Engineering Jobs in Geneva Il Wfh

Controls Engineer – Automation & Robotics (6 Openings)

Location: Elgin, IL (On-site)

Job Type: Direct Hire | Full-Time

Compensation: $95,000 – $150,000 (up to $160,000 for exceptional experience)

Benefits: Comprehensive benefits starting Day 1 (medical, dental, vision, 401k, stock programs, PTO, holidays)

About the Role

We are expanding our Automation Development team and are seeking Controls Engineers to support the design and build of highly advanced, custom automation and robotic equipment for autonomous vehicle production. This is a hands-on role focused on conceptual, in-house engineered systems—not repetitive builds or catalog automation.

Engineers in this group own projects end-to-end, from early concept and proof-of-principle through programming, debug, factory acceptance testing, and on-site integration. The current flagship project supports a next-generation autonomous vehicle platform, with the first production units already shipped.

This role is ideal for Controls Engineers coming from systems integrators or custom machine builders who enjoy variety, ownership, and technically challenging work.

Key Responsibilities

• Design, program, and debug PLC, HMI/SCADA, robotics, servo, and machine vision systems
• Develop control architectures for custom automation and robotic equipment
• Review electrical schematics and contribute to hardware and network architecture
• Perform system bring-up, debugging, validation, and factory acceptance testing
• Collaborate closely with mechanical engineers, assembly teams, and manufacturing
• Support equipment installation and integration at U.S. manufacturing facilities

Travel

• Typical travel averages 10–25% (historically fluctuates by project)
• Travel is limited to 4 U.S. manufacturing locations (California, Texas, Nevada)

Qualifications

• Experience in custom automation, robotics, or systems integration
• PLC programming experience ( Siemens preferred, Rockwell/Allen-Bradley also acceptable )
• Engineers proficient in Rockwell who are open to transitioning to Siemens are strongly encouraged to apply
• Experience with HMI/SCADA platforms (WinCC, Ignition, FactoryTalk, or similar)
• Bachelor’s degree in Electrical Engineering, Controls, Mechatronics, Automation, or related field (or equivalent experience)

Why This Opportunity Stands Out

• Work on fully conceptual, in-house designs with protected intellectual property
• Exposure to cutting-edge autonomous vehicle and robotics technology
• Projects that most automation houses and integrators never get access to
• Strong compensation, Day-1 benefits, and long-term growth potential
• Collaborative engineering culture with high technical standards and visibility

Outside Sales Representative – West Chicago, IL

Team360 Staffing

About the job

A leading manufacturer in the refrigeration components industry is seeking a Sales Manager to drive growth in refrigeration component sales across multiple markets. This important hands-on role involves developing and managing key client relationships and expanding sales of energy-saving refrigerant components.

The ideal candidate will work closely with customers to understand their refrigerant management needs and recommend appropriate technical solutions.

If you care about the environment and want to make a meaningful impact while contributing to the success of a growing organization, this is a great opportunity to do so.

Job Type: Full-time

Pay: $75,000.00 - $125,000.00 per year

Work Location: In person

Responsibilities

• Develop and execute sales strategies to expand market share and achieve sales goals.
• Coordinate projects with internal technical and engineering teams.
• Identify new business opportunities through lead generation, cold calling, and networking within target industries.
• Manage and visit key accounts to ensure customer satisfaction and retention.
• Conduct technical sales presentations and perform cost-savings calculations for clients.
• Utilize CRM software such as Salesforce to track sales activities, forecast performance, and analyze market trends.
• Negotiate contracts and pricing agreements with clients to secure profitable deals while maintaining strong customer relationships.
• Develop and maintain sales forecasts for key clients.

Requirements

• 10+ years of proven experience in inside and outside sales in the refrigeration industry with a track record of meeting or exceeding targets.
• Strong management skills with previous experience leading a sales team or managing territories.
• Experience in business development including cold calling, direct sales, and territory expansion is a plus.
• Proficiency with CRM software such as Salesforce or similar platforms.
• Excellent negotiation skills combined with strong customer service orientation to build long-term client relationships.
• Ability to analyze market data to identify opportunities for upselling and product demonstrations that drive revenue growth.
• Knowledge of retail sales environments or inside/outside sales channels is advantageous.
• Strong communication skills with the ability to deliver compelling presentations and lead negotiations effectively.
• Familiarity with marketing strategies that support lead generation efforts within B2B markets.

