Engineering Journal Jobs in Wisconsin

**MUST BE A US CITIZEN**

The Associate Manufacturing Engineer will design new, modified, or improved components/process tooling in accordance with engineering standards and project scope of work. This role will be an entry level role within the operations engineering organization to gain knowledge and skills in providing engineering support to various manufacturing processes.

YOUR IMPACT:

These duties are not meant to be all-inclusive, and other duties may be assigned.

• Under close supervision, perform basic engineering calculations, investigations, and tasks as assigned according to engineering standards and processes.
• Support more senior engineers in the preparation of plants, designs, computation methods, and reporting.
• Work on projects with limited complexity in a support role.
• Prepare vehicle layouts and component part drawings with supporting calculations (i.e. weight distribution etc.).
• Select parts and/or design components for cost and quality-consciousness.
• Follow project on the assembly floor or through prototype build when instructed by supervisor and render assistance as necessary.
• Generate bills of material and assembly drawings as required by the project.
• Adhere to time schedules.
• Utilize engineering tools (CAD) equipment in assigned projects.

MINIMUM QUALIFICATIONS:

• Bachelor’s degree in engineering (mechanical preferred) or related field or an equivalent combination of education and experience.

STANDOUT QUALIFICATIONS:

• Internship in a relevant engineering space.
• Knowledge of equipment manufacturing industry or automobile industry.
• Experience with Lean and/or Six Sigma tools.
• Experience in Microsoft Office Suite; including a strong emphasis on Excel.
• Analytical and problem-solving skills.

Top Qualifications the manager is looking for:

• Experience with CAD modeling software, 3D
• Familiarity with mechanical designing
• Familiarity with applying material science within a design
• Strong mechanical background.
• Manufacturing facility exposure.

Intake notes:

• The hiring manager leads a team who introduces new products into facilities.
• His team determines what the manufacturing and assembly process will look like and work closely with the plant engineering team.
• In this entry level Manufacturing Engineer role, the selected candidate will work with the plant engineering team to identify tooling requirements, then designing new tools needed for assembly.
• Designs vary from basic to complex.
• Helpful industry experience: agriculture, automotive, or commercial trucks.
• HM will consider strong candidates with an associate's degree.
• HM will consider candidates who are completing their bachelor's degree and can start after graduation, or who can start on a part-time basis until graduation.
• Will focus on candidates with a strong mechanical background and manufacturing facility exposure, who are committed to staying in the Oshkosh area long-term.
• 3D modeling experience
• Tooling design

Job Title: Mechanical Engineer – Auxiliary Systems

Location: Janesville, WI (On-Site)

Schedule: Monday–Friday, 8:00 AM – 5:00 PM

Overview

We are seeking a Mechanical Engineer to support the design, development, and construction of auxiliary mechanical systems within a highly regulated engineering environment. This role will act as a key liaison between the design and construction teams, ensuring system designs are properly executed during procurement, fabrication, installation, and commissioning phases. The engineer will collaborate with internal stakeholders, vendors, and construction teams to ensure systems are delivered on time, on budget, and in compliance with project requirements.

Key Responsibilities

• Review and coordinate stakeholder feedback on system design packages.
• Interface with the Procurement team to support vendor selection, design reviews, and fabrication contracts.
• Collaborate with equipment vendors on Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs).
• Ensure on-time and on-budget delivery of auxiliary mechanical equipment.
• Perform owner's acceptance reviews of vendor-supplied design documentation.
• Prepare and review test plans for factory and site acceptance testing of equipment.
• Act as a technical liaison between engineering design and construction teams during installation and commissioning.
• Address field inquiries and technical issues during construction.
• Conduct site walkdowns and inspections of installed equipment to verify proper installation and compliance with design specifications.
• Support system design documentation including drawings, specifications, calculations, reports, and quality documentation.
• Provide schedule updates and coordinate with project controls on task progress.
• Manage multiple engineering tasks and small-scope project management responsibilities, including scheduling, planning, and resource coordination.

Required Qualifications

• Bachelor's degree in Mechanical Engineering or a related discipline.
• 6+ years of relevant engineering experience in a professional setting (10+ years preferred).
• Experience working in highly regulated environments or complex engineering projects.
• Ability to manage multiple projects simultaneously at different stages of completion.
• Strong problem-solving abilities and a hands-on engineering mindset.
• Excellent communication and collaboration skills.
• Willingness to learn and develop new technologies.

