Engineering Journal Jobs in Maryland

Are you passionate about solving real-world network engineering challenges?

Do you want to perform advanced research, development, and test & evaluation of ground breaking communications systems and technologies?

If so, we want you to join our innovative team of engineers solving some of the most complex and evolving networking challenges.

We’re looking for a versatile Networking Orchestration Engineer who thrives in a mission-driven environment and is excited to contribute to the development of operational prototypes and specialized network capabilities.

• Research and experiment with emerging networking technologies to implement real-world, practical communications systems and capabilities to address a variety of evolving operational needs.
• Design, build, and orchestrate large scale virtualized networking environments using both on-prem and cloud services in order to implement threat-representative network environments tailored for unique missions.
• Collaborate directly with sponsors and collaborators to understand their toughest networking challenges and craft effective solutions.

You meet the minimum qualifications for this position if you...

• Have a Bachelor’s degree in Computer Science, Computer Engineering, Network Engineering, Information Systems, or a closely related technical field.
• Have at least five years of relevant experience in advanced network engineering and software automation, including software-defined networking, cloud infrastructure, observability, and modern routing/virtualization technologies.
• The ability to obtain an Interim Top Secret level security clearance by your start date and can ultimately obtain a Top Secret level clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

• Have the ability to be a creative networking guide who flourishes with solving tough, undefined problems by applying unique and innovative approaches.
• Are able to design, build, and test practical, working solutions from the ground up using your deep knowledge and experience in:
  • Building software solutions that enhance network orchestration, automate complex workflows, and provide deep insight through traffic analysis
  • IP networking fundamentals (layers 2 and above)
  • Linux networking (IP stack, routing, iptables, network namespaces, etc.)
  • Hybrid Cloud infrastructure automation (Terraform, Packer)
  • Configuration management and automation(Ansible, Puppet, Chef, Salt)
  • Containers, and orchestration (Docker, Kubernetes)
  • GitOps workflows and CI/CD pipelines (GitLab CI, Jenkins)
  • Python or languages applied to network automation and tool development
  • Software Defined Network (SDN) and/or Software Defined WAN (SD-WAN) technologies
  • Network virtualization and overlay technologies (VXLAN, EVPN, MPLS, segment routing)
  • Routing and switching protocols (BGP, OSPF, IS-IS, STP, etc.)
  • Network telemetry and observability (NetFlow, SNMP, Prometheus, Grafana, ELK)
  • Design and Integration of Network APIs and interfaces (NETCONF, RESTCONF, gRPC)
  • Virtual networking and NFV concepts (vRouters, vSwitches, service chaining, CORE, GNS3)
  • Network Traffic generation and analytics
• Take initiative and thrive in a collaborative, problem-solving environment.
• Are passionate about national security, networking innovation, and making a real-world mission impact.

#LI-AG1

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.

Do you have a passion for additive manufacturing (AM)?

Do you have a Maker's attitude for modifying 3D printers to do outstanding things and the persistence and attention to detail to get AM parts through aerospace qualifications?

Do you love to push the bounds of science and technology while working to take on some of the most challenging problems facing our Nation?

If so, we're looking for someone like you to join our team at APL.

We are seeking a Metal Additive Manufacturing Engineer to help us develop new materials and methods and mature these innovative capabilities to produce qualified hardware. You will be a vital member of APL's Additive Manufacturing Center (AMC), within the Research and Exploratory Development Department. The AMC is tasked with leading the implementation of innovative AM materials and processes to meet the future needs of APL staff and our Government sponsors. The AMC also supports APL with specialized prototyping and low-volume production services. As a member of our team, you'll build hardware that explores other planets and interstellar space through various NASA missions as well as building critical prototype hardware for our nation's national security and national health interests. In addition, we provide manufacturing expertise as part of our trusted agent role for the US government.

• Provide engineering support for the operation of the metal AM printers at APL.

• Utilize your fundamental understanding of how the 3D printers work to develop new materials, optimize material properties for unique applications, and develop innovative processes that enable entirely new capabilities in AM.

• Complete build preparation tasks with proficiency in parametric CAD software (e.g., SolidWorks, CREO, etc.), and .stl file editing and build preparation software (e.g., Materialise Magics, EOS Print, QuantAM, etc.).

• Develop unique additive-enabled designs using sophisticated software for lattice generation and topology optimization.

• Utilize AM process simulation tools to identify part geometry at risk for distortion and/or build failure and implement improvements in build orientation and support structure design to minimize build risk.

