Engineering Jobs in Cooper City Florida

This is a highly responsible position that supports the health, safety and welfare of Tribal members and the public. The incumbent in this position is responsible for managing the regulation and inspection of building construction, electrical, mechanical, and plumbing installations and directing compliance and enforcement of all related federal, state and local ordinances of the Seminole Tribe of Florida (STOF). Work involves technical review of all types of construction drawings, plans, and specifications to ensure compliance with applicable codes and ordinances. The incumbent provides general oversight, management, and leadership to building inspectors, plans examiners, and permit technicians as required and is responsible for the issuance of all permits and Certificates of Occupancy in accordance with the Florida Building Code and Tribal administrative policy. The person is also responsible for the administration of the Tribe’s elevator and commercial structure annual inspections programs.

The individual works closely with the Director of the Tribal Inspector’s Department to support all departmental programs and initiatives, including but not limited to the development of the departmental budget and strategic plans, development of building inspections processes and programs, evaluation and improvement of service delivery systems, and administration of the Tribe’s Unsafe Structures Ordinance Program. The incumbent may attend Tribal Council meetings or other community meetings and works with all necessary stakeholders to resolve complaints, address concerns, or solve problems as needed. Bachelor’s degree in Engineering, Building Construction, Civil Engineering, Architecture or related field is required. Master’s degree is preferred. A minimum of ten (10) years of experience as an Architect, Engineer, Building Inspector, Build Code Administrator, or Construction Superintendent with at least five (5) years being in a supervisory capacity is required; or, any equivalent combination of education, experience and training will be considered.

Prior experience with EnerGov software system is preferred. Possession and maintenance of a Building Code Administrator certification by the Florida Building Code Administrators and Inspector’s Board is required. Possession of a valid Florida Driver’s License is required. Must have excellent organizational and interpersonal skills including the ability to clearly communicate complex ideas in English both orally and in writing. Must be able to respond and commit to full duty operations during Hurricane or other emergency events. Demonstrate proficiency with Microsoft software programs. Demonstrate excellent organizational and interpersonal skills including English written and oral communication skills are required. Ability to travel and work a flexible schedule including evenings, weekends and holidays.

The Broward County Board of County Commissioners is seeking qualified candidates for Construction Project Management Supervisor.

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANYTIME.

The Construction Project Management Supervisor with the Seaport Facilities Maintenance Division is responsible for performing advanced professional and administrative work in managing maintenance projects for the Port Everglades Department. Specifically:

• Oversee water/sewer, stormwater design, construction, and other infrastructure to include regulatory compliance.
• Review as-built drawings, architectural, engineering plans, and specifications to ensure compliance with federal, state, and local building codes.
• Monitor and manage maintenance and capital projects
• Manages and supervises contractors and consultants in their performance and adherence to contract specifications; negotiates construction and consultant contracts, amendments, change orders, and work authorizations.
• Review plans and specifications of projects; proposals, engineering calculations, pay applications, permit packet and invoices.
• Reviews progress of maintenance projects and resolves construction-related issues; negotiates fees and scope with consultants. Signs and seals permit applications and drawings.
• Monitor and escort contractors and consultant throughout the Port to perform their services.
• Keep track of work orders in AIM to update notes, status, and pictures as required.
• Reviews bids for conformance to maintenance & construction specifications; administers and manages consultant and contractor contracts for adherence and performance; assists in the bidding process and contract packet development.
• Holds periodic meetings with contractors and consultants to review work progress and manages all aspects of the project.
• Reviews and approves proposals, invoices and payment requests from contractors and consultants; prepares vendor evaluations at the conclusion of projects. Monitor and oversee contractors goal assignment with OESBD (small business).
• Assists in the preparation of new fiscal year budget requests; carries out special assignments requested by the Division Assistant Director and performs related work as assigned.
• Coordinates with internal supervisor, Port Maintenance Manager, stakeholders, including Port users and County Agencies, i.e., County Attorney, Purchasing Division, Finance, Small Business, Risk Management, Operations, Security, BSO, Fire Rescue, Health Department, Water and Wastewater Department, other county agencies, local agencies, state, and federal agencies.
• Performs other related duties as required.
  
