Engineering Jobs in Irving Texas Remote

• 
  
• Coaxial cables (many different size and connectors, flex and solid center conductors)
  
• Industrial automation connectors (panel connectors and ferrules, drive connectors, motor connectors, cutting and terminating equipment)
  
• MS connectors (all kinds of variations and sealing operations)
  
• Commercial electronics connectors (mini and micro fit on medium speed termination equipment)
  
• Hi flex cable assemblies (WL Gore / LEONI cores and PTFE sleeves with heat-shrink and special clamps)
  

• 
  
• Fabricates and tests cable assemblies following blueprints specifications, using measuring instruments, hand tools, and machines.
  
• Reads and interprets blueprints, work orders and specifications to define sequence of operations, type & size of cable fittings required, quantity and finished dimensions.
  
• Measures & cuts cable to required length, considering cable stretch metal flow resulting from swaging operations, using cable cutter or saw.
  
• Selects installs dies, jigs, shims, or other accessories in swaging machine, using hand tools.
  
• Assembles fittings onto cable in specified location.
  
• Positions fitting cable between dies of swaging machine and depresses pedal to activate machine that swages fittings onto cable, turning cable assembly by hand as fitting is swaged onto cable.
  
• Verifies dimensions of cable assembly position of fittings, using measuring instruments.
  
• Tests holding capacity of cable assembly, using proof loading machines.
  
• Repairs reworks cable assemblies as required.
  
• May form loops or splices in cables, using clamps fittings, or by reweaving cable strands.
  
• May apply lubricants protective coatings to cable assemblies.
  
• May operate crimping machine.
  
• May mark identifying information on cable assemblies.
  
• May fabricate cable templates.
  
• Performs all work in accordance with established safety procedures.
  
• Maintain shop disciplines (housekeeping, clean as you go and 5S)
  
• Work from assembly drawings, 3-D models, and other general documentation to carry out assembly procedures.
  
• Perform basic assembly operations to exacting tolerances
  
• Use precise measuring instruments
  
• correct dimensional tolerance and check finishing specifications.
  
• Detect defective parts, unusual conditions or operating difficulties and report to proper supervision.
  
• Complete necessary documentation to ensure quality and production requirements.
  
• Be an active participant in team meetings to communicate and help resolve any cost, quality, or production issues.
  
• Assist engineering with R&D.
  

• 
  
• Must have problem solving abilities.
  
• Must be able to read blueprints and interpret complicated specifications.
  
• Must have extensive understanding of complex mechanical assembly, cable assembly and module assembly.
  
• Understand and operate various hand and power tools involved in assembly and cable making.
  
• Willingness to assist assembly team with other duties as required.
  
• Possess good communication and interpersonal skills; be able to independently solve problems while interacting with various teams and teammates on daily processes and flow.
  
• Must be capable of multi-tasking various duties throughout the day, have a positive attitude with an ability to be versatile and flexible.
  
• Continuous mental and visual attention is necessary to perform various duties requiring constant alertness and activity.
  
• High school diploma or GED.
  
• Typically requires 1+ years wiring experience
  
• Must be a U.S. Citizen
  

Production / Materials Coordinator | Manufacturing Environment

We are seeking a detail-oriented professional who thrives in a fast-paced manufacturing setting and understands how critical materials flow is to production success.

In this role, you will monitor raw materials, components, and finished goods to ensure production stays on schedule, inventory remains accurate, and operations run efficiently. You’ll work closely with procurement, engineering, logistics, and production teams to solve issues before they impact output.

What we’re looking for:

Manufacturing or production experience highly preferred

Strong analytical and problem-solving ability

Excellent communication and coordination skills

Ability to manage priorities in a deadline-driven environment

This is an excellent opportunity for someone who enjoys being at the center of operations and making a direct impact on production performance.

Confidential conversations welcome. Send resumes directly to

Job Description:

Principal Azure Engineer, Platform & Delivery:

The Principal Azure Engineer, Platform & Delivery is a senior technical leader responsible for designing, building, and delivering enterprise-scale Microsoft Azure solutions. This role combines deep hands-on Azure engineering expertise with ownership of delivery outcomes, often serving as the technical lead for initiatives without dedicated project management. The ideal candidate can translate complex or ambiguous business needs into secure, scalable Azure solutions and ensure they are executed predictably and effectively.

