Engineering Jobs in Durham Middlesex County, CT

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

• Follow specific directions of Leader/Supervisor to carry out repair and restoration projects for engine parts.
• Layout work requirements and obtain needed equipment to perform routine repair and alteration operations.
• Perform bench repair operations to restore parts where close tolerances are not normally required and specifically defined criteria are used.
• Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary.
• .Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator’s check list for upkeep and to assure equipment operates properly.
• Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this job description.
• .Refer difficulties to Leader/Supervisor.
• Maintain logs and records as requested to communicate findings and prepare requests for approval.
• May be required to train for, obtain and maintain licenses, operator permits, and certifications within assigned area.
• May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual’s skills.

2nd shift hours are Monday through Friday from approximately 3 pm to 12 am.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

• Able to obtain/ maintain active Security Clearance after Day 1 of work.

• 2 years of experience in blueprint reading, CNC manual machining & reading. Knowledge of shop math.

Qualifications We Prefer: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in Middletown, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

What You Will Do:

Our Pratt & Whitney Middletown, CT facility has several exciting opportunities for a Production Machinist available on 1st shift.

1st shift hours are Monday through Friday from approximately 6:30 am to 3:30 pm.

In this role, you will setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. You will perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications. Recognize indications of dull or damaged cutting tools and replace as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools. Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning. Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

• Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.

• May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned area.

Qualifications You Must Have:

• High School Diploma or GED equivalent with 6 months of machining experience

In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need fora Facilities Mechanic Pipefitter 1st Shift (onsite)

What You Will Do:

• Perform repetitive tasks related to preventative maintenance, supply and servicing of facilities, machinery and equipment.
• Assist trade groups as required.
• Under the direction of supervisor or project leader, work from specified methods and procedures, exercise care and use judgment for routine tasks associated with machine and equipment servicing and assist trades groups on projects.
• Assist others in system operation, care, use and preventative maintenance techniques where a limited knowledge of specialized trade terminology is required to understand instructions.
• Work with manufacturing departments and trades groups responsible for developing preventative maintenance servicing schedules for machine tools and equipment.
• Preform similar duties throughout the facility within the scope and skill level of this job description. Assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more effective use of skills.
• Refer difficulties to leader/supervisor.
• May be required to train for, obtain and maintain licenses, operator permits and certifications for assigned area.

Qualifications You Must Have:

• High School/ GED
• Requires knowledge of arithmetic involving decimals and fractions to work from drawings and sketches make required computations and to work with variable measuring instruments. 
• 6-12 months experience.

Qualifications We Prefer:

• Should be able to read and comprehend service manuals, instruction booklets and use mechanics’ hand and power tools.

• In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

Learn More & Apply Now!

In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is onsite.Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

The Cost Engineer is responsible maintaining a true and accurate cost structure and coordinating reporting elements key to developing accurate cost reports. This is an interface between project management, cost management and accounting.

Responsibilities:

• Comply with (and actively promote) all Safety policies and procedures including reporting all accidents, incidents and near-misses to ensure adherence to our Number One Core Value – Safety first, in everything we do.
• Review project features with Estimating department and ensure that work quantities are being entered correctly on a daily basis.
• Verify proper coding for phases, hours, and slips.
• Close out the completed project phases and verify progress entries.
• Conduct monthly cost review meeting with project team.
• Assign and initiate new cost codes for change orders, tracking items and back charges as required.
• Verify pencil sheets / pay requisitions.
• Take the lead in developing quarterly cost to complete reports.
• Review and process change orders for TMC and subcontractors / vendors.
• Review and process cost adjustments.
• Identify items that are exceeding the budget and communicate to Project Manager.
• Assist project management team with quarterly reports for contract status, contract profit, unit cost report, cost projections, revenue projects, change order status and change order costs.

Qualifications:

• Bachelor's degree in Construction Management, Engineering or related field and / or minimum of 5 years of heavy civil construction experience
• Experience working with project management and a thorough knowledge of heavy construction logistics, resource planning, construction sequencing and material management preferred.
• Familiar with a variety of the field construction concepts practices, and procedures.
• Demonstrated knowledge of Viewpoint Accounting and Job Costing System is desirable.

Necessary Attributes:

• Must possess the ability to adapt to different personalities and management styles.
• Attention to detail, organization prioritization and the ability to handle multiple tasks is required.
• Team player and with strong interpersonal skills.
• Strong verbal and written communication skills.
• Must possess strong technology skills.
• Self-starter with good verbal and written communication skills.
• Reliance on experience and judgment to plan and accomplish goals.
• Dedicated and hard working.
• Strong commitment to success of all.
• Possess a strong work ethic.
• Demonstrate the upmost professionalism in how you represent yourself.
• Show quality in everything you do.
• Lead with integrity while producing high quality work.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States with Middlesex Paving earning an equally solid regional presence and reputation.

Position Summary:

The Assistant Project Manager shall oversee the total construction effort to ensure projects are safely constructed in accordance with design, budget, and schedule. This includes interfacing with client representatives, subcontractors, and suppliers.

Responsibilities:

• Comply with (and actively promote) all Safety policies and procedures including reporting all accidents, incidents and near-misses to ensure adherence to our Number One Core Value – Safety first, in everything we do.
• Review project features with the Estimating Department.
• Work with the Project Engineer and Superintendent to develop and maintain a project schedule with the appropriate attributes.
• Submit preliminary paperwork such as submittals, introductory letters, subcontractor approvals, lump sum breakdowns of work items, affirmative action documents, etc.
• Develop a submittal log, a project organization chart, and a material storage plan.
• Initiate project startup and closeout sheet and submit a copy to the construction department and set up and maintain project files.
• Required to sign off on the budget prior to the start of construction.
• Responsible for all aspects of cost management for the project.
• Submit a quarterly cost revision with an explanation of any cost variance.
• Submit change order logs to the regional office monthly.
• Coordinate and direct all project activities with the Project Superintendent/General Superintendent to ensure that all milestones are met and job continuity is maintained.
• Conduct weekly meetings.
• Prepare and review periodic estimates with the owner's representative/Resident Engineer and submit an approved original estimate or pencil sheet copy to the regional office with the appropriate subcontractor quantity split.
• Attend final punch list inspection and/or closeout meeting and complete final documents.
• Maintain contact with the project Owner and Architect/Engineer to obtain reduction of retainage and final payment and close out jobsite office.

Qualifications:

• B.S. in Civil Engineering major or construction related field.
• Minimum of 5 years of successful and progressive experience in the civil construction field.
• Experienced in budget management, schedule, quality control, and knowledge of all phases of construction.
• OSHA 10 Certified.

Necessary Attributes:

• Must possess the ability to adapt to different personalities and management styles.
• Team player and with strong interpersonal skills.
• Ability to manage a team in an efficient and effective manner.
• Self-starter with excellent verbal and written communication skills.
• Reliance on experience and judgment to plan and accomplish goals.
• Dedicated and hard working.
• Possess strong leadership qualities.
• Above average organizational skills.
• Strong commitment to success of all.
• Possess a strong work ethic.
• Demonstrate the upmost professionalism in how you represent yourself.
• Show quality in everything you do.
• Lead with integrity while producing high quality work.

We offer our full-time and eligible part time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry leading referral program, and generous paid time off.

We are seeking a detail-oriented Electrical Test Engineer with experience in hardware systems and embedded firmware environments. This role focuses on validating the functionality, reliability, and performance of electronic products through structured test development and execution. The ideal candidate will collaborate with multidisciplinary engineering teams to support product quality throughout the development lifecycle.

Key Responsibilities

Test Development & Validation

• Create and implement structured test plans, procedures, and scripts to verify hardware and firmware requirements.
• Perform functional, performance, and reliability testing on embedded systems and electronic assemblies.
• Ensure products meet defined specifications and quality benchmarks.

Automation & Tools Development

• Develop and maintain automated test frameworks for electronic systems.
• Build scripts and utilities to streamline validation processes and improve repeatability.
• Contribute to continuous enhancement of test infrastructure and methodologies.

Debugging & Root Cause Analysis

• Troubleshoot firmware and hardware issues using standard laboratory instrumentation.
• Analyze system behavior to isolate faults and support corrective actions.
• Partner with development engineers to resolve defects efficiently.

System Integration Testing

• Validate interaction between hardware components (e.g., PCBs, sensors, communication interfaces) and embedded firmware.
• Conduct integration and regression testing to ensure overall system stability.

Cross-Functional Collaboration & Documentation

• Work closely with engineering, quality, and project stakeholders to coordinate testing activities.
• Document test procedures, results, and defect reports in a clear and organized manner.
• Provide technical feedback to support design improvements.

Process Improvement

• Identify opportunities to improve validation processes, coverage, and efficiency.
• Stay current with emerging tools, technologies, and best practices in electronic testing.

