Engineering Journal Jobs in Millbrae California

Job Title: Senior Payroll Specialist (NAMER)

Duration: 8+ Months.

Location: Remote

• Senior Payroll Specialist will independently execute semi-monthly, high-volume North American payroll (US / Canada / Mexico) in a fast-paced environment, ensuring payroll is accurate, audit-ready, and approved on time.
• This role owns payroll readiness end-to-end in tandem with our Payroll Specialist - preparing inputs, validating results, and proactively resolving issues before approval - with the Payroll Manager reviewing final outputs.
• In addition, this role will prepare monthly journal entries and accruals and partner with the Accounting team to support reconciliations and other analyses as needed.

Responsibilities:

• Execute semi-monthly, high-volume NAMER payroll (U.S., Canada, and Mexico) in a fast-paced environment, delivering accurate and on-time payroll results.
• Own payroll readiness by preparing payroll templates/loads and validating upstream inputs (e.g., Workday changes, benefits/tax updates, and one-time payments).
• Perform pre-approval audits and exception/variance checks; ensure issues are identified, resolved, and documented before approval.
• Proactively troubleshoot payroll errors, drive root-cause resolution, and reduce repeat issues through improved checks and documentation.
• Manage out-of-cycle payments as needed (manual checks/electronic transfers) with appropriate approvals and an audit trail.
• Manage employee payroll inquiries and intake via ServiceNow, meeting SLAs and escalating appropriately.
• Partner with ADP and Cloudpay on case resolution, compliance reporting, and tax/benefits coordination.
• Prepare monthly payroll journal entries and payroll accruals with supporting schedules; support GL upload processes (Oracle, SAP, or equivalent).
• Support Accounting close by providing tie-outs, audit support, and responses for reconciliations and flux/variance explanations.

Basic Qualifications:

• Bachelor’s degree (or equivalent practical experience) and 8+ years of progressive payroll experience, including end-to-end responsibility for high-volume, semi-monthly multi-state U.S. payroll; experience supporting Canada and Mexico payroll a plus (NAMER scope)
• Strong knowledge of payroll impacts from benefits administration and taxation for federal, state, and local entities, including compliance requirements and reporting
• Demonstrated ability to operate independently in a fast-paced environment, proactively identifying and resolving payroll issues before approval and consistently meeting deadlines
• Strong interpersonal and stakeholder management skills, with the ability to communicate clearly, manage escalations appropriately, and partner cross-functionally
• Advanced proficiency in Microsoft Excel and related business tools (e.g., large data validation, pivots/lookups, audit checks, and reconciliations)
• Experience with relevant systems including ADP Workforce Now and a ticketing system such as ServiceNow; Workday experience is a strong plus
• Experience preparing payroll journal entries and payroll accruals, including supporting schedules and working with Accounting on close timelines

Your responsibilities include:

Provide technical expertise of Sephora Web and Cloud native Supply Chain/WMS and Merchandising systems and associated peripheral integrations, environments and Databases.

Provide the leadership for the Supply Chain Production Engineering team to determine root cause of complex incidents and engineer solutions to provide continuous improvement of Supply Chain Systems reliability.

Develop annual support plans, based upon team learnings and Business/Leadership feedback, to ensure a cost-effective organizational structure that addresses production issues within agreed upon SLAs to resolve software issues.

Ensure all systems are continuously patched & covered under a proper certification, ensures timely resolution of production issues.

Establish metrics from Service Now incidents, generate ageing Reports and review with IT & Biz Leadership, resolve issues within stated SLAs, and improve system stability and reliability.

Provide Technical Co-Ordination, oversight and technical coaching to teams to ensure impactful incidents are analyzed for root cause and effective mitigations are in place.

Take lead in resolving P2/P3 issues of cross functional in Nature, pull teams together and focus in resolving the production issues that are impactful and escalated.

Work with Production Support & Engineering teams and develop enhancements to fix recurring issues in production.

Manage Escalations for Production Issues, bring teams together and work to resolve the issues and own end2end issue resolution & stakeholder communication for escalations.

Provide oversight to ensure adequate staffing coverage both during periods of non-peak and peak season.

