Engineering Journal Jobs in River Grove

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

About the Company

HSG Tech Inc. is an American Subsidiary of HSG Laser who is a fast-growing supplier in the global metal forming solution industry. We believe intelligent manufacturing changes future. Customers in 100+ countries have used and recognized our equipment and service. Please visit the web site for details about HSG: Function:

• Has overall responsibility for the strategic leadership and operational excellence of the service department.
• Builds scalable infrastructure, implements efficient processes, and fosters a culture of continuous improvement to support long-term customer relationships and business growth.
• Ensures the delivery of high-quality post-sale support through effective service request management, field service coordination, and customer satisfaction initiatives.

Primary Responsibilities:

Strategic Service Leadership

• Defines and execute a long-term vision for the service organization that aligns with company goals and customer expectations.
• Leads initiatives to improve service delivery, reduce equipment downtime, and enhance customer experience.
• Establish and monitor service performance metrics, driving accountability and operational excellence.

Service Operations Management

• Oversees the full lifecycle of service requests, ensuring timely, accurate, and professional resolution.
• Directs field service teams and technical support staff, optimizing scheduling, resource allocation, and responsiveness.
• Ensures compliance with warranty policies, service agreements, and industry regulations.

Customer Experience & Satisfaction

• Champions a customer-centric approach across all service functions.
• Implements feedback mechanisms, satisfaction surveys, and follow-up protocols to measure and improve service quality.
• Serves as a senior escalation point for complex service issues and high-value customer relationships.

Secondary Responsibilities:

Process & Infrastructure Development

• Designs and implements scalable service processes, workflows, and systems to support growth and efficiency.
• Builds infrastructure where gaps exist, creating structure in areas of ambiguity and evolving needs.
• Leads digital transformation efforts within the service department, including CRM and service management platforms.

Team Development & Leadership

• Recruits, trains, and mentors a high-performing service team, fostering technical expertise and leadership capabilities.
• Conducts performance evaluations, succession planning, and professional development initiatives.

Reporting & Analytics

• Delivers executive-level reporting on service performance, customer satisfaction, and operational trends.
• Uses data-driven insights to inform strategic decisions and continuous improvement efforts.

Cross-Functional Collaboration

• Partners with engineering, sales, and product teams to ensure service readiness for new product launches and customer feedback integration.
• Represents the service function in leadership meetings and strategic planning sessions.

Position Requirements:

Education & Experience

• Bachelor’s degree in Engineering, Business Administration, or related field desired.
• Minimum 10 years of experience in service operations, with at least 5 years in a senior leadership role within an OEM manufacturing or industrial environment as a Service Manager.
• Proven experience managing technical service teams and developing service infrastructure.

Skills & Competencies

• Strategic thinker with strong operational execution capabilities.
• Exceptional leadership, communication, and interpersonal skills.
• Proficiency in CRM, ERP, and service management platforms.
• Strong analytical skills and ability to interpret complex data sets.
• Deep understanding of machinery, industrial equipment, or technical service environments.

Other Requirements

• Ability to travel to customer sites, manufacturing facilities, and industry events as needed.
• Comfortable working in fast-paced, evolving environments and creating structure where ambiguity exists.
• Demonstrated resilience and adaptability in navigating change and leading through uncertainty.

HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Cullerton Group has a new opportunity for a UI/UX Designer 4. The work will be done onsite or hybrid depending on the customer's preference (Chicago, IL or Peoria, IL; currently hybrid but transitioning to full-time onsite). This is a long-term position that can lead to permanent employment with our client. Compensation is up to $77/hour + full benefits (vision, dental, health insurance, 401k, and holiday pay).

Job Summary

We are seeking a Senior UI/UX Designer to lead the design of complex, data-driven digital experiences across enterprise platforms. This role focuses on creating intuitive, scalable, and user-centered solutions for applications involving analytics, monitoring, and workflow optimization. The designer will collaborate closely with cross-functional teams including product, engineering, and data to deliver high-quality user experiences. This position requires strong expertise in end-to-end product design, design systems, and usability validation in a fast-paced Agile environment.

