Engineering Journal Jobs in Washington Remote
748 positions found — Page 3
Director to VP of Process/Manufacturing & Engineering
Location: Seattle, WA / Reports to: Chief Executive Officer (CEO)
The core of this position is someone who has directly taken a chemical or process manufacturing technology from early stage development through pilot and into commercial production. Specifically someone who has scaled a process based manufacturing system, liquids, heat, pressure, continuous or batch processing, from benchtop or pilot scale to revenue generating commercial scale.
Must have
- Direct experience scaling a process-based manufacturing system from pilot or bench scale to commercial production, ideally with clear quantifiable outcomes.
Strong preference
- Experience doing this scale-up within a startup or resource-constrained environment.
- Background in chemical or process engineering rather than mechanical or discrete manufacturing.
- Experience building operational, quality, and production infrastructure during the early commercialization phase.
- Quantifiable impact metrics around scaling chemical processes. This can take a few different forms, " X size pilot to first $Y M/yr commercial production\" or "Increased production Z%" etc.
Further, someone who has operated across engineering, supply chain, and operations, a true "operations-oriented engineer." High level of independence and drive, ideally someone who proactively flags risks, pushes timelines, and takes ownership of execution.
This is a senior, execution-focused leader, responsible for translating our technology into safe, reliable, on-spec, and cost-disciplined production at scale via our external partner network. You will own the production and engineering strategy, including leading technology transfer, managing contract manufacturer (CM) performance, and driving EPC execution for facility expansion while working with executive leadership to set the strategy for continuous improvement and a large-scale manufacturing network. You will serve as the primary commercial and technical bridge between internal innovation team and the manufacturing environment. This role requires a leader who is equally comfortable turning a wrench, reviewing P& IDs, negotiating multi-million-dollar MSAs, and acting as the owner's representative & quote, on major capital projects.
What You'll Do
1. Strategic Technology Transfer and Scale-up
○ Lead the 'Bench-to-Plant' Interface: Manage the technical hand-off from internal development to external partners, ensuring processes are robust, documented, and ready for commercial-scale production.
○ Scale-Up Oversight: Steward production, quality, and throughput during the critical transition from pilot to commercial runs, troubleshooting as necessary
○ Process Integrity: Ensure high standards for quality and yield is maintained when processes leave our internal control and enter our partner network.
○ Manage all aspects of technology transfer from R&D to contract manufacturing partners, driving tonnage-scale, on-spec production.
○ Planning for Velocity: properly scope and strategically plan timelines to maintain a venture backed pace for scale-up
2. Contract Manufacturing Ownership and Commercial Strategy
○ Commercial Negotiation: Lead the negotiation of Master Service Agreements (MSAs), tolling fees, and other manufacturing contracts. You are responsible for structuring deals that align incentives and protect our interests.
○ Partner Management: Serve as the single point of accountability for CM relationships. Set, track, and enforce KPIs for quality, OTIF delivery, and yield.
○ COGs Ownership: Own the external production cost model and rigorously define cost drivers and partner with the finance team to forecast scenarios and define and refine unit economics.
3. EPC Leadership and Scale Up
○ Project Delivery Strategy: Select and manage the appropriate project delivery model (e.g. Design-Bid-Build vs EPCM) and lead the selection of EPC vendors
○ Front-End Definition: Provide rigorous oversight of FEL/FEED stages to lock in scope before capital commitment.
○ Owner's Representative: Act as primary "Owner's Rep" for all capital projects, holding external firms accountable for schedule, cost, quality, and safety performance, serving as decision maker of change orders.
○ Own the Build: Oversee the physical execution of facility upgrades or new builds, ensuring a seamless handover to operations.
○ Provide technical input into the strategy of where and how to manufacture product to support business growth
4. Quality, Safety, and Risk Management
○ EHS Compliance: Audit and enforce safety standards at CM and any external sites where we are operating.
○ Supply Chain Risk: Identify point of failure in our external network and develop contingency plans for capacity and logistics
○ Quality: Own and maintain Ravel's quality management framework, including oversight of SOPs, documentation, and continuous improvement across internal operations and external partner.
What You'll Bring
● B.S. or M.S. in Chemical Engineering, Process Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, Chemistry or a closely related discipline, or equivalent experience gained through progressive responsibility in manufacturing operations. A PhD or MBA is a strong plus.
● 10+ years' experience in chemical/process manufacturing, technology transfer, and/or contract manufacturing at pilot or commercial scale.