  

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Engineering License OR Architectural License OR NCIDQ (Space Planning Only) based upon area of assignment.

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

Competencies

• Financial Acumen

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Plans and Aligns

• Ensures Accountability

• Drives Results

• Develops Talent

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

The Broward County Board of County Commissioners is seeking qualified candidates for Capital Project Management Supervisor - Construction Management Division.

Please Note: This announcement will remain open until sufficient number of applications are received and may close at any time.

The ideal candidate will have experience managing vertical construction projects with an aptitude for and an ability to manage a variety of challenging projects. The candidate will possess experience in preparation of scope, budget, schedule, documents for the selection of consultants, negotiating agreements, management of projects through all phases of development including planning, programming, design, bid documentation, procurement, construction administration, and warranty administration as well as the oversight of design consultants, contractors, and stakeholders.

The top candidate will have experience in the latest construction methods and technology including Building Information Modeling (BIM), document control programs, and scheduling programs. The ideal candidate will also be a LEED accredited professional or possess a WELL Building Standard accredited professional designation and experience along with an enthusiasm and passion for resiliency and sustainability.

General Description

Performs advanced professional and administrative work with supervisory responsibilities in the management of construction projects for the County.

Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.

Requires a Bachelor's degree from an accredited college or university with major coursework in architecture and/or engineering or closely related field; Master's degree preferred.

Requires six (6) years in professional architectural or engineering work, including four (4) years of experience in project management and supervision of staff appropriate to the area of assignment or closely related experience.

Registration as a professional architect or registered engineer or NCIDQ (Space Planning Only) based upon area of assignment.

Duties and Responsibilities

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.

Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.

Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.

Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.

Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.

Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.

Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.

Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.

Performs related work as assigned.

• Financial Acumen: Interprets and applies key financial indicators to make better business decisions. Fosters accountability for making good financial decisions; provides guidance to help the team make astute decisions. Summarizes financial performance data and explains implications for the organization.
• Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Asks questions to encourage others to think differently and enrich their analyses of complex situations. Accurately defines the key elements of complex, ambiguous situations.
• Decision Quality: Makes good and timely decisions that keep the organization moving forward. Consistently demonstrates strong judgment; may be sought out by others for expertise and guidance. Takes smart, independent action in urgent and non-routine situations, knows when to escalate for others' involvement.
• Balances Stakeholders: Anticipates and balances the needs of multiple stakeholders. Provides guidance so that others understand the needs of different stakeholders and can balance them appropriately. Makes sure people understand and adhere to ethical standards when working with stakeholders; models and ensures cross-cultural sensitivity.
• Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Makes nimble plans accounting for a range of risks and contingencies. Achieves greater cohesion, integration, and alignment between own group and other areas. Both persistent in adversity and nimble in change.
• Ensures Accountability: Holds self and others accountable to meet commitments. Tracks performance and strives to remain effective, learning from both successes and failures. Readily takes on challenges or difficult tasks and has reputation for delivering on commitments.
• Drives Results: Consistently achieves results, even under tough circumstances. Emphasizes the importance of results; encourages a sense of urgency in others; challenges poor outcomes or unproductive behaviors. Provides assistance or encouragement to help others over obstacles.
• Develops Talent: Develops people to meet both their career goals and the organization's goals. consistently shares ideas, insight, and best practices to help people reach their development goals and achieve optimal results. Shares targeted feedback in a prompt, constructive, and encouraging manner.
• Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Tailors communication content and style to the needs of others. Pays attention to others' input and perspectives, asks questions, and summarizes to confirm understanding.
• Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Serves as an example of adaptability and provides guidance and support to help others adapt to new situations. Considers the needs of clients, constituents, and the organization; shifts priorities appropriately.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

None.

County Core Values

All Broward County employees strive to demonstrate the County's four core behavioral competencies.

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED

Broward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.

Note: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.

All Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.

All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.

Aircraft Technology, Inc., (ATI), a subsidiary of HEICO Corporation, is an FAA/EASA Part 145 Repair Station. ATI supports a wide range of rotary and fixed wing components found on both commercial and military platforms around the world.

The Quality Manager (QM) will be able to perform comfortably in a fast-paced, deadline-oriented FAA 145 environment. Candidates must demonstrate the ability to successfully execute multiple complex tasks simultaneously; as well as the ability to work effectively both as a team member and independently. The candidate must be capable of quickly learning and using technology concepts and methods to support maintenance operations, with the flexibility to support multiple changing project needs.

• Responsible for the managing of the company's Quality Assurance/Control functions this includes the daily managing of the incoming, in-process, NDT, and final inspection activities.
• Works with Engineering and Production with new repair capability.
• Provides periodic detailed quality reports to the General Manager as requested for use in monitoring progress, annual budgets, staffing, and efficiency.
• Must have a high sense of urgency and the ability to meet schedule requirements.
• Responsible for technical data and ensuring currency.
• Represents the company during customer visits, audits, and meetings.
• Ensures all Quality Control metrics are met.
• Implements systems to minimize downtime by reducing production rework and recalls.
• Must be able to read and understand Service Bulletins, service letters, and Airworthiness Directives approved by the FAA or industry-accepted standard practices.
• Ensures quality processes are followed based on FAA regulations and manual procedures.
• Interprets quality assurance philosophy to key personnel in the organization.
• Establishes inspection procedures for receipt of materials, in-process, and final acceptance activities.
• Responsible for all the reports of Quality inspections, results, corrective actions, and recommended preventive actions.
• Reviews Quality efficiency and approves time.
• Organized and able to prioritize work activities to meet production schedules.
• Recommends tools and equipment to operate the business.
• Responsible for compliance applicable to regulatory requirements.
• Writes, updates, and maintains SOPs (Standard Operating Procedures) for the Quality Assurance Program.
• Manages the outside vendor program.
• Manages inspectors to accomplish inspection activities.
• Ensures that the processes implemented for the Quality Control systems are being maintained.
• Define test standards and specify test equipment and procedures.
• Participate in design review meetings to contribute quality assurance requirements and considerations.
• Supervise and train all members of the quality control department to ensure their expertise and productivity.
• Keeps management team abreast of significant issues or developments identified during quality assurance activities and actions being taken to improve the situation.
• Works with Customer Service to coordinate inspection and acceptance activities.
• Review Quality requirements with customer representatives to ensure compliance.
• Maintains a working knowledge of government and industry quality standards.
• Review contractually required documentation for accuracy and completeness.
• Performs special assignments related to product support requiring the gathering and analysis of data.
• Establish and maintain calibration procedures for instrumentation to assure traceability of instrumentation.
• Responsible for warranties and customer complaints.
• Audits technical and managerial processes to ensure compliance.
• Manages the scrap program.
• Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners, suppliers, and direct reports.
• Manages, develops, and motivates employees.
• Provides education and coaching on the Quality System.
• Responsible make airworthiness determinations on behalf of the company.
• Managers the daily activities of the QC Supervisor.
• Manages the safety program.
• Perform other duties, as required.

JOB TITLE: Electrical Install Assembler (Early Career) - Free Housing Support ($5K Relocation Bonus)
Location: On-site in North Charleston, SC
PAY RATE: $26-31/hour

We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client.

Job Details:

• 
  
• 
  

  Job Type: Contract (12 months with potential for extension)

  
  
  
• 
  

  Industry: Aerospace / Defense / Aviation

  
  
  
• 
  

  Benefits: Medical, dental, and vision (Cigna)

  
  
  
• 
  

  Perks: Bonus potential + Priority access via Tier 1 supplier

  
  
  
• 
  

  Openings Nationwide: Thousands of opportunities across the U.S.

  
  
  

Qualifying Questions:

• 
  
• 
  

  Are you a U.S. person as defined under ITAR regulations?

  
  
  
• 
  

  Do you meet the educational and experience requirements for this role?

  
  
  
• 
  

  Can you commute to the job location or relocate if necessary?