Required Qualifications:

• Deep technical experience designing and operating high-availability, scalable infrastructure including networking, storage, virtualization, and identity.
• Developing and maintaining automated deployment modules using tools like Terraform or ARM templates.
• Optimizing delivery pipelines (e.g., Azure DevOps, GitHub Actions) to ensure repeatable, secure platform services.
• Proven experience implementing enterprise Azure networking architectures.
• Experience migrating and modernizing workloads from on-premises environments to Azure.
• Implementing governance frameworks, RBAC, and security baselines using Microsoft Defender for Cloud and Azure Policy.
• Demonstrated ability to lead engineers and influence stakeholders without formal authority.
• Experience defining and implementing monitoring and observability solutions.
• Lead end-to-end delivery of multiple concurrent Azure initiatives from intake and design through implementation and operational handoff.
• Act as the technical project lead for Azure initiatives where no formal project manager is assigned.
• Maintain visibility into all in-flight Azure work and provide regular status updates, risk reporting, and summaries.
• Coordinate work across infrastructure, security, networking, application, and vendor teams.
• Proactively identify delivery risks and blockers and drive resolution to keep initiatives moving forward.
• Balance speed, cost, risk, and compliance when making technical and delivery tradeoff decisions.
• Mentor and guide engineers, establishing technical standards, patterns, and best practices.
• Produce high-quality technical documentation, architectural artifacts, and operational runbooks.
• Foster strong partnerships with application teams to enable successful Azure adoption.

Additional Skills and Experience:

• Deep proficiency in Azure compute (VMs, AKS), storage, networking (VNETs, NSGs), and identity (Microsoft Entra ID).
• Experience operating in regulated environments such as healthcare, financial services, or higher education, including frameworks like HIPAA, HITRUST, SOC 2, or GDPR.
• Working knowledge of IT service management concepts.
• Experience with Azure Cost Management and FinOps practices.
• Strong problem investigation, root cause analysis, and decision-making skills.

Education and Experience:

• Bachelor’s degree or equivalent experience.
• Minimum of 10 years of professional IT experience, with at least 5 years in a senior, architect-level, or principal cloud engineering role.
• Demonstrated experience leading enterprise-scale Azure initiatives with multiple parallel workstreams.

Job Summary:

Our client is seeking a Senior Data Analytics Engineer (Customer Data) to join their team! This position is located in Irving, Texas.

Duties:

• Support cross-functional teams including Marketing, Data Science, Product, and Digital
• Build datasets that power: customer segmentation, personalization workflows, campaign and lifecycle analytics, BI dashboards and KPIs and real-time and ML-driven customer experiences
• Build, optimize, and maintain customer data pipelines using PySpark/Databricks
• Transform raw customer data into analytics‑ready datasets for reporting, segmentation, personalization, and AI/ML applications
• Develop customer behavior metrics, campaign insights, and lifecycle reporting layers
• Design datasets used by Power BI/Tableau; dashboard creation is a plus, not required
• Optimize Databricks performance such as: skewed joins, partitioning, sorting, caching/persist strategy
• Work across AWS/Azure/GCP and integrate pipelines with CDPs
• Participate in ingestion and digestion phases to shape MarTech and BI analytical layers
• Document and uphold data engineering standards, governance, and best practices across teams

Desired Skills/Experience:

• 6+ years in Data Engineering or Analytics Engineering
• Strong hands-on experience with: Databricks, PySpark, Python and SQL
• Proven experience with customer/marketing data: segmentation, personalization, campaign analytics, retention, behavioral metrics
• Ability to design performance‑optimized pipelines; batch or near real-time
• Experience building datasets consumed by Power BI/Tableau
• Understanding of CDP workflows, customer identity data, traits/feature modeling, and activation
• Strong communication skills, translating marketing needs into technical data solutions
• Power BI expertise, major plus
• Experience with Delta Lake, orchestration, or feature engineering for ML
• Background as an Analytics Engineer, BI/Data Modeling Engineer, or Data Engineer with strong analytics orientation

Benefits:

• Medical, Dental, & Vision Insurance Plans
• Employee-Owned Profit Sharing (ESOP)
• 401K offered

The approximate pay range for this position starting at $140,000. Please note that the pay range provided is a good faith estimate. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and location. We comply with local wage minimums.

