Engineering Journal Jobs in None, IN

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.

The Role We Want You For

Clayco is seeking an experienced and driven Project Executive to join our Life Sciences Business Unit. The Life Sciences market is rapidly growing and evolving, driven by advancements in biotechnology, pharmaceuticals, and healthcare. As demand for cutting-edge research facilities, laboratories, manufacturing plants, and clinical spaces continues to increase, Clayco is committed to delivering high-performance, state-of-the-art buildings that foster innovation and scientific discovery.

In this role, you will be instrumental in driving business success within the Life Sciences Business Unit, overseeing multiple high-profile projects from acquisition through execution. Acting as the “executive in charge,” your primary objectives will be to secure new business, maintain strong client relationships, and ensure projects are delivered on time, within budget, and to the highest safety standards. Success in this role will be measured by your ability to win business, foster client satisfaction, and deliver exceptional project outcomes.

You are a natural leader with experience managing large and complex design-build projects. You bring an entrepreneurial mindset to your work, thriving in a Seller/Doer role with a nationwide reach. You will work with an exceptional team of experts to deliver facilities that meet the stringent regulatory requirements and cutting-edge technological needs of the life sciences industry. This is an exciting opportunity to shape the future of the Life Sciences market, where your leadership and expertise will have a lasting impact on the industry. Your passion for business growth, combined with a strong background in leading construction teams, makes you an ideal fit to help continue to grow Clayco’s presence in the Life Sciences sector.

The Specifics of the Role

• Life Sciences Business Plan. Proactively engage in networking, industry events, and targeted marketing to build new client relationships.
• Project Acquisition: Lead the RFQ/RFP response process, including developing pursuit strategies, managing design and preconstruction efforts, overseeing communication and marketing, and presenting to clients. Ensure strategic alignment in deal negotiations, scope definition, and contract administration.
• Client Management: Serve as the primary executive contact for clients, ensuring satisfaction throughout the project lifecycle and fostering long-term relationships that lead to repeat business.
• Project Leadership: Identify and recruit top talent for project teams and ensure proper scope education and smooth transitions from design to construction. Provide executive oversight during construction to ensure adherence to schedules, budgets, and quality standards.
• Team Development: Mentor and inspire teams of construction professionals, fostering leadership growth and creating a high-performing, knowledgeable workforce.
• Operational Oversight: Collaborate with operations teams on critical activities, including major trade buyouts and early design-phase tasks. Ensure proactive management of construction costs, risk mitigation, and field execution.
• Life Sciences Business Unit by identifying opportunities for innovation, cost savings, and project delivery improvements.

Requirements

• Education: Bachelor’s Degree in Business, Civil Engineering, Construction Management, or a related field.
• Experience: 15+ years of progressive experience in construction, with a strong track record managing individual projects valued at $50M or more.
• Technical Expertise: Deep understanding of construction costs and cost drivers, both at the project and unit level. Proficient in contract negotiation and administration.
• Leadership Skills: Proven ability to lead large, cross-functional teams, with a focus on mentoring and developing talent. Strong ability to navigate complex challenges, resolve conflicts, and motivate teams to achieve exceptional results.
• Business Acumen: Entrepreneurial drive with a passion for business development, coupled with a keen understanding of customer decision-making processes.
• Communication: Strong verbal and written communication skills, with the ability to deliver impactful presentations and build consensus across internal and external teams.
• Problem-Solving: Ability to break down complex problems into manageable components, identify core issues, and develop innovative solutions. Skilled in prioritizing critical details and managing multiple projects concurrently.
• Attention to Detail: A meticulous approach to scope management and cost control, ensuring accuracy in all aspects of project execution.
• Strategic Thinking: Demonstrated ability to anticipate future trends, adapt to changing circumstances, and continuously seek ways to improve project outcomes and client satisfaction.
• Physical Requirements: Ability to physically navigate job sites, including climbing ladders and multi-floor scaffolding. Able to lift up to 50 lbs.

Some Things You Should Know

• Our clients and projects are nationwide – Travel will be required.
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!
• This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.

