Engineering Jobs in Eldridge Iowa Wfh

Within assigned service area, provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by Clinical Engineering (CE) Manager.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

MINIMUM QUALIFICATIONS

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Within assigned service area, provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by Clinical Engineering (CE) Manager.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

MINIMUM QUALIFICATIONS

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Within assigned service area, provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service, to general and specialized diagnostic, therapeutic, and support medical equipment, such as anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory, etc., as assigned by Clinical Engineering (CE) Manager.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Maintains a working knowledge of applicable federal, state and local laws, regulations and industry standards.  Complies with Trinity Health’s Organizational Integrity Program, Standards of Conduct, as well as other policies and procedures in order to ensure adherence in a manner that reflects ethical and professional integrity.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs services on specialized equipment in one or more of the following categories:  anesthesia machines, sterilizers, ventilators, ultrasound, laser, laboratory analyzers, etc.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, while working to accomplish team objectives and projects, and by soliciting feedback about one's effectiveness as a team member. 

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on deprartment guidelines)  to order parts and supplies required for  emergency service or repair of  radiological and general medical equipment. Recommends  test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provide on-call service coverage after normal business hours on a rotating basis.

Provides assistance and training to Bio-Medical Equipment Techs I and II as assigned by Clinical Engineering Manager.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

MINIMUM QUALIFICATIONS

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military related training required.  CBET or CLET certification preferred.

Five or more years experience or equivalent performing corrective and planned  maintenance on medical devices and/or clinical equipment.

Specialized training by manufacturer or third party equipment repair in such areas as

      anesthesia machines, sterilizers, ultrasound, ventilators, laser, laboratory analyzers, etc.

Ability to demonstrate a high level of proficiency in specialty area.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge  and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates on  use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and the ability to input data using keyboard.  Technician must be able to  follow complex written instructions, perform tasks and document actions taken.

 Strong customer service and communications skills are required to interact with hospital  personnel and vendors to achieve positive outcomes.

Maintain up to date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device  operations and safety functions.

          .

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time). Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

3rd shift

Job Description

Job Title: Quality Engineer

Location: Onsite

Shift: 3rd Shift

Work Hours: 40 hours/week + up to 5 hours overtime per week

Experience Required: 2+ Years

Important Note:

Visa sponsorship is not available now or in the near future for this position.

Job Overview

We are seeking a Quality Engineer to support quality activities on the shop floor, investigate product and process quality issues, and drive corrective actions. This role will work closely with inspectors, internal teams, and customers to ensure quality standards are maintained and improved.

Key Responsibilities

• Use quality tools and practices to establish approval criteria and identify quality concerns.
• Investigate product and process quality issues, collect and analyze data, and implement corrective actions.
• Provide work direction to inspectors regarding containment, quality procedures, and monitoring of critical processes.
• Facilitate quality-related discussions with internal and external customers to drive corrective actions.
• Generate monthly quality reports to track metrics and participate in management reviews.
• Support and identify Continuous Improvement (CI) projects.
• Spend 50–75% of time on the shop floor supporting manufacturing activities.

Required Qualifications

• 2+ years of experience in Quality Engineering or related field.
• Experience working in manufacturing/shop floor environments.
• Strong team collaboration skills.
• Proficiency in Microsoft Office Suite.
• Ability to analyze data and resolve quality-related issues.

Preferred Qualifications

• Mechanical Engineering or Industrial Engineering degree preferred (not required).
• Equivalent education or relevant work experience will also be considered.

Additional Requirements

• Metatarsal safety shoes are required on the shop floor.

Think Big Program

(Caterpillar Dealer Service Technology Program)

If you or anyone you know is considering careers please advise them of this fantastic opportunity in a high-demand field. Students can receive their Associate in Applied Sciences while going through our paid internship! Additionally, we also have a tuition reimbursement Program for students!

The Caterpillar Dealer Service Technology Program is a great opportunity for anyone interested in going to school to learn a skilled trade in a high-demand industry. Students will go through a two-year curriculum where they will rotationally attend Illinois Central College, located in East Peoria, for 8 weeks and then attend an Altorfer branch to complete an 8 week internship. This rotation continues throughout the duration of the program. A few of the courses they will take are Fundamentals of Hydraulics, Caterpillar Engine Fuel Systems, Fundamentals of Electrical Systems, Diagnostic Testing, and Undercarriage/Final Drives.

