Engineering Journal Jobs in South Windsor, CT

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Job Title: Distribution and Marketing Data Product Manager

Division: Beazley Shared Services - Data Management

Location: Multiple Locations, US

Hybrid Role

Reports To: Head of Data Products

Key Relationships: Chief Data Office, Data Leadership Team, Data Owners, Distribution and Marketing, CRM, Data Governance and Quality, Data Stewards, Data Architects, Delivery Team members, Technology Team, Finance, Underwriting, Operations and other Business Stakeholders

Beazley:

Beazley is a global specialist insurance company with over 30 years' experience helping people,

communities, and businesses to manage risk all around the world. Our products are wide ranging from cyber & tech to marine, healthcare, financial institutions, and contingency, covering risks like the weather, film production or protection from deadly weapons.

We are a flexible and innovative employer offering a friendly, collaborative, diverse and inclusive work environment. We encourage applications from all backgrounds. Collaboration in office spaces is important and we use a hybrid approach with a minimum of 2 days in the office per week.

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 1500 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We hire people with wide perspectives, and we have set bold diversity targets as we work towards excellence.

Data @ Beazley:

Our Data team supports Beazley's vision by...

* Being bold through pioneering & championing an exciting vision of how people interact with data

* Facilitating innovation by leading the pace of change in data & analytics, and facilitating the latest capabilities and innovative technologies

* Doing the right thing by providing a controlled working data environment that allows all business domains to thrive independently

* Being the single source of truth for enterprise-wide reporting metrics and KPIs

Our Data team is located at multiple offices across UK, Europe and the US. The specified home office location options provide the best balance for being co-located with key Data Office colleagues and business stakeholders.

The Role:

Data is one of Beazley's greatest assets and this roles is critical to supporting our Distribution and Marketing insights, which includes Customer, Broker and Marketing data. We're seeking a strategic and technically savvy Data Product Manager to lead the strategy, development and evolution of data products and insights that empower our distribution and marketing teams. This role is critical to aligning our data, unlocking insights, and informing growth opportunities across our specialty portfolio. In this role, you will also work to mature data literacy and capabilities as Beazley undertakes a significant investment in modernization, enabling you to embed a culture of data excellence and innovation in our delivery.

Key Responsibilities:

• Partner with the global Distribution and Marketing team to understand, prioritize and develop data products and insights that support their business strategy.

• Build and own a roadmap to provide regular updates on delivery commitments for data products, insights, enhancements and queries.

• Manage stakeholder relationships to support the growth strategy for Beazley customers, brokers, teams and products.

• Produce insights and key data trendsthat highlight business performance, RoI, efficiencies and game-changing growth opportunities.

• Inspire the adoption and use of insights to drive decisions in investment and operations that improve efficiency and drive growth by leading demonstrations and hands on training sessions.

• Lead a team of Product Owners, Product Analysts, Business Analysts and a development team to deliver and maintain data products and insights; maintaining a backlog of work within Jira.

• Represent the business in data governance discussions, escalating issues as appropriate.

• Ensure that data product development considers policy, methodology and standards, and ensure these are adhered to during product development.

• Evaluate the performance of your data product portfolio against KPIs defined by the business and provide feedback on the value delivered.

• Proactively anticipate business needs and look for opportunities to bring innovation or new approaches into the user design, experience, product development and insights.

• Relentlessly focus on the Distribution and Marketing team as a customer, delivering high quality data and insights that are clear and inspire action.

• Partner with the Data Governance Group and CRM solution team (Customer Relationship Management) to drive improvements in our Customer and Broker data quality through MDM and other tools.

• Provide leadership, direction, development and support to direct reports (including off-shore resources).

Essential Criteria:

• Bachelor's degree in Business, Marketing, Data Science, Computer Science, Economics, Statistics or related field; Master's degree preferred

• Proven experience in data product management, marketing analytics or distribution strategy, preferably in insurance or financial services

• Experience working with data, building data models, and sharing insights

Skills and Abilities:

• Strategic and curious with the ability to design and develop data and insights that support our Distribution and Marketing team's goals, planning, performance and incentives that drive growth

• Understand the specialty insurance market, customer segmentation and distribution channels, with experience in North America, Lloyd's, Retail and Wholesale markets preferred

• Ability to lead workshops that help your stakeholders identify data needs and articulate their desired user experience, with the ability to build dashboards preferred

• Strong organization and communication skills with the ability to direct work, document requirements and present demos

• Advanced technical skills with the ability to dive into the data, identify anomalies, and provide high quality, trusted data

• Understanding of Specialty Insurance principles and key drivers to create opportunities, loyalty and growth

Knowledge and Experience:

• Experience in Data Products, Data Analytics, Data Science, Statistics, Economics or related fields in Insurance, Financial or sales organizations preferred

• Strong understanding of MDM and CRM systems and their use with Customer and Broker data

• Proficiency in data visualization (Power BI), analytics platform (Snowflake), dashboard design and data storytelling

• Experience working with insurance data, and in particular a strong understanding of pipeline intelligence for sales growth/ targeting and performance

• Ability to use predictive modeling to drive an understanding of performance, customer behavior, and prospective renewals/ growth to help the Distribution Sales team focus on the best opportunities

• Experience managing relationships and teams of stakeholders, business analysts, data analysts, data architects, data modelers, data engineers and testers using agile processes

• Skills in data engineering technologies like Kafka, Snowflake / Snowpark, DataBricks, Jira and Agile principles

• Experience in managing and manipulating large internal and external datasets

• Knowledge of relational and dimensional database structures, theories, principles, and practices

• Driven and proven team player with ability to work with all levels in a highly intellectual, collaborative, and fast paced environment

• Excellent communication skills, with the ability to tailor them appropriately for different audiences, technical backgrounds, and seniority

Who We Are:

Beazley is a specialist insurance company with over 30 years' experience helping people, communities and businesses to manage risk all around the world. Our mission is to inspire our clients and people with the confidence and freedom to explore, create and build - to enable businesses to thrive. Our clients want to live and work freely and fully, knowing they are benefitting from the most advanced thinking in the insurance market. Our goal is to become the highest performing sustainable specialist insurer.

Our products are wide ranging, from cyber & tech insurance to marine, healthcare, financial institutions and contingency; covering risks such as the weather, film production or protection from deadly weapons.

Our Culture

We have a wonderful mix of cultures, experiences, and backgrounds at Beazley with over 2,000 of us working around the world. Employee's diversity, experience and passion allow us to keep innovating and moving forward, delivering the best. We are proud of our family-feel culture at Beazley that empowers our staff to work from when and where they want, in an adult environment that is big on collaboration, diversity of thought and personal accountability. Our three core values inspire the way we work and how we treat our people and customers.

• Be bold
• Strive for better
• Do the right thing

Upholding these values every day has enabled us to become an innovative and responsive organization in touch with the changing world around us - our ambitious inclusion & diversity and sustainability targets are testament to this.

We are a flexible and innovative employer offering a friendly, collaborative, and inclusive working environment. We actively encourage and expect applications from all backgrounds. Our commitment to fostering a supportive and dynamic workplace ensures that every employee can thrive and contribute to our collective success.

Explore a variety of networks to assist with professional and/or personal development. Our Employee Networks include:

• Beazley RACE - Including, understanding and celebrating People of Colour
• Beazley SHE - Successful, High potential, Empowered women in insurance
• Beazley Proud - Our global LGBTQ+ community
• Beazley Wellbeing - Supporting employees with their mental wellbeing
• Beazley Families - Supporting families and parents-to-be

We encourage internal career progression at Beazley, giving you all the tools you need to drive your own career here, such as:

• Internal Pathways (helping you grow into an underwriting role)
• iLearn (our own learning & development platform)
• LinkedIn Learning
• Mentorship program
• External qualification sponsorship
• Continuing education and tuition reimbursement
• Secondment assignments

The Rewards

• The opportunity to connect and build long-lasting professional relationships while advancing your career with a growing, dynamic organization
• Attractive base compensation and discretionary performance related bonus
• Competitively priced medical, dental and vision insurance
• Company paid life, and short- and long-term disability insurance
• 401(k) plan with 5% company match and immediate vesting
• 22 days PTO (prorated for 1st calendar year of employment), 11 paid holidays per year, with the ability to flex the religious bank holidays to suit your religious beliefs
• Up to $700 reimbursement for home office setup
• Free in-office lunch, travel reimbursement for travel to office, and monthly lifestyle allowance
• Up to 26 weeks of fully paid parental leave
• Up to 2.5 days paid annually for volunteering at a charity of your choice
• Flexible working policy, trusting our employees to do what works best for them and their teams

Salary for this role will be tailored to the successful individual's location and experience. The expected compensation range for this position is $130,000-$150,000 per year plus discretionary annual bonus.

Don't meet all the requirements? At Beazley we're committed to building a diverse, inclusive, and authentic workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement and qualification in the job specification, we encourage you to apply anyway. You might just be the right candidate for this, or one of our other roles.

We are an equal opportunities employer and as such, we will make reasonable adjustments to our selection process for candidates that indicate that, owing to disability, our arrangements might otherwise disadvantage them. If you have a disability, including dyslexia or other non-visible ones, which you believe may affect your performance in selection, please advise us in good time and we'll make reasonable adjustments to our processes for you.

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

In the aerospace industry, a Program Manager serves as the central bridge between design engineering and full-scale manufacturing. This role is high impact, requiring a strategic thinker who can navigate complex technical requirements and rigorous regulatory standards to ensure products are optimized for both scalability and efficiency.

Core Responsibilities

• 
  
• Project Lifecycle Leadership: Own the execution of new products from initial design handoff through prototyping, pilot builds, and final transition to production.
  
• Cross-Functional Coordination: Lead integrated teams across engineering, supply chain, quality, and finance to ensure alignment of program goals.
  
• Resource & Budget Management: Work with cross functional groups to develop end-to-end manufacturing plans, including detailed schedules, resource allocation, and budget oversight to maintain project costs within 5-10% of estimates.
  
• Risk & Change Mitigation: Proactively identify delivery risks, manage engineering changes through disciplined configuration control, and develop contingency plans for roadblocks.
  
• Operational Readiness: Ensure manufacturing systems, tooling, and supply chains are ready for high-volume production, including making critical "make/buy" decisions.
  
• Stakeholder Management: Act as the primary point of contact for customers, providing regular status updates on milestones, KPIs, and delivery performance.
  

Required Qualifications

• 
  
• Education: A Bachelor's degree in Engineering (Mechanical, Industrial, or Aerospace), Business Management, or Operations Management is typically required.
  
• Experience: At least 3-7 years of experience in aerospace manufacturing or a similar fast-paced engineering environment.
  
• Certifications: PMP (Project Management Professional) certification is frequently preferred or required to demonstrate formal methodology expertise.
  
• Technical Proficiency: Deep understanding of manufacturing processes (e.g., precision machining, assembly), ERP/MRP systems, and product lifecycle management (PLM) tools.
  
• Regulatory Knowledge: Familiarity with Aerospace Quality & Compliance standards (such as AS9100 or FAA regulations) is often essential.
  

Key Performance Indicators (KPIs)

Aerospace NPI managers are often measured by their ability to:

• 
  
• Consistently meet Contract Ship Dates for complex projects.
  
• Achieve On-Time Delivery (OTD) and milestone completion targets.
  
• Maintain high Quality Standards and production yields during the ramp-up phase.
  

This position is currently accepting applications.

Apply Now

Accountability:

Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.

Essential Functions and Duties:

• 
  
• Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
  
• Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
  
• Analyze engineering drawings for materials, process fabrication and design elements.
  
• Specify patterns on programming sheet for way part is to be machined.
  
• Assure program meets target cycle time and program generates geometry to customer requirements.
  
• Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
  
• Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
  
• Support lean activities both within the Engineering group and across the organization.
  

Complexity of Tasks:

Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.

Qualifications:

• 
  
• Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
  
• Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
  
• Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
  
• 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
  
• CAD/CAM software: Siemens NX and MasterCam required
  
• Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
  
• CG Tech Vericut experience required.
  
• Capable of debugging programs and working closely with shop floor and inspection personnel.
  
• Some tool design experience preferred.
  
• Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
  
• Must be a team player and have the ability to work closely in a shop environment.
  
• Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
  
• Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
  

This position is currently accepting applications.

Apply Now

Plans and designs manufacturing processes throughout the plant. This position maximizes efficiency by analyzing all aspects of manufacturing processes. Determines parts and tools needed to achieve product specifications and business objectives.

Essential Duties & Responsibilities:

Under general direction, performs the management of projects related to aerospace component engineering and manufacturing for new and existing parts and assemblies. Establishes manufacturing methods and process sequence necessary to complete parts. Creates models, operation sheets and work instructions using Solidworks software. Initiates Tool & Fixture design concepts and maintains close feedback with other shop floor personnel, management and related customers and vendors. Troubleshoots manufacturing problems and implements method and tool improvements. Writes rework and repair methods for non-conformances and prepares projects timelines. Participates in discussions with customers and suppliers as required. Performs additional duties as requested, including cost estimating.

Required Knowledge, Skills, & Abilities:

• 
  
• Reads and interprets blueprints, symbols and geometric tolerances based on military and commercial specifications.
  
• Able to process complex assemblies and conceptualize developmental and production tooling in a job shop environment.
  
• Proficient with the following software applications: Solidworks (or equivalent), MS Project / Word / Excel.
  
• Able to create Solid models, operations sheets, Tool and Fixture designs.
  
• Familiarity with specifications and requirements for aerospace component manufacturing that includes having knowledge of aerospace coatings, heat treatment, and machining specifications.
  
• Strong math background including trigonometry and geometry.
  
• Able to research, understand and implement new technologies for possible cost savings and process improvements.
  
• Good verbal and written communication skills and the ability to work well with others in a team-based environment.
  
• Able to perform hands-on shop work.
  
• Proficient in project management.
  

Working Conditions:

Normal office working conditions with the absence of disagreeable elements. Manufacturing Engineers spend a good amount of time on the shop floor.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

Education & Experience Required:

• High School Diploma or equivalent and 3-5 years' experience in an aerospace manufacturing environment.
• Prior experience to range from engineering to expediting on shop floor utilizing detailed team input for instruction/directions.
• AS/BS in Engineering Science is advantageous.

This position is currently accepting applications.

Apply Now

Title: New Product Introduction Engineer

Job Summary:

The incumbent will be responsible for project management from development through production launch for new products.

Supervisory Responsibilities: None

Duties/Responsibilities:

• Collaborate with customers, marketing, sales, manufacturing, engineering, and quality engineering to shepherd new programs from concept development to commercial launch.
• Position serves in a results-driven environment and requires a team-oriented individual.
• Develop project and manufacturing costs to support sales and marketing in business case development and program justification.
• Ability to understand customer requirements and translate those requirements into a manufacturable product design.
• Establish engineering / scientific objectives for projects.
• Coordinate tooling design, fabrication, start-up, and production ramp-up then turn over to manufacturing for new programs.
• Finalize specifications, designs, and contract reviews for specific market responsibilities.
• Ability to manage multiple projects at one time to agreed timelines and budgets.
• Independently plan and execute projects – i.e., program management
• Evaluated based on execution to the project timeline.
• Evaluated based on customer satisfaction.
• Evaluated on the successful launch of products to production.

The expectations for managing the programs are:

• Manage the phase gate process from purchase order receipt, through development and production release.
• Assemble a multi-disciplinary team (assigned by department managers) to execute project activities.
• Hold a kick-off meeting to launch the project.
• Create and maintain a project Gantt chart for schedule and critical deliverables.
• Hold review meetings as programs progress towards production.
• Participate in technical meetings.
• Manage customer meetings.
• Manage suppliers in the development phase.
• Generate presentations on project status.
• Mange the hand off of a project to production and the production sign-off of a project
• Participate with the team in a “hands on” manner: assist in writing / review of documents, assist with taking product samples, machine operation, manufacturing process review, and physical review of product quality.

Required Skills/Abilities:

• 3+ years of experience in manufacturing, product realization, or an applied industrial environment.
• Experience with automotive, aerospace, or medical manufacturing and quality systems desired. Proficiency in reading engineering prints along with an understanding of geometric dimensioning and tolerancing (GD&T).
• Skilled in utilizing spreadsheets for calculations, task management, and documentation.
• Manage team priorities and open tasks.
• Able to lead team meetings.

Experience & Education Requirements:

Bachelor of Science in Engineering or ten years of experience in manufacturing and program management.

Physical Requirements:

• Prolonged periods of sitting at a desk and working on a computer.
• Must be able to lift 15 pounds at times.
• Must be able to access and navigate each department at the organization’s facilities.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.