• Implement Quality Control measures in research and functional prototyping environment.

• Detail AM procedures and implement traceability measures for projects requiring qualification.

• Serve as a domain expert within APL to raise awareness of additive manufacturing activities and vision at APL.

You meet our minimum qualifications for the job if you...

• Have a BS degree or higher in a related engineering or science field.

• 2+ years experience with Metal Additive Manufacturing engineering.

• Have experience running metal AM machines (selective laser melting or directed energy deposition) in an industrial setting.

• Have a high level of proficiency with at least two of the following software tools: parametric CAD (e.g., SolidWorks, CREO, NX), .stl editing software (e.g., Magics, Netfabb, Meshmixer), or build preparation software (e.g., EOSPrint, QuantAM).

• Experience carrying out design of experiments using statistical software such as JMP, DesignExpert, or minitab.

• Technical writing experience authoring and/or being a primary contributor to technical proposal and reports.

• Are able to obtain Secret level security clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenship.

You'll go above and beyond our minimum requirements if you...

• Have experience producing qualified hardware using metal AM, such as following the NASA standard for additive manufacturing spaceflight hardware.

• Have experience designing additive enabled parts using sophisticated lattice generation and topology optimization software tools such as nTopology, Ansys, and Dessault Systems.

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.

AGE Solutions is looking for a Junior Network Engineer - PPSM / Boundary Protection to join our team in support of a cybersecurity risk management and assessment program with our DoD customer. In this role, you will support the PPSM Program through the assurance that all Enterprise IS Ports, Protocols, and Services (PPS) are registered in the PPSM central registry (PPSM-Unclassified (PPSM-U) and PPSM-Classified (PPSM-C)); are categorized and updated on the PPSM Category Assurance List; non-standard requests are not deployed prior to approval from the Authorizing Official (AO); and assist the Government to develop, revise, implement, and enforce PPSM policies. PPSM support includes all DISA owned and supported ISs and DISA authorized Cloud Service Offerings.

Individuals in this role must be available to work on-site at Ft. Meade, MD full time.

Responsibilities Include:

• 
  
• Ensure all systems are registered in PPSM and eMASS, processing DD2875 requests within four days and auditing access annually.
  
• Develop and update the DISA PPS Registry SOP/Guide semi-annually.
  
• Process and track PPSM change, exception, and modification requests, ensuring compliance.
  
• Provide PPPS and DMZ Whitelist Status Reports for system authorization efforts.
  
• Generate weekly data reports from DISA DMZ Whitelist and PPS Registries (NIPR & SIPR), coordinating corrections.
  
• Support DoD PPSM CCB/TAG meetings, providing feedback and voting recommendations within three days.
  
• Maintain PPSM Registries, ensuring alignment with eMASS and tracking compliance metrics.
  
• Review and resolve PPSM registration discrepancies per DoDI 8551.01, assisting stakeholders.
  
• Monitor and support DISA PPSM TAG Representatives with CLSA, exception requests, and emergency changes.
  
• Submit NSU packages for inclusion in the Category Assurance List (CAL).
  
• Validate DISA ISs in the PPSM Registry, ensuring updates in PPSM-U and PPSM-C for environmental changes.
  
• Verify PPSM Registry and eMASS IDs for accuracy.
  
• Provide PPSM compliance metrics, including registrations and discrepancies.
  
• Establish PPSM training on DMZ Whitelist and PPSM request processes.
  
• Conduct customer meetings and support DISA initiatives to ensure security compliance.
  
• Maintain PPSM registrations for new CSOs, updating as needed.
  
• Manage DISA DMZ Whitelist Registries, ensuring accurate eMASS correlation.
  
• Validate DISA DoD DMZ Whitelist submissions within two business days, ensuring compliance.
  
• Process emergency DMZ Whitelist requests within two hours with leadership approval.
  
• Review DISA ISs in the DMZ Whitelist Registry, updating for decommissions/modifications.
  
• Provide DMZ Whitelist metrics on entries, types, and system associations.
  
• Conduct annual DMZ Whitelist reviews, ensuring accuracy and reporting concerns.
  