Ensure Production Engineering team members employ standard and generally accepted Development practices (ensure code reviews and technical coaching), and consistent methods of troubleshooting, triage, and incident resolution to restore service most quickly and effectively.

Demonstrate our Sephora values of Passion for Client Service, Innovation, Expertise, Balance, Respect for All, Teamwork, and Initiative

We’re excited about you if you have:

10+ years of retail and systems Support experience for Logistics, Merchandising, Inventory and Planning Systems in a fast-paced environment.

5+ years of technical expertise in managing full stack web Cloud native applications using various technologies including Angular, REACT, NodeJS, Oracle Database experience is a must.

Demonstrated ability to co-ordinate multiple remote teams and drive resolution.

Demonstrated ability to effectively communicate with Business and all levels of IT and Business management.

Strong Negotiation skills, presentation skills and conflict resolution skills needed.

Prior experience managing or leading Engineering Teams preferred.

Strong knowledge of Supply Chain, WMS & Merchandising Business process flows and integration of those with other systems preferred.

Demonstrated ability to debate ideas, comfortable managing constructive conflict, and not afraid to challenge the status quo.

Open-minded with proven ability to work collaboratively with others in team environment.

Experience with JDA WMS/Blue Yonder systems, o9, Riversand/Syndigo, TMS and Oracle Database is desired.

Bachelor’s degree in engineering, Computer Science or a related field and / or equivalent experience

Job Title: Android Software Engineer

Location: CA- Burlingame / Hybrid ( 3 days in office )

Contract: 6+ Months, potential extension

Pay Rate: $84.26/hr, W2

Benefits: Medical, Dental, Vision and Weekly Pay

Job Summary:

As a Tech Giant, We’re building a practical neural interface drawing on the rich neuromotor signals that can be measured non-invasively with single motor neuron resolution. This technology has become one of the main pillars for interaction with the virtual and augmented world.

We are looking for developers with experience in user interfaces, infrastructure, and/or tools supporting applications across various interfaces, including desktop and Android. If you are interested in joining a world-class team of passionate people and industry veterans, we look forward to hearing from you soon!

In this role the candidate is expected to interact and align with researchers and product partners on concept creation, ensure proper integration with backend and create reusable and well-tested code

Job Responsibilities:

• Present designs, prototypes and concepts to cross functional partners and stakeholders
• Work collaboratively with Research, Engineering and other partners to execute and complete experiences
• Work on a variety of coding languages and technologies
• Implement custom user interfaces using latest programming techniques and technologies
• Develop reusable software components for interfacing with back-end platforms

Skills:

• Experience building maintainable and testable code bases, including API design and unit testing techniques
• Exposure to architectural patterns of large scale software applications
• Experience with scripting languages such as Python, Javascript or Hack
• Experience building Android applications in Java or Kotlin using Android SDK
• Experience as an owner of a particular component, feature or system

Preferred:

• Experience building complex applications for the iPhone or iPad using Objective-C/C++/Swift with the iOS SDK and other frameworks
• Experience with multithreaded programming and mobile memory management

Must Have:

• UI development across platforms (desktop + Android), including custom UI implementation with modern techniques.
• Strong software engineering fundamentals: building maintainable/testable codebases, API design, and unit testing.
• Mobile engineering (Android): Java/Kotlin + Android SDK, and ability to integrate UI with back-end platforms.
• Python knowledge

Nice to Have:

• iOS development (Objective-C/C++/Swift, iOS SDK/frameworks).
• Multithreaded programming + mobile memory management.
• Scripting language proficiency ( JavaScript / Hack) for tooling, infrastructure, or automation.

Education:

• Required: A Bachelor's degree in Computer Science or Computer Engineering.

Pursuant to the California Fair Chance Act, Los Angeles County Fair Chance Ordinance for Employers, Los Angeles Fair Chance Initiative for Hiring Ordinance, and San Francisco Fair Chance Ordinance, qualified applicants will be considered for assignment with arrest and conviction records. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness, meet client expectations, standards, and accompanying requirements, and safeguard business operations and company reputation.

#TMN

San Francisco, CA

You love to tackle problems and build solutions. When intrigued by an idea, you focus your energy and dedicate your mind to learn everything you can about it, quickly! Then, you figure out how to apply what you've learned to the issue at hand and propel it forward. Facing big challenges head on inspires you. You chart the process and you own the outcome. You love helping people. You enjoy sharing knowledge and get energized by smart people navigating complicated problems together. Reaching milestones motivates you. You're an early riser. And, you're ready for your next adventure.

We are on a simple, yet daring mission: revolutionize the modern procurement software industry, and, dare we say make it delightful. Delightful procurement.

Founded in 2022, Levelpath is a mobile-first platform that's powered by AI. We believe in software that's thoughtfully engineered to solve problems and drive progress. The opportunity is huge, as the procurement market today is $11.5 billion and it's growing quickly. Our founding team has a track record of building successful companies, and we're backed by visionary Silicon Valley venture capital firms. We're focused on delivering delightful user experiences to all stakeholders. Our vision is to future-proof our customers' procurement function, and make enterprises of any size faster, safer, and more transparent.

We're looking for a Customer Support Specialist to join our team. Reporting into Product, you will not only get a front row seat to what it takes to scale a successful product from the early days, but you will play a critical role in developing strong relationships with our customers and users, and advocating on their behalf to continuously improve our platform.

We are building a world class support team obsessed with helping our customers, and focused on getting them back on the right path when challenges arise. This is a rewarding opportunity to drive meaningful impact and build from the ground up alongside a leadership team passionate about making a difference in the procurement world.

This position is located in downtown San Francisco, in-office, conveniently adjacent to public transit. While a startup, we offer most standard benefits you'd expect from a mature organization - even transportation and 401k! You'll be a part of a spirited international team, in an agile environment with short decision paths and quick delivery. You may leverage any devices and tools that allow you to do your best work.

• Drive impact by focusing on customer experience. Examples of day-to-day activities include answering support tickets, providing users guidance when they are stuck, generating product documentation, reporting bugs to product & engineering, and numerous other related jobs.
• Be the first touch point for users encountering difficulties with the product and a reliable resource to resolve their questions and issues
• Learn the intricacies of a cutting edge enterprise product and be a Levelpath product expert for our customer base to drive product adoption and satisfaction
• Interact directly with Product and Engineering teams to identify areas where we can better serve our customer base
• Build best practice guides and playbooks to ensure our customers and their users are set up for success
• Act as a trusted advisor & support customer health by understanding their users' friction points when using Levelpath
• You will have a seat at the table and partner with our executive team - helping to build, optimize, and scale our processes, assets, & systems (Zendesk & Salesforce)

• Empathy, patience, and a sense of urgency when supporting customers
• 4-6 years of experience in a customer-facing/customer-management role
• B2B SaaS experience in a fast-paced environment
• BA or BS
• Demonstrated experience problem-solving with attention to detail
• Stellar organizational skills and experience improving processes
• Strong written and verbal communication skills
• Adaptability and ability to flourish in a fast-paced environment
• Comfort in managing multiple workstreams
• Ability to communicate with stakeholders across product and engineering
• Effective collaboration and self-starter mindset
• Availability for some travel - when the time comes to visit your customers!

• 100% Medical, dental, and vision insurance
• Flexible PTO, Parental Leave, Sick Leave
• Competitive compensation and equity package
• 401k
• Commuter benefits
• In-office snacks and Friday team lunches
• Team-driven happy hours and celebrations

The estimated annual cash salary for this role is $62,000- $120,000. Levelpath is committed to equal treatment and opportunity in all aspects of recruitment, selection, and employment. We work hard to evaluate all employees and job applicants consistently, without regard to race, color, religion, gender, national origin, age, disability, pregnancy, gender expression or identity, sexual orientation, citizenship, or any other legally protected class. We're working to build a more inclusive economy where our customers have equal access to opportunity, and we strive to live by these same values in our workplace.

Head of Operations and Manufacturing Ripple Medical | California (Hybrid or Remote) | Full-Time

ABOUT RIPPLE MEDICAL

Ripple Medical is a health tech company on a mission to revolutionize hypertension management with our cuffless blood pressure wearable. Once cleared by FDA, our product will enable patients to easily and accurately monitor blood pressure at home, empowering them and their providers with actionable data to improve outcomes. We're a collaborative, mission-driven team of 33 working in a medical device regulatory environment to bring this technology to the millions of patients who can benefit.

POSITION SUMMARY

The Head of Operations and Manufacturing will own the end-to-end operational infrastructure required to bring Ripple's FDA-regulated cuffless blood pressure monitor to market and scale production. This is a hands-on leadership role for someone who thrives building from zero to one in a regulated environment: selecting contract manufacturers, standing up supply chains compliant with FDA 21 CFR Part 820, establishing ISO 13485-certified quality management systems, and preparing for direct-to-patient fulfillment.

As a company preparing for 510(k) submission and commercial launch, this role is critical to ensuring we can reliably manufacture and deliver a high-quality, FDA-cleared medical device at scale. The ideal candidate brings deep experience in medical device manufacturing (particularly wearable or electro-optical devices), understands regulated hardware supply chains and design transfer, and can roll up their sleeves while building the team and processes for long-term growth.

This position reports directly to the CEO with high visibility to the leadership team and Board of Directors.

KEY RESPONSIBILITIES

Manufacturing & Production

• Lead selection and onboarding of contract manufacturing partners with Class II medical device experience, including RFQ, quality audits, contract negotiation, and ongoing management.
• Own design transfer and manufacturing transfer, working with engineering on DFM principles, Device Master Record (DMR) requirements, and production readiness.
• Establish production planning, forecasting, and capacity management for V&V builds, pilot production, and volume manufacturing.
• Drive continuous improvement in yield, quality, and cost while maintaining FDA and ISO compliance.
• Oversee pilot runs and scale-up, including process validation (IQ/OQ/PQ) and manufacturing controls.

Supply Chain & Procurement

• Build and manage the end-to-end supply chain, including component sourcing, supplier qualification, and inventory management per FDA purchasing controls.
• Develop supplier relationships and negotiate terms while ensuring supply continuity, traceability, and risk mitigation.
• Implement inventory planning to balance working capital with service levels, including buffer strategies for Year 1 launch.
• Monitor and mitigate supply chain risks: component shortages, single-source dependencies, geopolitical factors, and logistics disruptions.

Quality & Regulatory Compliance

• Maintain and improve the ISO 13485-certified QMS in partnership with the quality and regulatory team, ensuring FDA 21 CFR Part 820 compliance.
• Support 510(k) submission activities related to manufacturing, including process validation documentation, DMR development, and device history records (DHR).
• Define incoming inspection, in-process controls, and final product testing consistent with the risk management file.
• Manage product certifications for a Class II device, including FDA registration, UDI compliance, and applicable international requirements.
• Lead root cause analysis and CAPA for quality issues, ensuring post-market surveillance compliance.

Fulfillment & Logistics

• Design the direct-to-patient fulfillment strategy, including 3PL selection with FDA-cleared Class II device experience.
• Establish logistics and distribution for nationwide shipping of a regulated device with chain-of-custody and traceability.
• Develop returns, replacement, and warranty processes that balance patient experience, cost, and compliance.

Team & Organizational Development

• Start as an individual contributor who executes hands-on, then build and lead the operations team through 510(k) clearance and commercial launch.
• Establish operational metrics and dashboards for manufacturing, supply chain, and quality performance.
• Partner with finance on cost modeling, COGS optimization, and operational budgeting.
• Collaborate cross-functionally with engineering, software, regulatory, and commercial teams.

QUALIFICATIONS

• 7-12 years in manufacturing, operations, or supply chain, with 3-5+ years in medical devices (Class II preferred), wearables, or regulated hardware.
• Experience managing contract manufacturers for regulated medical devices, preferably in Asia and/or domestically.
• Experience at or with CMs/EMS providers (Flex, Jabil, Celestica, Plexus, Sanmina) in Class II medical device or wearable programs is a strong plus.
• Track record of design transfer and scaling production from pilot to volume for regulated products.
• ISO 13485 and FDA 21 CFR Part 820 experience required.
• Familiarity with the 510(k) process and manufacturing documentation (process validations, DMR/DHR) strongly preferred.
• Bachelor's in Engineering, Supply Chain, Operations, Biomedical Engineering, or related field; MBA or advanced degree a plus.
• Based in California or travel up to 25%.

COMPENSATION

• Base Salary: $160,000 - $210,000 USD
• Performance Bonus: Tied to company milestones and personal objectives
• Equity: Early-stage stock option grant with meaningful ownership
• 100% Employer-Paid Healthcare: Medical, dental, and vision
• Additional Benefits: 401(k) with company match, flexible PTO

POSITION OVERVIEW

The Glazing Engineer is responsible for the completion of high quality façade, curtain wall and glazing system projects on time, within budget and within scope. This role will oversee all aspects of a project from start to finish by coordinating efforts involving the internal team, subcontractors, vendors, and owners/developers. The ideal candidate will have outstanding interpersonal skills, adjusting to changing priorities from various directives, and communicate effectively.

RESPONSIBILITIES

• Oversees the design development and coordination of custom curtain wall and glazing systems, translating architectural intent into engineered, buildable, and fully coordinated façade solutions. Capable of leading multiple projects and supervising engineers.
• Know and comply with all federal, state, local building codes, ordinances and regulations, maintaining the highest standards for safety and quality.
• Manage relationships with all internal and external parties in order to determine specifications of the project, resolve conflict, and support success.
• Establish project schedule and delegate project tasks based on staff strengths, skills, and experience.
• Secure and allocate all resources needed for the completion of the project including building permits, licenses, materials, equipment.
• Negotiate, manage and communicate changes to contract scope, schedule and costs.
• Plan and execute inspections, assess design compliance and quality, minimize risk.
• Create and maintain comprehensive project documentation.
• Regularly confer with supervisors to monitor and report on compliance, quality and productivity.
• Be a strong team leader, build synergy within and across the team, and develop individuals.

REQUIREMENTS

• Bachelor’s degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture or related field.
• Minimum of 3+ years of experience in façade, curtain wall, or glazing system engineering within a design-build or design-assist environment
• Strong understanding of building envelope design, structural behavior, waterproofing, and thermal performance
• Proficient in AutoCAD, Revit, and 3D modeling tools; familiarity with façade testing standards (ASTM, AAMA, NFRC)
• Experience coordinating with architects, structural engineers, and fabricators through design, procurement, and installation
• Skilled in technical documentation, submittal review, and field problem-solving
• Excellent communication and collaboration skills within multidisciplinary project teams
• A valid driver’s license.

This position description is a summary and not a complete representation of the position; the essential functions of the position may change as duties are assigned.

Information for Recruiters and Agencies/Staffing Firms: Build Group does not accept unsolicited agency resumes. Please do not forward unsolicited agency resumes to our website or to any Build Group employee. Build Group will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered the property of Build Group.

Notice to California Residents/Applicants: In connection with your application, we collect information that identifies, reasonably relates to, or describes you (“Personal Information”). The categories of Personal Information that we collect include your name, government-issued identification number(s), email address, mailing address, other contact information, employment history, educational history, and demographic information. We collect and use those categories of Personal Information about you for human resources and other business management purposes, including identifying and evaluating you as a candidate for potential or future employment or future contract positions, recordkeeping in relation to recruiting and hiring, conducting criminal background checks as permitted by law, conducting analytics, and ensuring compliance with applicable legal requirements and Company policies.

Equal Opportunity Employment: Build Group provides equal employment opportunity to all employees and applicants for employment, free from unlawful discrimination based on race, color, religion, gender, age, national origin, disability, veteran status, marital status, sexual orientation, gender identity, genetic information or any other status or condition protected by local, state or federal law. This policy applies to all terms and conditions of employment, including hiring, training, orientation, placement, discipline, promotion, transfer, position elimination, rehire, benefits, compensation, retirement and termination. As an equal opportunity employer, Build Group seeks to hire employees based solely on their qualifications and abilities.

A growing high-tech manufacturing company in the Palo Alto area is seeking a Customer Service / Sales Representative to support existing customers while helping generate new business opportunities.

This role sits at the intersection of customer service, inside sales, and technical order management, making it ideal for someone who enjoys working with customers, coordinating with engineering and operations teams, and driving revenue growth.

Key Responsibilities

• Act as the primary contact for assigned customer accounts, handling inquiries, order updates, and general support

• Prepare quotes, process sales orders, and manage customer requests from RFQ through delivery

• Track shipments, order status, and customer requirements through internal ERP/CRM systems

• Work cross-functionally with engineering, production, quality, and accounting teams to ensure customer expectations are met

• Follow up on outstanding quotations and identify opportunities to expand existing accounts

• Assist with customer portals, documentation, and order administration

• Support collections and coordinate pro forma invoices when required

Preferred Background

• Bachelor’s degree in Business, Engineering, or related discipline preferred

• 3+ years of experience in customer service, inside sales, sales support, or account coordination

• Experience supporting customers in technical, electronics, aerospace, or manufacturing environments is a plus

• Strong communication and relationship-building skills

• Familiarity with ERP or CRM platforms

• Highly organized with the ability to manage multiple orders and priorities simultaneously

SBT is the exclusive retained recruiting firm for this position.

Company Overview

This confidential startup is a well-funded early-stage semiconductor company focused on advancing AI-driven design to address emerging challenges in the artificial intelligence ecosystem. The company is developing innovative technologies that leverage automation and machine learning to accelerate the design and development of complex analog semiconductor solutions. By applying AI to traditionally manual and time-intensive design processes, the organization aims to unlock faster innovation cycles and enable the next generation of AI hardware infrastructure.

Job Role

• Design and implement digital control logic for power management ICs
• Work closely with analog engineering teams to ensure effective integration between digital control blocks and analog power circuitry
• Develop high-quality, power-efficient RTL using Verilog or SystemVerilog to support key features
• Contribute to product readiness for manufacturing by supporting design-for-test methodologies
• Create and execute comprehensive verification strategies, including mixed-signal simulations and behavioral modeling

Qualifications

• BS or MS degree in Electrical Engineering, Computer Engineering, or a related field.
• 10+ years of experience in digital IC design, including significant experience developing solutions for mixed-signal or power management semiconductor products.
• Strong proficiency in RTL development using Verilog or SystemVerilog for synthesizable digital design.
• Hands-on experience designing digital control logic for power conversion systems, including control loops used in power management or DC-DC converter applications.

Position: Manufacturing Engineer

Onsite - Redwood City, CA

Full time

Salary - $100k - $120k+Benefits

Job id #- 160181

Key Responsibilities:

• Participate as a core member of the MRB (Material Review Board) team to review and disposition nonconforming parts.
• Lead and document root cause analyses and develop RCCA (Root Cause and Corrective Action) reports in collaboration with customers and internal teams.
• Perform First Article Inspections (FAI) in accordance with customer and internal requirements.
• Conduct internal audits to verify compliance with company procedures and quality standards.
• Support and host external customer and supplier audits as needed.
• Drive continuous improvement initiatives focused on reducing cost, improving process effectiveness, and enhancing product quality.
• Collaborate cross-functionally with Production, Engineering, and Customer Service to ensure consistent quality performance.

Qualifications:

• Bachelor’s degree in Engineering, Quality, or related technical field (or equivalent experience).
• Minimum 3 years of experience in a manufacturing or metal finishing environment, preferably within semiconductor or aerospace industries.
• Strong understanding of quality tools and methodologies (RCA, 5 Whys, 8D, PDCA, etc.).
• Experience with inspection methods, dimensional measurement tools, and FAI documentation (AS9102 preferred).
• Excellent written and verbal communication skills; ability to work effectively across departments.
• Familiarity with ISO 9001 or similar quality management systems.
• Background in mechanical work or a degree in Mechanical Engineering or related field.
• Proficiency in reading and interpreting manufacturing blueprints and technical drawings.

About Us:

Founded in 2009, IntelliPro stands as a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. With a dynamic presence in the USA, China, Canada, Singapore, Philippines, UK, India, Netherlands, and Germany, we continue to lead the way in global talent solutions.