Why Clayco?

• 2024 Best Places to Work – Crain’s Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2024 ENR Midwest – Midwest Contractor (#1).
• 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

This position is required to be fully in-person at our headquarters in Carmel, Indiana.

Overview

We are seeking a highly motivated and versatile Senior SEO Specialist & Copywriter to join our marketing team. This position is focused on driving brand visibility, digital reach, and engagement through strategic, high-impact content.

You will own the company’s SEO strategy to acquire qualified leads for both BAM Capital and BAM Management. In addition to SEO content, you will produce formal financial communications and conversion-driven marketing copy to strengthen BAM Capital’s digital presence and support investor acquisition and retention.

We are seeking a performance-oriented communicator to elevate The BAM Companies’ digital voice. The ideal candidate blends exceptional writing and editing skills with years of hands-on SEO expertise, independently managing our content lifecycle across corporate and property websites while adapting our message for diverse audiences.

Key Responsibilities

Search Engine Optimization (SEO) Strategy & Execution

• Sole SEO Management: Act as the company's dedicated SEO content expert, driving organic growth (traffic and leads) across BAM Capital for accredited investors and property websites for residents.
• Keyword Research: Independently identify and analyze high-value, relevant keywords using industry-standard tools.
• Content Strategy: Develop and maintain a comprehensive content calendar based on keyword opportunity, search intent, and business goals.
• Article Production: Write, edit, and optimize detailed SEO articles that rank highly, drive organic traffic, and convert readers.
• Performance Reporting: Track, analyze, and report on key SEO metrics (e.g., traffic, keyword rankings, conversion rate) to demonstrate ROI and inform future strategy.
• Generative Engine Optimization: Stay up to date with and implement best practices to rank in AI search results.

Corporate & Financial Communications

• Professional Offering Memorandums (OMs) & Asset Supplementals: Draft and meticulously edit complex, professional financial and corporate documents, ensuring accuracy, clarity, and compliance to regulatory standards (as applicable).
• Quarterly Performance Reports: Develop clear, concise, and compelling reports for external audiences that summarize company performance and strategic outlook.
• Award Nominations: Research, write, and submit persuasive applications for industry award nominations.
• Executive Communications: Draft high-impact social media posts and professional communications for the CEO and other executives, including market insights and thought leadership pieces.

Marketing & Sales Content

• Website Copy & Brochures: Write and optimize engaging, clear copy for the corporate and property websites and marketing brochures. Keep websites up to date with frequent content reviews.
• Product Content: Create concise, informative product one-pagers and sales enablement materials for BAM Capital.
• Marketing Emails: Develop compelling email marketing copy for various campaigns (e.g., nurture, announcement, informative).
• Advertisements: Work with the internal PPC Specialist and Lead Generation Manager to develop high-converting copy for multi-channel advertising campaigns. Craft compelling headlines and calls-to-action that resonate with accredited investors, drive traffic to landing pages, and continuously A/B testing ad copy.
• Additional Content: Produce blog posts, guides, and articles that position The BAM Companies and BAM Capital as thought leaders

Required Qualifications

• Bachelor's degree in Marketing, Communications, Journalism, English, or a related field.
• Minimum of 5 years of professional content writing experience, with a portfolio demonstrating a wide range of content types.
• Demonstrated experience writing complex corporate or financial documents (e.g., quarterly reports, white papers, offering materials).
• Minimum of 3 years of proven, hands-on expertise in SEO content strategy, including proficiency with major SEO tools (e.g., Semrush, Ahrefs, Moz, Google Search Console).
• Exceptional written and verbal communication skills, with a mastery of AP and MLA grammar, style, and professional tone.
• A meticulous editor and proofreader with attention to detail skills.
• Ability to manage multiple projects simultaneously, meet tight deadlines, and work independently with minimal supervision.
• This role requires learning our industry in depth to successfully produce the required content.

Preferred Qualifications

• Experience in a regulated industry (e.g., finance, real estate, healthcare).
• Experience writing for a high-net-worth, business, financial, or luxury audience.
• Familiarity with content management systems (CMS) like WordPress.

At Tata Technologies we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Test Cell Support to strengthen our team in Columbus, IN.

Job Title- Test Cell Support

Location- Columbus, IN.

DESCRIPTION

The Engine Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine and aftertreatment control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong hands-on test cell experience and proactive troubleshooting of engine, aftertreatment, and test system issues throughout development and validation programs.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Lead calibration and tuning of diesel engine parameters including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management.
• Support aftertreatment calibration (DOC, DPF, SCR) with primary ownership on engine-out emissions.
• Plan and execute engine-centric test cell activities for calibration, tuning, and validation.
• Support Controls Engineer and Test Cell Technician to instrument engines and combustion measurement systems (pressure transducers, air/fuel flow, emissions).
• Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues.
• Diagnose control logic, calibration, and engine hardware issues observed during test cell operation.
• Use test cell data and Simulink model behavior to perform structured root cause analysis.
• Implement and validate corrective actions in control models and calibration datasets.
• Execute steady-state, transient, combustion, and regulatory test cycles.
• Strong understanding of Engine Controls in Simulink Models.

Experience:

• Strong expertise in diesel engine calibration and combustion fundamentals.
• Strong experience executing and supporting engine test cell activities, including steady-state, transient, combustion, and emissions testing.
• Hands-on engine test cell experience.
• Hands-on experience developing control system models in Simulink (must-have).
• Strong proficiency in MATLAB for engine and test data analysis (must-have).
• Proven troubleshooting capability across engine, controls, and calibration.
• Experience with calibration tools (ETAS INCA, ATI Vision, Vector CANape).
• Familiarity with engine test systems and DAQ

Qualifications & Education:

1. Master’s degree (preferred) in Internal Combustion Engines, Automotive Engineering, Controls Engineering, or Powertrain Systems.
2. 5–8 years of relevant experience in diesel engine calibration, tuning, and validation within engine test cell environments.

If you are passionate about bringing innovation to the projects, you work on then we would love to hear from you. We offer a complete benefits package, including; medical, dental, vision, life insurance and 401K.

Tata Technologies Inc. is an Equal Opportunity/ Affirmative Action employer. We provide equal employment opportunities to all qualified employees and applicants for employment without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, veteran status, disability, or any other legally protected status. We prohibit discrimination in decisions concerning recruitment, hiring, compensation, benefits, training, termination, promotions, or any other condition of employment or career development.

Tata Technologies: Engineering a better world.

Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

A Design Engineer job is currently available at Belcan in Indianapolis, IN. This job is a full-time position with benefits. In this job, you will support multiple gas turbine engine design projects adhering to cost, quality, and schedule. With support, you will be responsible for driving design from request to completion. Must communicate effectively with team members and management, utilizing verbal skills as well as written documents including creation and review of plans, reports and presentations.

Job Duties:

• Perform activities that include knowledge and support of the following: mechanical analysis, design, and calculations, engineering documentation composition, component durability assessment, and gas turbine engine manufacturing / build and test.
• Implement product definition criteria in accordance with requirements for commercial attributes associated with producibility/manufacturability of the component.
• Manages and maintains projects in priority status as assigned by program management.
• Maintains, reports, and communicates project status and progress to both internal program management team and customer.
• Monitors and reports progress against project schedule by monitoring activities and resolving problems to ensure that customer Project Milestones are met.
• Organize and maintain existing engineering records.
• Perform other such duties as required.

Required:

• DUE TO THE NATURE OF THE WORK PERFORMED, US CITIZENSHIP IS REQUIRED.
• Bachelor's degree in Aerospace or Mechanical Engineering.
• 1-2 years of aerospace engineering experience
• Must be able to communicate well and effectively work with a team of engineers to successful project outcomes.
• Must be able to write technical reports and correspondence including customer reports.
• Ability to read part prints and interpret GD&T tolerances.
• Ability to effectively present information in one-on-one, small group, and large group situations to customers, clients, and other employees of the organization.

Preferred Qualifications:

• Experience with Teamcenter.
• Gas Turbine Engine experience

We provide a competitive pay and benefits package. This position is offering a salary rate of $90,000 to $100,000 however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.'

"Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws."

Company Overview:

Process Alliance is a leading engineering consultancy firm dedicated to delivering innovative solutions in engineering, automation, manufacturing services, and medical devices. With a commitment to being a better model of problem solving, we have been at the forefront of providing cutting-edge engineering services to clients across the life science industry. Our team of experts thrives on solving complex challenges and driving technological advancements to meet the evolving needs of our clients.

Overview:

We’re hiring an Associate Process Control / Automation Engineer to join a pharmaceutical manufacturing team. This full-time role is ideal for early-career engineers with 2+ years of experience in process automation, hands-on DeltaV Batch DCS work, and exposure to regulated manufacturing environments.

Key Responsibilities:

• Act as automation engineer for assigned unit operations, including DeltaV Batch DCS configuration and control module development
• Translate process engineering narratives into functional requirements and control logic
• Develop graphics in reference with process P&IDs and maintain communication with other process cell owners for alignment
• Interface with customer Process Engineering team and outsourced vendors
• Establish requirements for configuration, testing, and release in alignment with project schedule
• Review and provide oversight of vendor-provided software development
• Support Computer System Validation (CSV) documentation for assigned process cells
• Execute software application testing, including FAT/SAT activities

Qualifications:

• Bachelor’s degree in Chemical, Electrical, or Controls Engineering
• 2+ years of hands-on experience in process automation or process control in pharmaceutical or regulated manufacturing
• Experience with DeltaV Batch DCS required; familiarity with other DCS/PLC platforms (Honeywell, Rockwell PlantPAx) is a plus
• Knowledge of ISA-88 batch standards, GMP, and CSV principles
• Strong collaboration, communication, and documentation skills

About Our Culture:

At Process Alliance, we strive to be a better model for how problems are solved, and solutions are delivered. We believe in providing a supportive and inclusive work environment where employees can thrive both personally and professionally. Join our team and be part of a company that is shaping the future of engineering solutions.

Learn more about us:

Visit our website at to explore our projects, expertise, and the impact we make in the engineering and consultancy space.

Process Alliance is an equal opportunity employer. We encourage applications from candidates of all backgrounds and experiences

Production Engineer

WHO?

The Production Engineer is a key technical role within INCOG BioPharma Engineering and Technical Operations to ensure data integrity, implement state-of-the-art digital technologies, process control strategies, and support the technology road map.

The ideal candidate must have experience in pharmaceuticals and/or biologics, GMP manufacturing, and/or within highly regulated industries as well as knowledge and experience in aseptic filling, sterile manufacturing, and engineering principles.

This is a 2nd shift position.

WHAT?

• Resolve issues that arise per daily operation and provide timely responses and solutions
• Implement solutions in collaboration with cross-functional technical teams and site leadership
• SME for filling equipment and supporting systems
• Evaluate and improve efficiency of manufacturing instruments, equipment, and tools
• Evaluate and implement new changes
• Participate and/or support process FMEAs to understand process and product risks as a pre-requisite for process validation.
• Provide technical support to manufacturing activities
• Apply Good Engineering Practices (GEP) to drive site engineering and operational excellence.
• Partner with vendors and suppliers to define requirements and understand functional specifications
• Work flexible hours to ensure production facility coverage

YOU!

• Bachelor’s degree in engineering field or life sciences with 5+ years of relevant work experience
• Demonstrated knowledge of pharmaceutical manufacturing of biotechnology products, aseptic processing (fill and finish), and process development
• Hands-on experience troubleshooting, repairing and performing preventative maintenance of manufacturing equipment

Additional Preferences:

• Lean Six Sigma Certification
• Practical expertise with cGMP manufacturing and regulatory requirements for pharmaceuticals and devices
• Applicable experience with process design, data integrity, controls, instrumentation, and electro-mechanical systems

Why INCOG?

• Paid time off, based on tenure
• 11 paid holidays
• 401(k) plan with company match up, vested immediately
• Choice of health & wellness plans
• FSA and HSA options
• Onsite wellness facility
• Employee engagement activities; food trucks, monthly luncheons, fundraising events, team building competitions, offsite celebrations

Don’t meet all the requirements? Don’t sweat! We’re always looking for an excuse to discuss your next opportunity. You might just surprise yourself…

Lead Candidate wholeheartedly supports Equality and Diversity in employment and opposes all forms of unlawful or unfair discrimination on the grounds of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief and marriage and civil partnerships.

About SHEIN

SHEIN is a global online fashion and lifestyle retailer, offering SHEIN branded apparel and products from a global network of vendors, all at affordable prices. Headquartered in Singapore, SHEIN remains committed to making the beauty of fashion accessible to all, promoting its industry-leading, on-demand production methodology, for a smarter, future-ready industry. Founded in 2012, SHEIN has more than 16,000 employees operating from offices around the world and continues to expand operations globally. Join SHEIN and be the future!

Position Summary

We are seeking a highly skilled Project Manager to lead the implementation of automation systems in our warehouse operations. This role involves independently managing complex, cross-functional projects from concept through completion, collaborating with internal teams and external vendors to ensure successful delivery. The ideal candidate will have strong technical knowledge of automation systems, experience in engineering solutions, and a proven ability to lead projects with tight deadlines.

Job Responsibilities

• Manage the full lifecycle of challenging warehouse automation projects, ensuring alignment with business objectives.
• Lead and contribute to engineering reviews, providing input on systems architecture, facility processes, and automation components.
• Partner with internal stakeholders and external vendors to prioritize projects, set milestones, and maintain schedules.
• Proactively identify and resolve project risks, dependencies, and bottlenecks.
• Oversee the execution of systems and automated equipment designs, ensuring compliance with safety and performance standards.
• Lead installation, throughput, and safety qualifications for automated equipment.
• Facilitate effective meetings, driving technical and business discussions to ensure alignment and progress.
• Provide regular project status updates, risk analyses, and mitigation plans to leadership.
• Manage change orders, purchase orders, and invoicing for automation projects.
• Build strong relationships with internal and external teams to enhance project execution.
• Identify and implement process improvements that drive efficiency across engineering and cross-functional teams.

Job Requirements

• Bachelor’s degree in industrial engineering, Mechanical Engineering, or other STEM-related field.
• 8+ years of experience in project management, process engineering, or implementing automation systems.
• Proficiency in CAD software (AutoCAD, REVIT, BIM 360).
• Strong experience in managing cross-functional projects involving automation, material handling, or integrated systems.
• Excellent problem-solving skills with the ability to lead technical teams and drive high-impact solutions.
• Familiarity with Six Sigma and Lean Manufacturing principles.
• Experience with automation solutions such as conveyors, sorters, high-speed manufacturing lines, and robotic cells.
• Proficiency with project management tools (Microsoft Project, Smartsheet).

Benefits and Culture

• Healthcare (medical, dental, vision, prescription drugs)
• Health Savings Account with Employer Funding
• Flexible Spending Accounts (Healthcare and Dependent care)
• Company-Paid Basic Life/AD&D insurance
• Company-Paid Short-Term and Long-Term Disability
• Voluntary Benefit Offerings (Voluntary Life/AD&D, Hospital Indemnity, Critical Illness, and Accident)
• Employee Assistance Program
• Business Travel Accident Insurance
• 401(k) Savings Plan with discretionary company match and access to a financial advisor
• Vacation, paid holidays, floating holidays, and sick days
• Employee discounts

SHEIN is an equal opportunity employer committed to a diverse workplace environment.

DePuy Synthes Companies of Johnson & Johnson is recruiting for a Supply Chain Engineer-Orthopedics to be located in Warsaw, Indiana.

Johnson & Johnson announced plans to separate our Orthopedics business to establish a standalone orthopedics' company, operating as DePuy Synthes. The process of the planned separation is anticipated to be completed within 18 to 24 months, subject to legal requirements, including consultation with works councils and other employee representative bodies, as may be required, regulatory approvals and other customary conditions and approvals.

