Engineering Journal Jobs in None, PA

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Biomedical Equipment Engineering Manager

Philadelphia, PA (Onsite)

Salary: $145,000 + Full Benefits

Full-Time | Leadership Role

We are seeking a Biomedical Equipment Engineering Manager to lead the maintenance, troubleshooting, and operational reliability of medical equipment across a hospital environment in Philadelphia, PA. This is an onsite leadership role responsible for overseeing biomedical engineering operations, ensuring critical medical devices remain safe, compliant, and fully operational to support patient care.

This position will supervise biomedical equipment technicians and engineers while collaborating closely with clinical staff, hospital leadership, and vendors to maintain high standards for equipment performance, safety, and regulatory compliance.

The ideal candidate will bring a strong background in hospital-based biomedical equipment maintenance, medical device troubleshooting, and team leadership within a clinical environment.

Key Responsibilities

• Lead and manage a team of Biomedical Equipment Technicians (BMETs) and Biomedical Engineers responsible for hospital equipment maintenance and support

• Oversee preventive maintenance, repair, and calibration programs for a wide range of medical devices and clinical equipment

• Troubleshoot complex issues involving diagnostic, therapeutic, and patient monitoring equipment

• Ensure all equipment maintenance activities meet hospital regulatory requirements and accreditation standards including Joint Commission and FDA guidelines

• Develop and manage equipment lifecycle planning, including replacement strategy and capital equipment upgrades

• Coordinate with clinical departments to ensure equipment availability and minimize disruption to patient care

• Manage relationships with OEM vendors and third-party service providers for specialized repairs and service contracts

• Implement reliability improvements and maintenance best practices to increase equipment uptime and operational efficiency

• Maintain accurate records and documentation within CMMS / biomedical asset management systems

• Support new medical equipment installations, system integrations, and facility expansion initiatives

• Ensure compliance with hospital safety standards and biomedical engineering best practices

Required Qualifications

• Bachelor’s degree in Biomedical Engineering, Electrical Engineering, or related field

• 5+ years of biomedical equipment experience within a hospital or healthcare system

• 2+ years of leadership or supervisory experience managing biomedical technicians or engineers

• Strong expertise in medical device troubleshooting, maintenance, and preventive service programs

• Experience supporting equipment such as patient monitors, imaging systems, infusion pumps, anesthesia machines, ventilators, and diagnostic equipment

• Knowledge of Joint Commission standards, FDA regulations, and healthcare compliance requirements

• Experience using CMMS or biomedical equipment management systems

Preferred Experience

• Experience managing biomedical operations across multiple departments or hospital campuses

• Familiarity with network-connected medical devices and clinical technology systems

• Certification such as CBET (Certified Biomedical Equipment Technician) or related biomedical certification

Compensation & Benefits

• $135,000 base salary

• Comprehensive health, dental, and vision benefits

• 401(k) with company match

• Paid time off and holidays

• Opportunity to lead biomedical engineering operations in a mission-driven healthcare environment

The Efficiency Network, Inc. (TEN) is an independent energy-focused design/build contractor that provides building infrastructure upgrades and energy projects services to state, local, and federal government, K-12 education, higher education, healthcare, and large commercial and industrial customers. We help our clients address deferred maintenance, invest in infrastructure, improve the efficiency and sustainability of their buildings, and make their operations more resilient.

TEN applies state of the art technology, engineering, construction and project management concepts and practices, along with creative financing and ownership solutions, to deliver projects quickly and efficiently.

TEN is part of the Duquesne Light Holdings, Inc. family of companies.

Location : Pittsburgh HQ Hybrd 3 -days a week,

Summary:

Reporting to TEN’s Vice President, Engineering, the Director-Design Engineering is responsible for overseeing the development and supporting the delivery of multi-disciplined construction projects. This role ensures that all design outputs meet technical, regulatory, and quality standards while aligning with project objectives and client requirements. The Director – Design Engineering will collaborate closely with internal development, engineering, and construction teams while directing and managing external design professionals (architects and engineers) to translate conceptual designs into executable plan documents and constructable project strategies. The Director – Design Engineering plays a key role in ensuring that projects are designed in a safe and profitable manner and all associated project risks are identified and mitigated.

Location: The successful candidate is situated in the Pittsburgh, PA region and will work from the company’s office and a home-based office with travel to customer sites as necessary.

Responsibilities:

Design Phase Leadership & Commercial Strategy

• Lead and manage internal and external multidisciplinary design teams (architects, engineers, and consultants) through all phases of design within a Design/Build delivery model, from concept development through design completion.
• Define and control design scope, standards, schedules, and deliverables to ensure alignment with project objectives, contractual obligations, and client expectations.
• Lead and participate in commercial negotiations with owners, design consultants, and key trade partners related to design scope, fees, risk allocation, and change management.
• Facilitate design coordination and decision-making with clients, internal stakeholders, and external partners to resolve technical and commercial issues efficiently.
• Oversee development of coordinated, complete, and constructible design solutions that enable accurate pricing, competitive proposals, and predictable construction outcomes.
• Ensure designs comply with applicable codes, regulatory requirements, and owner standards while balancing cost, schedule, quality, and risk considerations.
• Direct preparation and review of design submittals, equipment selections, and technical packages, ensuring commercial alignment and securing required client approvals.
• Validate evolving cost estimates, contingencies, and allowances throughout design development, identifying risks, opportunities, and value engineering options to protect and enhance project margins.
• Proactively identify, assess, and mitigate design-related commercial risks, including constructability, scope gaps, escalation exposure, and design schedule impacts.
• Confirm designs are fully coordinated and commercially executable prior to construction handoff, minimizing downstream changes, claims, and margin erosion.

Construction Phase Design Oversight & Commercial Support

• Serve as the primary design authority during construction, providing technical leadership and commercial support to project managers, superintendents, and field teams.
• Support interpretation of drawings, specifications, and design intent while assessing cost, schedule, and contractual implications of design decisions.
• Review and respond to requests for information (RFIs), submittals, and design clarifications with a focus on minimizing commercial exposure and avoiding schedule disruption.
• Evaluate proposed field changes, substitutions, and value engineering initiatives for technical feasibility, constructability, cost impact, risk allocation, and contract compliance.
• Lead coordination with architects, engineers, design-assist partners, and subcontractors to negotiate and resolve design-related issues encountered during construction.
• Ensure all approved design changes are accurately incorporated into revised documents and as-built records, maintaining alignment with contract requirements.
• Monitor construction activities for adherence to approved design documents.
• Support commissioning, testing, and closeout activities to ensure systems perform as designed and contractual obligations are met.
• Maintain alignment between design intent, construction execution, and financial performance, actively supporting margin protection, change management, and dispute avoidance.

Education and Experience Required:

Required:

• Bachelor’s degree in Engineering, Architecture, or a related field.
• 10+ years of experience in detailed design, estimating, and commercial support within the building construction industry.
• Proven leadership managing multidisciplinary design teams in Design/Build environments.
• Demonstrated success in commercial negotiations with owners, consultants, and trade partners.
• Advanced proficiency in CAD/BIM platforms and design standards.
• Strong working knowledge of building codes, regulatory requirements, and industry best practices.
• Excellent communication, negotiation, problem-solving, and organizational skills with the ability to balance technical and commercial priorities.

Preferred:

• Leadership on large-scale, complex, multi-disciplinary Design/Build projects.
• Direct involvement in contract negotiations, design fee agreements, and change management.
• Strong track record of providing commercial and risk-management support to project delivery teams throughout the project lifecycle.

EQUAL OPPORTUNITY EMPLOYER

Duquesne Light Holdings is committed to providing equal employment opportunity to all people in all aspects of the employment relationship, without discrimination because of race, age, sex, color, religion, national origin, disability, sexual orientation and gender identity or status as a Vietnam era or special disabled veteran or any other unlawful basis, as defined by applicable law, and fostering a workplace free of unlawful discrimination and retaliation. This policy affects decisions including, but not limited to, hiring, compensation, benefits, terms and conditions of employment, opportunities for promotion, transfer, layoffs, return from a layoff, training and development, and other privileges of employment. An integral part of Duquesne Light Holdings' commitment is to comply with all applicable federal, state and local laws concerning equal employment and affirmative action.

Duquesne Light Holdings is committed to offering an inclusive and accessible experience for all job seekers, including individuals with disabilities. Our goal is to foster an inclusive and accessible workplace where everyone has the opportunity to be successful.

If you need a reasonable accommodation to search for a job opening, apply for a position, or participate in the interview process, connect with us at and describe the specific accommodation requested for a disability-related limitation.

Project Coordinator – Capital & Marine Infrastructure

Philadelphia, PA | PhilaPort

Build infrastructure that actually matters.

