Engineering Jobs in American Fork Utah Remote
192 positions found
Schedule is Monday thru Friday Swing Shift to start at 3:30pm
This position will serve as a member of the Health, Safety & Environmental team with emphasis on General Industry Occupational health and Safety. This position will report to the HSE Supervisor. Primary responsibilities include promoting and implementing all HSE objectives including HSE programs, policies, and procedures with primary emphasis on occupational health and safety. HSE Tech II will work to establish the desired safety culture of occupational incident/injury prevention. To perform this job successfully, the incumbent must have a passion for and demonstrated commitment for workplace injury prevention and be able to carry out each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. The incumbent will have general knowledge of OSHA regulations, standard safety procedures, and best safe work practices. General knowledge of behavioral-based safety programs is a plus. Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential.
Primary Duties
Under general supervision of the HSE Supervisor, the HSE Technician II will:
Perform all work in compliance with company policy and within the guidelines of bioMerieux Quality System.
Implement and monitor the facilities health & safety programs, policies, and procedures. Collect and analyze safety incident and injury statistics in a spreadsheet format and report results to safety committee and other stakeholders.
Assist with monitoring environmental practices and permitting to ensure compliance.
Perform job safety analysis (JSA’s) and recommend corrective actions.
Conduct safety training including:
new employee safety orientation
Specific occupational health and safety topic training to individuals and groups
Compile statistics and reports relevant to safety training.
Inspect and maintain safety equipment, including fire extinguishers, safety showers/eye wash, first aid kits and AED’s.
Assist with site Safety Committee activities and Building Emergency Response Teams (B.E.R.T) as needed.
Assist with maintaining the company wide, web based chemical inventory list and Safety Data Sheet
Conduct incident investigations including root cause analysis (RCA) and recommend corrective and preventive measures.
Work closely with the continuous improvement (CI) team to implement safety related CI improvements and initiatives.
Conduct safety and environmental inspections.
Perform incident and near miss investigations.
Other duties as assigned.
Supplemental Duties
May spend workday at multiple physical locations in work environments including office, warehouse, clean space manufacturing, R&D lab and bio-chemistry. Must possess a valid Utah State driver’s license.
Some local travel is required between bioMérieux buildings (all within Salt Lake City, Utah)
Training, Education and Experience
Bachelor's degree in safety, or other technical discipline (i.e engineering, industrial hygiene, science)
In lieu of a degree, 3 or more years of relevant experience may suffice.
OSHA course certifications and practical experience in general industry occupational safety in a manufacturing or multi-functional operation.
Must have experience in training preparation and presentation to individuals and groups. Must demonstrate this ability prior to job offer.
Minimum of three years’ experience performing OSHA HSE duties in a manufacturing environment
Must have experience in training preparation and presentation to individuals and groups.
Knowledge, Skills and Abilities
Oral Communication - The ability to effectively communicate with all site personnel and regulators. This includes ability to reinforce HSE concepts and policies in a manner that promotes learning and compliance.
Written Communication – The ability to write reports, training materials, standard operating procedures, and policies.
Planning/Organizing - The ability to plan, organize, prioritize, and multi-tasks.
Reasoning - The ability to collect and accurately assemble data in a logical manner. The ability to read, analyze and interpret job related information.
Dependability – Must have timely and accurate reporting, tracking and follow-up of assignments
Computer Skills – Proficient in MS Word, MS Excel, Power Point, etc.
The incumbent will have advanced knowledge and understanding of OSHA regulations, standard safety procedures, and best safe work practices.
Advanced knowledge and understanding of behavioral-based safety programs are a plus.
Timely completion and follow-up of assigned tasks and accurate collection and tracking of required data is essential
Working Conditions and Physical Requirements
Ability to remain in stationary position, often standing, for prolonged periods.
Ability to ascend/descend stairs, ladders, ramps, and the like.
Ability to wear PPE correctly most of the day.
Ability to adjust or move objects up to 40 pounds in all directions.