At KellyMitchell, our culture is world class. We’re movers and shakers! We don’t mind a bit of friendly competition, and we reward hard work with unlimited potential for growth. This is an exciting opportunity to join a company known for innovative solutions and unsurpassed customer service. We're passionate about helping companies solve their biggest IT staffing & project solutions challenges. As an employee-owned, women-led organization serving Fortune 500 companies nationwide, we deliver expert service at a moment's notice.

By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from KellyMitchell and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

• 401(k) with Generous Match
• Comprehensive Benefits: Medical, Dental, Vision, Life Insurance
• Generous PTO & Paid Holidays
• Collaborative Work Environment: Join a skilled team in a fast-paced manufacturing environment
• Growth Opportunity: Develop into a team authority on inspection standards and best practices
• High-impact Role: Directly contribute to quality outcomes in a mission-critical industry

• High school diploma or equivalent; technical training or coursework in manufacturing/QA preferred
• Knowledge of CMM Manager a plus
• Minimum 5 years of experience in precision inspection roles
• Experience using MCOSMOS; QVPAK and MeasureLink strongly preferred
• Proficient in interpreting GD&T and engineering-level drawings
• Skilled with precision measuring instruments: calipers, micrometers, thread gauges, etc.
• Strong documentation and report-writing skills
• Comfortable using Microsoft Office software
• Able to lift and carry up to 25 lbs repetitively

• Perform First Article Inspections and create FAIR reports
• Handle complex and critical part inspections using CMM and precision manual tools
• Identify and document quality issues and nonconformities
• Provide guidance to junior inspectors and help develop their technical inspection capabilities
• Collaborate with engineering on inspection-related input for traveler creation
• Assist other departments as needed to ensure workflow continuity

• Employee Well-Being: Named one of the Healthiest 100 Workplaces in America, with programs focused on holistic wellness.
• Innovation-Driven: Actively redefines energy and infrastructure solutions through cutting-edge technologies and integrated delivery models.
• Growth-Oriented: Offers opportunities to work on impactful projects across commercial and industrial sectors.
• Supportive Culture: Encourages mentorship, collaboration, and continuous learning.

• Maintain current electrical licensing and required training.
• Interpret and apply blueprints and technical drawings on the jobsite.
• Install, maintain, and troubleshoot basic electrical systems in compliance with the National Electric Code (NEC).
• Layout and install conduit systems, lighting systems, control systems, and motor feeders.
• Perform standard motor connections and ensure proper system functionality.
• Participate in safety meetings, audits, and toolbox talks.
• Provide technical support and mentorship to apprentices and helpers.
• Complete documentation such as time cards, evaluations, and logs accurately and on time.
• Maintain tools, vehicles, and jobsite cleanliness.
• Identify and report unsafe conditions or incidents promptly.
• Collaborate with internal teams and support project execution using available company resources.
• Uphold safety and compliance standards in accordance with OSHA and customer-specific requirements.
• Contribute to employee development and referral programs.
• Perform other duties as assigned.

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 days ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

MSI Express is a single-source contract manufacturing and packaging company, delivering innovative engineering solutions from our strategically located network of manufacturing facilities.

ROLE PURPOSE/ POSITION SUMMARY

The Plant Manager is accountable for overseeing the daily operations of the food manufacturing facility, including production, quality assurance, maintenance, sanitation, safety, and supply chain. This role ensures adherence to food safety standards and regulatory requirements (e.g., HACCP, GMP, FDA, USDA) while delivering against production goals and cost targets. The Plant Manager will lead cross-functional teams to continuously improve processes, reduce waste, enhance productivity, and ensure timely delivery of products to customers. In addition, this position plays a key role in shaping plant culture, driving employee engagement, and fostering a safe workplace. Collaboration with the executive leadership team and corporate support teams is essential to ensure alignment with broader business objectives.