  
  
  

Summary:

• 
  
• 
  

  Route wire harnesses to supports per blueprint instructions and 787 specifications.

  
  
  
• 
  

  Build connectors, splice wires, crimp, and terminate wiring.

  
  
  
• 
  

  Install connectors to receptacles and electronic components.

  
  
  
• 
  

  Perform repairs and rework processes to incorporate authorized engineering changes.

  
  
  
• 
  

  Conduct fiber optic cleaning, inspection, light loss testing, routing, and installation.

  
  
  
• 
  

  Perform bond and ground operations, including CRNs, jumpers, ground stud installation, and resistance testing.

  
  
  

Requirements:

• 
  
• 
  

  High School Diploma or GED required; vocational school or Associate degree preferred.

  
  
  
• 
  

  6+ months of experience using software applications such as internet navigation, email, Microsoft Office, or other specialized programs.

  
  
  
• 
  

  6+ months of experience following detailed work instructions and interpreting blueprints, drawings, or specifications in English.

  
  
  
• 
  

  6+ months of experience in advanced manufacturing, technical, or mechanical environments using hand, power, or pneumatic tools.

  
  
  
• 
  

  6+ months of experience with structural parts fabrication and assembly processes.

  
  
  
• 
  

  Ability to perform tasks requiring bending, kneeling, crouching, standing, walking, climbing/balancing, reaching overhead, twisting, and head/neck rotation.

  
  
  
• 
  

  Ability to lift and carry up to 35 lbs.

  
  
  
• 
  

  Ability to work safely with high-hazard chemicals.

  
  
  
• 
  

  Must be able to work variable shifts (1st, 2nd, or 3rd) based on business need.

  
  
  
• 
  

  Must be a U.S. Citizen (as defined by ITAR).

  
  
  

About Us:

The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles.

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.

Eligibility Requirements:

Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations.

Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense

Take your career to new heightsapply today!

The Fullstack Lead Developer reports to the Senior Manager of Software Engineering and is responsible for leading the design, development, and delivery of complex software solutions across the product portfolio.

This role requires deep hands-on expertise in NextJS, React, Java, and database technologies, along with strong leadership capabilities. The ideal candidate brings extensive experience in fullstack architecture, DevOps practices, solution design, and performance optimization. This individual will lead engineering efforts from concept through production while mentoring developers and ensuring operational excellence.

Responsibilities:

· Lead end-to-end solution design and implementation from concept through production deployment.

· Architect and develop scalable, resilient, and high-performance applications.

· Provide technical leadership across frontend and backend development initiatives.

· Collaborate with Product teams to provide accurate effort estimation and planning.

· Ensure adherence to engineering standards, governance, and best practices.

· Coach and mentor engineers, fostering a culture of innovation and continuous improvement.

· Conduct code reviews and enforce high standards for quality, security, and maintainability.

· Design and document technical solutions, architecture decisions, and engineering patterns.

· Evaluate and recommend modern technologies and best practices aligned with business goals.

· Lead troubleshooting efforts for complex production issues, including performance bottlenecks and system failures.

· Partner with QA teams to define and execute robust testing strategies, including unit, integration, and regression testing.

· Ensure solutions align with enterprise architecture and integration standards.

· Manage effort tracking and identify cost optimization opportunities.

Required Qualifications:

· Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, Mathematics, or related field.

· 7+ years of experience in Software Engineering with strong fullstack expertise.

· Advanced proficiency in NextJS, React, Java, and database technologies (SQL, MySQL preferred, plus non-relational databases such as MongoDB).

· Strong understanding of software architecture, design patterns, and modern development frameworks.

· Experience designing and building scalable, high-availability systems.

· Proven ability to lead technical initiatives and mentor engineering teams.

· Strong knowledge of application testing strategies and DevOps practices.

· Experience working in large, cross-functional, globally distributed teams preferred.

· Excellent troubleshooting, analytical, and problem-solving skills.

· Strong written and verbal communication skills.

Preferred Experience:

· Experience leading fullstack architecture initiatives across complex enterprise environments.

· Exposure to CI/CD pipelines and cloud-based deployment models.

