Engineering Journal Jobs in Pa

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Minimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required.  CBET certification preferred.

Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Work Location Type

Onsite

About VLS!

VLS Environmental Solutions, LLC, is a recognized leader in providing sustainability solutions, with three divisions providing industry-leading services. With a mission to innovate solutions to meet clients' sustainability goals, VLS has over 1,200 employees in 40+ locations across North America.

Waste Services

VLS Waste Services provides customized waste processing solutions for hazardous and non-hazardous industrial and commercial waste, including landfill diversion and sustainability programs, solidification of liquid waste, recycling, wastewater treatment, and waste sequestration.

Railcar Services

VLS Railcar Cleaning and Repair Services division provides specialty cleaning services for difficult-to-clean products, including chemicals, hardened materials, and pressurized gases, and comprehensive repair services for certified full-service repairs, tank car qualifications, and maintenance.

Marine Services

VLS Marine Services division offers state-of-the-art barge cleaning, repair, and gas-free facilities for various chemical solvents and downstream petroleum products.

Job Summary

VLS Environmental Solutions LLC is the recognized industry leader in providing environmental solutions to our industrial and manufacturing clients. A financially stable company that has experienced significant organic and inorganic growth over the past several years, VLS offers the perks of a big company (competitive pay, great time off packages, and solid benefits, including paid life insurance and a 401(k) match of up to 5%) combined with the collaborative and results-driven culture of a small one.

The Diesel Fleet Mechanic position optimizes the department workflow, quality, & efficiency through maintaining equipment in a well-trained & an effective / collaborative team environment. This position supports the fleet and is responsible for maintaining mobile equipment and systems to provide dependable support to the Lancaster, PA and Baltimore, MD locations. They will support the fleet in an accurate and efficient manner while observing regulatory requirements and company safety policies / procedures.

Responsibilities

• Performs inspection, maintenance, & repairs on heavy duty vehicles (trucks, tow motors, trailers, etc.)
• Responsible for diesel engines, transmissions, brake systems, electrical trouble shooting, steering, & cooling systems
• Tracks and monitors all maintenance work through the RTA software program
• Repairs and maintains mechanical equipment:
• Ensures all jobs in the shop and plant area are completed in a proficient and safe manner
• Uses computers to issue parts and update comments on work orders/task list including diagnostic programs for engines and hydraulic systems, etc.
• Ensures all personal protective equipment is used as needed
• Monitors garage / plant for supply stock and cleanliness
• Establishes & maintains effective communication / coordination with staff & management:
• Coordinate with dispatch / drivers to schedule routine maintenance & discuss problems
• Provide professional & respectful treatment to drivers, visitors, employees, & management
• Inform management of area activities & significant problems
• Carry a communication device & monitor it at all times while clocked in
• Performs other duties as required

Qualifications

• High School Diploma/GED
• Mechanical knowledge of tools and machines, including their uses, repair, & maintenance required
• Valid Class A CDL strongly preferred
• 1-5 years’ related experience preferred
• Basic Welding Experience preferred
• Must pass pre-employment criteria
• Must be 21 years of age or older
• Must be able to obtain TWIC clearance
• Must be able to pass a DOT physical & drug screen
• Must be able to pass a background check
• Must be able to read and comprehend service and repair manuals
• Must be able to work independently with minimal supervision
• Must keep work area clean, organized, and safe

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this position, the employee is regularly required to:

• Ability to move hand together with arm or two hands to grasp, manipulate or assemble objects
• Must be able to lift up to 50 lbs, and occasionally be required to lift up to 100 lbs
• Understand written sentences and paragraphs in work related documents
• Must be able to stand; walk; sit; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and smell
• Work near moving mechanical parts and in a loud environment
• Ability to coordinate two or more limbs (for example, two arms, two legs, or one arm and one leg) while sitting, standing or lying down
• Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate or assemble small objects.
• See, hear and verbally communicate. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

The above statements are intended to describe the general nature and level of the work being performed by person/people assigned to this work. These are not to be construed as an exhaustive list of all duties, responsibilities, and skills associated with it. VLS reserves the right to amend and change responsibilities to meet business and organizational needs.

What's in it for you!

At VLS our employees are the core of our business. As such, we value our employees' physical, mental, and financial wellbeing by providing first class, high value benefits and resources that are centered around a proper work-life balance.

Physical and Mental Wellbeing: VLS is committed to supporting our employees' physical and mental health by providing:

Medical, Dental and Vision Insurance - Based on each employee's need, we offer various high quality, low-premium medical, dental and vision plans, which include our first-in-class concierge service (available in Spanish) and 2nd MD Offering.

Flexible Spending Accounts (FSA) and Healthcare Saving Accounts (HSA) - Set aside pre-tax money to use toward your health care spending. VLS provides an employer contribution to all HSA accounts.

Time Off - We offer 11 (eleven) company-paid holidays, in addition to our paid time off and voluntary time off plans.

Employee Assistance Program - 24/7 assistance and counseling services that are 100% confidential and free to all employees and their dependents.

Telemedicine - All employees and dependents receive free virtual visits by licensed practitioners any time, any day...including holidays!