KEY ACCOUNTABILITIES/PRIMARY DUTIES & RESPONSIBILITIES

Key Accountabilities

Food Safety & Regulatory Compliance:

Ensure full compliance with all food safety standards (HACCP, GMP, SQF, BRC) and regulatory requirements from agencies such as the FDA, USDA, and local health departments.

Operational Excellence:

Oversee daily plant operations to ensure consistent, efficient, and high-quality production that meets customer demand and company standards.

Quality Assurance:

Maintain rigorous quality control procedures to ensure that all products meet internal specifications and external customer and regulatory expectations.

Health & Workplace Safety:

Lead a safety-first culture by maintaining a clean, organized, and hazard-free work environment. Ensure compliance with OSHA and company safety policies.

Supply Chain & Inventory Management:

Manage raw materials, packaging, and finished goods flow to ensure timely production and delivery while minimizing waste and spoilage.

Financial Performance:

Deliver against plant financial objectives by managing budgets, controlling costs, optimizing labor and materials, and improving operational efficiencies.

Leadership & Team Development:

Lead, coach, and develop the plant team to foster engagement, accountability, and a continuous improvement mindset.

Primary Duties and Responsibilities

• Lead all plant operations, including production, maintenance, quality assurance, sanitation, warehousing, and logistics.
• Ensure strict adherence to all food safety programs, conducting internal audits and leading external inspections as needed.
• Oversee daily production schedules, ensuring customer orders are fulfilled accurately and on time.
• Collaborate with customers, quality, procurement, and supply chain teams to support new product launches, reformulations, and special runs.
• Monitor KPIs (e.g., reliability, yield, downtime, complaints, waste) and implement action plans for continuous improvement.
• Coordinate with procurement and planning to manage raw material inventory, minimize shortages or overstock, and optimize warehouse space.
• Ensure all sanitation and cleaning protocols are executed according to schedule and verified for compliance.
• Champion a proactive safety culture by conducting regular safety audits, training, and incident investigations.
• Develop and manage plant operating budgets, capital projects, and cost-reduction initiatives.
• Foster a positive and productive working environment through regular communication, performance reviews, and employee development.
• Lead crisis management efforts for food recalls, contamination risks, or emergency shutdowns.
• Report on plant performance to senior leadership and recommend operational strategies.

QUALIFICATIONS/ CAPABILITY PROFILE

Minimum Education

• Bachelor’s degree in Food Science, Engineering, Industrial Management, Business Administration, or a related field.
• Master’s degree (MBA or related field) may be considered an asset, especially for larger or more complex operations.

Minimum Experience

• 8+ years of progressive leadership experience in food manufacturing or a closely related industry.
• 5+ years of direct experience in plant operations management, including oversight of production, quality, safety, and supply chain functions.
• Proven track record of managing in a regulated food production environment, with demonstrated understanding of HACCP, GMP, SQF, and FDA/USDA regulations.
• Experience leading and developing cross-functional teams in a high-speed, high-volume manufacturing setting.
• Demonstrated success in implementing continuous improvement initiatives (e.g., Lean, Six Sigma) with measurable operational and financial impact.
• Strong background in budget management, cost control, and performance metrics.
• Experience working with ERP and manufacturing systems, preferably in a food manufacturing context (e.g., SAP, Oracle, or industry-specific platforms).
• Experience with customer audits, third-party certifications, and government inspections is highly desirable.

Minimum Knowledge/ Skills/ Abilities Knowledge

• Deep understanding of food manufacturing processes, including food safety, sanitation, and hygiene standards (e.g., HACCP, GMP, SQF).
• Strong knowledge of regulatory requirements from agencies such as FDA, USDA.
• Familiarity with allergen control, traceability, and recall procedures.
• Understanding of production scheduling, raw material management, and perishability factors unique to food operations.
• Knowledge of quality assurance systems and compliance protocols in a food production environment.
• Experience with food-specific ERP systems and supply chain logistics in temperature- or shelf-life-sensitive environments.
• Financial acumen related to plant operations, including waste control, yield optimization, and production cost analysis.