Benefits

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Tuition reimbursement
• Vision insurance
• Join a company committed to designing and manufacturing components that support environmental sustainability while contributing to the future of the refrigeration industry.

As a world leader in sensing and control technology, Nidec Mobility controls the most discrete functions within an automobile – from seat switches, power window switches, and instrument panel controls, towards complex user interfaces. NMOA is directly involved with automotive OEM’s and holds a leadership position within Nidec for product development with global vehicle makers.

The Test Systems Technician is responsible for hands on assembly, wiring, integration, and validation of automated test equipment and custom test systems. This role requires strong practical electrical and mechanical skills, the ability to read and interpret electrical schematics, and experience building complex tester platforms from concept through deployment.

Key Responsibilities

• Assemble automated test systems, electrical panels, and custom tester platforms from engineering drawings and schematics

• Perform point to point wiring of control panels, power distribution systems, instrumentation, and data acquisition hardware

• Route and terminate cables including power, signal, communication, and high voltage wiring

• Read, interpret, and troubleshoot using electrical schematics, wiring diagrams, and layout drawings

• Integrate hardware components such as power supplies, PLCs, relays, breakers, DAQ systems, and network equipment

• Perform continuity checks, insulation resistance testing, and basic electrical verification

• Support system bring up, debugging, and validation alongside engineering teams

• Identify wiring errors, component mismatches, and layout improvements during assembly

• Maintain accurate build documentation and redline drawings as required

• Follow all electrical safety standards and company procedures

Please directly apply or email resume to

NO SOLICITING FROM RECRUITERS

LHH Recruitment Solutions has partnered with a growing organization, and they are seeking a motivated Technical Product & Quoting Engineer – CNC Environment to join their team. This is a pivotal, hands-on role that blends CNC manufacturing expertise, RFQ/quoting ownership, and product engineering leadership. The ideal candidate brings strong experience supporting CNC-machined components from RFQ through production, collaborating closely with engineering, operations, and suppliers. This role supports a diverse customer base across industries including aerospace, pipe fittings, hydraulics, and hose assemblies.

Key Responsibilities:

• Own and develop accurate, competitive CNC RFQs and production quotes for complex machined components and assemblies.
• Analyze customer drawings, specifications, and RFQs to determine manufacturing feasibility, machining strategy, and cost drivers.
• Translate customer requirements into manufacturable CNC solutions, considering tolerances, materials, cycle times, and production methods.
• Collaborate with engineering, CNC programmers, machinists, and production teams to optimize designs for manufacturability, quality, and cost.
• Support CNC production planning by validating routings, estimating run times, tooling needs, and labor requirements.
• Lead product definition, requirements gathering, and business case development for new and existing products.
• Coordinate prototype builds, first articles, testing, and validation to support customer and internal approvals.
• Partner with sourcing and supply chain teams to support supplier evaluation, CNC sourcing decisions, and cost‑reduction initiatives.
• Monitor product performance, quality metrics, and production feedback, driving continuous improvement initiatives.
• Provide technical guidance and training to internal teams and external partners related to CNC processes and quoting assumptions.
• Track and report key performance indicators including revenue, margin, quoting accuracy, and customer satisfaction.

Qualifications and Skills:

• Bachelor’s Degree in Mechanical, Manufacturing, Industrial Engineering, or related field.
• Significant hands-on experience in a CNC machine shop environment.
• Proven experience with CNC RFQs, CNC quoting, and supporting CNC production in a precision manufacturing environment.
• Strong understanding of CNC machining processes (turning, milling, multi-axis preferred), materials, tolerances, and GD&T/blueprint reading.
• Demonstrated experience estimating cycle times, labor, tooling, and overhead for CNC-machined components.
• Experience working closely with CNC programmers, machinists, and production teams.
• Proficiency with CAD/CAM software and experience navigating ERP/MRP systems.
• Industry experience in aerospace, pipe fittings, hydraulics, hoses, or similar precision manufacturing sectors.
• Strong problem-solving skills, assertiveness, and a collaborative, team-oriented mindset.
• Excellent communication skills with the ability to explain technical and cost concepts to both technical and non-technical stakeholders.
• Familiarity with Lean Manufacturing, Six Sigma, or continuous improvement methodologies is a plus.