IntelliPro, a global leader in connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at : The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more.

Job Details:

Job Title: Manufacturing Technician

location: Foster City, CA 94404

Duration: 6+ Months

Pay rate range: $42.00 - $46.72/hour

Job Description:

• As an Additive Manufacturing Specialist at Client, you will serve as a technical anchor for the Additive Manufacturing (AM) Lab, driving the end-to-end realization of complex autonomous vehicle prototypes.
• Beyond standard operation, you will act as a Design-for-Manufacturability (DfM) consultant to engineering teams and internal clients, optimizing builds for high-performance materials and mission-critical throughput, unlocking new speed of prototype delivery.
• You are responsible for the strategic health of the lab, including process optimization, equipment evaluations, planning, and the technical guidance of prototyping workflows.

Responsibilities:

• Design Consultation & DfM: Actively support design reviews related to Additive Manufacturing (DfAM) with engineers to optimize geometries for SLA, SLS, and Polyjet; proactively identify failure risks in CAD models before they reach the build tray to minimize material waste.
• Process Engineering: Develop and document standardized build parameters and post-processing two essential workflows: Additive Manufacturing (primary) and Laser Cutting (secondary) to ensure repeatable, high-quality output across all AM and Laser Cutting platforms.
• Complex System Integration: Oversee the final assembly of high-fidelity prototypes, e.g. integrating 3D-printed components with CNC-machined parts and complex electronics.
• Post processing of prototype parts: Actively guide and execute post-processing work such as sanding, painting, inserts, dyeing and other part finishing related activities.
• Workflow Coordination: Facilitate the prioritization of incoming JIRA requests to ensure alignment with prototyping deadlines.
• Machine Maintenance, Repair and Troubleshooting: Quickly, safely and correctly troubleshoot, diagnose and lead repair activities (whether internally or externally) maximizing part throughput
• Technical Vendor Liaison: Act as a technical point of contact for vendor support, service coordination, and troubleshooting of Additive Manufacturing and Laser Cutting equipment.
• Knowledge Sharing: Serve as a Subject Matter Expert (SME) to share best practices on advanced AM techniques and safety protocols.

Qualifications:

• Education & Experience: Bachelor's Degree in Industrial Design or Engineering with 4 to 6 years of experience in high-stakes prototyping or advanced manufacturing environments, or equivalent.
• Technical Mastery: Deep expertise in the chemical and thermal properties of advanced resins and powders (SLA, SLS, FDM, and Polyjet); proven ability to make quick and sound technical recommendations on AM materials, processes and applications.
• Advanced CAD: High proficiency in Solidworks, CATIA, specifically for fixture design and modifying complex assemblies for printability.
• Advanced CAM: High proficiency in part processing software, aka "slicers", such as Materialize Magics, GrabCAD Print (Stratasys) and / or Autodesk Fusion (AM build extensions); and/or similar.
• Precision Metrology: Demonstrated ability to perform quality control using precision measurement tools to validate part accuracy against GD&T requirements.
• Strategic Problem Solving: A proven track record of improving lab efficiency, reducing build failure rates, or streamlining post-processing cycles.
• Cross-functional Collaboration: Demonstrated ability to drive outsized positive outcomes and impact through thoughtful, effective and regular cross-functional activities across other internal teams (CNC machining, Welding, etc.)

Bonus Qualifications:

• GD&T Proficiency: Ability to interpret and apply Geometric Dimensioning and Tolerancing to ensure functional fitment of prototype assemblies.
• Fabrication Versatility: Meaningful experience in other prototyping methodologies like: MIG/TIG welding and CNC operation experience.
• Safety & Compliance: Experience implementing OSHA-compliant shop safety programs or hazardous material management (HazMat).

Employee Benefits:

At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits:

• Four options of medical Insurance

• Dental and Vision Insurance

• 401k Contributions

• Critical Illness Insurance

• Voluntary Permanent Life Insurance

• Accident Insurance

• Other Employee Perks

EEO Employer:

LanceSoft is a certified Minority Business Enterprise (MBE) and an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. LanceSoft makes hiring decisions based solely on qualifications, merit, and business needs at the time.