Skills:

• Excellent leadership skills with experience managing diverse teams in a food production environment.
• Strong problem-solving skills with the ability to address quality, process, and supply chain challenges in real time.
• Clear and effective communication skills with the ability to lead cross-functional teams and interact with auditors and inspectors.
• High attention to detail, especially in areas involving food safety, labeling, and quality standards.
• Proficient in lean manufacturing and continuous improvement tools (e.g., Kaizen, 5S, root cause analysis) tailored for food manufacturing.
• Skilled in risk assessment and mitigation related to food safety and operational reliability.

Abilities:

• Ability to enforce and promote a strong food safety and safety-first culture at all levels of the plant.
• Ability to work under tight deadlines while maintaining product quality and compliance.
• Ability to interpret production and quality data to drive operational decisions.
• Ability to adapt to changing demand, seasonal production swings, or ingredient availability challenges.
• Ability to respond swiftly and effectively to audits, inspections, or food safety incidents.
• Ability to implement and sustain continuous improvement initiatives in a highly regulated environment.

Apply today and join our rapidly growing team!

- Inc. 5000 #124 fastest growing company in the Midwest. (2025)

- Inc. 5000 #10 fastest growing company in the Midwest. (2022)

- Inc. 5000 #165 fastest growing company in the Midwest. (2021)

- Inc. 5000 #1,085 fastest growing company in the USA. (2023)

- Inc. 5000 #622 fastest growing company in the USA. (2022)

- Inc. 5000 #479 fastest growing company in the USA. (2021)

Intepros is in need of several talented Job Captains for our valued client!! These roles sit in Grapevine, TX...

What is the opportunity?

Capable of managing both internal and external teams and projects to successful completion by meeting project schedules, budget and quality standards. Strong collaborator with other stacks to provide informed decision‐ making throughout the greater organization. Opportunities to stretch skills may be provided by working on special professional or division specific assignments

What are the primary responsibilities?

Collaboration

• Regular collaboration with counterparts in other groups (such as Design and Engineering,)
• Managing multiple project teams/ outside consultants
• Assist Design Team in creation/evaluation of design initiatives including new options, styles and details
• Assist Architectural Operations team with new technology projects discovery and design phases
• Lead, engage and interact with all team members by sharing experiences, issues, resolutions, and best practices
• Provide opportunities for continuous improvement by asking questions, identifying roadblocks and providing suggestions to managers

Project Management/Quality Control

· Responsible for meeting project deadlines, budget and quality standards. Projects include new construction documents, lot specifics, and revisions

· Ability to manage multiple projects simultaneously

· Ability to read and understand construction codes

· Ability to identify, collect and interpret relevant information needed for the project

· Collaborate with other project stakeholders

· Adhere to project workflow criteria

· Follow established standards and development procedures

· Ability to exercise independent judgment

· Data management

Leadership

· Opportunities for limited business analysis to help senior leadership in decision‐making

· Assist in creation and governance of standards and procedures

· All other duties as assigned

The client is committed to ensuring equal employment opportunities. All employment decisions, policies, and practices are in accordance with applicable federal, state, and local anti-discrimination laws. The client will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person's sex (including pregnancy), age, race, color, religion, national origin, ancestry, citizenship, physical or mental disability, sexual orientation, gender nonconformity, status as a transgender or transsexual individual, gender identity, genetic information, marital status, family responsibility, armed services, or any other status protected by law.

Does this describe you?

• Ability to manage cross-functional teams and multi-disciplinary projects

• Able to plan and prioritize while focusing on detail orientation and effective time management

• When speaking and writing, uses appropriate grammar, organizes ideas clearly, and articulates ideas

concisely

• Able to work with employees among multiple departments

• Able to use imagination and new ideas to produce solutions for the department

• Identifies way to incorporate new practices and ideas into existing framework

Do you have these qualifications?

Essential:

· Min. Required Education – Associate Degree or equivalent vocational/technical certification

· Required Software – AutoCAD, Excel, Word

· Architectural and construction knowledge required

· Project and People Management experience required

· Ability to influence/collaborate with others including internal resources, consultants and remote teams.

· 5+ years previous related experience and a minimum of 2+ years of people or project management

· experience

· Valid driver’s license

·

Preferred:

· Preferred Education – Bachelor of Architecture

· Additional Preferred (but not required) Software – SketchUp, BIM360

· Residential experience preferred

· Ability to influence/collaborate with others including internal resources, consultants, and remote teams

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms