Engineering Journal Jobs in Windsor Connecticut

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Head of GIA Investment Performance Measurement and Analytics

Investment Management

Full-Time

New York, NY, Boston, MA or Springfield, MA

The Opportunity

MassMutual Investment Management (IM) seeks a seasoned investment management and operations professional to lead the investment performance function for MassMutual’s General Investment Account (GIA). This role reports to the Head of Manager Oversight and will:

• Design, and oversee implementation of models, policies, and procedures for a best-in-class performance and attribution reporting function.
• Help drive strategy and execution of investment performance measurement, attribution, and reporting programs supporting MassMutual’s Board, CIO, and other key stakeholders.
• Help shape market commentary and attribution narratives for internal and external stakeholders, including affiliate managers and GPs.
• Complete the feedback loop for MassMutual Investment Management in the performance space by collaborating with teams supporting product profitability analysis and PMs managing ALM and capital allocation decisions.

The Team

The Manager Oversight team is part of IM’s Strategy and Governance organization, reporting to MassMutual’s CIO. The team oversees IM’s asset manager relationships and functions, including manager operational due diligence, investment mandate onboarding & lifecycle management, and investment performance. Adjacent teams handle business strategy and planning, vendor oversight, investment compliance, and investment reporting for MassMutual’s Board & Investment Committee.

The Impact and Key Responsibilities:

Lead MassMutual’s investment performance measurement, attribution, and reporting function for a $250B+ General Investment Account (GIA). In this role you will be on the starting line to help influence, design and implement a state-of-the-art performance measurement and attribution capability. This senior leadership role requires strategic planning, influence, executive visibility, and the opportunity to transform performance analytics and attribution capabilities for a prestigious insurance company.

• Evolve existing practices and refresh methodologies, assumptions, and models to introduce new and industry best practice approaches for presenting performance across products, asset classes, and instruments.
• Lead strategic platform rationalization and evaluate performance engines to enhance analytics.
• Provide technical expertise in portfolio management, finance, capital markets, and investment performance reporting, guiding decisions to align with market standards.
• Contribute to portfolio reporting and attribution by applying experience across asset classes and investment strategies, ensuring liability-driven investment strategies and ALM models are accurately derived and validated.
• Collaborate directly with portfolio managers and lead teams to achieve strategic alignment across functions, simplifying complex income and return objectives under liability constraints while maintaining precision and accuracy in reporting.
• Manage the evolution of the program to maximize total-portfolio view and coverage for GIA reporting, expanding capabilities important to investment team members.
• Help develop a long-term roadmap to unlock value and greater ROI for the Performance program, including performance monitoring as a compensating control for financial reporting.
• Help drive the development of reporting standards for leadership and Board materials, framing investment successes, market impacts, and risk-adjusted performance drivers.
• Help with the design of data integration between IBOR/ABOR systems and performance engines to optimize data validation, reporting efficiency, and portfolio transparency.
• Lead strategic initiatives to align performance reporting with insurance industry practices, NAIC classifications, and risk-based capital requirements, ensuring compliance and strategic flexibility.
• Serve as a trusted advisor to the CIO and Senior Leadership Team, influencing investment strategy communication and Board-level reporting.

The Minimum Qualifications

• Bachelor’s degree in STEM, Finance-Accounting, Actuarial Science, or related field.
• 10+ years in investment management with progressive experience focusing on performance measurement, attribution, and reporting.
• 5+ years in leading teams and/or investment strategy and decision-making for an asset owner, allocator or investment advisor, in a role focused on: investment performance, attribution and analysis; portfolio management; product management or research; portfolio strategy or securities research [investment selection].
• Experience with liability-driven investment strategies, including ALM frameworks, duration matching, and immunization techniques.
• Experience designing, building, and calibrating investment return, valuation, or risk models for capital allocation in multi-asset portfolios.
• Advanced Excel and quantitative modeling; familiarity with GIPS® standards and compliance; strong understanding of risk-adjusted return metrics (TWR, IRR, Brinson attribution, factor attribution).
• Ability to integrate cash flow projections and liability schedules into performance analytics; can source index and reported market yields or returns as benchmarks, model, select “best-fit,” and defend rationale in Q&A with investment professionals.
• Deep knowledge of fixed income, structured credit, private credit, and alternative investments; understanding of insurance asset management and regulatory frameworks; working knowledge of NAIC and statutory accounting preferred.
• Expertise in designing attribution models that incorporate liability benchmarks; ability to optimize portfolios for duration and convexity matching; strong leadership and stakeholder engagement across investment, actuarial, and risk teams.
• Proven ability to establish and maintain strong relationships with peers and key partners throughout the organization and in their external, professional networks.

Familiar with full spectrum of geographic and credit risk demographics: IG, HY, and Distressed; NA, EMEA, APAC; Developed or Emerging Markets.

Technical Skills Covering:

• Multi-Asset (total portfolio) Total-Return Presentation and Public Market Benchmark Selection
• Relative-Spread, Relative-Yield, and Relative-Market/Index Return Comps (Alts-Benchmarks)
• Bond-Factor Analytics (and to a lesser extent, Equity-Factors)
• Duration-Adjusted Return Modeling
• Portfolio Hedge Attribution: Global Asset-Country and FX Risk; Key-Rate Risk: Default Risk

The Ideal Qualifications

• Master’s degree in STEM, Finance, Quantitative Analytics, or MBA; CPA or actuarial credentials for ALM depth a plus.
• CFA, CIPM or equivalent designation strongly preferred; CAIA or FRM a plus.
• Deep familiarity with Global Investment Performance Standards (GIPS®); experience managing GIPS verification and composite construction for liability-driven portfolios.
• Proven ability to implement automation for performance and ALM reporting; experience with data governance and integration of liability projections into performance dashboards.
• Experience configuring, and testing platforms integrated across the investment ecosystem, such as Performance Engines (SS&C Advent Geneva/APX, Eagle Performance, Clearwater Analytics), Portfolio Management and IBOR Platforms (BlackRock Aladdin, SimCorp Dimension, Charles River IMS), ALM & LDI Tools (Bloomberg PORT, proprietary actuarial systems, Beacon), and Instrument Cashflow and CP-Credit Risk Modeling Services (Intex, Moody’s, S&P).
• Experience implementing BlackRock PBOR

Experience with majority of investments or instruments in: Gov & Corporate Debt, Bank Loans, PE Sponsor and Non-Sponsored Mid-Market Loans and Private Credit, Commercial & Residential Real Estate Debt, Consumer/Retail and Real Estate ABS, Structured ABF, Structured Credit, CLOs/CDOs, Municipal Bonds, Private LP’s, Direct-PE.

Technical Skills Covering:

• Private Equity & Equity-Pacing Models
• Cash-Weighted Returns (IRR and realized-CF holding-period yield)
• Capital-Multipliers (for closed & evergreen portfolios/private-alts strategies)

#LI-LC1

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Aerospace Composite Technician Lead

Join an exciting aerospace startup at a pivotal moment in the future of flight.

Aerospace is at a turning point - costs are rising, supply chains are strained, and traditional ways of building can’t keep up. Our client is changing that.

The company moves fast, thinks big, and combines startup agility with deep aerospace expertise to design, build, and scale aircraft in ways the industry hasn’t seen before. Their team leverages automation, AI-driven tools, and a fully connected digital backbone to accelerate innovation and reduce barriers to production.

As an Aerospace Composite Technician Lead, you’ll be the technical heartbeat of a production cell -owning daily execution while driving safety, quality, repeatability, and continuous improvement for advanced aerospace composite components.

You’ll work closely with technicians, Engineering, and Quality to ensure every part meets the structural integrity and compliance demands of flight-critical hardware.

Why This Role Matters

This is more than a technician role -it’s a hands-on leadership position where your experience directly impacts flight safety, build quality, and production reliability. You’ll help shape how work gets done, elevate your team, and ensure the hardware leaving your cell is built to aerospace standards.

What You’ll Do

• Lead daily composite fabrication with a strong focus on safety, quality, schedule, efficiency, and cost.
• Prep molds, tools, and work surfaces per work instructions and process specs.
• Guide the full composite build process: cutting/kitting, layup, molding, deflash, bonding, and assembly.
• Perform in-process inspections for workmanship, spec adherence, and FOD prevention.
• Maintain material traceability and accurate process documentation.
• Train, mentor, audit, and help certify composite technicians.
• Assign daily work, provide technical direction, and remove roadblocks for the team.
• Act as the main technical liaison between Operations, Engineering, and Quality.
• Improve work instructions and standardize processes for repeatable excellence.
• Support schedule tracking, 5S, and step in as acting Supervisor when needed.

What You’ll Bring

• 4+ years of hands-on aerospace composite manufacturing experience.
• Proven ability to lead, train, and mentor technicians in production.
• Ability to read engineering drawings, ply layup diagrams, work instructions, and process specs.
• Strong knowledge of composite materials, layup, molding, bonding, assembly, and related processes.
• Familiarity with AS9100/ISO9001 standards and strong FOD prevention practices.
• Experience with precision measurement tools such as calipers, scales, and laser projection/alignment systems.
• A process improvement mindset, root cause problem-solving ability, and strong cross-functional communication.
• High attention to detail, accountability, and pride in quality workmanship.
• Strong safety awareness and the ability to thrive in a fast-paced production environment.

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now