Should you accept this position, it is anticipated that, following conclusion of the transaction, you would be an employee of DePuy Synthes and your employment would be governed by DePuy Synthes employment processes, programs, policies, and benefit plans. In that case, details of any planned changes would be provided to you by DePuy Synthes at an appropriate time and subject to any necessary consultation processes

About Orthopaedics

Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments.

Are you passionate about improving and expanding the possibilities of Orthopaedics? Ready to join a team that’s reimagining how we heal? Our Orthopaedics teams help keep more than 6 million people moving each year while delivering clinical and economic value to surgeons and healthcare systems. Our teams build solutions for joint reconstruction; trauma and craniomaxillofacial; sports, extremities, and elective foot and ankle; spine; and robotics and digital surgery.

Your unique talents will help patients on their journey to wellness. Learn more at Supply Chain Associate Engineer College Hire position offers recent university graduates the opportunity to accelerate their career growth through work rotations within the Supply Chain organization over a 3-year period. The goal of the rotational assignments is to develop the next generation of leaders for the engineering, operations, and quality disciplines within the Johnson & Johnson Family of Companies. Functional areas within the program include Operations, Production Planning, Engineering and Quality. The combination of cross-functional work assignments and action learning helps to develop the skills and capabilities needed to build your career path toward leadership development.

Position Components:

• Combining on the job experience with business, leadership & personal development training
• Rotational assignments that deliver real business results
• Opportunity to expand technical capabilities, leadership skills and business knowledge
• Exposure to a broad range of experiences in Operations, Production Planning, Engineering and Quality
• Building technical skills in many of the following areas:
• New Product and Process Development
• Project Management
• Supply Chain Management (Planning, Manufacturing & Procurement)
• Quality & Regulatory Compliance
• Product and Process Analysis & Improvement Methodologies (Six Sigma, Lean, Design Excellence)
• Collaboration and Teamwork

Position Responsibilities:

Employees are responsible for demonstrating a working knowledge of how Operations, Production Planning, Engineering and Quality interact across the supply chain. Associates will gain valuable experiences in:

• Participating in the planning, production and distribution of products and services
• Maintaining or improving manufacturing operational cost, efficiency, capacity, and compliance
• Learning about designing or redesigning new products
• Understanding the impact of the business on the customer experience
• Maintaining quality and regulatory compliance

Associates may also have the opportunity to interface with internal customers and external vendors to make capital improvement to manufacturing systems and equipment.

Associates will have the responsibility to supervise in-house and contracted personnel on production lines and/or in the daily business. Participants may be responsible for or will assist in the selection, purchase, installation, and validation of new equipment or system.

Associates may participate in preparing documents such as Standard Operating Procedures (SOPs), equipment effectiveness studies, and validation protocols.

Associates may also participate in activities that include auditing, planning, forecasting, designing and executing cost improvement projects and developing design standards.

Qualifications:

Education: A Bachelor's Degree or Master's Degree in a Supply Chain or Engineering related field is required

• An interest in exploring multifunctional assignments within Engineering, Operations/Supply Chain, and Quality is required
• 1 year cumulative, relevant work experience preferred
• Co-operational experiences & Internships will count toward cumulative work experience if assignments are in relevant business areas including Supply Chain, Operations, Engineering or Quality. Prior co-op experience working in Medical Devices & Diagnostics and/or Pharmaceutical industry is preferred.
• AutoCAD, Tooling Design, and Statistics experience from either academia or industry is preferred.
• A minimum cumulative G.P.A. of 3.0 (based on 4.0 scale) is preferred.

Demonstrated leadership and/or participation in campus/community service activities are preferred.

Eligible candidates should be within one-year of graduation date

Permanent US work authorization required - without sponsorship

BE VITAL in your career, Be seen for the talent you bring to your work. Explore opportunities within the Johnson & Johnson Family of Companies.

Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act.

Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants’ needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via , internal employees contact AskGS to be directed to your accommodation resource.