
• Stock, pack, and load trailers/containers for out-of-area testing
• Verify system functionality using advanced electronic testing tools, such as soldering stations, multimeters, oscilloscopes, and environmental simulators
• Collaborate with engineers and team members to improve production processes and address technical challenges
• Maintain detailed documentation of work performed and adhere to safety and quality standards
• Apply innovative problem-solving techniques to resolve technical challenges in high-stakes environments
• Requires frequent movement around piers, docks, and facility spaces
• Required to transport or lift objects weighing up to 50 pounds across the facility
• Requires constant use of hands/fingers to operate machinery, tools, or computer equipment
• Requires ability to move about the warehouse, stoop, kneel, or reach for extended periods
• Ability to climb ladders up to 20 ft
• Able and willing to work aboard marine vessels of various sizes, sometimes overnight
• Requires work in various temperatures and inclement weather
• Required work in /or in loud production environments

• Basic Qualifications.
• High school diploma or equivalent; associate degree or certification in electronics or a related field preferred.
• Proficiency in cable and wire termination methods for both wet and dry applications, including various connectors.
• Proficiency in both Through-Hole and Surface-Mount Technologies and assembly practices, with adherence to established standards.
• Ability to assemble printed circuit boards with components as small as 0201 under a microscope.
• Strong skills in using tools such as soldering irons, multimeters, and oscilloscopes.
• Attention to detail and problem-solving capabilities in working with precise electronic components.
• Ability to interpret technical drawings and schematics.
• Excellent communication and teamwork abilities.
• Proven ability to solve problems creatively and effectively, even with constrained resources or incomplete information.
• Must be flexible and responsive to customer needs.
• Must be well-organized and detail-oriented.
• Ability to work on several projects concurrently.
• Familiarity with hand and power tools such as electric drills, saws, landscaping tools, etc.
• US Citizenship.
• Must be able to receive a DoD Secret security clearance if not already active.

• Preferred Qualifications.
• Knowledge of industry standards and quality assurance practices for electronic systems.
• Experience in a manufacturing or laboratory environment, particularly with high-performance systems.
• Familiarity with advanced troubleshooting techniques for small electronic components.

SUBSEAMSS

If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.

For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

About Leidos

Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit and Benefits

Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at Your Data

Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at

If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission.

Commitment to Non-Discrimination

All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Frisella Neilson, APC, an established trust and estates law firm, is seeking to hire an experienced attorney. The attorney will be responsible for ensuring quality representation of clients in cases related to trust and estates disputes.

Duties & Responsibilities:

• Manage a caseload of trust and estates matters from intake to resolution.
• Manage deadlines, ensuring consistent and effective case progression.
• Provide accurate and practical advice to clients in and out of court.
• Conduct comprehensive legal research and analysis to develop effective case strategies.
• Effectively communicate with opposing counsel to negotiate matters and resolve disputes amicably.
• Draft legal briefs, correspondence, pleadings, and other legal documents.
• Draft written discovery and responses to written discovery.
• Meet with clients to review responses to written discovery requests, prepare for depositions, and prepare for trial testimony.
• Prepare for and attend client meetings, depositions, mediations, trials, and hearings.
• Document file in accordance with the Firm policies and procedures.
• Travel to courts in and around the State and handle all aspects of litigation of a case.
• Research and interpret laws and regulations and prepare legal opinions.
• Communicate with clients in a manner that develops and maintains client relationships.
• Attend continuing education classes, webinars, and seminars to remain up to date on changes in the law, rules of court or court procedures.
• Perform other duties as assigned.

Required Qualifications & Experience:

• Juris Doctor (J.D.) degree from an accredited law school.
• Active membership in the California State Bar in good standing.
• Experience in civil or probate litigation.
• Experience in the courtroom, taking depositions, drafting discovery, and drafting a variety of motions.
• Strong legal research and writing skills.
• Ability to use email, search engines, internet, Microsoft Products/Office365 and cloud-based products.
• Experience with tracking, recording, and billing time based on the billable hour.
• Communicate with a kind and friendly tone and demeanor.
• Speak clearly and professionally with others inside and outside the firm.
• Strong written, oral, and interpersonal communication skills.
• Generate accurate, clear, timely legal briefing.
• Ability to manage a caseload.
• Collaborate with team members.

Job Type: Full-time

Salary: Commensurate with experience.

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off

License/Certification:

• Membership in the California State Bar in good standing. (Required)

Veridiam is a strategic manufacturing partner specializing in precision fabrication of components and assemblies made from exotic metals for critical applications in aerospace, defense, medical, nuclear, and space. Our roots were formed in the exacting nuclear and aerospace industries, expanded into medical where we have supplied critical components to a global customer base. 

Veridiam’s ability to work with challenging materials such as titanium alloys, nickel-based superalloys, refractory metals, and specialty stainless steels ensures reliable, mission-ready products for our customers’ most vital programs. As a trusted partner, Veridiam provides technical collaboration, quality assurance, and supply chain reliability essential to advancing innovation and operational success across these highly regulated industries and results for mission-critical parts made from titanium alloys, nickel-based superalloys, refractory metals and more.

At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry.  You will work in a highly regulated, precision manufacturing environment where safety, documentation integrity, dimensional control (“True Diameter”) and traceability are paramount.

Veridiam is looking for a Materials Engineer for our El Cajon facility.

Interested candidates should apply directly to our website at: Careers - Strategic Manufacturing Partner > Veridiam

Position Summary

Extract, research, develop, test, and improve materials used in our products and processes. Perform tests and conduct research on properties, performance and applications of metals including high-performance alloys. Analyze material behavior under various conditions and prepare technical reports.

Essential Duties and Responsibilities

• Perform assigned routine and advanced or complex tests on raw material, product in process, re-worked material, finished goods and/or developmental samples in accordance with customer and/or quality standards/specifications.
• Conduct research on the properties, performance, and applications of metals including high-performance alloys such as stainless steel, titanium, and nickel alloys.
• Develop and test new materials to improve product durability, performance, and efficiency.
• Perform failure analysis and recommend design/material improvements.
• Analyze material behavior under various conditions (stress, temperature, corrosion, wear, etc.).
• Review and manage internal and external material lab test results.
• Develop and maintain processes for new product introduction.
• Prepare technical reports, specifications, and documentation for internal and customer use.
• Prepare, organize, and maintain necessary samples, forms, documentation and trend charts.
• May provide data and analysis to material review board to support resolution of issues, initial data support to supplier and/or customer notification.
• Ensure compliance with industry standards, safety regulations, and environmental requirements.
• Support process optimization and cost-reduction initiatives without compromising quality.
• Work collaboratively with cross-functional teams to ensure materials meet customer requirements and performance, quality and cost objectives.
• Provide and supply training for others in the area.
• Maintain clean and orderly work environment.
• Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with company policies and procedures, goals and objectives, and accepts constructive feedback.
• Other duties as assigned, requested or needed.

Position Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions.

Education and Experience:

• Bachelor’s degree in Materials Science, Materials Engineering, Metallurgy, Chemical Engineering or related field.
• Five (5) or more years’ experience in manufacturing and/or familiarity of the international standards for testing metallic materials (ASTM E8) including steel products (ASTM A370) preferred or equivalent education and experience.

Knowledge, Skills, and Abilities:

• Knowledge of metal forming, and/or machining methods preferred.
• Excellent written and verbal communication skills.
• Ability to read and interpret documents such as work orders, operating and maintenance instructions and procedure manuals and blueprints.
• Ability understand and follow standard operating and safety procedures.
• High-level attention to detail and commitment to quality standards.
• Strong problem-solving skills and technical expertise in materials science.

The above statements are intended to describe, in broad terms, the general functions and responsibility levels assigned to this classification. Management has the right to change duties at any time to meet business needs. 

Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc.

Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. 

Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.  

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in San Diego, California

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $38.01 per hour
  
  
• CDL Class A or B is Required
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 2:00 pm – 10:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

• 
  
• On the Job Paid Training
  
  
• PPE AND UNIFORMS Issued
  
  
• TOOL and BOOT ALLOWANCE provided
  
  
• State of the Art Equipment
  
  
• Safety is Always the First Priority
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 weeks ago (2/20/2026 1:11 PM)

Requisition ID 2

Location (Posting Location) : State/Province CA

Location (Posting Location) : City SAN DIEGO

Location (Posting Location) : Postal Code 92123

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $38.01/Hr.

Max Pay USD $38.01/Hr.

Help us change lives

At Exact Sciences, we're helping change how the world prevents, detects and guides treatment for cancer. We give patients and clinicians the clarity needed to make confident decisions when they matter most. Join our team to find a purpose-driven career, an inclusive culture, and robust benefits to support your life while you're working to help others.

Position Overview

The Lead AI Safety and Enablement Engineer ensures the safe, reliable and scalable use of AI and machine learning across Exact Sciences. This role focuses on developing and implementing systems, tools, and frameworks that embed responsible AI principles into the organization's technology ecosystem. The position combines software engineering expertise with a strong understanding of AI risk management, compliance, and observability.

This role is based in one of our office location. Relocation assistance provided to those not local to the area and willing to relocate.

Essential Duties

Include, but are not limited to, the following:

• Support implementation of enterprise standards for AI safety, transparency, and reliability.
• Develop and maintain shared AI safety tools such as model catalogs, metadata registries, and monitoring systems for bias, drift, and performance.
• Build APIs, templates, and SDKs that integrate governance and validation into AI/ML development pipelines.
• Contribute to the design of observability and telemetry solutions for continuous monitoring of model and data quality.
• Collaborate with Legal, Privacy, Compliance, and InfoSec teams to translate AI policies into automated controls and technical safeguards.
• Work with ML and GenAI teams to embed validation and safety checkpoints in AI workflows.
• Participate in cross-functional reviews and discussions supporting AI governance and responsible AI practices.
• Promote awareness and adoption of responsible AI principles through tools, documentation, and knowledge sharing.
• Support and comply with the company's Quality Management System policies and procedures.
• Uphold company mission and values through accountability, innovation, integrity, quality, and teamwork.
• Maintain regular and reliable attendance.
• Ability to act with an inclusion mindset and model these behaviors for the organization.