Compensation Range: $115,000-$135,000 + 15% Bonus

Benefits Offered: 2 weeks of vacation, paid sick leave where applicable by state law, Medical Insurance, Dental Insurance Vision Insurance, 401K, and Life Insurance.

If you are a passionate Technical Product & Quoting Engineer looking for anew and rewarding career, please apply today! You don’t want to miss out on this opportunity!

LHH is a leader in permanent recruitment—and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn’t a perfect match.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit

MSI Express is a single-source contract manufacturing and packaging company, delivering innovative engineering solutions from our strategically located network of manufacturing facilities.

ROLE PURPOSE/ POSITION SUMMARY:

Manages activities of all production personnel across an entire shift within a manufacturing facility. Monitors activities to maximize productivity, minimize cost, and maintain quality in all facets of the facility operations. Ensures associates comply with company policies, procedures, and guidelines to maintain safe, efficient operations within a positive working environment. Performs shift administrative tasks, including metric reporting and personnel actions.

KEY ACCOUNTABILITIES/PRIMARY DUTIES & RESPONSIBILITIES:

• Manage SQF, Food Safety, Food Quality, Sanitation, 6S and customer standards
• Provides daily direction to Supervisors and hourly associates to meet designated productivity metrics, including labor costs/utilization, operational efficiency, scrap loss rates, and other measures to optimize profitability and meet demand. Develops and implements action plans to address production performance concerns or improve operations
• Coordinates production/facility activities with Shift Managers as appropriate
• Ensures administrative activities for the shift are being completed timely and accurately. These include but are not limited to payroll, performance reviews, standard and ad hoc production reporting, disciplinary actions, etc.
• Ensures announcements, safety topics, policies, procedures, and expectations are communicated to the staff and executed where appropriate
• Create and/or assists in the development and execution of plant budgets, goals, standards, EOS action items and career development plans
• Understand job standards and/or machine operation for each function
• Follow up on associate orientation, on-boarding, training, new hire performance reviews, and/or development as appropriate
• Ensures associates have appropriate tools to perform assigned duties and that tools/equipment are routinely inspected and maintained
• Performs other duties as assigned

PEOPLE MANAGEMENT RESPONSIBILITIES:

• Recruitment and Selection: determine labor needs; understand and use the Company’s interviewing process and tools; participate in the on boarding process (Passport orientation, etc.)
• Managing & Rewarding Performance: set clear performance expectations (Passport, Performance Management Process); provide regular feedback; resolve team conflicts; encourage a positive and safe environment; use coaching and corrective action for underperformance; understand and use voluntary/involuntary termination processes
• Training & Development: understand and coach others on processes, tools and standards (SOP’s); ensure training requirements are met; identify and address skill gaps; discuss career interests and developmental plans/next steps. Create appropriate action plans for individual development
• Communication & Engagement: communicate site, company, and other pertinent information to team (pre-shift, one on one, etc.); share customer and MSI Express Inc information on regular basis

QUALIFICATIONS/ CAPABILITY PROFILE:

Minimum Education

High school diploma and/or GED- Essential

Bachelor’s degree in related field- Desirable

Minimum Experience

Three to five (3-5) years of experience in a manufacturing environment, with particular preference for food manufacturing and/or packaging experience- Essential

Some experience interacting with the company customers- Desirable

One to three (1-3) years of experience in a lead or supervisory role- Essential

Minimum Knowledge/ Skills/ Abilities

Strong leadership skills- Essential

Decision making skills- Essential

Ability to analyze and/or solve problems- Essential

Strong verbal, written, and interpersonal communication skills- Essential

Ability to plan work schedules- Essential

Working knowledge of food manufacturing processes, good manufacturing practices (GMPs) and related concepts- Essential

MSI Express is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Apply today and join our rapidly growing team!