Have fine motor coordination
Ability to pass respirator fit test
Ability to gown for clean room environments
The pay for this role is between $27.50 to $36.20 an hour. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bioMerieux’s bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate’s experience and will be presented in writing at the time of the offer. In addition, bioMérieux offers a competitive Total Rewards package that may include: · A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options · Company-Provided Life and Accidental Death Insurance · Short and Long-Term Disability Insurance · Retirement Plan including a generous non-discretionary employer contribution and employer match. · Adoption Assistance · Wellness Programs · Employee Assistance Program · Commuter Benefits · Various voluntary benefit offerings · Discount programs · Parental leaves #biojobs #LI-US PandoLogic. Category: , Keywords: Environmental Services Representative
Oracle Fusion Procurement Consultant
6+ Month Contract
Remote / Hybrid
We are seeking an Oracle Fusion Procurement Consultant to lead functional design, configuration, and deployment of Oracle Fusion Cloud Procurement modules as part of a migration from Oracle E-Business Suite (EBS) 12.2. This role will work closely with the Solutions Architect and OIC Architect to implement a user-friendly, compliant, and scalable procurement solution. The consultant will configure modules, design approval workflows, support end-user training, and validate business processes across Sourcing, iProcurement, Purchasing, and Contract Lifecycle Management (CLM).
Required Skills
- 5+ years of experience implementing Oracle Fusion Cloud Procurement modules
- Deep functional knowledge of Sourcing, iProcurement, Purchasing, and CLM
- Experience performing fit-gap analysis and aligning business processes with Oracle best practices
- Ability to configure catalogs, requisitions, approval workflows, and user roles
- Experience with data migration and validation for suppliers, POs, and employee hierarchies
- Strong understanding of procurement lifecycle and compliance requirements
- Experience supporting end-user training and knowledge transfer
- Strong communication and collaboration with cross-functional teams
Desired Skills
- Experience with integration touchpoints between Fusion Cloud and Oracle EBS
- Familiarity with AI-enabled procurement features within Fusion modules
- Experience with high-volume procurement environments and large-scale implementations
- Knowledge of reporting, analytics, and dashboards within Fusion Procurement
- Experience in accelerated ERP implementation timelines (6 months or similar)
Welcome to ConsultNet, a premier national provider of technology talent and solutions. Our expertise spans across project services, contract-to-hire, direct search, and managed services onshore, nearshore, and hybrid. For over 25 years, we have connected thousands of consultants with meaningful roles through a personal, communication-driven approach, partnering with a diverse client base to build high-performing teams and create lasting impact. Our comprehensive service offerings cover a wide range of technology and engineering positions across key markets nationwide. Learn more at .
We champion equality and inclusivity, proudly supporting an Equal Opportunity Employer policy. We welcome applicants regardless of Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other status protected by law.
About Kiln:
Kiln is a flex office and lifestyle brand. We deliver an exceptional experience that elevates the performance and lifestyle of our members through an ecosystem of people, products, places, and spaces.
Kiln launched in 2018 with locations in Salt Lake City and Lehi, Utah. Today, we’ve grown to 21 hubs across the Mountain West, and we’re just getting started. As a leader in the flex-office movement, Kiln is shaping the future of hybrid work in the evolving landscape of commercial real estate.
Our Core Values
1: Human at the core
2: Achieve & Celebrate Together
3: Thoughtful and with Purpose
4: Always Evolving
5: Nothing short of Extraordinary
6: Scrappy & Ingenious
Our Mission
Our mission is to change the world within the workplace, elevating the quality of life for our members and enabling teams to build in new and creative ways. Our community lifts individuals, facilitates learning, and is creating a collective that is capable of things we cannot imagine.
Role Opportunity:
We are looking for a Senior Interior Designer to help shape what Kiln looks and feels like as we grow. This role sits at the intersection of space design, workplace design, and experience design. You will help create environments that influence how people work, connect, and move through a space.
You will work closely with our Creative Director as part of a small, in-house design team responsible for bringing new Kiln locations to life. From early concepts through final installation, your work will contribute to thoughtfully designed environments that support productivity, community, and hospitality. Your work will directly influence spaces experienced by thousands of members every day.