· Experience evaluating and implementing optimization tools and lifecycle models.

· Strong understanding of cost management and engineering effort tracking.

At Terumo we believe in the power of personal growth and will encourage you to get in the driver's seat - progressing in the direction you want to go by deepening your skills throughout your career. We want you to be bold, think outside the box, experiment, innovate and deliver what's next for quality healthcare. You will be part of a collaborative, respectful and resilient team of associates and leaders around the world, working together as partners to achieve more than you thought possible, providing real-world, impactful solutions for patients.

Join us and help shape wherever we go next!

Advancing healthcare with heart

Job Summary:

The Site Leader is responsible for setting the strategic direction and providing overall leadership for the Sunrise manufacturing site, ensuring operational excellence while supporting the organization’s broader business and growth objectives. This role leads the site leadership team and oversees manufacturing operations, manufacturing engineering, process development, sustaining engineering, and warehouse activities.

Through close partnership with functional leaders, the Site Leader ensures alignment and effective execution across key site functions, including quality, supply chain, finance, facilities, and human resources.

The Site Leader is accountable for delivering best-in-class operational performance while ensuring full compliance with all regulatory and corporate requirements. This role fosters a culture of continuous improvement, operational discipline, and talent development to position the Sunrise site as a high-performing, competitive manufacturing operation.

Job Details:

Strategic Leadership

• Establish and communicate the strategic vision for the Sunrise site aligned with divisional and corporate objectives.
• Build unity at the site and drive a culture reflecting our core values and financial discipline.
• Communicate effectively to the team and stakeholders based on facts and financials.
• Motivate the team on site to achieve a common goal to serving patients and meeting our strategic goals.

Operational Excellence

• Lead the development of a best-in class manufacturing organization utilizing modern manufacturing, engineering, and operational practices.
• Implement continuous improvement initiatives to enhance productivity, quality, service levels, and cost performance.
• Adopt automated tools to drive efficiency of operation and increase accuracy in inspection.
• Accelerate data collection and analysis to drive further improvement in operational efficiencies.

Cross-Functional Leadership

• Provide leadership and oversight for manufacturing and engineering while ensuring effective coordination with quality, supply chain, finance, facilities, and human resources.

Performance and Financial Management

• Develop site operating plans, key objectives, and budgets to guide and control operations.
• Monitor performance against goals and ensure achievement of production, cost, and financial targets.

Production and Delivery Execution

• Ensure production schedules and product shipments are executed on time, within budget, and in full compliance with quality and regulatory standards.

Talent Development and Organizational Leadership

• Build, develop, and lead a high-performing leadership team.
• Ensure effective recruitment, development, and succession planning to support long-term organizational capability.

Operational Planning and Forecasting

• Execute manufacturing strategies aligned with demand forecasts and business requirements.
• Analyze operational performance and implement corrective actions to ensure achievement of manufacturing and financial objectives.

Regulatory and Compliance Oversight

• Ensure full compliance with Terumo policies and procedures as well as all applicable FDA, ISO, GMP, and other regulatory requirements.

Capacity and Growth Planning

• Anticipate and plan for future capacity needs to support growth, product transfers, and potential mergers or acquisitions.
• Evaluate expansion opportunities, including facility expansion or new site build.

External and Regulatory Engagement

• Ensure site operations remain in full compliance with federal, state, and local regulatory authorities and maintain effective relationships with relevant agencies.

Additional Responsibilities

• Perform other duties consistent with the leadership and management of a large, regulated manufacturing site.

Position Requirements:

Knowledge, Skills, and Abilities (KSAs)

• Demonstrated leadership capability to set strategic direction, inspire teams, and deliver results through others.
• Strong interpersonal and influencing skills with the ability to coach, develop talent, and foster high-performing teams.
• Excellent verbal, written, listening, and presentation communication skills.
• Proven ability to lead organizational change, communicate effectively, and drive adoption of new processes or initiatives.
• Strong cross-functional collaboration skills with the ability to partner effectively across manufacturing, engineering, quality, supply chain, and commercial teams.
• Sound judgment and decision-making capability, including the ability to make timely decisions with incomplete information.
• Strong critical thinking, analytical, and problem-solving skills.
• Demonstrated project and operational leadership with the ability to prioritize initiatives and execute effectively.
• Ability to drive accountability and performance while creating a culture of urgency, ownership, and continuous improvement.
• Working knowledge of medical device regulatory and quality systems requirements, including FDA, GMP, ISO, and related standards.
• Financial acumen with the ability to manage budgets and drive cost-effective operational performance.
• Proficiency with standard business software including Microsoft Office (Word, Excel, PowerPoint, Outlook).

Background and Experience

• Bachelor’s degree in Engineering, Natural Sciences, or Business Administration required; advanced degree preferred, or equivalent combination of education and experience.
• Minimum 15 years of progressive experience in manufacturing, manufacturing engineering, or operations leadership required.
• Minimum 10 years of leadership experience managing manufacturing or engineering teams in a regulated environment.
• Experience within the medical device, pharmaceutical, or similarly regulated industry strongly preferred.
• Demonstrated experience leading multi-disciplinary teams across manufacturing, engineering, etc.
• Experience managing operational budgets and driving operational performance improvements.
• Proven track record of delivering results on schedule and within budget in a complex manufacturing environment.

Final compensation packages may be higher or lower than what is listed, and will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. We provide competitive and comprehensive benefit options which include: annual bonus, paid vacation, paid holidays, health, dental and vision benefits, 401(k), with matching contributions, tax advantage savings accounts, legal plan, voluntary life and AD&D insurance, voluntary long-term disability, short term disability, critical illness and accident insurance, parental leave, personal leave, tuition reimbursement, travel assistance, and an employee assistance program. Salary range - $200,000 to 260,000

Ready to take your aircraft career to new heights?

A fast-growing Miami-based FAA Part 145 engine repair shop is looking for an experienced Aircraft Engine Assembly Technician to join their expanding team.

If you thrive in a hands-on engine environment and enjoy seeing a build through from strip to final prep — this could be your move.

The Role – Assembly Technician

You’ll play a key role across the full build cycle, including:

• Disassembly, sub-assembly and final assembly of QECs, modules and components

• Intermediate and depot-level repairs using approved data and published work scopes

• Building and mating QECs to engines, performing leak checks and preparing units for test and preservation

• Disassembly, assembly and testing of aircraft accessories

• Interpreting engine manuals, drawings and technical bulletins to ensure correct configuration and compliance

• Ensuring all servicing is completed in accordance with approved data and regulatory standards

• Maintaining control and proper use of tools and equipment

What You’ll Need – Assembly Technician

• Experience with electrical systems and wiring, hydraulic, oil, fuel and air systems

• Ability to read and interpret engine manuals, drawings/prints and service bulletins

• Fluent English communication skills

• Basic personal tool set

• A&P Licence strongly preferred

Due to ITAR regulations, applicants must be a US Person (US citizen or lawful permanent resident).

What’s On Offer – Assembly Technician

• $1,500 sign-on bonus (paid in two instalments for hourly employees)

• Competitive pay

• Medical, Dental & Vision coverage + supplemental benefits

• 401(k) with 4% company match

• $25,000 company life insurance

• Paid Time Off

We are an equal opportunity employer and welcome applications from all qualified individuals regardless of race, colour, religion, sex, national origin, disability, veteran status or any other protected characteristic.

Senior Data Analyst, Web Analytics - Dania Beach, FL

Exciting Opportunity for a Senior Data Analyst, Web Analytics!

Are you passionate about data analytics, SQL, and Google Analytics? Do you want to be part of a fast-growing team in the travel industry, working on a platform that millions of travelers use daily? If so, we have a great opportunity for you!

Why Join Us?

Work on a leading e-commerce travel platform, similar to Expedia and Travelocity.

Hybrid role in Dania Beach, FL (3 days onsite, flexible scheduling).

Full-Time

Exciting projects – building a new analytics framework from scratch, integrating UX/UI, and improving travel product data insights.