Financial and Retirement Planning: At VLS we offer the following to assist our employees with planning around their finances and saving for retirement:

401(k) - Generous 401(k) matching program after 90 days of employment. VLS will match up to 5% of your pay every pay period. Matching contributions are 100% vested immediately.

Life and Disability Insurance - Employer-paid life insurance, along with short-term and long-term disability coverage provided to all full-time employees.

Voluntary Life Protection Plans - Employees and their dependents can elect coverage in our voluntary life/add, critical illness, hospital indemnity and accident plans.

Rewards and Recognition Programs - We celebrate our employees! From birthdays to anniversaries and other various milestones/achievements, we have programs in place to recognize our employees.

Financial Planning - Free One on One financial planning with a certified Financial Planner/Coach.

Employee Discount - Employee Discount Program for savings on everyday goods and services at various retailers throughout the US.

This role will help lead LNG Project Controls in newly created Project Controls Organization at UOP and will standardize program analytics, tools, and reports for a portfolio of programs, while enabling predictive analytics to aid in timely decision-making during execution. This role will support Honeywell business and program management leaders to ensure data integrity by enforcing compliance to management operating system and processes.

Join the specialist team that provides program analysis, process improvement, and metrics for Honeywell. You will lead the development of program plans, ensure cost and schedule integration and estimate at completion management on critical new and large complex programs across multiple sites. You will influence and collaborate with internal and external stakeholders to accept new concepts, practices, and approaches to program management.

This job will be a hybrid arrangement, located in Allentown, PA.

Key Responsibilities

• Coordinate the PCO team activities of projects managed through the UOP PCO, to ensure a good financial and operational control of this project business portfolio
• Advance skills on project cost control activities in project business environment. Accountable for accuracy & timely delivery of all project & management estimates, reports & forecasts for costs, revenue, billing & schedules on allocated projects
• Lead the implementation of the standard Project Controls tool sets and work processes on all projects in the allocated area
• Set up processes and structure to centralize PCO reporting requirements
• Implement project scheduling standards, templates, and model plans for the allocated area
• Support the LOB Operational Leaders in managing project reviews, controls, and reporting processes for the allocated area
• Responsible for the project controls set up process on large strategic projects supported in the PCO
• Responsible for supporting the AOP and forecast process with the Project Controls Leader
• Ensure integration of work processes to other UOP Regions and CoE groups
• Recruit, assign and manage Project Controls resources for the allocated area
• Develop and implement the Project Controls employee development plans and supporting infrastructure in the allocated area
• MS Office applications, SAP Projects Module, Primavera Project Planner.
• Tracking and measurement systems (implement, maintain), Project reporting (periodic, final, benchmark)
• Change management systems (implement, maintain)
• Estimating tools/techniques (types, scoping, components, templates, TPC
• Project scope definition and execution planning (as basis for identifying changes)
• Contract and subcontract administration (concepts and work processes)
• Global Project Management (methodology and tools)
• Business planning and analysis tools and Earned value (progress & productivity measurement)
• Finance (concepts and work processes), Cost risk analysis and contingency management, Cash flow (planned, actual, forecast)
• Project Controls Analysis (data, indices, variances, trends, projects), Planning and Integrated scheduling (concepts and work processes)
• Resource management loading (concepts and work processes)

YOU MUST HAVE

• Minimum 6 years related project controls experience
• Experience in oil & gas, utility, or EPC industry

WE VALUE

• BS Engineering Management; Business or Finance degree; or commiserate related experience
• Analytical skills
• Time management & resource allocation & utilization
• Negotiation and conflict management skills
• Performance management and coaching/counselling
• Risk management
• Presentation skills
• Business planning and analysis
• Leadership & team management skills
• Degree in Business, Science or Engineering, Finance or Accounting or related field
• Experience in Earned Value Management
• Ability to influence at varying levels across the organization
• Ability to Convey information with clarity and directness, ensuring the message is understood across diverse, global teams
• Project Management certification
• Proficient Microsoft Office package skills e.g. Excel, Project, Outlook, PowerPoint etc.
• Ability to deliver on complex situations or problems without guidance or supervision

Construction Site Manager

Braddock, PA, 15104 Onsite

Pay range: $45-55/hr on W2

Electrical Construction Coordinator, Field Management; 40 hours to start; however when the project gets started it will be 60+

Years of Experience Required: 0-3 years

Job Description:

The Construction Manager (CM) is the project representative that have been delegated authority and responsibility of administering the field operations of the construction project. The CM will perform all aspects of field administration, including implementation of a safety plan and a quality control plan. The Construction Manager will be responsible for developing, evaluation of, and execution of construction plans for various projects as assigned. This will include significant outage planning and coordination with operating entities and contractors.

Job Responsibilities:

Function: The two primary functions of the Construction Manager is to perform evaluations of construction plans for safety, feasibility and efficiencies and to perform construction management for specific projects as assigned at the various Client locations.