• Currently enrolled in a junior college with an above-average grade point & a drive for a career in service technology.
• Credentials, including being a self-starter with good time management, planning & organizational skills, team-oriented, and commitment to detail, are recommended.
• Must be able to lift 70lbs.
• Basic computer skills with programs such as Microsoft Word, Excel, and Outlook.
• Must have or will be receiving a High School Diploma or equivalent.
• Willingness to work overtime and some weekends when needed.
• Must have a valid driver's license with a clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on the final candidate).

Please visit the link below to apply and for more information.

academics/catalog/agricultural-and-industrial-technologies/caterpillar-dealer-service-technology/

Equal Opportunity Employer M/F/Disabled/Vets

This position works in a warehouse/shop environment. May on a continuous basis walk, climb on and off equipment, bend and lift up to 75-100lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Spanish language
• Being a resident in United States for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in United States
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands. 

Qualification path

No previous professional experience is required to apply to this role, however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project and your work will be subject to our standard quality assurance checks during the term of this agreement. 

Basic Requirements

• Full Professional Proficiency in Bengali and English language
• Being a resident in The United States or the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in India
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe but at your convenience.

Equal Opportunity

All qualified applicants will receive consideration for a contractual relationship without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. At TELUS Digital AI, we are proud to offer equal opportunities and are committed to creating a diverse and inclusive community. All aspects of selection are based on applicants’ qualifications, merits, competence, and performance without regard to any characteristic related to diversity.

Assistant Project Manager

Construction | Chicago, IL | Hybrid Flexibility

A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.

This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.

The Opportunity

• The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
• You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.

Key Responsibilities

• Support the planning and execution of construction projects valued up to $200M+.
• Assist in managing projects from preconstruction through project closeout.
• Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
• Work closely with internal architectural and engineering teams within the integrated AEC environment.
• Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
• Help maintain project schedules, documentation, and reporting.
• Support communication between clients, consultants, subcontractors, and internal teams.
• Participate in project meetings and assist in tracking action items and deliverables.
• Ensure project documentation complies with safety standards, contractual requirements, and company procedures.

Qualifications

• 2 to 6 years of construction project management experience.
• Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
• Exposure to projects valued $10M to $100M+.
• Strong organizational and coordination skills.
• Ability to support project financials, schedules, and documentation.
• Excellent communication and teamwork capabilities.
• Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.

Why Join

• Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
• Opportunity to work on complex projects across multiple sectors.
• Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
• Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
• Downtown Chicago office with a hybrid work schedule with 2 days work from home.

Are you a detail-oriented individual with a passion for research and a good understanding of national and local geography? This freelance opportunity allows you to work at your own pace and from the comfort of your own home.

A Day in the Life of an Online Data Analyst:

• In this role, you will be working on a project aimed at enhancing the content and quality of digital maps that are used by millions of people worldwide
• Completing research and evaluation tasks in a web-based environment, such as verifying and comparing data, and determining the relevance and accuracy of information.

Join us today and be part of a dynamic and innovative team that is making a difference in the world!

TELUS Digital AI Community

Our global AI Community is a vibrant network of 1 million+ contributors from diverse backgrounds who help our customers collect, enhance, train, translate, and localize content to build better AI models. Become part of our growing community and make an impact supporting the machine learning models of some of the world’s largest brands.

Qualification path

No previous professional experience is required to apply to this role; however, working on this project will require you to pass the basic requirements and go through a standard assessment process. This is a part-time long-term project, and your work will be subject to our standard quality assurance checks during the term of this agreement.

Basic Requirements

• Full Professional Proficiency in the English language
• Being a resident in the United States for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in the United States
• Ability to follow guidelines and conduct online research using search engines, online maps, and website information
• Flexibility to work across a diverse set of task types, including maps, news, audio tasks, and relevance
• Daily access to a broadband internet connection, computer, and relevant software

Assessment

In order to be hired into the program, you’ll take an open-book qualification exam that will determine your suitability for the position and complete ID verification. Our team will provide you with guidelines and learning materials before your qualification exam. You will be required to complete the exam in a specific timeframe, but at your convenience.