Required Qualifications

• Bachelor's degree in Electrical Engineering or related discipline from an accredited institution.
• Solid understanding of circuit analysis and electronic theory (AC/DC fundamentals).
• Working knowledge of analog and digital circuits, including amplifiers, switching circuits, regulators, filters, and I/O interfaces.
• Hands-on experience with common lab equipment such as oscilloscopes, digital multimeters, and signal generators.
• Experience with schematic capture tools, CAD platforms, and integrated development environments.
• Proficiency in embedded firmware development using C/C++.
• Familiarity with electronic component selection and evaluation.
• Understanding of PCB assembly processes and electronic manufacturing fundamentals.
• Strong analytical, documentation, and communication skills.
• Ability to work effectively within cross-disciplinary engineering teams.

Preferred Qualifications

• Experience with communication interfaces such as CAN, USB, Ethernet, or similar protocols.
• Exposure to embedded Linux environments.
• Familiarity with wireless communication technologies.
• Experience using issue tracking and collaboration tools.
• Working knowledge of version control systems (e.g., Git or similar tools).

Employment Solutions of NY is seeking an experienced Manufacturing Engineer for our successful and growing manufacturing client in the Wallingford, CT area. The Manufacturing Engineer will develop, improve, and maintain manufacturing processes to ensure quality and efficiency in production operations.

Salary: $90K-110K

Key Responsibilities

• Lead new product introductions from design transfer to production.
• Develop, document, and improve manufacturing processes for assembly and testing.
• Pilot prototype builds and validate production methods.
• Troubleshoot production and equipment issues.
• Design and implement fixtures, tooling, and visual work instructions.
• Integrate and support new manufacturing equipment.
• Train production personnel on assembly and testing processes.
• Manage multiple engineering projects and priorities.

Must-Have Qualifications

• Bachelor’s degree in Electrical, Mechanical, or Manufacturing Engineering (or equivalent).
• Familiarity with SolidWorks or CAD
• Microsoft Office -Excel, Word, and PowerPoint.
• Hands-on soldering and circuit board repair experience.
• 5 years of experience in manufacturing or process engineering.
• Strong problem-solving, communication, and organizational skills.
• Knowledge of various manufacturing methods
• Familiarity with medical device industry or ISO 9001, ISO 13485, and IPC-A-610 standards a plus
• Experience with Python, LabVIEW, or other programming tools a plus
• Understanding of digital communication protocols (I2C, SPI, RS-232) a plus
• Experience with microcontrollers (PIC, Arduino) and signal processing techniques.

Interested? Let's chat!

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

OVERVIEW OF POSITION:

The mission of the Maintenance Manager is to manage maintenance functions for a facility. Areas included are building utility systems, equipment maintenance and building and grounds maintenance. Ensures that maintenance department objectives are met including project, cost, quality and safety factors.

RESPONSIBILITIES OF THIS POSITION:

• Leads the Maintenance team to ensure efficient and effective support for Production and the facility, including:

-Support in training of Maintenance personnel.

-Assists and guides Maintenance personnel as needed.

-Is responsible for the safety and good housekeeping work habits of all Maintenance personnel.

-Assigns priorities and work to Maintenance personnel.

-Participates in Maintenance personnel evaluations.

-Order supplies according to business needs within limits.

-Oversees and coordinates Maintenance projects.

• Ensures that maintenance department objectives are met including project, cost, quality and safety factors.
• Responsible for developing and maintaining PM program for the company.
• Is on call to come to work during off shift hours to help in emergency situations.
• Attend and participate in training opportunities and seminars relevant to this position.
• Foster a of continuous improvement environment with clearly defined objectives and plans.
• Provide continued support to meet the objectives.
• Responsible for the annual EPA reporting and corresponding regular system checks.
• Support in Capital requests as needed.
• Makes sure that all work is performed according to Local, State and Federal Government rules and regulations.
• Ensures that outside contractors perform as specified on the contracts and follow all Habasit rules and regulations.
• Areas included, but are not limited to, are building utility systems, equipment maintenance and building and grounds maintenance.
• Any other duties as assigned.

COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Required – Bachelors Degree in Engineering or Related Field
• Required – Five years experience in manufacturing/production/assembly environments
• Required – Competency with Process Improvement/Lean concepts
• Required – High Competency with MS Word, Excel, PowerPoint, CRM Applications
• Preferred – Electricians, Plumbing, Welding Licenses