Engineering Jobs in Bettendorf Iowa
34 positions found — Page 2
General Summary
As the Director of Maintenance, you will be the on‑site authority guiding all maintenance and service operations to ensure aircraft are safe, airworthy, and ready for flight. You'll oversee maintenance activities in full alignment with FAA regulations, the Quality Control Manual (QCM), the Repair Station Manual (RSM), and all approved maintenance data. Your leadership ensures every aircraft is maintained and released to service in full compliance with 14 CFR Part 145.
In this pivotal role, you will provide the strategic direction, hands‑on leadership, and regulatory accountability that keeps our maintenance organization operating at peak performance. You'll lead and mentor maintenance teams, oversee maintenance planning, and drive the daily execution of service operations at your assigned location-all while fostering a culture of safety, quality, and operational excellence.
Primary Responsbilities
Regulatory & Airworthiness Oversight
Ensure compliance with 14 CFR Part 145, Repair Station Manual, Quality Manual, and applicable FAA guidance.
Ensure maintenance is performed using approved technical data and proper procedures.
Ensure proper execution of return-to-service documentation.
Support FAA, customer, and third-party audits and ensure corrective actions are implemented and sustained.
Coordinate with Quality and Engineering on regulatory interpretation and compliance matters.
Maintenance & Service Execution
Direct all maintenance, inspection, repair, and modification activities at the site.
Ensure effective planning, sequencing, and control of maintenance work.
Ensure personnel, tooling, facilities, and materials are adequate for assigned work.
Conduct daily production oversight to ensure safe, compliant, and timely execution.
Safety Management
Promote and enforce a safety-first culture in accordance with the company Safety Management System (SMS).
Ensure hazards, incidents, and near misses are reported and addressed.
Support investigations and corrective actions related to maintenance events or deviations.
Personnel & Training
Ensure maintenance personnel are properly trained, qualified, and authorized to perform assigned tasks.
Ensure compliance with training, certification, and recurrent qualification requirements.
Provide leadership, direction, and accountability to maintenance supervisors and staff.
Operational Performance
Monitor and manage performance related to schedule adherence, labor utilization, and rework.
Identify and address operational constraints impacting compliance, safety, or delivery.
Support coordination with Planning, Parts, Quality, and Customer Experience functions.
Top Candidates Will Possess
Bachelor's degree in Aviation Management, Business or related field preferred
Minimum 10 years aircraft maintenance experience
Minimum 5 years in a maintenance leadership role within a Part 145 environment
FAA Airframe & Powerplant (A&P) certificate required
Deep understanding of business aviation airframes, powerplants, and diagnostics
Strong working knowledge of FAA Part 145 (and Part 91/135 interfaces), safety management systems, and quality assurance principles
Ability to troubleshoot complex maintenance issues and guide teams through efficient, compliant resolutions
Proficient in planning, workflow optimization, scheduling, and resource allocation
Strong communicator capable of translating technical issues into clear, customer‑friendly information
Builds trust with aircraft owners, operators, and OEMs through transparency and exceptional service delivery
Drives long‑range planning, departmental budgeting, capacity forecasting, and capability development
Identifies new service opportunities, efficiencies, and technology integrations to keep the MRO competitive
Inspires, coaches, and builds high‑performing maintenance teams
Demonstrates calm, confident decision‑making in high‑pressure operational environments
Instructions
Relocations assitance is there for this role
This Jobot Job is hosted by: Dallas Gillespie
Are you a fit? Easy Apply now by clicking the \"Apply\" button
and sending us your resume.
Salary: $100,000 - $130,000 per year
A bit about us:
Manufacturing company w/ excellent benefits and great pay, and exceptional benefits!
Why join us?
We value you! Our impressive benefits package, bonus potential and salary reflect that! Come work somewhere you are recognized for your contributions!
Relocation Bonus
Annual Performance Bonus
Profit Sharing
Fuel Stipend for commuting to and from work
Job Details
Job Details:
We have an exciting opportunity for a highly skilled and experienced Maintenance Supervisor to join our dynamic team in the Manufacturing industry. This role is permanent and full-time, offering a competitive salary and benefits package, as well as opportunities for professional development and advancement.
Responsibilities:
As a Maintenance Supervisor, your primary responsibilities will include:
1. Supervising and coordinating the activities of the maintenance team to ensure all maintenance operations are completed efficiently and effectively.
2. Developing and implementing maintenance procedures, monitoring systems, and preventive maintenance programs to uphold high standards of work.
3. Maintaining a safe work environment at all times!
Qualifications:
To be considered for the Maintenance Supervisor role, you must possess the following qualifications:
1. A minimum of 5 years of experience in a maintenance role in either one of the following settings: mill, manufacturing, or industrial.
2. Proven experience in maintaining complicated mill machinery of all types.
3. Strong knowledge of construction materials, processes, and equipment.
4. Excellent problem-solving abilities and a keen eye for detail.
5. Exceptional leadership and team management skills, with a proven ability to motivate and guide a team.
6. Proficiency in using maintenance management software and other related technological tools.
7. Strong understanding of safety regulations and procedures in the construction industry.
8. Excellent communication and interpersonal skills, with the ability to liaise effectively with team members and stakeholders at all levels.
9. A relevant certification or degree in construction, engineering, or a related field is preferred.
If you are a dedicated professional with a passion for maintenance management and a commitment to excellence, we would love to hear from you. Apply today and take the next step in your career with our innovative company.
Interested in hearing more? Easy Apply now by clicking the \"Apply\" button.
Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobots policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: /privacy-policy
One of our direct Manufacturing clients is hiring for a Supervisor, below are the details:
Position Title: Unit Supervisor
Duration: 12 months
Location: Milan, IL
Onsite Role Only
2nd shift - 2:30pm to 11pm
Potential OT including Saturdays
You will be responsible for leading a production workforce to meet the distribution priorities based on the production schedule. In addition, you will:
• Be responsible for leading a wage workforce to accomplish the safety, quality, delivery, and efficiency goals through Continuous Improvement (CI) plans and activities.
• Ensure that assigned personnel have appropriate training, work instruction and tools to successfully do their job.
• Lead safety through regular safety communications, driving engagement in the CI Safety and Ergonomic Risk Assessment process, prompt near miss reporting with a focus on quick, thorough safety corrective actions.
• Monitor Production Plans, troubleshoot workmanship problems, and generally supervise production activities to ensure that manufactured products meet or exceed all established quality requirements.
• Lead employee engagement activities, while establishing a positive employee environment through communications, feedback and overall guidance.
• Monitor individual/group performance and take corrective action including discipline, as needed and respond to complaints to ensure the Company and employees adhere to policies, practices, procedures, and work rules.
Requirements
• Excellent communicator, who thrives on solving problems and working in a team environment.
• Experience with, or supporting, shop floor manufacturing and/or warehouse operation.
• Demonstrated team leadership skills.
• Experience communicating across functions (such as: supply management, engineering, operations and human resources).
• IF NEEDED – Ability and flexibility to work across shifts based on production needs.
Desired Skills/Experiences
• Experience with continuous improvement pay plans (CIPP).
• Experience with wage/union employee policies, practices, procedures and work rules.
• Experience in leadership or supervision of a union workforce.
• Working knowledge of the CI continual improvement process and 5S.
Education
• Bachelor’s degree or equivalent experience.
EEO:
“Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.”
General Summary
As the Director of Maintenance, you will be the on‑site authority guiding all maintenance and service operations to ensure aircraft are safe, airworthy, and ready for flight. You'll oversee maintenance activities in full alignment with FAA regulations, the Quality Control Manual (QCM), the Repair Station Manual (RSM), and all approved maintenance data. Your leadership ensures every aircraft is maintained and released to service in full compliance with 14 CFR Part 145.
In this pivotal role, you will provide the strategic direction, hands‑on leadership, and regulatory accountability that keeps our maintenance organization operating at peak performance. You'll lead and mentor maintenance teams, oversee maintenance planning, and drive the daily execution of service operations at your assigned location-all while fostering a culture of safety, quality, and operational excellence.
Primary Responsbilities
Regulatory & Airworthiness Oversight
- Ensure compliance with 14 CFR Part 145, Repair Station Manual, Quality Manual, and applicable FAA guidance.
- Ensure maintenance is performed using approved technical data and proper procedures.
- Ensure proper execution of return-to-service documentation.
- Support FAA, customer, and third-party audits and ensure corrective actions are implemented and sustained.
- Coordinate with Quality and Engineering on regulatory interpretation and compliance matters.
Maintenance & Service Execution
- Direct all maintenance, inspection, repair, and modification activities at the site.
- Ensure effective planning, sequencing, and control of maintenance work.
- Ensure personnel, tooling, facilities, and materials are adequate for assigned work.
- Conduct daily production oversight to ensure safe, compliant, and timely execution.
Safety Management
- Promote and enforce a safety-first culture in accordance with the company Safety Management System (SMS).
- Ensure hazards, incidents, and near misses are reported and addressed.
- Support investigations and corrective actions related to maintenance events or deviations.
Personnel & Training
- Ensure maintenance personnel are properly trained, qualified, and authorized to perform assigned tasks.
- Ensure compliance with training, certification, and recurrent qualification requirements.
- Provide leadership, direction, and accountability to maintenance supervisors and staff.
Operational Performance
- Monitor and manage performance related to schedule adherence, labor utilization, and rework.
- Identify and address operational constraints impacting compliance, safety, or delivery.
- Support coordination with Planning, Parts, Quality, and Customer Experience functions.
Top Candidates Will Possess
- Bachelor's degree in Aviation Management, Business or related field preferred
- Minimum 10 years aircraft maintenance experience
- Minimum 5 years in a maintenance leadership role within a Part 145 environment
- FAA Airframe & Powerplant (A&P) certificate required
- Deep understanding of business aviation airframes, powerplants, and diagnostics
- Strong working knowledge of FAA Part 145 (and Part 91/135 interfaces), safety management systems, and quality assurance principles
- Ability to troubleshoot complex maintenance issues and guide teams through efficient, compliant resolutions
- Proficient in planning, workflow optimization, scheduling, and resource allocation
- Strong communicator capable of translating technical issues into clear, customer‑friendly information
- Builds trust with aircraft owners, operators, and OEMs through transparency and exceptional service delivery
- Drives long‑range planning, departmental budgeting, capacity forecasting, and capability development
- Identifies new service opportunities, efficiencies, and technology integrations to keep the MRO competitive
- Inspires, coaches, and builds high‑performing maintenance teams
- Demonstrates calm, confident decision‑making in high‑pressure operational environments
ThinkBIG Intern - Davenport, IA - August 2026
Req No.
2025-5443
Category
ThinkBIG Internship
Location
US-IA-Davenport
Type
Regular Part-Time
Union or Non-Union
Non-Union
Division
Heavy
Company
Altorfer Inc
Working Hours/Days
8 am - 4:30 pm Monday - Friday
Store/School hours and some Saturdays as needed.
Overview
Think Big Program
(Caterpillar Dealer Service Technology Program)
If you or anyone you know is considering careers please advise them of this fantastic opportunity in a high-demand field. Students can receive their Associate in Applied Sciences while going through our paid internship! Additionally, we also have a tuition reimbursement Program for students!
Basic Duties
The Caterpillar Dealer Service Technology Program is a great opportunity for anyone interested in going to school to learn a skilled trade in a high-demand industry. Students will go through a two-year curriculum where they will rotationally attend Illinois Central College, located in East Peoria, for 8 weeks and then attend an Altorfer branch to complete an 8 week internship. This rotation continues throughout the duration of the program. A few of the courses they will take are Fundamentals of Hydraulics, Caterpillar Engine Fuel Systems, Fundamentals of Electrical Systems, Diagnostic Testing, and Undercarriage/Final Drives.
Qualifications
- Currently enrolled in a junior college with an above-average grade point & a drive for a career in service technology.
- Credentials, including being a self-starter with good time management, planning & organizational skills, team-oriented, and commitment to detail, are recommended.
- Must be able to lift 70lbs.
- Basic computer skills with programs such as Microsoft Word, Excel, and Outlook.
- Must have or will be receiving a High School Diploma or equivalent.
- Willingness to work overtime and some weekends when needed.
- Must have a valid driver's license with a clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on the final candidate).
Please visit the link below to apply and for more information.
academics/catalog/agricultural-and-industrial-technologies/caterpillar-dealer-service-technology/
Equal Opportunity Employer M/F/Disabled/Vets
Physical Requirements/Working Conditions
This position works in a warehouse/shop environment. May on a continuous basis walk, climb on and off equipment, bend and lift up to 75-100lbs. May be required to wear appropriate safety equipment (IE- Safety glasses or side shields) when needed. The noise level in the work environment is usually moderate to high. May intermittently sit at a desk for a period of time to answer telephone and write or use a keyboard to communicate through email. Must be flexible to work varying schedules and hours as needed. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Why Work for Altorfer?
At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.
Need help finding the right job?
We can recommend jobs specifically for you!
Click here to get started.
• Work with cross-functional teams to identify and implement continuous improvement projects for safety, quality, delivery, and cost
• Lead and manage small to moderate scope capital projects
• Establish and maintain layouts, labor standards, methods and sequence of events for assembly operations
• Analyze, develop, and implement new manufacturing processes and technologies
• Provide support and troubleshooting for current assembly operations
What Skills You Need
• 1 or more years of experience with manufacturing processes, quality, tooling, preventative maintenance, and facilities
• Experience with engineering tools and manufacturing execution systems
• Experience leading and implementing projects in a fast-paced manufacturing environment
• Strong communication skills with operators, peers, and leadership
• Self-motivated and able to execute with minimal supervision
Ideally you will have a degree or equivalent related work experience in the following:
Bachelor's degree in engineering/technology discipline or equivalent related work experience
(Industrial, Mechanical, Manufacturing, Electrical engineering preferred)
• Strong personal accountability, follow-through, and ability to foster a positive, engaged team environment
Identify and implement cost reduction, quality, safety and ergonomic improvement ideas for loader cab assembly operations
Applicants must hold a valid passport.
Company Environment
Our client is an international manufacturer of automated industrial equipment used in high-demand production environments
This position plays a central role in supporting and stabilizing service operations.
Role Overview The Customer Support & Service Coordination Specialist is the main contact point for North American customers regarding after-sales matters.
This is an office-based role focused on coordination, communication, and planning, covering:
- Spare parts requests and follow-up
- Planning and coordination of field service activities
- First-level customer interaction
- Daily coordination between service teams, sales, and internal operations
Key Responsibilities
- Serve as the first contact for customers (email & phone) regarding:
- Spare parts needs
- Service interventions
- Coordination of technical support requests
- Support the scheduling and planning of field service technicians:
- Organizing interventions
- Managing priorities and urgent cases
- Aligning customer needs with technician availability
- Act as a daily interface between:
- Field service teams
- Spare parts logistics
- Sales and internal teams
- Industrial customers
- Ensure timely follow-up and clear communication on all open requests
- Contribute to the continuous improvement of service coordination processes
A strong engineering background is not required for this role.
However, the ideal candidate will bring:
- Experience in customer service within an industrial or manufacturing setting
- Familiarity with:
- Spare parts coordination
- Service planning or scheduling
- Supporting field service teams
- Experience interacting with B2B industrial clients
- Strong organisational and prioritisation abilities
- Comfort handling multiple requests in parallel
- Clear, professional communication skills (written and verbal)
- An understanding of service responsiveness in machine-based environments
This role is not suited to a purely administrative profile with no exposure to industrial realities.
We are looking for someone who understands:
- How industrial service organisations function
- The impact of equipment downtime on customers
- The importance of follow-up, structure, and accountability in after-sales service
Field Technician, Rental
Req No.
2026-5559
Category
Technicians
Location
US-IA-Bettendorf
Type
Regular Full-Time
Union or Non-Union
Non-Union
Division
Rental
Company
Altorfer Inc
Working Hours/Days
7:00 AM - 4:00 PM Monday- Friday, Saturdays and overtime as needed
Basic Duties
- Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and Aerial work platform equipment.
- Responsible for picking-up and delivering equipment when necessary.
- Complete associated paperwork.
- Establish and maintain service-oriented working relationship with customers.
- Provide excellent customer service to all customers.
- May perform other related duties as requested and/or assigned.
Qualifications
- Two or more years of related work experience.
- Must have a good understanding of gas and diesel engines, hydraulic and electrical systems.
- Must be a self-starter, organized, with strong customer service orientation.
- Automotive and Industrial Maintenance Technicians are encouraged to apply.
- Must be able to lift 75 lbs.
- Computer literacy required. Must be familiar with programs such as Microsoft Office Suite.
- Ability to follow all safety rules and wear proper safety equipment.
- Excellent planning & organizational skills are needed.
- Must take initiative, be team oriented and willing to adapt to change.
- Ability to respond to callouts, work overtime and weekends when needed.
- Excellent communication skills (written, e-mail, and verbal) are required.
- High School Diploma or equivalent is required.
- Must possess a valid driver's license and clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate
Posted Min
USD $27.00/Hr.
Posted Max
USD $33.00/Hr.
Physical Requirements/Working Conditions
This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis walk, bend and lift up to 75 lbs. Will be required to wear appropriate safety equipment (IE- Safety glasses or side shields, hearing protection, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Need help finding the right job?
We can recommend jobs specifically for you!
Click here to get started.
Contract to Direct Hire Role!
*Looking for Design/CAD experience and we will teach the sprinkler side.
*Mechanical Designer or Mechanical Engineer for this role
Job Description
- Design fire suppression systems including wet, dry, pre-action, and foam fire sprinkler systems
- Perform detailed shop drawings (field installation drawings and hydraulic calculations), field engineering functions (on the jobsite support and review), and operation planning (field installation support)
- Compile and prepare plan submittals (shop drawings) and material submittals for review by architects, engineers, clients, and authorities having jurisdiction Coordinate fire sprinkler design with the building structure and other MEP subcontractors.
- Prepare project material stock lists to be used for material procurement assist with Field engineering troubleshooting and support for the installation operations on the jobsite Prepare \"as-built\" drawings for in-house archive and client files.
- General understanding of job costs related to engineering, material and fabrication, and labor.
- Work productively and meet deadlines timely.
- Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment.
- Perform work safely and effectively.
- Understand and follow oral and written instructions, including warning signs, equipment use, and other policies.
- Work during normal operating hours to organize and complete work within given deadlines.
- Willing to teach.
Skills Required
- Experienced with MS Excel, Word, and AutoCAD preferred.
- High level of self-discipline, motivation, and ability to operate in a team environment with strong interpersonal, written and verbal communication skills.
- Team player, but able to work independently; Highly motivated, with a demonstrated passion for excellence and taking initiative
- Strong organizational skills, time management, and attention to detail
- Regular, reliable attendance
- Experience with AutoSPRlNK, HydroCAD, or SprinkCAD A PLUS
We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
JOB-10042598
Job Description
Arconic is currently in search of an entry level Electrical Engineer to join our Plate Department based in our Davenport, IA location.
At Arconic, we take pride in our work and our innovative products and technologies that advance sustainable solutions for a better world. We strive to create a safe, inclusive, and collaborative workplace with competitive benefits, development opportunities and a culture that values and rewards employees on all levels of the organization.
Job Summary:
This entry level Electrical Engineer is a great opportunity to apply your technical skills while coordinating numerous capital projects across the Plate department. This role is driven by self-directed work and collaborative efforts with a team of Electrical Engineers, Technical staff, maintenance, and production across the department.
The Electrical Engineer reports to the Lead Electrical Engineer in the department and will work Monday through Friday during daytime hours. You will support off-shifts as needed for your respective projects.
In this role, you will:
- Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure.
- Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production.
- Use PI Vision and Data Link to analyze process issues and provide input to solve process problems.
- Create and develop electrical control solutions that will support process improvements and improve equipment reliability.
- Assist production and maintenance with equipment and process issues.
- PLC/HMI and controls redesign and upgrades of existing processes.
- Install and troubleshoot camera systems on industrial equipment.
- Incorporate SMART Manufacturing principles and tools into automated inspection systems to improve processes, data collection/analysis, and drive quick results in recovery improvements.
Qualifications
You have:
- Bachelor’s Degree in Electrical Engineering Technology or Electrical Engineering from an accredited institution
- 1-3 years of Electrical Engineering experience (including Internship)
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire Visa sponsorship is not available for this position
- This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
- 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.
Exceptional Candidates possess:
- Manufacturing experience in a highly industrial environment
- 1-3 years' experience with PLC's, HMI's, AC/DC drives & motors, measuring devices and ethernet cameras
- Proficiency with Rockwell programming software (i.e.: RS Logix and FactoryView)
- Proficiency in Microsoft Office Suite and Project programs
- Good oral and written communication skills in a variety of settings (shop floor, peers, plant leadership, etc)
- Demonstrated success as a project implementation manager, including budget and schedule development.
About Us
Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build.
We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders.
At Arconic, we:
Act With Integrity.
We lead with respect, honesty, transparency and accountability.
Safeguard our Future.
We protect and improve the health and safety of our employees, communities and environment.
Grow Stronger Together.
We cultivate an inclusive and diverse culture that advocates for equity.
Earn Customer Loyalty.
We build customer partnerships through best-in-class products and service.
Drive Operational Excellence.
We pursue continuous improvement through innovation, agility, people development and collaboration.
Create Value.
We achieve success by generating and growing value for our stakeholders.
This position is subject to Export Control Law
This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R.
- 730, et seq.) and/or the International Traffic in Arms Regulations (ITAR). Authorizations from the relevant government agency may be required to meet export control compliance requirements.
Equal Employment Opportunity Statement
Arconic is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics.
About The Team
ABOUT Davenport Works
Davenport Works is the country’s largest aluminum rolling mill, it was opened in 1948 and currently employs more than 2,000 people and ships product worldwide. It is in Riverdale in the Quad Cities (Davenport and Bettendorf in southeastern Iowa, and Rock Island and Moline in northwestern Illinois). The Quad Cities is 3 hours south-west of Chicago, 4 hours north of St. Louis, and less than 3 hours from Des Moines. The Quad Cities is home to St. Ambrose University among 8 educational institutes. Major outdoor summer music festivals include the Bix Beiderbecke Memorial Jazz Festival, Mississippi Valley Blues Festival, and River Roots Live.