● Capital Projects Fluency: Demonstrated experience acting as the "Owner" on a capital project ($20M+). You understand the difference between FEL 1/2/3 and know how to control TIC.
● Commercial Acumen: Strong experience negotiating tolling agreements, joint development agreements, and construction contracts. You know how to structure a deal to protect IP and cash risk.
● Technical Authority: Ability to read PFDs/P&IDs and challenge engineering partners on design.
● Willingness to Travel: This role requires being present where the work is, at CMs and construction sites (approx 30-50% travel)
This is an opportunity to own manufacturing strategy and execution at a company scaling breakthrough technology into the real world. You will shape how we manufacture globally, with executive-level accountability for cost, quality, delivery, and facilities, and play a central role in the company's next phase of growth.
Join a passionate, visionary team as we build a future where textile production and consumption are part of a sustainable, closed-loop system.
Traits and Characteristics:
● Hustle
● Team player (our team)
● Positive attitude
● 100% integrity
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington .
This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.
The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.
Primary responsibilities:
- Provides technical guidance and training relative to complex safety and airworthiness matters
- Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
- Review certification plans, write letters to regulators, and understand compliance process
- Leading cross-functional teams resulting in resolution of technical issues.
- Coordinate technical messaging and partnering with the FAA on regulatory issues
- Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
- Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
- Develop strategic action plans for changes to certification processes and execute those plans through completion
- Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans
Basic Qualifications (Required Skills and Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
- Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
- 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
- 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
- Experience with project management and self-managing projects.
- Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
- Ability to accomplish goals on a self-directed basis
- Experience leading cross-functional teams
Preferred Qualifications (Desired Skills and Experience):
- Experience in presenting data to customers, suppliers, and program and site leaders.
- Knowledge of software development and Digital Services product portfolio is preferred.
- Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
- Understanding of Safety Risk Management/Bowtie methodology.
- Experience working across the certification value stream
- Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
- Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
- Experience identifying web application impact due to changes in certification requirements
- Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
- Experience developing presentations and presenting to multiple levels of an organization
- Experience investigating and finding solutions to complex technical or regulatory issues
- Experience recognizing and balance conflicting priorities
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Experienced (Level 3): $114,750 - $155,250
- Senior (Level 4) $141,100 - $190,900
Applications for this position will be accepted until Mar. 21, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense Space & Security (BDS) is seeking an Experienced (Level 3) or Senior (Level 4 or Level 5) Systems Engineering Support Analyst to support the BDS Mission Assurance, System Safety and Safety Management Systems (SMS) organizations. This position is open to multiple locations.
Our team is currently hiring for a broad range of experience levels including, Experienced, Lead and Senior .
The selected candidate will be a core member of a fast-paced, productive, and close-knit engineering team. Mission Assurance & System Safety Engineers are integral to the entire product lifecycle to identify, analyze, mitigate and verify the safety hazard risk of our Boeing products. This includes collaboration with all facets of engineering from technology investment, concept development, requirements definition, and design, build, integration, test, and demonstration of products in their fielded environments.
Primary responsibilities:
- Develops, maintains, and communicates strategies, policies, and initiatives to enhance mission assurance, safety, and airworthiness of Boeing products and services.
- Assists to develop, gather and document basic technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program lifecycle.
- Assists with the application of systems engineering processes, methodologies and tools to the design of basic system of systems, systems and new product development.
- Assist with the development of best practices for Mission Assurance and Safety Engineers.
- Coordinate key milestones across BDS programs to ensure the timely execution of mission assurance F/TMARRs and independent reviews.
- Coordinate with Mission Assurance Division leaders to gain readiness status of customer commitments across 35 major BDS programs.
- Researches, analyzes, and compiles basic technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program life-cycle.
- Coordinate with Enterprise stakeholders on Enterprise Safety and Mission Assurance initiatives.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed locations.
Basic Qualifications (Required Skills and Experience):
- Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
- Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
- Level 5: 14+ years of related work experience or an equivalent combination of education and experience.
- Associate’ degree or higher
Preferred Qualifications (Desired Skills and Experience):
- Experience Preparing with and presenting to executives.
- Experience analyzing data and developing metrics to track performance to plan for a business / organization.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range :
- Experienced (Level 3): $92,650 - $143,750
- Senior (Level 4): $113,900 - $177,100
- Senior or Principal (Level 5): $139,400 - $216,200
#CASO
Applications for this position will be accepted until Mar. 24, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Lead development and documentation of complex electronic and electrical system requirements.
Translate requirements into system architecture, hardware/software designs, and interface specifications.
Lead testing and validation efforts to ensure system designs meet operational and functional requirements.
Oversee supplier performance monitoring to ensure system integration and compliance.
Lead troubleshooting during Installation and Check-Out and Production Acceptance Testing.
Review supplier drawing changes impacting production and update obsolete parts or design improvements.
Manage critical supplier performance and maintain Source Control Drawing requirements.
Collaborate with Supply Chain to formulate Requests for Information (RFI) for new equipment or long-lead items.
Support project management activities including work statements, budgets, schedules, and reviews.
Define and conduct critical tests to validate sensor design performance.
This position requires an Active US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.Secret clearance is required.
For Expert Engineer: Minimum 9 years of experience in design, integration, and test of electrical systems.
For Consultant Engineer: Minimum 14 years of experience in design, integration, and test of electrical systems.
Bachelor’s, Master’s, or Doctorate degree in engineering, computer science, mathematics, physics, or chemistry from an accredited institution.
An interim and/or final U.Secret clearance is required.
Proficiency with electronics lab instrumentation such as multiscope, TDR, signal/network analyzers, oscilloscopes, MIL-STD-1553B test tools, Agilent Fieldfox RF Test Set, fiber optics, and Ethernet.
Experience with product configuration management.
Knowledge of high frequency RF, digital, power, and analog test systems.
Experience managing and leading engineering projects.
Physical ability to lift test/cable equipment up to 35 lbs and navigate stairs.
Flexibility to work varied hours or overtime to meet production and integration schedules.
Familiarity with UNIX/Linux command line.
Experience leading teams of Factory/Flightline/Lab Technicians in fault isolation and troubleshooting of electrical wire assemblies and military electronic LRUs.
Ability to read and interpret wiring diagrams for aircraft connectors and wire bundles.
Relocation:
Relocation assistance is available for this position.
Boeing is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.
Shift:
This position is for 1st shift.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
Secret Security Clearance (U.Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Lead development and documentation of complex electronic and electrical system requirements.
Translate requirements into system architecture, hardware/software designs, and interface specifications.
Lead testing and validation efforts to ensure system designs meet operational and functional requirements.
Oversee supplier performance monitoring to ensure system integration and compliance.
Lead troubleshooting during Installation and Check-Out and Production Acceptance Testing.
Review supplier drawing changes impacting production and update obsolete parts or design improvements.
Manage critical supplier performance and maintain Source Control Drawing requirements.
Collaborate with Supply Chain to formulate Requests for Information (RFI) for new equipment or long-lead items.
Support project management activities including work statements, budgets, schedules, and reviews.
Define and conduct critical tests to validate sensor design performance.
This position requires an Active US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.Secret clearance is required.
For Expert Engineer: Minimum 9 years of experience in design, integration, and test of electrical systems.
For Consultant Engineer: Minimum 14 years of experience in design, integration, and test of electrical systems.
Bachelor’s, Master’s, or Doctorate degree in engineering, computer science, mathematics, physics, or chemistry from an accredited institution.
An interim and/or final U.Secret clearance is required.
Proficiency with electronics lab instrumentation such as multiscope, TDR, signal/network analyzers, oscilloscopes, MIL-STD-1553B test tools, Agilent Fieldfox RF Test Set, fiber optics, and Ethernet.
Experience with product configuration management.
Knowledge of high frequency RF, digital, power, and analog test systems.
Experience managing and leading engineering projects.
Physical ability to lift test/cable equipment up to 35 lbs and navigate stairs.
Flexibility to work varied hours or overtime to meet production and integration schedules.
Familiarity with UNIX/Linux command line.
Experience leading teams of Factory/Flightline/Lab Technicians in fault isolation and troubleshooting of electrical wire assemblies and military electronic LRUs.
Ability to read and interpret wiring diagrams for aircraft connectors and wire bundles.
Relocation:
Relocation assistance is available for this position.
Boeing is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.
Shift:
This position is for 1st shift.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Citizen, U.National, lawful permanent resident, refugee, or asylee.
Bachelor's Degree or Equivalent Required
Relocation
Relocation assistance is not a negotiable benefit for this position.
Security Clearance
Secret Security Clearance (U.Security Clearance that has been active in the past 24 months is considered active)
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