Key Responsibilities

• Lead UX/UI design for complex workflows, including dashboards, analytics, onboarding, and reporting experiences

• Translate business requirements and user needs into intuitive, user-centered design solutions

• Create high-fidelity UI designs, prototypes, and interaction models using industry best practices

• Collaborate with Product Managers, Engineers, and stakeholders to shape product direction and ensure successful delivery

• Contribute to and maintain design systems, ensuring consistency, scalability, and accessibility across applications

Required Qualifications

• Bachelor's and/or Master's degree in Design, Human-Computer Interaction, or related field

• 8+ years of experience in UX/UI or product design within enterprise or B2B environments

• Strong proficiency in design tools such as Figma and experience with design systems

• Experience working in Agile environments and collaborating with cross-functional teams

• Strong understanding of user research, usability testing, and interaction design principles

Preferred Qualifications

• Experience designing data-heavy applications, dashboards, or monitoring platforms

• Experience working within large, complex organizations or global product teams

• Familiarity with enterprise design systems and scalable UX frameworks

Why This Role?

This position offers an opportunity to contribute to meaningful engineering and design work that supports a global leader in heavy machinery and manufacturing. Cullerton Group provides a professional environment with growth potential and a strong partnership with Caterpillar.

Maintenance Manager - Hands on

• Maintenance Manager
• Food Manufacturer
• Chicago, IL
• Days, Monday–Friday
• $100,000 – $110,000

A food production company is seeking a hands-on Maintenance Manager. You'll oversee daily maintenance operations, improve equipment reliability, and support a safe, efficient plant. Ideal for a strong, mechanically skilled supervisor looking for a clear step up.

Key Duties:

• Lead and schedule Maintenance Technicians (team of 5) to support production.
• Oversee preventive and predictive maintenance for equipment and facility systems.
• Troubleshoot mechanical, electrical, pneumatic, and control issues to minimize downtime.
• Ensure compliance with OSHA, GMPs, HACCP, and company safety/quality standards.
• Partner with Production, Quality, and Engineering on improvements and upgrades.
• Manage spare parts, maintenance spend, and vendor relationships.
• Maintain accurate work orders and asset histories in the CMMS.
• Support new equipment installs, capital projects, and commissioning.
• Track and report KPIs such as downtime and work order completion.
• Build team capability through training, coaching, and continuous improvement

Qualifications:

• 5+ years of maintenance experience in food manufacturing or a regulated processing environment.
• Previous leadership or supervisory experience strongly preferred.
• Solid technical knowledge across mechanical, electrical, PLC troubleshooting, pneumatics, hydraulics, HVAC, and refrigeration.
• Ability to lead maintenance teams and drive equipment performance improvements.
• Experience working in cold environments (freezers/chillers) is a strong plus.

How To Apply

• Contact: Mark Watton
• 773-747-7676 or
• If you would like to find out more, simply click apply.

This position is commutable from: Oak Park, Forest Park, Cicero, Berwyn, Maywood, Elmwood Park, La Grange, Westchester, Brookfield, Skokie, Evanston, Lincolnwood, Oak Lawn, Bridgeview, and Burbank

Relevant Job Title: Maintenance Manager, Maintenance Supervisor, Maintenance Superintendent, Maintenance and Engineering Manager, Maintenance Lead

All applicants must live in the USA and be eligible to work and live in the USA. Please note, our client is unable to offer Sponsorship or Visa support for this role.

Due to the sheer volume of applications, we will only contact successful applications. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful.

Axion Recruitment is working as a recruitment agency in relation to this vacancy.

IND2

Position Description:

The Quality Manager will lead and oversee the Quality function at the Morton Grove site, ensuring compliance with GMP regulations, global quality standards, and customer expectations. This role will manage a team of Quality professionals and work closely with cross-functional departments to support the delivery of high-quality clinical and commercial batches.

The ideal candidate brings strong leadership skills, a solid understanding of CDMO business dynamics, and hands-on experience with clinical GMP manufacturing environments.

Role & Responsibilities:

• Lead and manage the Quality Assurance and Quality Control teams at the site, as well as working with Global Regulatory Affairs for RA topics.
• Ensure compliance with GMP regulations, global quality standards, and customer requirements for API manufacturing.
• Oversee batch release activities, including review and approval of clinical and commercial GMP batches.
• Develop, implement, and maintain Quality Systems (deviations, CAPA, change control, investigations, audits, etc.) to ensure a state of continuous compliance and inspection readiness.
• Act as the primary quality contact for clients, regulatory authorities, and internal stakeholders for the site.
• Support regulatory inspections and client audits; ensure timely and effective closure of observations.
• Collaborate closely with Operations, Engineering, Regulatory Affairs, and Project Management to support manufacturing and technology transfer activities.
• Drive continuous improvement initiatives to enhance quality performance and operational efficiency.
• Manage and develop the Quality team through effective leadership, training, and performance management.
• Contribute to the site’s strategic planning as part of the site leadership team.