Minimum Qualifications

• Bachelor's degree in Computer Science, Software Engineering, Artificial Intelligence, or a related field.
• 8 years of experience in software, ML systems, or platform engineering.
• Practical experience with AI lifecycle tools (e.g., MLflow, Arize, WhyLabs, Label Studio).
• Proficiency in Python, CI/CD processes, and cloud platforms (AWS, Azure, or GCP).
• Experience developing scalable and compliant ML systems and tools.
• Applicants must be currently authorized to work in country where work will be performed on a full or part-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time.

Preferred Qualifications

• Master's degree in Computer Science, Data Engineering, or AI.
• Experience implementing AI assurance, observability, or risk management frameworks.
• Knowledge of GenAI, LLM evaluation, and prompt safety practices.
• Familiarity with FDA, HIPAA, or GxP compliance standards.

Salary Range:

$184,000.00- $276,000.00

Exact Sciences is proud to offer an employee experience that includes paid time off (including days for vacation, holidays, volunteering, and personal time), paid leave for parents and caregivers, a retirement savings plan, wellness support, and health benefits including medical, prescription drug, dental, and vision coverage. Learn more about our benefits.

Our success relies on the experiences and perspectives of a diverse team, and Exact Sciences fosters a culture where all employees can develop personally and professionally with a sense of respect and belonging. If you require an accommodation, please contact us here.

Not ready to apply? Join our Talent Community to stay updated on the latest news and opportunities at Exact Sciences.

We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, protected veteran status, and any other status protected by applicable local, state, or federal law.

To view the Right to Work, E-Verify Employer, and Pay Transparency notices and Federal, Federal Contractor, and State employment law posters, visit our compliance hub. The documents summarize important details of the law and provide key points that you have a right to know.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Agile Hardware Solutions (AHS) strives to develop, mature, and deploy advanced product development capabilities across the Hardware Engineering discipline, enabling the business to deliver high quality work products at competitive discriminating velocity & cost.

The Agile Hardware Solutions (AHS) Department is seeking a Mechanical Dimensional Management Engineer, located in Tucson, AZ (Onsite)

Occasional domestic travel may be expected.

The Mechanical Dimensional Management (DM) Engineer is part of the Producibility Team within Agile Hardware Solutions. The DM Engineer collaborates directly with Mechanical Engineering, Materials & Processes and Design & Drafting from the Mechanical Products Team along with Operations, Quality and Supply Chain peers, and suppliers to implement mechanical producibility improvements on new and emerging programs, and upgrades to existing programs.

The team executes tolerance optimization through primarily 3D tolerance and variation analysis and works with the design team to influence the final design. Early engagement in the conceptual stage and throughout the development process will ensure that our designs are optimized with respect to tolerance controls and methods of manufacture. The DM engineer plays an essential part in reducing product cost and ensuring functional quality.

What You Will Do

As a member of the Dimensional Management and Producibility Team, you may support the team in the following ways:

• Perform detailed 3D complex dimensional tolerance analyses and review 1D tolerance analyses using various tools to evaluate design requirements of new and existing designs to calculate design margin / capability, and provide recommendations while adhering to cost, schedule, and manufacturing constraints.
• Work with product teams to develop coordinated datum flow and document via drawings including interface control drawings (ICDs).
• Apply, encode and decode Geometric Dimensioning and Tolerancing (GD&T) on various technical data packages.
• Contribute to the development and training of the practical application of GD&T, tolerance analysis methods, and tools.
• Where applicable become recognized as the Dimensional Management Lead on a program to coordinate various aspects of the Dimensional Management Closed Loop Process while supporting Critical Item Initiatives.
• Function as a self-starter while exercising considerable latitude in determining the strategic objectives and methods of achieving Dimensional Management goals.
• Where empowered within a program, offer assistance developing inspection plans for both internal inspection and as required by suppliers for compliance with specifications.

Qualifications You Must Have

• Bachelors in Science, Technology, Engineering, or Mathematics (STEM), and 8 years' professional engineering experience
• Experience in the application of GD&T principles (ASME Y14.5)
• Experience with CAD modeling (CREO preferred)
• Experience with commercial tolerance analysis tools (Siemens visVSA preferred)

Qualifications We Prefer

• Demonstrated working knowledge of statistical tolerancing methods (e.g., Monte Carlo simulations, RSS, MRSS, etc.)
• Working knowledge of fabrication processes, producibility enhancements, and inspection and validation methods
• Working knowledge of inspection planning, inspection methods and dimensional data analysis
• ASME Certified GD&T Professional (GDTP per ASME Y14.5.2) or equivalent5 ASME standard (e.g.Y14.5) committee membership or similar involvement
• Expertise in various Inspection and Validation methods and tools, including gages & Coordinate Measuring Machines (CMMs)

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA, an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms