Engineering Jobs in Bellflower California

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our shipping department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Warehouse Associate to join our Shipping Department team. As a Warehouse Associate, you will play a crucial role in ensuring the efficient and accurate processing of outgoing orders and shipments. Your attention to detail, strong organizational skills, and commitment to teamwork will contribute to the success of our shipping operations.

Key Responsibilities:

- Prepare and pack orders for shipment, ensuring accuracy and completeness of items.

- Utilize shipping software and equipment to generate shipping labels, packing slips, and other required documentation.

- Conduct quality checks on outgoing orders to ensure they meet company standards.

- Collaborate with other team members to prioritize orders and shipments based on deadlines and customer requirements.

- Operate forklifts and other warehouse equipment safely and efficiently.

- Maintain a clean and organized work area, following company guidelines for warehouse organization.

- Assist in receiving and inspecting incoming shipments when necessary.

- Communicate effectively with the team and supervisors, providing updates on order status and potential issues.

Qualifications:

- High school diploma or equivalent.

- Previous experience in a warehouse or shipping environment preferred, but not required.

- Forklift certification is a plus.

- Ability to lift and move packages (up to 50 pounds).

- Strong attention to detail and accuracy.

- Basic computer skills, including experience with shipping software.

- Excellent communication and teamwork skills.

- Willingness to learn and adapt to changing tasks and priorities.

- Ability to work in a fast-paced and physically demanding environment.

- Reliable and punctual with a strong work ethic.

We provide a comprehensive benefits package, including health insurance, a profit-sharing plan, paid time off, and more.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) “5S”. Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our inventory department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Inventory Associate to join our Inventory Department team. You will play a crucial role in maintaining accurate inventory records, ensuring the availability of products, and optimizing inventory levels. This role requires strong analytical skills, attention to detail, and the ability to work collaboratively with various departments.

Key Responsibilities:

· Monitor and maintain inventory levels to ensure adequate stock availability

· Conduct regular inventory audits and reconcile discrepancies

· Coordinate with suppliers and vendors to manage incoming shipments and deliveries

· Implement and improve inventory management systems and processes

· Generate and analyze inventory reports to identify trends and areas for improvement

· Assist in the development and implementation of inventory control strategies

· Operate forklift and other warehouse equipment safely and efficiently

Qualifications:

· High school diploma or equivalent

· Previous experience in a warehouse or shipping environment preferred, but not required

· Forklift certification is a plus

· Ability to lift and move packages (up to 50 pounds)

· Strong attention to detail

· Basic computer skills, including experience with excel, inventory software or WMS, are a plus

· Excellent communication and teamwork skills

· Ability to work in a fast-paced and physically demanding environment

· Strong analytical and problem-solving skills

· Reliability and punctuality with a strong work ethic

· Excellent organizational and time management abilities

· Effective communication and interpersonal skills

· Ability to work independently and as part of a team

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our customer solutions department for a Technical Product Support Specialist.

• Pay range is $20-35/hr (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

Job Description:

• Serve as the first point of contact for technical inquiries via phone, email, live chat, or a ticketing system.
• Troubleshoot and resolve basic product issues related to installation, configuration, and performance for products such as LED fixtures and lighting control systems.
• Provide pre- and post-sales technical support to sales teams and end-users.
• Document customer interactions, troubleshooting steps, and resolutions clearly and accurately within a ticketing system.
• Escalate complex or unresolved issues to engineering teams and track their progress until resolution.
• Maintain and update internal knowledge base articles and documentation for common issues and solutions.
• Identify errors or omissions in customer facing documentation and work with relevant departments to resolve or improve.
• Stay up-to-date with new product launches, technical specifications, and industry standards by participating in regular training sessions.
• Assist with other technical and product-related tasks as assigned, such as creating wiring diagrams or conducting customer training.
• Assist with onsite customer service visits if required.

Requirements:

• Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred.
• Experience: 1+ years of experience in a customer-facing role, preferably in a technical support, customer service, or inside sales position.
• Technical knowledge: Basic understanding of electrical systems, LED lighting, and common troubleshooting techniques is highly desirable. Experience with lighting control systems (e.g., DMX, 0-10V, smart home controls) is a plus.
• Customer service skills: Proven ability to provide excellent service and maintain a positive, patient, and professional attitude, especially during stressful situations.
• Communication: Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical users.
• Problem-solving: Strong analytical and diagnostic skills with keen attention to detail.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.

Essential Responsibilities

• 
  
• Support the highest standards of safety and environmental practices.
  
• Deburr machined components for sharp edges.
  
• Hand blend machined and welded surfaces to drawing requirements.
  
• Hand abrade components to desired finish for weld.
  
• Clean components and assemblies per drawing and/or manufacturing work instructions.
  
• Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
  
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
  
• Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
  

$23-$26 per hour

• High school diploma or General Education Degree (GED).
• Aerospace manufacturing experience preferred.

This position is currently accepting applications.

Apply Now

Late Shift Machinist - Full Time - Santa Fe Springs, CA

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Machinist and help us take our Service Center to the next level.

In this role you will be accountable for:

* Performing layouts, setting up and operating conventional machine tools as required

* Reading and interpreting all drawings, including geometric dimensioning and tolerancing

* Designing setup methods where none exist

* Instructing other shop personnel on proper machining techniques

* Continually improving methods to deliver higher quality with improved costs

To succeed in this role, you will need:

* Completion of a machinist apprentice program or equivalent training

* Ability to hold close tolerances and conduct component inspections

* Ability to setup machine tools: ID / OD Grinders, Turret Lathe, Engine Lathe, Horizontal Boring Mill, Vertical Boring Mill, Radial Drill, Planer Mill

* Four years of experience in machine shop operations

* Willingness to work in a team environment

* Openness to working overtime as required

If you're a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career!

Your benefits:

* 15 days of paid time off and 11 company-paid holidays

* 401k plan with a 6% match

* Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability

* Motivating wellness program

* Employee Assistance Program

Location: We are based in Santa Fe Springs, CA.

We are looking forward to hearing from you!

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

82% of our employees recommend Sulzer as a good place to work - so come and join our story, starting today!

**Why WWT?**

Founded in 1990, World Wide Technology (WWT), a global technology solutions provider leading the AI and Digital Revolution, with $20 billion in annual revenue, combines the power of strategy, execution and partnership to accelerate digital transformational outcomes for large public and private organizations around the world. Through its Advanced Technology Center, a collaborative ecosystem of the world's most advanced hardware and software solutions, WWT helps customers and partners conceptualize, test and validate innovative technology solutions for the best business outcomes and then deploys them at scale through its global warehousing, distribution and integration capabilities.

With over 10,000 employees and more than 55 locations around the world, WWT's culture, built on a set of core values and established leadership philosophies, has been recognized 13 years in a row by Fortune and Great Place to Work for its unique blend of determination, innovation and **creating a great place to work for all.**

Want to work with highly motivated individuals on high-performance teams? Join WWT today!

**Why should you join the Federal team?**

As a Client Executive, you will support our rapidly expanding Federal team. The Federal Sales team is providing mission-aligned strategies to ensure the customer is identifying the right solutions to solve their technology challenges.

**What will you be doing?**

We are looking for a Client Executive to join our Federal team within Public Sector. We're looking for a self-motivated and driven individual who will be responsible for collaborating with cross-functional teams inside the company, including Sales, Engineering, Marketing, Operations and Services on the execution of a business plan focused on growth and customer success. The Client Executive will effectively leverage their extensive relationships to build a business focused on market relevant solutions including Infrastructure Modernization, Multi-Cloud Architecture, Security, and Digital Transformation.

**Responsibilities:**

Build brand awareness and market momentum focused on quality pipeline development by leveraging innovative products and services capable of transformative solutions.

+ Lead the mission for WWT as a member of our Federal Sales team by pursuing and driving strategic programs in strategic Accounts.

+ Drive sales achievement through accurate forecasting and execution on calculated areas; assist team with deal program qualification & strategy to promote sales attainment numbers.

+ Strategic account planning, plan execution and competitive market positioning of WWT to ensure alignment of current and future business opportunities.

+ Work with various WWT team members on business solutions which will both enhance WWT's role with our customers as well as drive profitability.

+ Engage our company \"Subject Matter Experts\" to create integrated solutions that address the customer's complex problems.

+ Enable formal RFP strategies.

+ Develop creative, new, Account specific service offerings and solutions by delivering innovative presentations of solutions or proposals that address customers' challenges.

+ In partnership with internal stakeholders, perform proposal, contract review, development, and negotiations.

+ Opportunity pricing and financial modeling.

+ Develop and maintain strategic relationships with key OEM's (Cisco, NetApp, DELL, VMware, etc.) and service providers/partners.

+ Solid existing executive relationship-building and a track record of performance within the Federal Sales market.

+ Candidate should have 8+ years' selling experience.

+ Candidate will preferably reside in close proximity to Colorado Springs, CO.

+ Forward thinking professional with proven success driving Federal Sales vertical specific business and mission solutions in Infrastructure Modernization, Multi-Cloud Architecture, Security and Digital Transformation.

+ Solid analytical and problem-solving skills.

+ Exceptional organizational, communication, presentation, collaboration, and leadership skills.

+ Flexible schedule with the ability to travel as needed.

+ Bachelor's Degree or equivalent industry experience preferred.

**Want to learn more about Public Sector? Check us out on our platform:**

** **

Certain states and localities require employers to post a reasonable estimate of salary range. A reasonable estimate of the current base pay range for this position is $120,000.00 to $175,000.00 annually. Actual salary will be based on a variety of factors, including shift, location, experience, skill set, performance, licensure and certification, and business needs. The range for this position in other geographic locations may differ. Certain positions may also be eligible for variable incentive compensation, such as bonuses or commissions, which are not included in the base pay.

The well-being of WWT employees is essential. So, when it comes to our benefits package, WWT has one of the best. We offer the following benefits to all full-time employees:

+ Health and Wellbeing: Health, Dental, and Vision Care, Onsite Health Centers, Employee Assistance Program, Wellness program

+ Financial Benefits: Competitive pay, Profit Sharing, 401k Plan with Company Matching, Life and Disability Insurance, Tuition Reimbursement

+ Paid Time Off: PTO and Sick Leave (starting at 20 days per year) & Holidays (10 per year), Parental Leave, Military Leave, Bereavement

+ Additional Perks: Nursing Mothers Benefits, Voluntary Legal, Pet Insurance, Employee Discount Program

We strive to create an environment where all employees are empowered to succeed based on their skills, performance, and dedication. Our goal is to cultivate a culture of belonging that encourages innovation, collaboration, and respect for all team members, ensuring that WWT remains a great place to work for All!

If you have any questions or concerns about this posting, please email .

WWT will consider for employment, without regard to disability, a disabled applicant who satisfies the requisite skill, experience, education, and other job-related requirements of the job and is capable of performing the essential requirements of the job with or without reasonable accommodation. World Wide Technology is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or other characteristics protected by law. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please call 1-8 and ask for Human Resources.

• Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.
• Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.
• Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.
• Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.
• Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.
• Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.
• This job description is not all inclusive of all duties. Other duties may be assigned.

• Requires High School degree or GED. Related AA or trade school degree preferred.
• Requires 2+ years of related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management.
• US Citizenship or permanent residency.

• ASQ Certified Quality Inspector preferred
• Experience working in AS9100 production environment preferred
• Must be able to read and analyze engineering drawings and blueprints to determine requirements.
• Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.
• Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
• Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
• Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
• Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
• Must be familiar with AS9102 standards and software, and military specifications.
• Experience using Net-Inspect standards and software preferred.
• Must interface effective across organizational levels.
• Must have good organizational skills and maintain accurate, complete documentation.
• Must have excellent communication skills, both written and oral.
• Must be proficient with the use of the Internet, MS Word/Outlook.

• N/A

• Lift up to 50 lbs.
• Push and pull 50 lbs.
• Bend Occasionally
• Sit, Stand, and Walk Frequently

• Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
• ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.

Faraday Future (FF) is a California-based mobility company, leveraging the latest technologies and world's best talent to realize exciting new possibilities in mobility. We're producing user-centric, technology-first vehicles to establish new paradigms in human-vehicle interaction. We're not just seeking to change how our cars work we're seeking to change the way we drive. At FF, we're creating something new, something connected, and something with a true global impact.

We are seeking a strategic and driven Senior Manager, Product Marketing to lead our go-to-market efforts for the next generation of luxury electric vehicles. This pivotal role bridges product innovation and customer storytellingbringing together market insight, technical knowledge, and customer experience to deliver impactful marketing strategies and product launches.

• Lead market and user research to define luxury EV buyer personas and decision-making journeys.
• Monitor industry and technology trends, including global EV policy developments, charging infrastructure evolution, and competitor moves in pricing and innovation.

• Develop comprehensive, full-funnel marketing strategies across the product lifecyclefrom awareness and pre-order to delivery and ownership.
• Craft compelling value propositions and translate technical features into clear, customer-centric benefits.
• Partner with product, design, and regional teams to support international market entry strategies.

• Lead cross-functional go-to-market planning and execution, ensuring alignment across product, manufacturing, sales, and communications.
• Build sales enablement materials including competitive battle cards, product configurator guides, and training decks.
• Support launch event planning and coordination, from strategy to messaging alignment.

• Define and track key performance indicators (KPIs) such as brand awareness, lead-to-order conversion, and customer retention.
• Conduct A/B testing and marketing ROI analysis to refine messaging, channels, and investment strategies.
• Document learnings and develop repeatable GTM playbooks for future product launches.

• 10+ years of experience in product marketing within automotive, electric vehicles, luxury consumer goods, or tech hardware industries.
• Proven track record managing complex product launches under tight timelines in fast-paced environments.
• Strong command of customer segmentation, go-to-market strategy, and sales enablement.
• Analytical mindset with experience in ROI measurement and marketing optimization.
• Excellent verbal and written communication skills with a knack for storytelling and translating complexity into clarity.
• Bachelor's degree in Marketing, Business, Engineering, or a related field.

• Startup or hyper-growth company experience.
• Familiarity with international markets, especially North America and China.
• Passion for sustainability, design, and innovation in the mobility sector.

($145K - $175K DOE), plus benefits and incentive plans

• Healthcare + dental + vision benefits (Free for you/discounted for family)
• 401(k) options
• Casual dress code + relaxed work environment
• Culturally diverse, progressive atmosphere

Faraday Future is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

About the Company:

The company is a leading metal additive manufacturing (AM) partner for aerospace and defense organizations. They design, optimize, and produce mission-critical hardware that enables customers to leverage AM technologies in ways previously thought impossible. Their team supports cutting-edge programs across aviation, space, and national defense, delivering engineering excellence from concept through production.

About the Role:

The Principal Additive Manufacturing Engineer – Applications is a senior, customer-facing technical authority. You will work directly with aerospace and defense primes, OEMs, and government organizations to guide AM strategy, influence design decisions, and deliver advanced metal AM solutions for high-stakes missions. This role operates at a peer-to-peer level with senior customer engineers and plays a key part in shaping the future of AM adoption across critical defense and aerospace programs.

What You'll Do:

• Serving as the senior technical lead and trusted advisor for key aerospace and defense programs.
• Leading AM strategy, qualification plans, and adoption pathways across complex customer missions.
• Running technical design reviews, engineering workshops, and program strategy sessions with customer leadership.
• Translating mission and performance requirements into optimized metal AM solutions that balance cost, risk, and reliability.
• Developing high-impact proposals, white papers, and technical recommendations for advanced AM applications.
• Driving implementation of DfAM best practices, simulation-based optimization, and qualification approaches for mission-critical hardware.
• Working cross-functionally with business development, manufacturing, and quality teams on capture strategies and program execution.
• Acting as the primary technical interface from concept through qualification and production.
• Mentoring engineers and elevating the organization's customer-facing AM technical depth.
• Ensuring compliance with aerospace standards: AS9100D, NADCAP, MIL-SPEC, ITAR, and other regulatory requirements.

What You Need to Bring:

• Recognized expertise in metal additive manufacturing for aerospace and defense applications.
• A proven ability to influence design, qualification, and engineering decisions at primes, OEMs, and government agencies.
• Deep knowledge of LPBF/DMLS, DED, and hybrid AM processes and relevant alloys (Ti, Ni, Al, Cu).
• Strong background in aerospace materials science, metallurgy, and thermal-mechanical behavior of AM components.
• Proficiency in CAD (NX preferred), AM simulation tools, and FEA, with the ability to present technical findings clearly.
• Demonstrated success presenting to executive and non-technical customer stakeholders.
• Understanding of AS9100D, NADCAP, MMPDS, MIL-SPEC, and aerospace certification and qualification pathways.
• Leadership skills to mentor and guide engineering teams in both technical execution and customer engagement.
• Bachelor's degree required (Mechanical, Aerospace, or Materials Engineering).
• Master's degree preferred.
• 10+ years in aerospace/defense AM engineering, advanced design, or manufacturing applications.
• Eligibility to obtain and maintain a DoD SECRET Security Clearance (required for employment).

Benefits:

• Comprehensive medical, dental, and vision insurance
• 401(k) retirement plan
• Dynamic, collaborative culture focused on innovation and professional growth

Why Join:

Join a team that's redefining aerospace and defense manufacturing through innovation, collaboration, and purpose. Here, you'll:

• Work on real flight hardware that supports next-generation space and defense missions.
• Be part of a fast-growing, hands-on engineering culture where your ideas make an impact.
• Collaborate with experts across design, materials, and production to advance the frontiers of metal 3D printing.
• Access career development opportunities, advanced AM technologies, and a mission-driven environment that values curiosity and continuous learning.

Eleven Recruiting is hiring an experienced Senior Quality Engineer to join one of our largest aerospace companies sitting onsite in Bell Gardens, CA. This role will manage all Quality Assurance activities related to the plating process, ensuring compliance with industry standards and driving continuous improvement initiatives. The Quality Engineer will collaborate with internal teams, suppliers, and customers to address and resolve quality issues, maintain efficient inspection processes, and contribute to the overall excellence of our quality management system.

Responsibilities:

• Develop and implement quality processes to reduce plating defects and meet flow-down requirements.
• Lead rejection reviews and non-conformance investigations, collaborating with internal teams, suppliers, and customers.
• Perform root cause and corrective action analysis (RCCA) using industry-standard tools.
• Drive improvement initiatives using Lean and Six Sigma methodologies.
• Maintain QMS documentation and train teams on ISO9001, AS9100, IATF 16949, and Nadcap AC7108 compliance.
• Conduct internal audits and support external audits to maintain certification standards.
• Develop and oversee inspection processes for incoming, in-process, and final stages.
• Prepare and maintain standard work instructions, process control plans, and core automotive tools (e.g., APQP, PPAP, FMEA).
• Analyze data trends to identify opportunities for improvement and optimize quality metrics.
• Manage supplier quality surveys and maintain the Approved Suppliers List.
• Work as an active team member to address quality issues, enhance productivity, and foster continuous improvement.

Qualifications:

• Bachelor's degree in science, technology, engineering, mathematics, or relevant industry experience.
• Minimum of 5 years of experience as a Quality Engineer, preferably in aerospace manufacturing within an AS9100-based QMS environment.
• Strong expertise in data analysis, problem-solving, and statistical techniques.
• Proficient in interpreting technical information such as blueprints, schematics, and technical specifications.
• Experience drafting technical documentation and instructions to support QMS activities.
• Knowledge of contract review for new product introductions and RMA processes.
• Familiarity with quality and manufacturing metrics, including SPC.
• Internal audit experience with ISO9001, AS9100, and/or IATF16949 standards.
• Basic understanding of Nadcap Chemical Processing requirements.
• Prior experience in plating shop operations is highly desirable.

Salary: $100,000 - $120,000

*This role is currently based in Commerce, CA.

Cross Brothers Manufacturing

Company Overview

Cross Brothers Manufacturing is a rapidly growing fabrication and electrical infrastructure manufacturing company serving utilities, OEMs, and electrical contractors across the Western United States. The company is a portfolio investment of TBG Equity, a private investment firm focused on building and scaling industrial and infrastructure manufacturing businesses.

Our products support the expansion of the electrical grid and industrial infrastructure, including utility structures, enclosures, and custom fabricated components.

Demand for our products is increasing as electrification, AI infrastructure, and data center growth drive massive expansion of the electrical grid.

We encourage candidates who enjoy solving operational problems and building systems in fast-growing environments to apply.

Benefits & Perks

·      Fully paid medical benefits

·      401k matching

·      Generous Paid Time Off and Holidays

Compensation & Growth Path

·      Base salary expected to be in the range of $100,000 – $130,000, depending on experience.

·      This role is also eligible for performance bonuses tied to operational improvements and company growth.

·      Cross Brothers leadership participates in a shared bonus pool tied to company performance, which this role will have the opportunity to join as responsibilities expand.

·      As the company grows, this position is expected to evolve into Director of Operations, with responsibility for broader operational leadership.

·      Top performers may also have the opportunity to participate in long-term incentive programs, including potential equity participation, as the company scales.

About the Position – Operations & Systems Manager

Cross Brothers is entering a rapid growth phase as demand for electrical infrastructure equipment accelerates across the United States.

The company is currently expanding production capacity, launching a second shift, and preparing for a facility relocation to support continued growth.

This role offers a rare opportunity to help build the operational foundation of a growing manufacturing platform, working directly with leadership to improve manufacturing systems, implement new technology, and scale production capacity.

The successful candidate will play a key role in helping the company evolve from a traditional fabrication shop into a modern, data-driven manufacturing organization while working closely with leadership to shape how the business scales operationally.

Role Mission

The Operations & Systems Manager will help transform Cross Brothers from a traditional fabrication shop into a scalable, data-driven manufacturing platform.

This role will work directly with the CEO and leadership team to build operational systems, improve shop-floor processes, implement automation and AI tools, and support the company’s next phase of growth.

This is a hands-on role inside the factory environment, working closely with production, finance, engineering, and leadership to improve efficiency, throughput, and operational visibility.

Key Responsibilities

Operational Systems

• Implement and refine work order tracking and production systems
• Develop operational dashboards and KPIs
• Track labor efficiency across cutting, bending, welding, and assembly
• Identify production bottlenecks and process improvement opportunities

Manufacturing Process Improvement

• Improve production scheduling and workflow coordination
• Support second shift production ramp
• Reduce rework, delays, and operational waste
• Assist with facility layout and production flow improvements for our upcoming facility move

Technology & Automation

• Evaluate and implement automation and AI tools for operations
• Improve digital workflows across quoting, engineering, and production
• Help modernize internal systems and reporting

Operational Execution

• Support daily shop-floor operations
• Coordinate between engineering, finance, production, and leadership
• Assist leadership in scaling operational capacity as demand grows

Ideal Candidate

We are looking for a highly analytical, hands-on operator who enjoys solving complex operational problems.

Strong candidates may come from backgrounds such as:

·      Operations or manufacturing roles

·      Industrial engineering

·      Operations consulting

·      Supply chain optimization

·      MBA programs with operations focus

The ideal candidate will be:

·      Extremely analytical and systems-oriented

·      Comfortable working in a manufacturing environment

·      Comfortable working in both the office and on the shop floor

·      Curious about technology and AI tools

·      Proactive and solutions-driven

·      Eager to grow with a fast-scaling company

Location

This role is currently based at our manufacturing facility in Commerce, California.

As the company continues to grow, we expect to relocate to a larger facility within the next 9–12 months, likely in Orange County or the Inland Empire.

Work Schedule

This role works closely with production teams and requires an early start to support daily shop-floor operations.

Typical hours begin around 6:30–7:00 AM.

The Director of Manufacturing will lead the production, planning, quality inspection and inventory control teams and work with the test and engineering teams for successful LRIP (Low-Rate Initial Production) of our Subsurface Compressor Systems; perform cost reduction; improve productivity, ensure quality builds; and ensure deliveries are made on time.

Essential Duties and Responsibilities:

1. Lead and direct the manufacturing team to meet delivery commitments.
2. Develop and maintain the Master Production Schedule; identify risks and take mitigating actions to address them preemptively.
3. Ensure production builds meet delivery, design, quality and forecasted budget.
4. Drive the S&OP forecasting process based on sales outlook, fleet support and internal usage.
5. Maintain spare part requirements for the operating fleet including R&D. Drive the S&OP process through purchase approvals.
6. Institute plans to improve productivity, reduce build costs and execute high quality builds. Continue to implement KPIs for these and define and track performance metrics, including OTTR and forecast accuracy.
7. Initiate NCR and follow through to closure to correct and prevent re-occurrence of manufacturing issues.
8. Verify quality traceability in the production management systems per ISO 9001
9. Ensure build procedures are consistently followed and operators are trained.
10. Build hardware failure contingency plans for production work and field support to reduce delivery risk and lead times
11. Implement 5S, including a special focus on safety assessment and PPE.
12. Assist in dispositioning discrepant material and ensuring engineering intent is met in the manufacturing process.
13. Contribute to and comply with ISO9001.

Skills, Experience, Education, and Abilities:

• BS degree in a technical field (Manufacturing, Industrial or Mechanical Engineering preferred) or equivalent combination of education/experience.
• A minimum of 7 years progressive and related experience required.
• Demonstrated ability to support hands-on decision making, management, mentoring and development of technicians and engineers in a highly collaborative environment.
• Ability to read prints and familiar with interpretation of GD&T call outs.
• Strong understanding of geometric tolerancing per ASME Y14.5, dimensional stack-ups, inspection procedures and metrology equipment.
• Experience building turbomachinery, which includes high-speed rotating equipment, electric motors, compressors and oil management systems.
• Familiar with creating ERP system BOM’s & Routers; experience with Global Shop is a plus.
• Knowledge of standard manufacturing processes for complex, precision turbo machinery: casting, machining, milling, grinding, rotor balancing, mechanical and electrical assembly, inspection techniques, oil management systems (tubing, fittings, etc.) and pressurized assemblies.
• Experience with NPI of complex equipment.
• Kaizen, 5S, Six Sigma, Demand Flow Technology, Lean Manufacturing, ISO 9001 experience is a plus.
• Experience configuring assembly lines, in-process Kanban’s and visual work instructions is a plus.
• Good interpersonal and interfacing skills (i.e. communicating well with people across different departments both internally and externally)
• Additional computer skills: Microsoft Office Suite

Intangibles Sought:

• Able to exercise independent judgment and make decisions on technical issues.
• Ability to establish positive rapport with individuals at all levels of organization.
• Ability to motivate working team through leadership and “can do” attitude.
• Self-awareness; not afraid to ask for help or admit error.
• Willingness to engage in constructive debate.
• Ownership, initiative and accountability.
• Flexibility in range of responsibilities.

Supervisory Responsibilities:

Position will lead the manufacturing team. Position will be responsible for directing and coordinating activities of others to meet company objectives.

Physical Demands / Work Environment:

Time will be split between office and shop floor. Personal protective equipment, such as safety glasses, gloves, or masks may be required in some assembly areas. Some travel will be required as needed for vendor visits/qualifications.

AppleOne is partnering with an industry leader in custom chemical formulation and manufacturing based in Santa Fe Springs, CA. This organization serves as a critical partner to various industries, delivering high-quality, precision-engineered chemical solutions. Known for a culture of safety and reliability, they provide a dynamic environment where team members are empowered to take full ownership of the customer experience.

We are seeking a Sales Support Specialist for a full-time, onsite role. This position serves as the vital link between customers, Account Managers, vendors, and internal production teams. You will ensure that orders move accurately and efficiently while maintaining high standards of quality and safety. This role is highly suitable for a detail-driven professional who thrives in a fast-paced, evolving atmosphere and is motivated by the direct impact their work has on business success.

• Industry: Chemical Manufacturing / Industrial Solutions
• Job Function: Sales Support / Order Management
• Employment Type: Direct Hire
• Pay Rate: $24.00 – $27.00 per hour (Based on experience and skills)
• Workplace Type: 100% Onsite (Santa Fe Springs, CA)

Core Responsibilities

• Customer Advocacy: Serve as the primary point of contact for customer and Account Manager needs regarding order status and logistics.
• Order Management: Manage the full lifecycle of customer orders within the ERP system, ensuring accuracy from initial entry through final completion.
• Data Integrity: Maintain highly accurate documentation, pricing records, and customer/product profiles to ensure seamless internal transitions.
• Cross-Functional Coordination: Collaborate with vendors and internal departments to resolve issues and align production with customer expectations.
• Process Ownership: Proactively identify and resolve potential order hurdles to maintain customer trust and operational flow.

Required Qualifications

• Experience: 3 to 5 years of experience in sales support, customer service, or order management, preferably within a manufacturing or industrial environment.
• Technical Skills: Very strong proficiency in ERP systems and Microsoft Office Suite.
• Communication: Ability to communicate clearly and professionally with a variety of internal and external stakeholders.
• Adaptability: A strong ability to adjust to shifting priorities and changing customer needs in a high-volume environment.
• Accountability: A track record of taking ownership of outcomes and following through on complex tasks from start to finish.

POSITION DESCRIPTION

This position is responsible for day-to-day compliance of safety programs and related activities at the Vernon, CA facility.

Responsibilities:

• Environmental Compliance Programs:Ensure operations are compliant with applicable federal, state, and local regulations.
• Conduct audits and training programs as needed.
• Establish a working relationship with appropriate regulatory agency personnel.
• Generate reports and permit applications (air, water, waste), ensure compliance with applicable permit requirements.
• Review proposed manufacturing changes and assess environmental impact.
• Work to reduce waste generation and support any remediation activities under the direction of the Corporate HSE Director and Regional HSE Manager.
• Health and Safety Programs:Have oversight of Industrial Hygiene, Fire Prevention LOTO, PPE, etc. Ensure that programs are in place to assist in meeting Company objectives.
• Ensure training programs and in place to ensure compliance.
• Implement accident, near miss, and observation reporting programs to proactively manage safety performance.
• Lead root cause analysis investigation and manage documentation confirm corrective actions have been put in place ensuring complete case management of injuries (reporting, workers compensation, return to work, etc.).
• Build communications required to present incident details and corrective action plans to diffident levels of the business.
• Ensure Job Safety and Environmental Analyses/Job Hazard Analysis are being conducted as required.
• Evaluate operational practices to determine methods to eliminate workplace hazards.

Qualifications:

• Bachelor’s degree in Health & Safety or the Sciences
• Min of 3+ years of Health & Safety experience 2 years in a manufacturing environment.
• Experience with OSHA, LOTO, Root Cause Analysis
• Union experience a plus
• Needs to have occasional flexibility on start time.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come.  

Position: Senior Technical Sales Representative
Location: US – Remote West Coast

Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) – Generous Company Match!
Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities.  

Hours of work: Full-time position with hours Monday - Friday, typically 8:30 AM - 5:00 PM
Travel: 50%; air, automobile, and overnight travel to visit customer sites, and company meetings

Responsible for the sale of activated carbon, equipment and services as well as growing and maintaining current business relationships within the defined geographical and/or market specific territories. This position is responsible for municipal and/or industrial sales for various markets such as environmental, chemical, food, drinking water, wastewater, groundwater, and process applications, and requires selling/influencing decision makers in procurement, operations, management, consulting engineers, general contractors, etc. Typical territory revenue responsibility $12-$20 MM (not confined to this range).  This role has more autonomy for managing his/her territory than the TSR IV role.

Duties and Responsibilities (not limited to)
 

• Prepare and document all sales proposals and customer communications as required by the company and business unit directives. This will include the use of GCRM to record and share meaningful customer and market information, bid results, competitive pricing, and other relevant activities
• Update sales forecast on a regular basis
• Keep the manager informed of all activities, including business threats and opportunities, in the assigned customer and market territory
• Assist with Accounts Receivables as needed
• Expand and strengthen the assigned business portfolio by driving strategic growth initiatives and cultivating high-value relationships across target markets
• Identify and secure new opportunities through proactive engagement, market intelligence, and alignment with organizational objectives
• Deliver exceptional customer service by maintaining a deep understanding of client needs and industry trends
• Build trusted, multi-level relationships with key stakeholders across consulting engineering firms, utilities, and manufacturing companies, ensuring tailored solutions and long-term value through best-in-class business practices
• Conduct all activities with a strong commitment to health, safety, and environmental awareness
• Promote safe business practices through professional behavior and by supporting company policies and standards in interactions with customers, partners, and colleagues
• Attend and be involved with market specific conferences and organizations
• Influence/Drive the creation of marketing collateral through communication of market specific needs
• Coordinate and participate in webinars, seminars and/or Lunch and Learns, as needed, to educate customers, prospects, engineering firms, and other stakeholders
• Responsible for the achievement of geographical territory annual sales, profit, and other plan goals
• Conduct regular outbound sales calls to prospect, qualify, and nurture leads, ensuring a full and healthy sales pipeline
• Initiate follow-up calls with prospective and existing clients to build relationships, address needs and advance opportunities through the sales cycle
• Assigned to special projects or initiatives on an as-needed basis
• Organize and/or present relevant technical-based presentations to customers, engineering firms and other market influencers or stakeholders
• Execute market strategies to strengthen Calgon Carbon’s position versus the competition
• Conduct activities in accordance with the marketing plan and sales strategies for assigned customer and market responsibilities
• Actively participate in training activities
   

Qualifications

• A Bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required
• An MBA is preferred
• 7-10 years of Technical Sales Experience is required
• Experience in chemical manufacturing/industrial sales is preferred

More about Calgon Carbon, A Kuraray Company 

We are a company of scientific innovators with over 205 patents. For over 75 years, we’ve been innovating solutions to the world’s emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon’s product portfolio now encompasses more than 700 direct market applications. 

Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. 

Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. 

Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

PIa0921025d61c-3631

The Assistant Controller plays a critical role in supporting Finance Director in managing accounting operations for two Business Units. This position focuses on inventory control, cost accounting, and audit compliance, ensuring accurate financial reporting and adherence to industry standards. The role requires strong analytical skills, attention to detail, and the ability to work collaboratively across departments.

Pay Range: $105,000.00 to $135,000.00 per year. Final compensation will be based on experience and qualifications.

Essential Duties and Responsibilities

This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

• 
  
• Inventory & Cost Accounting
  
  
  • 
    
  • Oversee inventory accounting processes, including valuation, reconciliation, and reporting.
    
  • Maintain and analyze costs, variances, and manufacturing overhead allocations.
    
  • Partner with operations and supply chain teams to ensure accurate inventory tracking and cost control.
    
  
  
  
• Program Finance & EAC Management
  
  • 
    
  • Collaborate with Program Managers to monitor program financial performance.
    
  • Review Estimate at Completion (EAC) reports, ensuring accuracy and alignment with program budgets.
    
  • Track program costs, revenue recognition, and margin analysis for long-term contracts.
    
  • Provide financial insights to support program decision-making and risk mitigation.
    
  
  
  
• Financial Reporting & Compliance
  
  • 
    
  • Prepare and review monthly, quarterly, and annual financial statements in accordance with GAAP.
    
  • Ensure compliance with internal policies, SOX requirements, and external regulations.
    
  • Support internal and external audits, providing documentation and resolving inquiries.
    
  
  
  
• Accounting Operations
  
  • 
    
  • Manage general ledger activities, including journal entries and account reconciliations.
    
  • Oversee accounts payable, accounts receivable, and payroll functions as needed.
    
  • Assist with month-end and year-end close processes.
    
  
  
  
• Budgeting & Forecasting
  
  • 
    
  • Contribute to annual budgeting and periodic forecasting processes.
    
  • Provide cost analysis and variance reporting to support decision-making.
    
  
  
  
• Process Improvement & Systems
  
  • 
    
  • Identify opportunities to streamline accounting processes and improve efficiency.
    
  • Support ERP system enhancements and automation initiatives.
    
  
  
  
• Team Leadership
  

Supervise and mentor accounting staff, fostering a culture of accuracy and accountability.

• Strong background in inventory management, cost accounting, and audit support.
• Bachelor's degree from an accredited institution in Finance or Accounting.
• Formal training and in-depth experience in cost accounting, financial accounting, local, state, and federal tax regulations, and financial analysis & reporting.
• Minimum 5 years of accounting experience.

Desired Qualifications

• Manufacturing environment

• Strong analytical and evaluative skills
• Developed written and oral communication skills
• Strong interpersonal skills as this team member will interact frequently with personnel outside of accounting and finance department.
• Strong decision-making skills: incumbent needs to analyze and synthesize data, and be able to make decisions without having complete information
• Expert user of Microsoft Office products

Additional Eligibility Qualifications

The Company will only employ those who are legally authorized to work in the United States for this opening. US Citizenship or Permanent Residence (Green Card) is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Candidate must also pass a basic visual acuity exam.

This position is currently accepting applications.

Apply Now

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies.

Pay Range: $40 to $60 per hour.

• Weld, assemble, and fabricate various propellant space tank systems and sub-assembly components using GTAW (TIG) welding methods
• Use precision-calibrated tools such as torque wrenches, micrometers, and calipers to ensure quality and accuracy
• Perform work in accordance with detailed procedures, specifications, and test instructions
• Read and interpret technical drawings and manufacturing work instructions
• Utilize various mechanical tools and equipment with minimal supervision
• Operate forklifts, overhead cranes, and other heavy equipment safely
• Perform surface preparation processes such as blending, filing, and abrading of flight hardware
• Maintain a clean and organized workspace, ensuring compliance with safety standards
• Support team members with additional duties as required to ensure efficient operations

Qualifications:

• Minimum 5 years of aerospace welding experience
• High school diploma or GED required
• Technical training or certification in TIG welding
• Understanding of GTAW techniques and material weldability
• Ability to read blueprints or technical drawings
• Willingness to learn and follow precise instructions and procedures
• Strong attention to detail and pride in workmanship
• Ability to work well in a team and communicate effectively
• Comfortable working with hand tools and shop equipment
• Forklift or crane certification is a plus

Work Environment:

• Aerospace clean room and shop environment
• Exposure to high-precision components and tight tolerances
• Regular lifting of up to 50 lbs and standing for extended periods

This position is currently accepting applications.

Apply Now