PhilaPort is seeking a Project Coordinator to support the planning and delivery of complex capital construction projects that keep the region’s maritime economy moving. This role sits at the intersection of engineering, construction management, and public-sector infrastructure, offering hands-on exposure to marine, environmental, and heavy civil projects that are rare in the private market.

If you’re a civil, environmental, or construction engineer looking to grow into large-scale infrastructure work — or deepen your experience in marine construction — this is a unique opportunity to work on projects with long-term regional impact.

What You’ll Do

As a Project Engineer, you’ll support multiple phases of construction projects, from early planning through close-out, working closely with internal teams, consultants, and contractors.

Key responsibilities include:

• Support project managers in developing and maintaining project schedules, budgets, and work plans for active construction projects
• Coordinate day-to-day project activities, tracking progress, resolving issues, and helping keep projects on schedule
• Review construction documents, drawings, and specifications to ensure accurate execution in the field
• Assist with contract administration, including RFIs, submittals, change orders, and scope documentation
• Participate in construction site visits to monitor progress, quality, and safety compliance
• Support cost tracking, estimating, and budget control throughout the project lifecycle
• Maintain project documentation using construction management and engineering software
• Collaborate across engineering, environmental, and operations teams to support permitting, compliance, and stakeholder coordination

What We’re Looking For- You must have your PE License or be ready to sit for the exam.

We’re intentionally casting a wide but qualified net and are open to candidates who bring strong fundamentals and a willingness to learn the marine side of the work.

Required / Core Qualifications

• Experience supporting construction or infrastructure projects in a project engineering or construction management role
• Strong understanding of construction sequencing, drawings, and field coordination
• Ability to manage multiple priorities and collaborate across technical and non-technical teams
• Comfort working in active construction environments and participating in site visits

Preferred (Not All Are Required)

• Background or interest in marine, environmental, or heavy civil construction
• Familiarity with regional permitting or public-sector infrastructure projects
• Bachelor’s degree in Civil Engineering, Environmental Engineering, Construction Management, or a related field
• REQUIRED- PE license, EIT certification, or intent to sit for the PE exam within 6 months
• Experience with tools such as Procore, Bluebeam, Primavera P6, Civil 3D, or similar platforms (training can be provided)

Why This Role at PhilaPort

• Work on high-visibility, mission-critical infrastructure projects
• Gain exposure to marine and port engineering without needing prior specialization
• Stable public-sector environment with long-term capital planning
• Collaborative, team-based project delivery
• Opportunity to build a career in infrastructure that supports regional commerce and environmental stewardship

A Note to Candidates

If you meet most — but not all — of the qualifications, we still encourage you to apply. We value strong engineering fundamentals, curiosity, and a willingness to learn as much as prior marine experience.

Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.

Responsibilities:

• Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
• Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
• Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
• Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
• Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
• Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
• Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
• Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
• Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
• Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
• Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.

Qualifications:

• Bachelor’s Degree in technical degree is a plus, higher education desired.
• Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
• Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
• Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
• Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
• Proficient in Microsoft Suite, CMMS and ERP based systems.
• Aspiration to advance to senior management level

Compensation and Benefit:

• Lucrative compensation
• Yearend bonus
• 401k with match
• PTO
• Paid Holidays
• Health, dental and vision
• Life Insurance
• Disability Insurance
• Tuition Reimbursement
• Relocation Assistance

ARM Group LLC is looking for a self-driven and energetic Staff Engineer who is looking to grow and embodies an ownership mentality. The Staff Engineer will collaborate with a team of multi-disciplined engineers and scientists, project managers, CAD designers, and other staff to service our client’s needs. This role will support a wide range of projects related to our Energy & Power practice area in the areas of erosion and sediment control design, stormwater management design, and land development engineering.

The successful candidate will assist in performing engineering calculations, writing reports, and creating/updating design drawings using CAD and assist with client and regulator communications. This role may also support our solid waste management, environmental services, geotechnical engineering, oil and gas, water resources, and construction administration practice areas.

Location: This position can be filled in our Hershey, PA office.

Requirements

• Prepare, review, and update design drawings and investigation reports for commercial/industrial and utility scale solar projects throughout the Mid-Atlantic region.
• Observe and monitor field work to analyze possible problems.
• Perform and/or check technical calculations related to erosion and sediment control design, stormwater management design, and related land development engineering.
• Research code, zoning, ordinances, and other requirements as needed to ensure project compliance.
• Prepare reports, letters, emails, permit applications, etc. for projects.
• Collaborate with other team members to meet deliverables on project and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.

Base Requirements:

• Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.
• Experience with Autodesk Civil 3D or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Desire to work on multiple projects in parallel rather than a single large project for months.
• Proficiency in Microsoft Office Suite.
• Requires travel to job sites and occasionally out of the local area overnight stay.
• Valid drivers license

Preferred Requirements:

• E.I.T. certification preferred, but the opportunity to obtain certification can be developed.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Long term

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Performs advanced technical/engineering problem solving in support of power plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary duties and accountabilities include:

• Oversee feasibility studies and design activities for new build/commercial projects
• Applies experience to ensure feasibility studies provide accurate assessments of projects and outcomes for business cases
• Coordinate with nuclear & power engineering counterparts to ensure project scope is clearly delineated and understood
• Ensure technical deliverables are reviewed in a timely manner and challenged thoroughly for technical adequacy
• Possess knowledge of design standards/procedures and regulatory guidance applicable to support potential projects that interface with power plant
• Interface with site engineering managers as needed to obtain the information needed to successfully complete assigned projects
• Ensure that engineering activities are conducted in accordance with design standards, company procedures, and regulatory requirements
• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems
• Provide complete task management of engineering issues
• Perform engineering tasks as assigned by supervision applying engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications
• Perform independent research, reviews, studies and analyses in support of technical projects and programs
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations
• Has completed assigned skills and knowledge development training to broaden and deepen knowledge in select areas. Assist/mentor junior engineers on technical issues
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (Department duty coverage and/or call out, and positions outside of department in support of outage activities etc.)

Minimum qualifications include:

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, or mechanical) with 5 years technical experience or related engineering experience
• Maintain minimum access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred qualifications include:

• Proficiency in leading cross functional initiatives at an asset/plant
• Experience overseeing feasibility studies and design activities for new build/commercial projects. Strongly prefer nuclear plant working experience
• Experience working with NRC regulations and standards
• Possess knowledge of design standards/procedures and regulatory guidance applicable to support potential projects that interface with power plants

This position is open from junior to senior levels for candidates with expertise in machinery mechanical design. Don’t hesitate to apply!

Join Us at a Pivotal Moment of Growth

[Doosan Robotics X ONExia] is experiencing an exciting transformation. As a leader in robotic solutions with standard products for palletizing and packaging applications using Robot Arms, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems—from advanced palletizing and case packing to carton erecting and conveyor solutions—are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth.

The Opportunity

As one of our Mechanical Engineers, you'll be the creative force behind breakthrough automation solutions. You'll take customer concepts and transform them into sophisticated automated machines that solve real-world industrial challenges. This role combines engineering expertise with inventive problem-solving, offering the perfect opportunity for engineers who love bringing innovative ideas to life.

What Your Days Will Look Like:

• Design Work: Spend most of your time doing what you love—creating innovative machine designs using SolidWorks
• Hands-On Work: Get your hands dirty building prototypes, testing concepts, and working directly with the machines you design
• Project Management: Guide projects from concept through completion, ensuring your designs meet customer goals and timelines
• Collaboration: Present your designs to customers and teammates, sharing ideas and refining solutions together

Job Requirements

• B.S. in Mechanical Engineering with 3+ years of hands-on machine design experience
• Understanding of industrial components inside and out—bearings, motors, sensors, gearboxes, and how they work together
• Knowledge of materials, coatings, and machining processes for fabricated parts
• Ability to develop comprehensive machine layouts and specify the right components for each application
• Strong capability to create fabrication and assembly drawings.
• Solidworks experience
• Experience with robots
• Strong attention to detail
• Good communication skills to present design to customers and co-workers
• Strong capability to create fabrication and assembly drawings.

Ready to Be Part of Something Growing?

We're building something special at "Doosan Robotics X ONExia", and we'd love for you to help us do it. If you're ready to combine technical expertise with meaningful customer relationships while growing your career alongside our expanding company, let's talk.

Additional Details:

• Location: Exton, Pennsylvania (750 Springdale Dr, Exton, PA 19341)
• Schedule: Monday-Friday, 8-hour shifts
• Travel: 5-10% (occasional customer sites)
• Benefits

- 401(k)

- 401(k) matching

- insurance (Health, Life, Vision, Dental)

- Flexible schedule

- Paid time off

[Doosan Robotics X ONExia] welcomes applications from all qualified candidates and is committed to creating an inclusive workplace where everyone can contribute their best work.

[Doosan Robotics X ONExia] is an equal opportunity employer committed to creating an inclusive workplace where diverse perspectives drive innovation.