Engineering Jobs in Broad Brook Connecticut
31 positions found — Page 2
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.
Responsibilities:
- Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
- Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
- Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining or two years of CNC experience.
- Aerospace experience preferred.
- Basic understanding of math or industrial mathematics.
- Good written and verbal skills.
- Basic computer skills.
- Ability to read technical drawings.
- Ability to set, use or setup various measuring devices.
- Solid problem solving skills.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Position Requirements
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Lathe Machinists - 1st & 2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
**$2500 SIGN-ON BONUS**
Essential Duties & Responsibilities:
- Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
- Select appropriate cutting tools, fixtures and tool holders for a given job.
- Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
- Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
- Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
- Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.
Position Requirements
Required Knowledge, Skills, & Abilities:
- Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
- Knowledge of metal characteristics in a production setting is desirable.
- Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
- Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
Education & Experience Required:
- 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
- Fully capable of reading, understanding, and following written and oral work instructions in English.
- Ability to lift or transfer components or objects of no more than 50 pounds.
- HS diploma or GED.
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Manufacturing
Req Number
SKI-22-00001
Position
Machinist - Lathe 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Paula Inglis
This position is currently accepting applications.
Apply Now
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.
Essential Functions and Duties:
- Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
- Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
- Analyze engineering drawings for materials, process fabrication and design elements.
- Specify patterns on programming sheet for way part is to be machined.
- Assure program meets target cycle time and program generates geometry to customer requirements.
- Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
- Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
- Support lean activities both within the Engineering group and across the organization.
Complexity of Tasks:
Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.
Qualifications:
- Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
- Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
- Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
- 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
- CAD/CAM software: Siemens NX and MasterCam required
- Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
- CG Tech Vericut experience required.
- Capable of debugging programs and working closely with shop floor and inspection personnel.
- Some tool design experience preferred.
- Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
- Must be a team player and have the ability to work closely in a shop environment.
- Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
- Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Ability and willingness to train others.
Can work independently and lead a project.
This role is for 1st or 2nd shift.
1st shift is 7am-3:30.
2nd shift is 3:00
- 11:30pm This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g.
Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions.
Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Checks to make sure that the material to be used meets all specifications.
Obtains bar stock or material from staging area.
Performs complex set-ups of own work or for others.
Makes all required adjustments to the machinery.
Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
Ensures that all manufactured parts are in full compliance to quality standards.
Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
Replaces all worn or damaged tooling as necessary.
Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels.
Keeps the equipment and work area clean and organized.
Returns excess bar stock or material to the staging area.
Moves the finished work to an assigned area.
Enters all work performed into the database and documents all scrap.
Notifies lead person or supervisor of any parts shortages or machining problems/difficulties.
Packs and washes/preserves parts as needed.
Performs other machining and assembly operations as needed.
Performs other related duties as required.
Interacts with associates from all departments.
Requirements: High School diploma or equivalent.
Technical school training a plus.
3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus.
Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools.
Must be able to use standard gauges and inspection techniques.
Experience with SPC, inspection documentation, and problem solving is a plus.
Strong interpersonal and analytical skills.
Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
Must be able to read CNC programs.
Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs.
Able to stand for up to 8 hours.
PIe4204bd7e1eb-6932
The ideal candidate will have 2-3 years of training or leadership experience, with a preference for at least 2 years of hands-on training.
This role involves leading students through an in-depth course that combines classroom instruction with practical, hands-on training.
When not engaged in training activities, the individual will set-up/operate machinery and serve as a subject matter expert on the manufacturing floor, providing guidance to apprentices and ensuring optimal production processes.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to: Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program Key Responsibilities: Training and Development:Design and deliver comprehensive training programs covering CNC machining disciplines.
Conduct both classroom and hands-on training sessions, ensuring that students gain a thorough understanding of CNC machining principles and practices.Assess trainees' performance, provide constructive feedback, and implement improvement plans as needed.Stay updated with the latest advancements in CNC technology and integrate relevant updates into the training curriculum.
Mentorship and Support:Act as a subject matter expert on the manufacturing floor, providing guidance and support to apprentices and less experienced machinists.
Foster a collaborative and inclusive learning environment, encouraging knowledge sharing and continuous improvement.Author engineering change notices to enhance production, aligning with best practices for CNC operationsAuthor work instruction, work aids, and associated training aids that improve operator effectiveness when performing their duties.
Machining Operations:Set up, program, and operate CNC machines according to operational work instructions and specifications.
Interpret technical drawings, blueprints, and CAD models to determine machining requirements.Perform routine maintenance and troubleshooting of CNC equipment to ensure optimal performance.Monitor machining processes, make necessary adjustments, and ensure adherence to quality standards.Document any inefficiencies in the process, issuing change notices to engineering or programming for issue resolution or process corrections.
Qualifications: High school diploma or equivalent; additional technical certifications or an associate degree in a related field is preferred.
At least 2 years of experience in training or leadership role, with a preference for candidates who have conducted hands-on training.
Minimum of 5 years of hands-on experience in CNC machining, with proficiency in turning, Swiss Turning, Mill-turn, and milling, processes.
Strong understanding of CNC programming, setup, and operation.
Excellent communication and interpersonal skills, with the ability to convey complex information clearly and effectively.
Proficiency in reading and interpreting technical drawings and blueprints.
Commitment to safety protocols and quality standards in a manufacturing environment.
Ability to work collaboratively in a team setting and adapt to evolving training and production needs.
Physical Demands: Legend N (Not applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0-2.5 hours/day) F (Frequently) Position requires this activity up to 66% of the time (2.5-5.5 hours/day) C (Constantly) Position requires this activity more than 66% of the time (5.5 hours/day) Lift/Carry 10-30lbs F Stand F Walk F Manually manipulate F Squat or kneel O Bend O Reach above shoulder O PI41afdb5-
Quality Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.
Essential Duties & Responsibilities:
Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.
- Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
- Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
- Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
- Strong understanding of units of measure and applicability to GD&T principles
- Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
- Strong professional ethics combined with the ability to function well on teams.
Position Requirements
- Experience in aerospace manufacturing or similarly regulated industry preferred.
- Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
- High School Diploma or GED
- Knowledgeable of MS Word, and Excel
- Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
- Familiarity with operation/programming of FARO arm preferred
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Quality Control
Req Number
QUA-25-00017
Position
Quality Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
TruGreen accepts applications on an ongoing basis.
Job DescriptionTruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
Responsible for accurately documenting all repairs in an electronic maintenance management system.
Maintain parts inventory and work area in clean and orderly fashion.
Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
Develops and executes preventative maintenance programs.
Prepares and manages maintenance budget.
Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
Ability to operate independently and collaboratively within a team.
Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Attention to detail.
Verbal and written communication skills.
Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
Sit, stand and walk
Use hands and arms to handle, feel or reach
Speak and hear
Use close vision abilities
Operate a vehicle with a valid drivers license
Occasionally required to:
Lift or move up to 50 lbs
Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
Low to moderate
Adverse Conditions
Minimal
Ability to speak, read and write fluently in English is required.
You MUST BE physically located in the United States while performing this job.
TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.
Pay Ranges $42,002.00 - $75,602.00This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.
TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.To view our disclaimer,
TruGreen accepts applications on an ongoing basis.
Job Description
TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
- Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
- Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
- Responsible for accurately documenting all repairs in an electronic maintenance management system.
- Maintain parts inventory and work area in clean and orderly fashion.
- Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
- Develops and executes preventative maintenance programs.
- Prepares and manages maintenance budget.
- Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
- High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
- Ability to operate independently and collaboratively within a team.
- Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
- Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
- Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Attention to detail.
- Verbal and written communication skills.
- Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
- Sit, stand and walk
- Use hands and arms to handle, feel or reach
- Speak and hear
- Use close vision abilities
- Operate a vehicle with a valid drivers license
Occasionally required to:
- Lift or move up to 50 lbs
- Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
- Low to moderate
Adverse Conditions- Minimal
Pay Ranges
$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.TruGreen accepts applications on an ongoing basis.
Job Description
TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
- Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
- Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
- Responsible for accurately documenting all repairs in an electronic maintenance management system.
- Maintain parts inventory and work area in clean and orderly fashion.
- Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
- Develops and executes preventative maintenance programs.
- Prepares and manages maintenance budget.
- Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
- High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
- Ability to operate independently and collaboratively within a team.
- Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
- Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
- Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Attention to detail.
- Verbal and written communication skills.
- Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
- Sit, stand and walk
- Use hands and arms to handle, feel or reach
- Speak and hear
- Use close vision abilities
- Operate a vehicle with a valid drivers license
Occasionally required to:
- Lift or move up to 50 lbs
- Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
- Low to moderate
Adverse Conditions- Minimal
Pay Ranges
$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.