Requirements:

• 
  
• Education:
  
  • 
    
  • Bachelor's degree (IT-related field preferred)
    
  
  
  
• Experience:
  
  • 
    
  • Three (3) years of overall experience in a network engineering position
    
  
  
  
• Clearance:
  
  • 
    
  • Have an active DoD Top Secret clearance with SCI eligibility
    
  
  
  
• Certifications:
  
  • 
    
  • DoD 8570 IAT Level II certification
    
  
  
  
• Skills and Knowledge:
  
  • 
    
  • Understanding of the PPSM Registry management, eMASS, and DISA DMZ Whitelist processes
    
  • Understanding of 8551.01, DISA security policies, and compliance monitoring
    
  • Proficiency with network architectures, LAN/WAN, TCP/IP, routing, and switching
    
  • Proficiency with network security, ports/protocols, firewalls, and boundary protection
    
  • Understanding of 8551.01, DISA security policies, and compliance monitoring
    
  • Strong written and verbal communication for technical documentation and stakeholder engagement
    
  
  
  
• Location:
  
  • 
    
  • This role is fully onsite in Ft. Meade, MD.
    
  
  
  

Compensation: $65,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

• 
  
• Conduct inspections to ensure compliance and conformance with project or contract specifications
  
• Conduct inspections in accordance with Quality Control Plan
  
• Conduct inspections to ensure adherence to applicable legal requirements
  
• Confer with Quality Assurance, Manager as appropriate
  
• Read blueprints and specifications
  
• Monitor operations to ensure that they meet specifications
  
• Recommend adjustments to the assembly or installation process
  
• Inspect, identify, and submit material, components, or products for testing and measurement
  
• Operate electronic inspection equipment and software
  
• Document approval or rejection of inspected material, components, or products
  
• Identify for removal all components, products and materials that fail to meet specifications
  
• Report inspection and test data and quantities inspected
  
• Participate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.
  
• Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures
  
• Participate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.
  
• Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.
  
• Collect data, analyze for continuous improvement, and share with project team weekly.
  
• Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.
  
• Document daily QC reports
  
• Understand and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.
  
• Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.
  
• Immediately notify operators, or supervision of any non-conformances in products
  
• Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.
  
• Assist in the training of operators and provide guidance.
  
• Assist in the problem-solving process.
  
• Participate in the Daily ORM work briefings to represent the Quality Portion.
  
• Assist in root cause, corrective and preventive action development for systemic issues.
  
• Advise appropriate party of any corrective action to be taken.
  
• Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector.
  

• 
  
• Associates Degree in Technical Discipline (may be substituted for quality related experience)
  
• At least 4 years hands-on experience in the electrical industry
  
• To possess or have the ability to obtain a Journeyman License within 6 months of hire
  
• Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards
  
• Experience with receiving, production, shipping and quality processes
  
• Excellent communication skills (written, and verbal)
  
• Strong attention to details, highly organized and computer literate
  
• Ability to work well in a fast-paced manufacturing environment
  

• 
  
• A competitive salary
  
• Medical, dental, vision, life, and disability insurance
  
• Paid-time off
  
• Tuition reimbursement
  
• 401k Retirement Plan
  
• Military Reserve pay offset
  
• Paid maternity leave
  

• 
  
• Exposure to computer screens for an extended period of time
  
• Sitting for extended periods of time
  
• Reach by extending hands or arms in any direction
  
• Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard
  
• Listen to and understand information and ideas presented through spoken words and sentences
  
• Communicate information and ideas in speaking so others will understand
  
• Read and understand information and ideas presented in writing
  
• Apply general rules to specific problems to produce answers that make sense
  
• Identify and understand the speech of another person
  

• Responsible for day-to-day meeting of the 2nd shift shaft seal production goals while maintaining both Quality and Safety standards.
• Monitor daily production output and delivers corrective actions for shaft seal department.
• Independently analyzes product and equipment specifications and performance.
• Coordinate with Operations Manager for resource analysis and capacity planning.
• Plan and assign work according to changing priorities.
• Motivates and holds machine operators accountable to achieve daily production goals.
• Initiate continuous improvement activities to improve product flow.
• Train, mentor and supervise the machine operators for continued improvement of skills and development of human capital.
• Perform defect root cause analysis and mitigation.
• Perform departmental administrative duties as assigned.
• Engage in disciplinary actions as needed.
• Provides positive supervision and motivation daily, lending support when/where needed and assuring effective communication lines remain open between employees and management.

• Must be a US Person.
• Bachelor's degree in business or engineering is preferred with minimum 2 years' manufacturing experience; or associate's degree in business or engineering is preferred with minimum 3 years' experience; or at minimum HSD or GED with minimum 4 years' experience in manufacturing supervision.
• Ability to lift up to 35 pounds without assistance.
• 2nd shift runs M-F, 3P-11P; supervisor hours 2:30P-11:30P to communicate with outgoing and incoming supervisor.

• Minimum 4 years' of blueprint reading / GD&T
• Minimum 2 years' experience with ISO9001, AS9100, NADCAP or other QMS
• Minimum 2 years' experience managing people
• Minimum 2 years' experience working with in ERP system (Business Central preferred)
• Minimum 2 years' experience using Microsoft Office products
• Minimum 2 years' experience with CNC Machining (lathes and mills)
• Minimum 2 years' experience with manual machining (lathes and mills)

• Safe Harbor 401k Plan with Company match up to 3.5%
• Medical, dental, vision and voluntary benefits on the 1st of the month following hire date
• PTO
• Bonus eligible
• Company paid life insurance, short-term disability and long-term disability
• Temperature controlled work environment -- yes, even on the production floor!

Compensation details: 65000-75000

PI8f05bb28d864-26289-39735058

• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget.
• Follow written work instructions.
• Work under minimal supervision on duties and tasks that are frequently non-routine, adapting procedures, techniques, tools, materials and/or equipment to meet special needs.
• May perform more detailed task that require deeper knowledge and experience in the specified processes and procedures.
• Rely on experience and judgment to plan and accomplish assigned goals.
• Able to effectively communicate with other functional departments, such as Engineering, Purchasing, Manufacturing, Engineering, Quality, and Sales departments
• Resolve most questions and problems, referring only the most complex issues to higher levels
• Serve as a resource to others in the resolution of complex problems and issues
• Be a self-starter and demonstrate good decision making ability
• Must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS)
• Proper use of required PPE
• May periodically assist in orienting and training lower level employees
• May participate in LEAN Events, \"Six S\" activities, action teams etc.
• Support, communicate, reinforce and defend the mission, values and culture of the organization
• Perform advanced-level assembly functions, which may include: prep, mechanical, harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production
• May perform soldering and installation of components to contract specifications, using a wide range of tools and equipment
• Interpret blueprints, Process Flow Instructions and other written or verbal instructions
• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices
• Must be trained across all assembly stages, work w/Engineering to build 1st articles by interpreting print/specification with no process provided and the ability to interpret/assemble all units in dept
• If required, perform all aspects of inspection: in-process, final and source; allocate partial points - 3 points in-process - 3 points final - 4 points source
  

• High school diploma or GED with a minimum of 2 years of experience in soldering
• This position is for the second shift. Must be available to work: 1:30pm - 11:30pm (which includes a 1-hour, non-paid, meal break)
  

We are seeking a CQV Project Manager to support the Pilot Bioproduction Facility (PBF) at the Walter Reed Army Institute of Research (WRAIR) in Silver Spring, Maryland. This multidisciplinary CQV (Commissioning, Qualification, and Validation role will leverage Good Engineering Practices (GEP) and GMP manufacturing background to plan, coordinate and report project scope associated with PBF capabilities expansion and revenue generating technology transfer projects. This dynamic new position manages teams, budgets, schedules, and risks, overseeing the entire lifecycle from planning to execution, focusing on developing protocols, testing, documentation, and regulatory compliance for equipment and processes.

PBF is a one-of-a-kind cGMP-compliant pharmaceutical manufacturing facility engaging in next-generation development for cutting-edge companies and government agencies. The professionals at PBF are engaging in trailblazing endeavors every day. Most exciting, the end products vary, so every year brings multiple opportunities for professional enrichment in original projects.

CAMRIS International, LLC, is a dynamic medical research and development firm that achieves innovative solutions to health and development challenges through high-quality, cost-effective programs and research management services. We combine our proven systems with today’s most effective, evidence-based best practices. Our core practice areas include vaccine research, development, and production; microbiology and infectious disease research; biodefense; clinical research; global health security; and HIV/AIDS programs.

Our employees enjoy a collegial environment where individual contributions matter at all levels. At CAMRIS, you will notably improve the lives of people at home and abroad.

Responsibilities

• Solution project challenges with multi-disciplinary teams tracking and reporting metrics.
• Manage project actuals vs. forecast and update status with program leadership.
• Facilitate project team meetings, including scheduling, planning, and tracking.
• Experience scheduling and executing GMP equipment design, testing and qualification.
• Project planning and project lifecycle management from conception to completion.
• Track qualification and operational readiness of equipment and systems, as necessary.
• Leverage dependency matrices, diagrams, and gap assessments to define project scope.
• Communicate and coordinate with PBF stakeholders to define scope and budget.
• Grow and maintain relationships with WRAIR staff, customers, and vendors.
• Organize and participate in customer and potential customer visits.
• Manage project submittals, change control processes and project management artifacts.
• Actively communicate customer project and facility constraints.
• Evaluate schedule constraints, risk, and feasibility of performing CDMO projects.
• Assist managers with subcontractor schedule development and maintenance.
• Support shutdown planning and execution and update capacity utilization metrics.
• Optimize and scale the Project Management function as capacity grows.
• Perform other duties as assigned.

Qualifications

Required

• BS/BA in business, engineering, life sciences, or a related field.
• 5+ years of biologics development or manufacturing industry experience.
• MS Project proficiency, including resource planning.
• MS Excel, MS Word, MS SharePoint, and MS Teams familiarity.
• Familiarity with implementing operational excellence.
• Excellent written and verbal communication skills.
• Must be currently eligible to work in the United States without visa sponsorship and have lived in the United States for three of the past five years if a non-US citizen.

Preferred

• PMP and/or earned value training.
• Knowledge of GMP, EU, FDA, ISPE guidance as it applies to multi-modal pharmaceutical manufacturing.
• Biologics experience in development, manufacturing, or engineering.
• Experience with cost analysis and finance.
• CDMO project management experience.
• Capital project management experience.
• SmartSheet experience.
• Leadership experience.

Physical Requirements, Workplace Hazards and Conditions, and PPE and Chemical Requirements

The physical requirements, workplace hazards and conditions, and PPE and chemical requirements described here are representative of those that a candidate must meet to perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential job functions.

Physical Demands

• Constantly conduct sedentary work that primarily involves sitting/standing.
• Occasionally conduct light work that includes moving objects up to 20 pounds.
• Occasionally push or pull less than 25 pounds.
• Occasionally reach above shoulder level.
• Constantly use both hands.
• Occasionally stand or walk for more than 25 minutes.
• Occasionally kneel, squat, or stoop.
• Constantly have clear vision (near and/or far), depth perception, peripheral vision, and/or visual acuity.

Physical Activities

• Occasionally move about to accomplish tasks or move from one worksite to another.
• Constantly communicate with others to exchange information.
• Constantly assess the accuracy, neatness, and thoroughness of the work assigned.

Environmental Conditions

• Constantly work in environments where no adverse environmental conditions are expected.

PPE and Chemical Requirements

• Rarely wear PPE including but not limited to gloves, face shields/goggles, safety glasses, and safety shoes.
• Rarely wear a lab coat.
• Rarely wear a clean room uniform.
• Rarely wear a disposable dust/surgical mask.

Please submit your resume online at CAMRIS is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability status, or any other characteristic protected by any applicable federal, state, or local law.

CAMRIS offers a comprehensive benefits package, including medical, dental, and vision insurance for individuals and families, FSAs, HSA, life and AD&D insurance, short- and long-term disability, legal services, voluntary hospital indemnity, critical illness and accident insurances, EAP, pet insurance, 401(k) with employer match and Roth option, tuition and professional reimbursement, public transportation support in the DMV area, a referral bonus program, vacation with tenure-based increases, PTO, 11 paid holidays, paid bonding leave, and paid supplemental short-term disability.

Employment is contingent upon successful completion of a Public Trust-level background check, a requirement for this position under an active federal contract. The background check process may include, but is not limited to the following: (1) contacting your professional references; (2) verification of previous employment, education and credentials; (3) a criminal background check; (4) use/abuse of federally-controlled substances; and (5) a department of motor vehicle check. Candidates must be prepared to fully-complete any required background check questionnaire during initial onboarding.

Do you have a passion for leading technical and operational engagement within collaborative DCSA Approved Areas and mission-focused events involving key APL contributors and sponsors?

If so, we want you on our team in the Cyber Security and Technical Collaborative Centers (JAF) group within the National Security Analysis Department (NSAD).

We are seeking a motivated Technical Facilities Integrator who will provide professional level leadership in the technical and operational integration of NSAD’s specialized facilities, while coordinating system readiness and mission support activities across JHUAPL campus locations. In JAF, we are committed to developing innovative technical solutions that empower our staff, fostering an environment of creativity, autonomy, and independent thinking.