- Inc. 5000 #124 fastest growing company in the Midwest. (2025)

- Inc. 5000 #10 fastest growing company in the Midwest. (2022)

- Inc. 5000 #165 fastest growing company in the Midwest. (2021)

- Inc. 5000 #1,085 fastest growing company in the USA. (2023)

- Inc. 5000 #622 fastest growing company in the USA. (2022)

- Inc. 5000 #479 fastest growing company in the USA. (2021)

Position: Mastercam CNC Programmer / Machinist

Hourly Pay: $32–$35/hr

Location: Batavia, IL

Job Description

Essential Duties and Responsibilities

• Set up, program, and operate CNC turning machines, including Haas Turn Mill and Mazak lathes.
• Program lathes using drawings and job travelers to produce designated parts.
• Operate the Star Clip machine and perform secondary operations such as deburring, grinding, drilling, and tapping.
• Inspect parts for quality, take measurements, detect production flaws, and adjust or reprogram controls.
• Communicate effectively with Machinist Level III and Engineering regarding concerns or job changes.
• Recommend or approve supplies and materials necessary for lathe jobs.
• Serve as backup to the Machinist Level I to maintain workflow through the department.
• Assist with general facility operations, including equipment loading/unloading and inventory management.
• Maintain a safe work environment by following established safety procedures and regulations.
• Stay current with job knowledge through training and educational opportunities, including conversational programming and TMA classes.
• Keep work areas organized and clean, including sweeping and general upkeep.

Education and Work Experience

• High school diploma or equivalent.
• Minimum 1 year of experience in a shop environment.
• Minimum 1 year of experience operating CNC turning equipment.

Physical and Skill Requirements

• Ability to work in a non-climate-controlled shop environment.
• Proficiency with basic shop tools, such as drills, hammers, screwdrivers, sanders, and saws.
• Ability to perform high school-level math, including decimals and metric measurements.
• Ability to read and interpret drawings/blueprints and use simple gaging tools, such as tape rules, dial calipers, and pin gauges.
• Fluent in reading and writing English.
• Ability to lift and move up to 40 pounds.

To be considered for this opportunity, please reach out to Trova Advisory Group by sending an email to with your resume, the position you are applying for, and a brief introduction.

When contacting us, please ask for the hiring team to ensure your application is directed to the right person. We look forward to hearing from you!

About Trova Advisory Group

Trova Advisory Group specializes in delivering a comprehensive array of staffing solutions tailored to meet the diverse needs of businesses across various sectors. Our expertise spans clerical, administrative, financial, and professional roles, offered through flexible arrangements including temporary placements, temp-to-hire options, and direct hire services. With a keen understanding of the dynamic demands of today's workforce landscape, we pride ourselves on providing top-tier talent solutions that empower organizations to thrive and succeed in a competitive market environment.

Trova Advisory Group is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at Include the nature of your request and your contact information, and we will be happy to assist you.

Trova Advisory Group offers a comprehensive benefits package offering Medical, and Dental benefit options to all eligible employees.

Looking for a technician that has a minimum of 8 years of experience operating and troubleshooting large HVAC systems and equipment which includes Air Handlers, RTUs, Chillers, Cooling Towers, VAV Boxes, DDC Controls, Pumps, Variable Frequency Drives and Building Automation Systems. Must have or needs to obtain a stationary engineer's license within 9 months of employment.

RUSH salaries are determined by many factors including, but not limited to, education, job-related experience and skills, as well as internal equity and industry specific market data. The pay range for each role reflects RUSH’s anticipated wage or salary reasonably expected to be offered for the position. Offers may vary depending on the circumstances of each case. Benefits can be found here.

Company:

Headquartered in Aurora, Il, McNish LLC is a leading manufacturer of primary and secondary process equipment for the municipal wastewater treatment industry. The business operates three distinct divisions, collectively representing some of the longest tenured brands in the country, with significant market share across the core product types. McNish carriers a strong track record of profitable growth and is poised to capitalize on critical need for further wastewater infrastructure investment nationwide.

Position Summary

The Project Manager is responsible for leading and executing customer projects related to wastewater treatment equipment. This includes full lifecycle project management—from contract award through delivery, installation, and closeout—working across multiple departments including Engineering, Manufacturing, Purchasing, and Accounting. This role mentors project teams, drives process improvements, and supports business development initiatives, ensuring alignment between project execution and organizational goals.

Key Responsibilities

• Manage the full lifecycle of customer contracts, from project kickoff through shipment and closeout
• Serve as the primary point of contact for assigned customers, maintaining professional and responsive communication
• Develop and manage detailed project schedules in collaboration with Engineering, Purchasing, and Manufacturing
• Track project milestones, identify risks or delays, and implement corrective actions proactively
• Coordinate with internal departments to ensure all technical and non-technical requirements are met
• Lead project meetings, generate status reports, and maintain project documentation
• Support contract change management, including scope adjustments, cost implications, and revised timelines
• Work closely with Accounting to align billing with contractual terms and project milestones
• Ensure compliance with McNish standards, customer specifications, and regulatory guidelines
• Participate in continuous improvement initiatives to enhance project execution efficiency and consistency

Qualifications

• Bachelor’s Degree in Engineering, Project Management, Business, or a related discipline
• 7+ years of project management experience in a manufacturing, engineering, or industrial services environment
• Experience coordinating field service or technical support teams in customer-facing projects
• Strong knowledge of production planning and supply chain operations
• Excellent communication, leadership, and problem-solving skills
• Ability to manage multiple complex projects simultaneously
• Proficient in Microsoft Word, Excel and Outlook.

Preferred:

• Experience in the municipal water or wastewater treatment industry
• PMP Certification or equivalent project management credentials
• Familiarity with ERP systems (e.g. Microsoft Great Plains, or similar)
• Experience with Microsoft Project or Equal

The is an exempt position offers a salary range of $69,999.00 to $94,736.64 Annually and is bonus eligible. This bonus is based on the company’s budgeted EBITDA performance. If the budgeted targets are not met, the Board of Directors will determine the bonus, if any.

McNish LLC is proud to be an Equal Opportunity Employer and does not discriminate based on race, color, religion, gender, sexual orientation, gender identity, nations origin, age, disability, marital status, veteran status, arrest record, or any other legally protected status.

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance
• Tuition Reimbursement

Company Description

ITW Electronic Component Solutions is a global leader, comprised of distinguished brands specializing in unique product technologies for various industries. These industry-leading brands provide innovative solutions to key markets, reinforcing ITW as a trusted name in electronic component solutions worldwide. The ITW ECS group includes ITW Formex, ITW Linx, and ITW Lumex, all of which contribute to the development of cutting-edge technologies across global markets.

The Buyer/Planner is responsible for planning and scheduling production activities while managing the procurement of raw materials, components, and services required for the ITW ECS business units. This role ensures that production schedules, material availability, and supplier performance align to meet customer demand, maintain optimal inventory levels, and support overall operational efficiency. This is a full-time, onsite position in Bartlett, IL. Only local candidates will be considered.

Key Responsibilities

Production Planning & Scheduling

• Develop, maintain, and adjust production schedules based on customer demand, forecasts, and capacity constraints
• Coordinate daily production planning activities with operations, ensuring labor, equipment, and materials are properly allocated
• Monitor work‑in‑process and finished goods levels to ensure on‑time order completion
• Communicate schedule changes or risks to operations, customer service, and leadership

Material Planning & Inventory Management

• Maintain accurate material requirements planning (MRP) within the ERP system
• Ensure adequate inventory levels are maintained to meet production schedules while minimizing excess or obsolete stock
• Conduct root‑cause analysis on shortages, delays, or inventory inaccuracies and implement corrective actions
• Track safety stock levels and update planning parameters as needed

Purchasing & Supplier Management

• Source, select, and purchase raw materials, components, and indirect supplies in alignment with production needs
• Manage supplier relationships and monitor vendor performance.
• Track and publish critical supply chain metrics, including customer and supplier on-time delivery.
• Follow up on open purchase orders, expedite materials when needed, and resolve delivery or quality issues
• Maintain accurate vendor records and purchasing data in the ERP system

Capacity & Resource Planning

• Analyze production capacity, equipment constraints, and labor availability to ensure feasible schedules
• Recommend adjustments to staffing levels, shift schedules, or outsourcing when required to meet demand
• Partner with engineering on new products, engineering changes, and phase-outs

Cross-Functional Collaboration

• Coordinate with procurement, operations, engineering, customer service, and quality to maintain smooth production flow
• Communicate proactively regarding material constraints, schedule risks, and priority changes
• Support S&OP processes by providing data on capacity, demand, inventory, and supplier performance

Continuous Improvement

• Implement Lean, Six Sigma, or other process improvement initiatives to enhance material flow and scheduling accuracy
• Improve planning tools, part parameters, and forecasting methods
• Participate in cost-reduction efforts through sourcing, inventory optimization, and process efficiencies

Minimum Required Skills and Education

• High School Diploma required
• 3 years of experience in production planning, materials management, or purchasing in a manufacturing environment
• Prior experience with ERP/MRP systems
• Strong analytical and organizational skills
• Proficiency with Excel and planning tools
• Knowledge of manufacturing processes, capacity planning, and inventory control principles
• Ability to speak, read, and write in English

Preferred Skills and Education

• Associate’s or Bachelor’s degree in Supply Chain, Operations, Business or related field
• Experience with Epicor ERP preferred

Work Conditions

• Primarily office environment, but may require periodic walking throughout the facility to coordinate with production, shipping, and warehouse teams

This is a full-time, onsite position in Bartlett, IL. Only candidates local to the Chicago area will be considered.

Compensation range: $30-$32 per hour

Why ITW ECS?

Here’s what we offer to help you build the future you want:

• Generous Retirement Benefits – 401(k) match PLUS an additional retirement contribution to help you plan for the future.
• Paid Time Off – Paid holidays, sick days, and vacation time to take time for what matters.
• Company-Paid Insurance – Life, AD&D, Short-Term & Long-Term Disability insurance to give you peace of mind.
• Family-Friendly Benefits – 4 weeks of paid parental leave and adoption reimbursement to support your family journey.
• Education Assistance – tuition reimbursement because we believe in investing in your personal and professional development.

ITW is an equal opportunity employer. We value our colleagues’ unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. 

As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. 

All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

About the Company

MultiTech, founded in 1993 and headquartered in Carol Stream, IL, is a top provider of highly engineered metal components and assemblies. MultiTech serves the Automotive, Industrial, Hydraulics and Power Transmission & Distribution market industries, with sales of $180 million. MultiTech operates seven manufacturing facilities and six distribution sites in the US, Mexico, and Asia. Our mission is to build a leading global metal manufacturing and assembly organization combining technology with superior quality manufacturing capabilities executed by our best asset - our employees. The ideal candidate will build on their experience and skills while growing with the company through career advancement opportunities.

About the Role

The Production Control Coordinator is responsible for planning, scheduling, and coordinating production activities to ensure efficient workflow, on-time delivery, and accurate ERP system data. Works closely with Operations, Purchasing, and Shipping to support daily manufacturing needs.

Responsibilities

• ERP Management (Epicor):
• Maintain and update production schedules within Epicor.
• Create and release work orders/jobs and ensure all required data is accurate.
• Monitor job statuses and perform job closings in a timely manner.
• Maintain accurate BOM/routing changes when identified thru Engineering.

Production Scheduling:

• Schedule primary machines and key resources to optimize throughput and minimize downtime.
• Adjust schedules based on priority changes, machine availability, material constraints, and customer needs.
• Communicate daily schedule priorities with Production Supervisors.

Material Coordination:

• Release raw material to jobs and ensure correct inventory transactions.
• Prevent shortages and ensure timely material availability.

Workflow & Coordination:

• Track WIP levels and move jobs through departments as required.
• Support continuous improvement to reduce bottlenecks and improve lead times.
• Maintain strong communication with Manufacturing, Quality, and Shipping teams.
• Reporting & Accuracy:
• Analyze and resolve Epicor transaction errors, quantity discrepancies, and job variances.
• Generate daily/weekly production reports for management review.

Qualifications

• Experience with ERP systems; Epicor experience preferred.
• Strong understanding of manufacturing workflows and machine scheduling.
• Ability to interpret work orders, BOMs, and blueprints (a plus).
• Excellent organizational and communication skills.
• Detail-oriented with strong problem-solving abilities.

Job Metrics / Success Indicators:

• On-time delivery performance
• Schedule adherence and machine utilization
• Accuracy of inventory and job costing
• Reduction in late jobs and production bottlenecks

Equal Opportunity Statement

MultiTech Industries is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.