The Role:
This is both a technical and creative role for a designer who is equally comfortable producing detailed drawing packages and developing design concepts.
You will contribute to the space design, workplace design, and experience design of new Kiln locations while helping evolve the design language of the brand.
This includes space planning, test-fitting new sites, collaborating with architectural partners, and helping deliver environments that feel cohesive, layered, and intentional.
You will also participate in the development of The Kiln Series — our proprietary furniture and componentry line, which is a key part of Kiln’s long-term design strategy.
Key Relationships
- Kiln Build and Procurement team
- External architecture, construction, and manufacturing partners
Key Responsibilities
- Work with the Creative Director to deliver new site designs for Kiln
- Develop concept design ideas and spatial concepts for new locations
- Space plan and test-fit concepts into new sites
- Manage and produce detailed drawing packages for each location
- Work closely with the build and procurement team to ensure designs are delivered on time and on budget
- Collaborate with external architectural partners to produce construction design sets, attend site meetings, and participate in final installations and fit-outs
- Contribute to the development of The Kiln Series furniture and componentry line by creating shop drawings, reviewing engineering specifications, and evaluating prototypes with manufacturing partners
- Develop interior styling concepts for Kiln spaces and support the interior styling team
- Integrate Kiln’s graphic brand identity into physical environments
- Develop a deep understanding of coworking and how members interact with our spaces
- Participate in the Kiln member community and contribute to social media or brand storytelling when appropriate
- Support additional design initiatives as directed by the Creative Director
Experience and Requirements
- 5+ years of experience in commercial interior design, workplace design, or hospitality environments
- A design sensibility that is layered, eclectic, and experience-driven rather than purely neutral or corporate
- Portfolio required demonstrating thoughtful commercial interior design work (hospitality experience highly valued)
- College graduate with a four-year degree preferred, but not required
- Highly proficient in CAD software, preferably Vectorworks
- Experience with space planning, commercial workplace design, and interior documentation
- Experience with rendering, visualization, and hand sketching for presentations
- Proficiency with Adobe Suite, Google Suite, Slack, and Asana, and comfort learning new SaaS platforms
- Understanding of ADA and commercial office code requirements
- Strong verbal and written communication skills
- Exceptional organizational and multitasking abilities across concurrent projects
- Demonstrates integrity, dependability, accountability, self-awareness, work ethic, and empathy
- Passion for and alignment with Kiln’s mission and values
- Willingness to travel. Valid passport required
What Kiln Offers
Salary: $85,000 – $100,000 depending on experience
- Supplemented Medical, Dental, and Vision coverage
- Flexible PTO + 10 paid federal holidays
- Complimentary gym membership at Kiln and partner locations
- 50% discount at Kiln cafés
- The opportunity to work within a small, creative team where your ideas matter — designing spaces from concept to completion and helping shape a design-forward brand that is still evolving
- Direct collaboration with Kiln’s Creative Director and founding team
- The ability to contribute to The Kiln Series, our proprietary furniture and componentry line
- The opportunity to see your ideas move quickly from concept to built space
- Work that blends space design, workplace design, and experience design
- The chance to shape environments that thousands of members interact with every day
- A design culture that values curiosity, craft, and thoughtful experimentation
Team Lead Staff Software Engineer
Location: Hybrid - American Fork, UT
Our client is seeking a Team Lead Staff Software Engineer to join their engineering team supporting innovative cloud-based dental technology platforms. Do you enjoy solving complex backend engineering challenges using Java and modern cloud technologies? Are you passionate about mentoring other engineers while still staying hands-on with code? Do you want to influence system architecture and help scale a high-impact SaaS platform used by dental professionals? If yes, this may be the perfect Team Lead Staff Software Engineer position for you. Keep scrolling to see what this company has to offer.
The Perks!
- Compensation: $130,000 – $165,000 salary, based on experience
- Benefits: Medical, Dental, and Vision Coverage, 401(k) Plan with Company Match, Paid Time Off, Sick Leave, Paid Parental Leave, Short Term Disability, Income Protection, Work Life Assistance Program, Health Savings and Flexible Spending Accounts, Education Benefits
- Additional Perks: Worldwide Scholarship Program, Volunteer Opportunities, and opportunities for professional growth in the healthcare technology industry
A Day in the Life of the Team Lead Staff Software Engineer
In this role, you’ll help shape the future of our client’s cloud-based dental platform, including their flagship product. You’ll work closely with engineering leadership, product managers, and cross-functional teams to design and build secure, scalable features while mentoring other developers. This position blends deep technical contribution with early leadership responsibilities, offering a clear path toward technical or people management roles.
Responsibilities include:
- Lead the technical design and development of new and existing finance-related features within the Dentrix Ascend platform
- Develop clean, efficient, and maintainable Java code using Spring Boot while following Test-Driven Development (TDD) and clean architecture principles
- Apply advanced object-oriented design, SOLID principles, design patterns, and refactoring techniques to maintain high-quality codebases
- Contribute to overall system architecture with a focus on scalability, reliability, and performance under heavy usage
- Collaborate with product managers, designers, and engineering teams to translate business requirements into robust technical solutions
- Troubleshoot and resolve complex technical issues to ensure platform stability and reliability
- Mentor junior engineers and promote engineering best practices and continuous learning
- Partner with DevOps teams to support CI/CD pipelines and deployment automation
- Participate in Agile/Scrum ceremonies such as sprint planning, stand-ups, retrospectives, and code reviews
- Stay current with Java and related technologies, recommending modern tools and practices that improve product quality and team productivity
Requirements and Qualifications:
- 8+ years of experience building backend software with Java and Spring Boot, including enterprise-level application development
- Prior experience designing or working with microservices and modern software architecture patterns
- Previous experience supporting the team and guiding technical decisions as a team lead or technical lead
- Experience working with large language models (LLMs) or AI tools for generating, interpreting, or improving codebases
- Prior experience mentoring engineers or provided technical leadership while maintaining strong communication across the team
- Excellent communication and collaboration skills
- Passion for building high-quality software and enabling team success
- Bachelor’s degree in a related field
About the Hiring Company:
Our client develops cloud-based software designed to help dental professionals manage and grow their practices. Their flagship platform delivers modern practice management tools that improve efficiency, patient experience, and operational insight. The company focuses on innovation, scalability, and empowering healthcare professionals through technology.
Come Join Our Engineering Team!
Start by filling out this 3-minute, mobile-friendly application here. We look forward to hearing from you!
At MityLite, we design and manufacture high-quality, durable furniture solutions for hospitality, event, and commercial spaces. Our products are trusted worldwide for their strength, style, and versatility—helping customers create exceptional experiences every day.
Due to growth, we’re expanding our team and looking for a Manufacturing Engineer who thrives on solving complex problems and driving efficiency. This role is critical to ensuring our operations scale smoothly while maintaining the exceptional quality our customers expect.
If you’re passionate about optimizing processes, boosting equipment uptime, and leading projects that make a measurable impact, this is your opportunity to join a company where your work truly matters.
Key Responsibilities:
Own the Process: Map, measure, and optimize workflows end-to-end; eliminate bottlenecks, reduce cycle times, and lock in repeatable quality.
Prioritize, Then Make It Better: Rapidly troubleshoot mechanical, pneumatic, and controls systems failures; lead DMAIC activities such as 5-Why / 8D root-cause investigations and implement poke-yoke permanent fixes that stick.
Equipment Uptime Obsession: Perform PM and Capex optimization, spare-parts strategy, and rapid changeover designs; keep OEE and Production capacity trending north.
Project Execution: Scope, budget, and deliver capital projects—such as new fixtures, line optimization layouts, automation cells—on time and under budget.
Data-Driven Decisions: Pull real-time data from Equipment, ERP, and time studies; build Business cases that indicate valuer and priority and trigger action.
Standard Work Creation: Write crystal-clear work instructions, SOP’s, and control plans; train operators and technicians until the process runs itself.
Cross-Functional Muscle: Partner with maintenance techs, operators, quality engineers, and product design to ship perfect product every day.
Plastic Manufacturing Support: Evaluate status of tools in injection molding and plastic extrusion, design and evaluate plastic components using SolidWorks, act as point of technical contact to plastics, mold making and extension suppliers.
Qualifications:
- BS in Mechanical Engineering, Manufacturing Engineering, or equivalent.
- 2+ years supporting production equipment and processes in a manufacturing environment.
- Hands-on wrench-turner: experience rebuilding gearboxes, aligned conveyors, and programmed basic PLC logic. Looking for a mix of hands on and theoretical experience.
- Mastery of structured problem-solving (5 Whys, Fishbone, Pareto, FMEA).
- Fluent in SolidWorks for fixture design and layout; ERP/MES experience (Nav or SAP, Plex, Epicor, etc.).
- Proven ability to lead operators and techs through change via documentation, training, without hand-holding.
Preferred Skills:
- Automation integration (robots, vision systems, collaborative cells).
- Value-stream mapping and simulation (FlexSim, Arena, or even Excel-based).
- Welding, machining, or assembly fixture design from scratch.
- Six Sigma (DMAIC) Green Belt or higher.
If you live for the sound of a line hitting record throughput because *you* made it happen, let’s talk.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required on day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Raytheon is seeking a talented and motivated Senior Systems Integration and Test II Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting various Electronic Warfare (EW) and Radar Warning Receiver (RWR) Systems. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment.
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Integration & Test II Engineer provides comprehensive systems engineering and integration test support by assessing program needs, planning and coordinating test activities, developing schedules, and executing test efforts from project initiation through system transition. The role involves addressing a wide range of technical challenges that require thorough information gathering, detailed analysis, and investigative problem‑solving to identify root causes and determine effective resolutions.
The following responsibilities are expected though not limited to for a Senior Systems Integration & Test II Engineer (EW)
Generate test plans/procedures for assessing Electronic Warfare (EW) system performance
Execute in-house and off-site test activities for system demonstrations and/or system sell-off.
Brief senior program management and engineering leadership.
Test EW hardware and software builds.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Systems Engineering, Electrical Engineering, Software Engineering or Physics) and a minimum of 2 years of prior relevant experience
S. government issued Secret security clearance is required prior to start date. S. citizens are eligible for a security clearance
Experience writing requirements for EW/Radar system test events
Experience leading system test equipment and special test equipment development activities
Experience troubleshooting, testing, and integrating EW/Radar system test equipment
Experience modeling the performance of EW/Radar systems
Experience with integration of mixed signal modules into the next higher assembly
Experience with security requirements related to government testing
Familiarity with Model-Based Systems Engineering (Cameo Enterprise Architecture), specifically using SysML. Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – relocation assistance available for this position
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.
In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.
This position is in McKinney Texas
What You Will Do
- Reading contracts for understanding of the deliverables
- Working in a PDM system to capture, manage, and track data deliverables and/or receivables
- Coordinating with cross-functional teams to obtain requested data
- Proofreading data for compliance to the requirement(s)
- Managing the data deliverable schedule and providing the data to the customer on-time
- Learning and understanding contractually required markings applied to data
- Running forecast reports and providing them to the appropriate stakeholders
- Providing metrics related to on-time deliveries and outstanding dispositions upon request
- Reviewing and approving sub-tier supplier statements of work for data requirements
- Supporting program meetings and providing training to program personnel and customers and/or suppliers
- Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information
Qualifications you must have
- Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
- Minimum of 2 years’ experience related to data management and/or equivalent professional experience
- Minimum of 2 years’ experience in a customer support/service role
Qualifications We Value
- Knowledge of U.S. government defense contracts
- Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
- Collaborate in a team environment
- Self-motivated and detail oriented
- Proven excellent oral and written communication and presentation skills
- Excellent proofreading skills
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDGPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.
In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.