Competitive benefits & travel perks – free flights, discounted vacations, and more!

What You’ll Do

• Analyze Web & E-commerce Data – Extract insights from Google Analytics & BigQuery to understand customer behavior.
• Data Processing & SQL Queries – Work with large datasets in BigQuery, Redshift, or Snowflake.
• Collaborate with Data Engineering – Ensure proper tracking, tagging, and data collection using Google Tag Manager.
• Report Findings to Leadership – Build dashboards in Looker Studio to drive business decisions.

What We’re Looking For

2+ years of SQL experience (BigQuery, Redshift, Snowflake, or equivalent).

1+ years working with Google Analytics and web analytics tools.

Strong understanding of e-commerce and customer behavior tracking.

Experience with Google Tag Manager (or similar) is a plus.

Knowledge of Looker Studio, Tableau, or Power BI is a plus.

Job Description:

• Manufacturing Engineer role, you will serve as a key execution-focused engineering resource supporting a landing gear Maintenance, Repair, and Overhaul (MRO) facility.
• The primary emphasis of this position is the execution of large capital expenditure (CAPEX) projects that enhance manufacturing capability, capacity, safety, and productivity.
• You will work closely with operations, quality, facilities, and supply chain teams to deliver equipment installations, process improvements, and infrastructure upgrades that are safe, compliant, and production ready.
• This role also supports repair and overhaul engineering responsibilities that are inherently tied to manufacturing engineering, including development of master manufacturing plans, onboarding of new programs, and direct shop-floor support within a regulated aerospace environment.

Responsibilities:

• Lead and execute large CAPEX projects within a landing gear MRO environment, including equipment selection, layout development, installation, commissioning, and production handover
• Translate business and operational requirements into executable manufacturing solutions that improve safety, quality, cost, delivery, and capacity
• Partner with operations, facilities, EH&S, quality, and supply chain to ensure successful project execution and compliance with regulatory and internal requirements
• Develop, author, and maintain master manufacturing plans (master routers), work instructions, and Bills of Material that define standardized, repeatable repair and overhaul execution
• Support onboarding of new programs into the facility, including creation of master production plans and preparation for introduction into the shop
• Provide hands-on engineering support to the shop floor, including troubleshooting manufacturing processes, tooling, equipment, and test systems involving mechanical, electrical, hydraulic, or control related issues
• Conduct equipment acceptance, process validation, and capability assessments to ensure processes and assets are production-ready
• Review engineering specifications, repair orders, Service Bulletins, Airworthiness Directives, and related technical data to ensure compliance with approved repair and overhaul methods
• Interpret engineering drawings and facilitate creation of new drawings or correction of errors identified during repair and overhaul operations
• Review drawings and technical documentation prepared by other engineering staff
• Liaise with Quality Control, Materials, Production, and other departments to resolve shopfloor technical issues efficiently
• Ensure engineering documentation, drawings, routers, and records remain current and that engineering-related production issues and resolutions are properly documented
• Provide and support training for shop-floor personnel related to new equipment, tooling, processes, and program introductions
• Drive root cause analysis and corrective actions for manufacturing, equipment, or process issues
• Support continuous improvement initiatives focused on throughput, yield, turnaround time, safety, and operational stability

Requirements:

• Develop supplemental documentation required to support shop-floor execution, including procedures, job aids, and supporting technical documentation
• Identify, specify, quote, and procure required tooling and equipment in support of CAPEX projects and new program introductions, including PO issuance, installation, safety reviews, and operator training
• Develop and implement manufacturing processes, tooling concepts, and workflows that support landing gear repair and overhaul operations
• Experience executing capital projects, including equipment installation, commissioning, and production handover
• Hands-on experience troubleshooting manufacturing or test equipment, including mechanical, electrical, hydraulic, or control systems
• Aerospace or aviation manufacturing experience, particularly within a landing gear or MRO environment
• Experience interpreting and reviewing engineering drawings and technical documentation
• CAD modeling experience (e.g., Siemens NX, CATIA V5, or equivalent)

Education:

• Bachelors