Preferred Qualifications

• 10+ years of relevant project experience.
• Knowledge of ASME B31.3 Process Piping Code.
• Experience supporting engineering activities on active construction sites.
• Experience with structural design considerations for seismic loading.
• Familiarity with quality systems and engineering support for incoming inspection of custom equipment.
• Experience working within nuclear or similarly regulated quality systems.
• Proficiency with engineering software such as AutoCAD Plant 3D, SolidWorks, or AutoPipe.

3rd Shift Production Supervisor - Menomonee Falls, WI | Full-Time | Direct Hire $65,000 – $80,000

About the Role

We are partnering with a well-established machining and assembly facility in the Menomonee Falls area to find their next 3rd Shift Production Supervisor. This is a confidential search for a stable, growing manufacturer serving the automotive and industrial markets.

If you're a hands-on leader who thrives in a fast-paced production environment and takes pride in running a tight, safe, and efficient shift — this one's worth a conversation.

What You'll Be Doing

• Leading and developing a team of ~20 machine operators on 3rd shift (9:30 PM – 6:30 AM)
• Driving production efficiency, safety compliance, and quality performance across your shift
• Tracking key metrics including scrap, efficiency, and safety KPIs
• Coordinating production scheduling and managing manufacturing cell performance
• Partnering with engineering, quality, and maintenance to resolve issues fast
• Coaching employees, conducting performance reviews, and building a strong team culture

What We're Looking For

2–4 years of supervisory experience in a manufacturing environment Track record of managing production teams and hitting performance targets Comfortable with off-shift leadership — able to make decisions independently Strong communicator with both operators and plant leadership Willingness to train on 1st shift for approximately one month before transitioning to 3rd

Bonus Points For:

• Background in machining or metal manufacturing
• Lean manufacturing experience
• Prior experience as a machine operator

Compensation & Benefits

• $65,000–$80,000 base (up to $85,000 for the right candidate)
• 401(k) with company match
• Health, dental & vision insurance
• Paid holidays & vacation
• Company-paid life insurance & disability coverage

Job Summary

Under the direction of the Lead Automotive Account Manager - West Coast, the SOCAL Automotive Sales Engineer is responsible for maintaining current customer relationships and identifying areas for potential growth with established and new customers in the electric vehicle market. The primary role will be serving as the key account manager for a major electric vehicle company with responsibility for several smaller accounts. The role is responsible for being the main point of contact for communication regarding product selections and opportunity generation. This position is based primarily in the SOCAL area, with travel to the West Coast region as required. This individual will work with a cross-functional team, including sales, project management, product management, and engineering, to achieve success. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Serve as the key account manager for SOCAL automotive vehicle customers.
  
  
• Coordinate and align domestically and globally for relevant opportunities as required.
  
  
• Expand HellermannTyton's position in low-voltage, high-voltage vehicle electrification systems as well as fluid routing opportunities.
  
  
• Uncover opportunities in standard, platform-based, and custom products
  
  
• Attend and lead selected customer-facing meetings to drive opportunities to specify HellermannTyton's products.
  
  
• Support overall business direction as set by automotive sales and marketing leadership with vetted information and strategic clarity to ensure key activities are moving forward.
  
  
• Work with customer engineering teams to assess standard plastic fasteners/clips for wiring harnesses and fluid routings, offer substitutions, and deliver new, improved offerings.
  
  
• Use understanding of technical drawings, documents, and automotive testing requirements to convert information into recommendations and next steps to achieve the specification.
  
  
• Understand and have full knowledge of OEM specifications for standard parts and leverage that to gain market share.
  
  
• Follow and improve process flows to enable efficient multi-stakeholder direction and understanding of key actions and commitments.
  
  
• Manage customers current and upcoming platforms and develop sales plans in line with customers goals
  
  
• Maintain familiarity with competitors' products and identify opportunities
  
  
• Effectively communicate status, actions, milestones, and activities to key stakeholders.
  
  

Other Functions:

• 
  
  
• Ability to discern opportunities and roadblocks to the goals of a project and drive results for increased sales.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• BS from an accredited four-year college or university, engineering discipline preferred, or equivalent experience in lieu of degree
  
  
• Excellent knowledge of the Microsoft Office Suite.
  
  
• 5+ years of professional experience demonstrating mechanical and engineering aptitude, along with successful key customer responsibility
  
  
• Automotive Industry Experience required
  
  
• Knowledge of plastic fasteners is preferred
  
  
• Must have a valid driver's license, acceptable driving record, and adequate insurance
  
  
• Minimal travel involved
  
  

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Manufacturing Engineer – Hands-On Operations Focus

Position Overview

We are looking for a mechanically inclined Manufacturing Engineer who thrives on the production floor and isn’t afraid to roll up their sleeves. This is not a desk-only engineering role. The right person will be equally comfortable analyzing data and physically working alongside maintenance and production teams to solve equipment, tooling, and process challenges in real time.

This role plays a key part in driving capital projects, strengthening plastics processing performance, improving automation reliability, and enhancing overall plant efficiency. Success in this position requires practical mechanical ability, strong troubleshooting skills, and a proactive, get-it-done mindset.

What You’ll Be Responsible For

• Lead capital equipment and infrastructure projects from concept through implementation.
• Spend significant time on the production floor supporting molding and automation systems.
• Diagnose and resolve mechanical, tooling, and automation issues hands-on.
• Work directly with maintenance and operations teams to improve equipment uptime and reliability.
• Identify root causes of process failures and implement permanent corrective actions.
• Drive safety, productivity, and cost-improvement initiatives.
• Coordinate timelines, milestones, and cross-functional communication for engineering projects.
• Support tooling improvements, machine modifications, and equipment upgrades as needed.

What We’re Looking For

• Bachelor’s degree in Engineering, Manufacturing Technology, Packaging, or a related technical field.
• Minimum 4 years of engineering experience within a manufacturing environment, preferably plastics processing.
• Demonstrated experience managing capital or process improvement projects.
• Strong mechanical background — capable of physically troubleshooting equipment and working directly on machinery when needed.
• Ability to read prints, understand mechanical systems, and collaborate closely with maintenance.
• Comfortable working in a fast-paced production setting rather than a purely office-based environment.

Additional Experience That’s a Plus

• Experience in injection molding operations.
• Lean Manufacturing, Six Sigma (Green/Black Belt), or PMP certification.
• Familiarity with CAD tools such as SolidWorks or AutoCAD.
• Background in automation systems troubleshooting.

Why Join Us

We are a stable, growth-oriented manufacturer with decades of industry experience and a strong commitment to operational excellence. Our culture values collaboration, accountability, and continuous improvement — and we support the people who drive our success.

We offer a competitive benefits package including:

• Medical, dental, and vision coverage
• 401(k) with company match
• Paid time off and holidays
• Employee wellness programs

Position Summary

The Tractor Test Driver & Quality Inspector is responsible for conducting structured test drives of new or serviced tractors to evaluate operational performance, safety, and overall product quality. This role identifies, documents, and communicates mechanical, functional, and quality-related issues observed during dynamic testing. The position collaborates closely with Engineering, Quality Assurance, and Service teams to support root cause analysis and continuous product improvement.

Key Responsibilities

• Perform standardized and ad-hoc test drives of tractors on various terrains including paved surfaces, gravel tracks, fields, and slopes under varying load conditions and speeds.
• Evaluate and validate performance of critical systems including engine, transmission, PTO, hydraulics, steering, braking systems, 3-point hitch, auxiliary circuits, and implements.
• Identify and document issues related to NVH (Noise, Vibration, and Harshness), drivetrain irregularities, hydraulic lag or oscillation, steering drift, brake fade, electrical faults, sensor anomalies, and operator interface (HMI) defects.
• Conduct visual and functional inspections for leaks, loose components, misalignment, abnormal wear, sharp edges, fit and finish defects, and paint or coating issues.
• Use OEM diagnostic tools or data acquisition systems to verify CAN bus communication, read diagnostic trouble codes (DTCs), and capture operational data logs.
• Communicate findings and provide detailed reports to cross-functional teams including Engineering, Manufacturing, and Quality departments.
• Support root cause investigations and recommend corrective actions based on test results.
• Perform pre-operation safety inspections including checks of tires, fluid levels, lights, horn, ROPS, and seat belts.
• Recommend improvements to product design, assembly processes, and testing procedures based on operational observations.
• Follow all safety protocols and testing procedures during equipment operation and evaluation.

Minimum Qualifications

• High school diploma or GED required; Associate degree or technical certification in Automotive Technology, Diesel Technology, Agricultural Equipment Technology, or a related field preferred.
• Minimum of 2 years of experience operating tractors or heavy/mobile equipment in agricultural, construction, industrial, testing, or service environments.
• Valid driver’s license with a clean driving record.
• Ability to operate tractors with manual and hydrostatic transmissions.
• Basic understanding of hydraulics, powertrain systems, and electrical systems.
• Experience with CAN diagnostics and reading diagnostic trouble codes (DTCs) preferred.
• Ability to read and interpret basic technical drawings, service manuals, and testing procedures.

Physical Requirements

• Ability to frequently climb on and off heavy equipment.
• Capability to lift up to 50 lbs when required.
• Ability to sit for extended periods while operating equipment during testing.

Work Environment

• Work will be performed both outdoors and in designated testing areas.
• Exposure to noise, vibration, dust, and varying weather conditions.
• Use of personal protective equipment (PPE) such as hearing protection, safety glasses, gloves, steel-toe boots, and high-visibility clothing is required.

Preferred Certifications

• OSHA 10 or OSHA 30 Safety Certification.
• Forklift or mobile equipment operation certification (site-specific).
• First Aid and CPR certification.
• CDL not required; however, agricultural or heavy equipment operation training is considered a plus.

This role owns the financial operations of the business and supports sales execution so momentum, cash flow, and client confidence are never constrained by the founder.

You operate as a trusted proxy for the founder, with real authority over financial execution, revenue operations, and client follow-through. If it touches money, forecasting, invoicing, payroll, or sales follow-up, you own it.

This is a role for someone who brings judgment, professionalism, and calm authority, not someone waiting for direction.

Primary Responsibilities:

1. Financial Ownership & P&L Visibility (Primary)

You fully own day-to-day financial operations and clarity, including:

• End-to-end ownership of P&L accuracy and visibility
• Payroll execution and review
• Accounts payable and vendor payments
• Invoicing, accounts receivable, and payment follow-up
• Credit card and expense reconciliation
• Management of the accounting inbox and all financial communications
• Reducing outsourced accounting work by 80%+ through internal ownership
• Designing and enforcing clean, repeatable client onboarding and invoicing processes
• PO creation and follow-up to ensure engineering work starts without delay

The founder does not monitor QuickBooks, AR/AP, payroll, or invoice status.

2. Project Accounting, Forecasting & Cash Control

You ensure financial reality is always visible, current, and actionable.

This includes:

• Project-level financial tracking
• Revenue and cash flow forecasting
• Clear visibility into:
• When revenue is expected
• When cash is received
• Where timing, scope, or margin is drifting
• Surfacing risk early—before it becomes disruptive
• Providing clean inputs to support hiring, spending, and delivery decisions

This role exists to keep the business on offense, not reacting late.

3. Sales Execution Support & Revenue Operations

You support sales by ensuring nothing stalls due to lack of follow-up, organization, or discipline.

This includes:

• Owning inbound lead follow-up from website and HubSpot
• Prompt, professional calling and emailing of warm leads
• Ensuring every lead and deal has a clear next action
• Booking meetings without founder coordination
• Maintaining CRM discipline with zero stale deals
• Supporting phone and inbox management related to sales follow-up
• Coordinating with marketing, HubSpot workflows, and WordPress as needed

You are not the closer.

You ensure closers stay focused, prepared, and unblocked.

4. Client Experience & Professional Representation (Non-Negotiable)

You own the client journey from first contact through billing and project kickoff.

This includes:

• Managing onboarding from PO through project start
• Sending and tracking W-9s, ACH/wire details, intake forms, and onboarding materials
• Setting clear expectations around billing, milestones, and payment timing
• Acting as the primary point of contact for billing clarity and follow-through
• Ensuring a clean handoff from Sales to Engineering and Operations

This is a client-facing role.

Professionalism, clarity, confidence, and consistency are required.

Clients should consistently feel:

• Trust
• Control
• Competence

Every interaction matters.

Tools & Systems

• QuickBooks (P&L, invoicing, AP/AR, project accounting)
• HubSpot (CRM, pipelines, dashboards, follow-ups)
• Microsoft 365 (Outlook, Teams, OneDrive)
• ADP (Payroll – training provided)
• Calendly
• AI tools including ChatGPT, , Fireflies, and Zapier

Required Experience & Profile

This role is for someone with ownership-level experience, not support-only exposure.

Required:

• 2–10 years of experience in one or more of:
• Finance Operations
• Revenue Operations
• Accounting or Controller support
• Client Operations
• Sales Operations
• Experience working closely with a founder or senior executive
• Proven comfort owning money, follow-up, and decisions
• Hands-on experience with:
• Invoicing, AR, and AP
• Financial operations and reporting
• CRM systems (HubSpot preferred)
• Strong written and verbal communication
• Calm, professional presence in client and vendor conversations
• Ability to exercise judgment without constant escalation

Preferred:

• Degree in Business, Finance, Accounting, Operations, or related field
• Experience in manufacturing, engineering, or project-based businesses
• Experience representing a company in financial or client-facing discussions

What This Role Is Not

• Not an administrative-only role
• Not calendar management as a primary function
• Not a “wait for instructions” position

This role requires ownership, discretion, and polish.

Success Looks Like

• The founder trusts the numbers without hesitation
• Financial risk is visible early
• Clients experience clean, professional follow-through
• Sales momentum is supported without founder involvement
• The business runs cleaner, calmer, and faster

Job Summary
Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. "

Essential Functions:

• 
  
  
• Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies.
  
  
• Collaborate and review suggested design improvements with Automation Engineer Design Team
  
  
• Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality
  
  
• Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault
  
  
• Use AB software to create/modify and update machine Programmable Logic Control programs as required.
  
  
• Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department.
  
  
• Possess advanced skills with vision systems and integration for quality inspections.
  
  
• Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team.
  
  
• Participate in project hand off processes that require process optimization, process flow, and assisting with training as required.
  
  
• Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings.
  
  
• Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team.
  
  
• Recommend and implement measures to improve equipment performance, quality and production methods.
  
  
• Stay current with technology and industry standards
  
  
• Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy
  
  

Other Functions

• 
  
  
• Travel could be required on a "as needed" basis
  
  
• Attend all meeting with cross-functional teams to review project work and direction
  
  
• Lend support through training and technical advice to help other technicians become more efficient.
  
  
• All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment.
  
  

Success in this role will require

• 
  
  
• Use of SolidWorks/Cad System
  
  
• Use of AB Programmable Logic Control software as required
  
  
• Six Sigma methodologies and practices
  
  
• Project management skills and creating documentation
  
  
• Ensure conformance to ASME codes as required
  
  
• Follow all IATF16949 and company standards for quality and manufacturability
  
  
• Manage and leverage resources to complete projects on time and within budget
  
  
• Vision System Integration and control
  
  
• Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements.
  
  
• Ability to effectively present information and respond to questions from groups, managers and fellow team members.
  
  
• Experience in communicating with suppliers and vendors
  
  
• Basic to advanced skills in pneumatic systems
  
  
• Advanced Programmable Logic Control knowledge
  
  

What You'll Bring

• 
  
  
• Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation.
  
  
• Ability to read and interpret documents such as technical specifications, schematics, and ladder logic
  
  
• Certified Six Sigma Green Belt is preferred
  
  
• Ability for overnight travel by air or land as needed.
  
  
• Must have a valid drivers license, with an acceptable driving record, along with adequate insurance
  
  

Rev. 9.21.2021

Title: Tooling Engineer

Reports to: Tooling Manager

Department: Tooling Engineering

Job Summary:

Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Writing purchase orders stating mold building specifications.
  
  
• Writing requests for quotations for vendors.
  
  
• Assure that vendors keep within budget and timing constraints on projects.
  
  
• Evaluate and Approve injection molding tool design.
  
  
• Assure that vendors incorporate the approved design in injection molding tool construction.
  
  
• Keep a library of tool drawings.
  
  
• Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
  
  
• Evaluate product design as to moldability and simplification for moldability.
  
  
• Assist in troubleshooting injection molding problems.
  
  
• Work with injection molding tool designs to assure the highest quality molding tools possible.
  
  
• Work with toolmakers to assure the highest quality injection molding tools possible.
  
  

Other duties assigned:

• 
  
  
• Other duties as assigned.
  
  

Qualifications:

• 
  
  
• High school diploma or equivalent.
  
  
• Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
  
  
• Prior experience with plastic injection molding process.
  
  
• Knowledge of injection molding tools and injection molding tool construction.
  
  
• Knowledge of machine tools and how machine tools relate to injection mold tool construction.
  
  
• Knowledge of manufacturing best practices.
  
  
• Excellent computer skills, including Microsoft software and CAD software.
  
  
• Organized; can meet deadlines.
  
  
• Ability to work non-standard hours to meet the needs of the customers.
  
  
• Ability to travel internationally.
  
  
• Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
  
  

#LI-KN1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

The ideal candidate possesses both a high level of technical expertise and an innate passion to build. You will play a critical role in creating and refining processes in order to improve manufacturing safety, quality, and productivity.

Responsibilities

• Create and maintain work instructions and manufacturing specifications
• Identify and recommend methods for improving worker efficiency and reducing waste of materials and utilities
• Collaborate cross-functionally to facilitate production process and evaluate potential changes

Qualifications

• Bachelor's degree in either Industrial or Mechanical Engineering
• At least 1 - 2 years' of engineering experience
• Experience with Lean, Six Sigma, Kaizen, Kanban and 5S