This position is in McKinney Texas
What You Will Do
- Reading contracts for understanding of the deliverables
- Working in a PDM system to capture, manage, and track data deliverables and/or receivables
- Coordinating with cross-functional teams to obtain requested data
- Proofreading data for compliance to the requirement(s)
- Managing the data deliverable schedule and providing the data to the customer on-time
- Learning and understanding contractually required markings applied to data
- Running forecast reports and providing them to the appropriate stakeholders
- Providing metrics related to on-time deliveries and outstanding dispositions upon request
- Reviewing and approving sub-tier supplier statements of work for data requirements
- Supporting program meetings and providing training to program personnel and customers and/or suppliers
- Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information
Qualifications you must have
- Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
- Minimum of 2 years’ experience related to data management and/or equivalent professional experience
- Minimum of 2 years’ experience in a customer support/service role
Qualifications We Value
- Knowledge of U.S. government defense contracts
- Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
- Collaborate in a team environment
- Self-motivated and detail oriented
- Proven excellent oral and written communication and presentation skills
- Excellent proofreading skills
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite : Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
Citizen, U.Person, or Immigration Status Requirements:
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. Raytheon Engineering designs, produces, and builds new technologies and enhances existing capabilities to solve our customers’ most complex challenges. The Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.
We are looking to add to our team and desire a Senior Technical Support Engineer to be part of a team that provides the most advanced end-to-end solutions that detect, track, engage and neutralize a broad range of threats. The role includes knowledge of RF product testing and associated RF test equipment, typically obtained through a University Degree program, or through work experience. May have practical knowledge of projects, programs and systems with the ability to make enhancements in daily work.
Perform electrical engineering functions involving the layout, building, testing, troubleshooting, repairing and modification of electronic or electro-mechanical devices, assemblies, subsystems, and systems.
Perform analysis on production data, to determine root cause analysis of failures.
Be involved in planning and executing rework of production assemblies.
This 1st shift role will be 100% on-site and based in McKinney, TX.
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior work experience to include any combination of the following:
S. government issued security clearance is required. S. citizens are eligible for a security clearance.
Active DoD Secret clearance with investigation within last five years.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position offers relocation based on candidate eligibility.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Were expanding our engineering organization dramatically to meet exciting customer demand, and were actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Apply today and take the next step in your engineering career.
Raytheon is seeking a talented and motivated Systems Engineer to join our team within the Systems Engineering and Test Capabilities (SETC) Discipline, supporting a range of programs. This role offers a unique opportunity to work across the full lifecycle of the product, from concept to deployment
Every day will bring new challenges, requiring you to collaborate across disciplines to troubleshoot issues, perform data analysis, and implement solutions. The Systems Engineering and Test Center (SETC) organization is currently hiring a Systems Engineer II to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and test to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, test and strengthen our systems to work the first time and every time for our warfighters!
In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle. This role is 100% on-site at our Tucson, AZ campus.
In this Systems Engineer role, you may support some of the following types of activities:
Core Systems Engineering: Develop system architecture and model using Model Based Systems Engineering. Conduct trade studies based on Concept of Operations. Perform Test Planning: Develop and implement test plans, procedures, integration, and verification documentation in both simulated and real-world environments and perform/execute the testing
Integrate Systems: Collaborate with multi-disciplinary team to integrate hardware and software into tactical systems, evaluating their functionality and impact. Perform Platform Integration, Flight Test, Qualification, Design Verification Execution
Identify and resolve hardware, software, and system issues through detailed data analysis and debugging.
Perform Data Analysis: Conduct statistical and numerical analysis test data to ensure optimal system performance and verify requirements.
Support Missions: Travel as needed to support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations.
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 2 years of prior engineering experience.
Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.
tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.
Understanding of the Systems Engineering product lifecycle
Experience with performing performance analysis and presenting analytical and technical material
Experience with DOORS, Cameo, or other digital engineering tools.
Experience with model-based engineering and associated tools
Experience working in an integration lab, test facility, or in the field, supporting integration and/or verification.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Eligible – Relocation assistance is available
This includes all production and maintenance employees, as they are essential to the development of our products.
~ This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