Experience & Requirements:

• Bachelor’s or master’s degree in chemistry, Pharmacy, Chemical Engineering, or related field.
• Proven experience in a CDMO environment, working with multiple customers and projects.
• Strong experience with clinical GMP batch manufacturing and release.
• Previous experience managing and developing teams.
• In-depth knowledge of ICH guidelines, GMP regulations (e.g., EU GMP, US FDA), and regulatory expectations.
• Excellent communication skills and ability to interact effectively with internal and external stakeholders.
• Strong problem-solving and decision-making skills
• Minimum 5 years of experience in Quality roles within the pharmaceutical or chemical API industry.

Job Description: Sr. Project Manager

Reports To: Director of Operations

FLSA: Exempt

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

Company Overview

Admiral Heating has been a trusted leader in commercial and industrial HVAC solutions in the Chicagoland area for over 70 years. Specializing in union construction projects and service work, we partner with contractors, developers, and building owners to deliver custom engineered heating, ventilation, and air conditioning solutions. Our reputation is built on quality workmanship, deep industry relationships, and a commitment to long-term customer success.

Admiral Heating operates on EOS (Entrepreneur Operating System). Our Core Values which we require all employees to exemplify are: Safety and Quality First, Intensely Diligent, Own it!, Innovative Approach, Proudly Humble of our Reputation and Exceed Expectations.

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

Job Duties and Responsibilities:

• Preparation of project budget based on the takeoff estimate
• Plan, organize and manage the construction project in all areas from start to successful completion including contract proposal, budget, change orders, materials procurement, billing, and collection.
• Comply with project contract including legal notifications, scope administration, change order procedures, billing, contract schedules, claims procedures and other contract requirements.
• Responsible for cost management. Monitor efficiency and production for compliance with labor budget.
• Work with field and others on the project team to maintain project tracking and reporting to ensure work progress and budget compliance.
• Control, collect and disseminate all project documentation.
• Maintain professional and timely communication with the general contractor, design team, owner, subcontractors, various company divisions and other key participants.
• Ensure the procurement of major equipment and fixtures
• Assure that all production meets quality control standards. Protect and mitigate liability.
• Support and participate in the company safety program.
• Take off, estimate and Formulate change order requests in a timely and efficient manner and updated internal budgets.
• Proactively manage construction costs to promote the overall projects success
• Communicate with management, vendors, and construction team as necessary.
• Responsible for ensuring project management team delivers projects within estimated gross profit
• Assist estimating team as requested

Qualifications, Competencies, & Abilities:

• Structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
• Excellent time management and organizational skills.
• Self-Motivated, with the ability to work with little or no supervision.
• Strong level of attention to detail.
• Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
• Excellent interpersonal skills, and the ability to communicate information and ideas both verbally and written so others will understand.
• Ability to manage and prioritize multiple projects and deadlines.
• Work and communicate effectively with individuals at all levels, including executives.

Physical Demands and Working Environment:

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

• Environment: Work is performed primarily in a standard office environment.
• Physical: Primary functions require sufficient physical ability and mobility to work in an office setting; to stand or sit for prolonged periods of time; to occasionally stoop, bend, kneel, crouch, reach, and twist; to lift, carry, push, and/or pull light to moderate amounts of weight; to operate office equipment requiring repetitive hand movement and fine coordination including use of a computer keyboard; to travel to other locations using various modes of private and commercial transportation; and to verbally communicate to exchange information.
• Vision: See in the normal visual range with or without correction.
• Hearing: Hear in the normal audio range with or without correction.

Education and Experience:

• Bachelor’s degree in project management, engineering, finance or business from an accredited college or university or associate’s in business or accounting preferred.
• Fluent with Microsoft Office Suite.
• 7 Plus Years’ experience in related industry or Project Management field is preferred
• Extensive knowledge of HVAC, Duct work and piping

Compensation & Benefits

• Base Salary range $120,000 - $180,000
• Bonus and Profit Sharing up to 30% of base salary
• Fidelity 401k Plan with all fees paid by Admiral
• 401k Safe Harbor Match of 4%
• BCBS PPO and HMO Health Insurance Options (Admiral pays 75%)
• Dental and Vision Plans (Admiral pays 75%)
• Tuition Reimbursement
• Generous PTO Policy
• Paid Holiday’s
• 100% Admiral paid Long and Short Term and Short
• $20,000 Admiral Paid Life Insurance
• Flexible Spending and Dependent Care Accounts
• Employee Assistance Plan
• CTA and Parking Reimbursement
• Employee events throughout the year

IF INTERESTED IN THIS POSITION, PLEASE EMAIL RESUME TO:

This job description does not list all the duties of the job. You may be asked by managers to perform other instructions and duties. This job description may be revised from time to time and does not constitute a contract for employment.

The Senior Procurement Analyst will support and execute data-driven sourcing strategies for consumable and expendable (C&E) materials, rotable and repair components for different business groups within the company. This role sits at the intersection of sourcing, analytics, and supply planning leveraging supplier data, forecasting outputs, and inventory planning concepts to inform sourcing decisions.

The ideal candidate has prior hands-on sourcing and contracts experience and is comfortable working with spend management software such as Coupa, SAP Ariba and Zycus, forecasting tools, and BI tools such as Domo, Power BI and Tableau, to support supplier strategy and sourcing decisions in a fast-paced environment.

What you will be responsible for:

• Own direct strategic sourcing for MRO materials and repair services, translating forecast demand and supply plans into multi-year sourcing strategies rather than transactional buying.
• Lead and support RFQs/RFPs, supplier negotiations, and award recommendations, ensuring alignment with cost targets, capacity constraints, quality requirements and contractual terms.
• Evaluate sourcing options using a Total Cost of Ownership (TCO) lens cost, lead time, MOQ, validity to support informed supplier selection decisions.
• Interpret outputs from internal forecasting tools and historical demand data to inform direct sourcing strategies, supplier capacity discussions and volume-based or long-term agreements.
• Demonstrate working knowledge of time-series concepts such as trend, seasonality, variability and forecast error.
• Apply a practical understanding of supply chain planning concepts safety stock, reorder point (ROP), lead time variability, and service levels - to evaluate sourcing options and understand their implications for cost, availability, and supplier strategy.
• Use SQL to extract and analyze spend, demand, pricing, lead time, and supplier performance data from ERP and planning systems.
• Use Python for data analysis, automation, and modeling related to pricing trends, demand variability, and sourcing scenarios.
• Develop and maintain BI dashboards (Power BI, Tableau, or similar) to track KPIs including cost savings, supplier OTD, contract coverage, pricing compliance and contract performance.
• Translate analytical insights into clear, actionable recommendations for sourcing and operations leadership.
• Monitor supplier performance against cost, quality, delivery, turnaround, and capacity commitments.
• Identify risks related to forecast volatility, long lead times, single-source suppliers, and constrained repair capacity.
• Support supplier performance reviews and continuous improvement initiatives.
• Work closely with Maintenance, Planning, Engineering, Quality, and Finance teams to align sourcing with operational and customer requirements.
• Assist with contract reviews, pricing agreements, and service-level terms informed by forecasted volumes.
• Ensure sourcing activities comply with FAA, EASA, AS9110, and internal quality standards.
• Maintain sourcing documentation to support audits and customer requirements.
• Adhere to ethical sourcing and procurement policies.

What you need to be successful in this role:

• Bachelor's degree in supply chain management, Business, Engineering, Data Analytics or related fields.
• 3-5 years of experience in strategic sourcing, procurement or supply chain roles.
• Prior hands-on sourcing experience is required (RFPs, supplier negotiations, supplier selection).
• Working knowledge of forecasting concepts and supply chain planning fundamentals (e.g. safety stock, ROP, EOQ, lead time variability and service levels).
• Experience using spend management software (Coupa, SAP Ariba, Zycus).
• Experience using or supporting demand planning/forecasting and inventory planning tools
• Experience using BI tools (Domo, Power BI, Tableau)
• Strong proficiency in SQL for data extraction and analysis.
• Working proficiency in Python for data analysis and automation.

Preferred:

• Master's degree preferred. Experience in aviation MRO, aerospace aftermarket, or similarly regulated environments.
• Familiarity with MRO ERP and Planning Systems (AMOS, Ramco, Trax, SAP, Oracle).
• Familiarity with FAA, EASA and AS9110 quality requirements.
• Professional certification (CPSM, CSCP, CIPS) a plus.

The rewards of your career at AAR go far beyond just your salary:

• Competitive salary and bonus package
• Comprehensive benefits package including medical, dental, and vision coverage.
• 401(k) retirement plan with company match
• Generous paid time off program
• Professional development and career advancement opportunities

Physical Demands/Work Environment:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment. AAR provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.

Compensation:

The anticipated salary range for this position is $85,000 to $99,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. [In addition to base pay, this role is eligible for a bonus.] AAR offers a competitive benefits package, including medical/dental/vision/life/and AD&D insurance, 401(k) savings plan with employer match, paid time off and holiday pay, as well as opportunities for professional development and growth.

#LI-MA1 #LI-ONSITE