Accountable for:

The Construction Manager will be responsible for the safety, cost and schedule performance of the construction efforts assigned. Deliverables: The deliverables required will vary based on the requirements unique to each assigned project, but will generally consist of:

1. Assist in the development of the progress schedule; generating, gathering, and confirming all information needed to create, monitor, and modify the progress schedule on a continuous basis. Monitor and report on actual vs. target performance requirements.

2. Perform constructability analyses on a regular basis and coordinate general direction of work.

3. Evaluate and provide input to vendor construction plans.

4. Manage receipt of material and equipment and ensure proper storage and accessibility.

5. Monitor manpower and physical progress of construction.

6. Monitor as required cost items related to the construction contracts ie. reimbursable costs to control spending. Review contractor progress payment requests. Review and provide final invoice approval.

7. Review, evaluate, resolve and report on contractor claims and disputes including maintaining change logs.

8. Coordinate and administer the construction quality assurance program.

9. Monitor and report on engineering and procurement function to ensure that deliverables are processed in time to meet construction commitments.

10. Prepare construction reports and maintain daily construction log. Maintain record drawing data, and prepares all regular and any special documentation as determined by project needs.

11. Conduct construction coordination meetings as required to progress the project in accordance with the schedule.

12. Coordinate storage and lay-down needs.

13. Assist in the obtainment of all necessary permits and licenses.

Job Requirements:

• Experience in coordinating and managing complex construction in an industrial setting - Direct steel industry construction experiences a plus.

• Knowledge and proficiency of Construction Industry Institute (CII) and Project Management Institute (PMI) concepts a plus.

• Knowledge of industry standards pertaining to industrial construction and safety planning.

• Experience with multi-discipline constructability and construction planning.

• Ability to use of Microsoft Excel, Word, PowerPoint, and Oracle software.

• Ability to read and evaluate schedules. • Ability to evaluate estimates and related scope documents. • Knowledge of engineering, procurement and construction and other project-related activities, their interfaces and interdependencies. This includes a broad knowledge of industry design standards, safety planning, basic construction techniques, equipment specifications, project control techniques including critical path scheduling, resource loading, cost control including earned value, and construction turnover to commissioning process.

• Ability to multitask in a multi-faceted work environment with different types of responsibilities

• Ability to develop outage plans and coordinate with the operating facility to integrate outage construction work with other co-located activities.

• Familiarity with a variety of contract types (lump sum, cost reimbursable, guarantee max, T&M). • Need to be able to understand scope, drawings, and specifications for QA and change control.

• Full-time, on-site; Monday-Friday. supporting 1st Shift -- 7:30am to 4:30pm

• 
  
• Supervise QC inspectors and technicians, including scheduling, coaching, and performance evaluations.
  
• Develop and deliver training programs on inspection techniques, measurement tools, ISO 9001 requirements, and laboratory safety protocols.
  
• Ensure all QC staff are trained in proper handling of equipment, chemical safety, and emergency procedures.
  
• Mentor team members to enhance technical skills and promote safe work practices.
  
• Oversee inspection and testing of raw materials, in-process components, and finished products.
  
• Review and approve inspection reports, test results, and non-conformance documentation.
  
• Identify opportunities to improve laboratory workflows, reduce testing time, and enhance accuracy.
  
• Implement new inspection methods, tools, and technologies to optimize QC processes.
  
• Collaborate with engineering and production teams to integrate quality improvements into manufacturing processes.
  
• Enforce compliance with all safety regulations and company policies in the QC lab.
  
• Conduct regular safety audits and risk assessments.
  
• Support internal audits and assist with external certification audits.
  
• Implement corrective and preventive actions (CAPAs) for identified issues.
  

• 
  
• Bachelor's degree in Engineering, Chemistry, oQuality Management, or related field.
  
• 5+ years in a QC role within a manufacturing environment; at least 3 years in a supervisory capacity.
  
• Proficiency in inspection tools, measurement techniques, and quality software.
  
• Excellent leadership, communication, and problem-solving skills.
  

• 
  
• React to out-of-control conditions specified in the LECO Quality Management Plan
  
• Initiate action to prevent the occurrence of product non-conformity
  
• Initiate, recommend, or provide solutions through designated channels
  
• Identify and record any product quality problems
  
• Verify the implementation of solutions
  
• Control further processing, delivery, or installation of non-conforming product until the deficiency or unsatisfactory condition has been corrected
  
• Inspect parts that they manufacture and perform the related data entry
  

• 
  
• People in the Machinist 2-1 job classification must be able to read engineering drawings, routers, and precision measuring tools
  
• Own or be willing to purchase all necessary tools of the trade
  
• People in this job classification may be required to perform manufacturing processes involving any or all the following:
  
• Material handling Material sawing
  
• Solder assembly
  
• Part deburring and cleaning
  
• Bench assembly
  
• Tube forming
  
• Hand Screw Machine setup and operation
  
• Drill Press setup and operation
  
• Engine Lathe setup and operation
  
• Vertical Mill setup and operation
  
• CNC Machine Tool setup and operation
  
• CNC programming and editing
  
• Machine maintenance
  
• Miscellaneous shop duties
  

• High School Diploma or equivalent. 3+ years of experience is preferred