As a Technical Facilities Integrator, you will…

• Lead the concept design and implementation of the mission-support technical architectures, ensuring alignment with NSAD operational policy frameworks and DCSA compliance requirements - Examples include generative AI exercises, wargaming, modeling and simulation events, technical briefings, and sponsor engagements across classified and unclassified environments.
• Serve as a technical advisor, collaborating with Program, Project, and Operations Managers to define technical requirements, resource strategies and system integration roadmaps.
• Organize cross-functional operational teams, ensuring coordinated development of technical procedures, configuration baselines, and lifecycle management practices to strengthen mission technical capabilities.
• Provide on-site and live-event technical oversight, exercising independent judgment to diagnose and resolve complex issues in real time to ensure continuity during mission-critical activities.
• Lead the configuration, administration, and performance management of technical systems, including classified computing environments, video teleconferencing platforms, and audio/visual projection and switching systems.
• Partner on the architectural design, integration strategy, and long-term technology roadmap for the continuous improvement of telecommunications, network, and A/V systems across departmental technical facilities, ensuring secure, reliable, and mission-aligned operation of platforms such as XLeap/MeetingSphere, Zoom, Teams, AI agents, etc..
• Independently satisfy the design, deployment, and reconfiguration of technical systems and facility layouts to support evolving operational requirements, providing oversight of implementation activities to ensure technical and security alignment.
• Provide oversight and performance strategy for the optimization of display, visualization, and collaborative systems to enable high quality technical presentations and mission activities.
• Define enterprise validation protocols, acceptance criteria, and performance benchmarks for mission-critical visualization and collaborative systems.
• Lead pre-event resource collaboration, requirement composition, and system validation including hardware and software configuration, testing, and performance assurance, to guarantee readiness and reliability during live operations.
• Develop and manage the model for lifecycle planning, configuration standards for electronic support tools, network components, and A/V hardware, ensuring systems are documented, maintained, and aligned with operational and security requirements.
• Collaborate with Facility Managers, Project Managers, and Senior Program Managers to evaluate, pilot, and enhance emerging collaborative and visualization technologies that advance mission execution and sponsor engagement capabilities.

You meet our minimum qualifications for the job if you have...

• A Bachelor’s degree in Engineering, Information Technology, Cybersecurity, Technical Facilities/Operations, Computer Science, or equivalent relevant experience.
• At least three years of relevant experience supporting the design, integration, configuration, or deployment of computing, network, audio/visual, or telecommunications systems, ideally within a classified environment, and working knowledge of NISPOM regulations.
• Knowledge of telecommunications and collaboration technologies, including their integration, performance management, and use within mission-focused environments (e.g., Zoom, Teams, AI agents, XLeap/MeetingSphere or equivalent systems).
• Ability to provide operational oversight and technical guidance for multiple facility-based technical events in a dynamic, fast-paced setting.
• Strong analytical, troubleshooting, communication, and problem-solving skills that support independent decision-making in complex technical environments.
• Proficiency in managing and optimizing audio, visual, and teleconferencing system capabilities to support mission and sponsor needs.
• Ability to independently analyze technical or program-related requirements and develop solutions or processes to address operational and logistical challenges.
• Familiarity with security requirements and standards under the cognizance of the Defense Counterintelligence and Security Agency (DCSA).
• Willingness to work full time in a DCSA Approved Area/Closed Area on site.
• The ability to obtain an Interim Secret security clearance by your start date and ultimately obtain a Secret clearance. If selected, you will be subject to a government security clearance investigation and must meet eligibility requirements for access to classified information (U.S. citizenship required).

You'll go above and beyond our minimum requirements if you have...

• A Master’s degree in Engineering, Information Technology, Cybersecurity, Technical Facilities/Operations, Computer Science, or another related field.
• Extensive knowledge and expertise in the integration, optimization, and performance management of telecommunication systems and virtual collaboration platforms such as Zoom and Teams.
• A solid understanding of and experience with DCSA security requirements and standards, and their application within secure technical environments.
• An active Secret or higher-level security clearance.

#LI-AG1

Why Work at APL?

The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.

At APL, we celebrate our differences of perspectives and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities at   

All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law. APL is committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact 

The referenced pay range is based on JHU APL’s good faith belief at the time of posting. Actual compensation may vary based on factors such as geographic location, work experience, market conditions, education/training and skill level with consideration for internal parity. For salaried employees scheduled to work less than 40 hours per week, annual salary will be prorated based on the number of hours worked. APL may offer bonuses or other forms of compensation per internal policy and/or contractual designation. Additional compensation may be provided in the form of a sign-on bonus, relocation benefits, locality allowance or discretionary payments for exceptional performance. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development. Applications are accepted on a rolling basis.