Engineering Journal Jobs in Henderson Nv Remote
266 positions found — Page 13
J
2026 JT4 Electronic Technician Opportunities in Las Vegas, NV
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.
This job announcement encompasses multiple openings in a variety of electronics disciplines.
The disciplines include: Beacons, Digital Electronics, Analog Electronics, Ground Radar and Auto-tracking radar systems, GPS, IFF, Microwave, Measurements, TCP/IP, Telemetry, Communications, and Video.
Selected applicants will work on various types of electronic equipment and related devices by performing a combination of the following: installing, maintaining, repairing, overhauling, troubleshooting, modifying, constructing and testing.
Equipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders Work requires practical application of electronic principles, ability to determine equipment malfunctions, and skills to put equipment in required operating conditions The daily accomplishment of electronic logbook entries, problem reporting and documentation of corrective actions are required PREFERRED KNOWLEDGE/EXPERIENCE Five (5) years of hands-on experience.
Good understanding of tubes, transistors, logic gates and high-power R.F.
sources.
Full ISCET, ETA or FCC Radar endorsement certification.
Education and course work from an ABET accredited technical school with one or more courses in Math, Basic Electronics, Microwave Theory, Telecommunications, Telemetry, and or RF disciplines.
Possess a current TS-SSBI Security Clearance.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Level II: Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory or a military equivalent is required.
At least 3 years of hands-on experience is required.
Level III: Associate's degree or higher from an accredited college or technical school with courses in math, basic electronics, and microwave theory or CCAF military equivalent is required.
At least 7 years of hands-on experience is required.
In addition, Electronic Technicians must meet the following qualifications: Demonstrated proficiency in general electronics (to include AC, DC, digital logic, data acquisition & solid state) and working knowledge of electronic, electro-mechanical, and computer systems along with test equipment used to maintain and repair equipment is necessary.
Experience with tubes, transistors, logic gates, and/or high-power RF devices may be required.
Demonstrated ability to troubleshoot to the component level and competency in soldering.
Possess an intermediate working knowledge of Microsoft Office (Access, Excel, and Word).
Must be able to qualify for and maintain a DoD Top Secret/SSBI security clearance and be adjudicated to the tier process for access to specific programs.
Must possess a valid State issued driver's license.
OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the employee's job.
WORKING CONDITIONS Work hours and shifts may vary and require occasional overnights or weekend work at remote locations.
Occasionally perform assigned tasks indoors/outdoors in a field environment involving low light and moderate noise.
May occasionally climb towers and ladders or perform work in confined spaces.
Lift up to 50 pounds.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JOM68; JELT4; JCORP12
Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and air crews for today's missions and tomorrow's global challenges.
This job announcement encompasses multiple openings in a variety of electronics disciplines.
The disciplines include: Beacons, Digital Electronics, Analog Electronics, Ground Radar and Auto-tracking radar systems, GPS, IFF, Microwave, Measurements, TCP/IP, Telemetry, Communications, and Video.
Selected applicants will work on various types of electronic equipment and related devices by performing a combination of the following: installing, maintaining, repairing, overhauling, troubleshooting, modifying, constructing and testing.
Equipment may include, but is not limited to, the following: transmitting and receiving equipment, digital and analog computers, industrial measuring and controlling equipment, microwave amplifiers and transmission lines, high voltage power supplies and keying circuits, indicators and displays, antenna positioning systems, Ethernet interface equipment, digital-to-analog conversion equipment and analog strip chart recorders Work requires practical application of electronic principles, ability to determine equipment malfunctions, and skills to put equipment in required operating conditions The daily accomplishment of electronic logbook entries, problem reporting and documentation of corrective actions are required PREFERRED KNOWLEDGE/EXPERIENCE Five (5) years of hands-on experience.
Good understanding of tubes, transistors, logic gates and high-power R.F.
sources.
Full ISCET, ETA or FCC Radar endorsement certification.
Education and course work from an ABET accredited technical school with one or more courses in Math, Basic Electronics, Microwave Theory, Telecommunications, Telemetry, and or RF disciplines.
Possess a current TS-SSBI Security Clearance.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE Level II: Education and/or training from an accredited college or technical school with courses in math, basic electronics, and microwave theory or a military equivalent is required.
At least 3 years of hands-on experience is required.
Level III: Associate's degree or higher from an accredited college or technical school with courses in math, basic electronics, and microwave theory or CCAF military equivalent is required.
At least 7 years of hands-on experience is required.
In addition, Electronic Technicians must meet the following qualifications: Demonstrated proficiency in general electronics (to include AC, DC, digital logic, data acquisition & solid state) and working knowledge of electronic, electro-mechanical, and computer systems along with test equipment used to maintain and repair equipment is necessary.
Experience with tubes, transistors, logic gates, and/or high-power RF devices may be required.
Demonstrated ability to troubleshoot to the component level and competency in soldering.
Possess an intermediate working knowledge of Microsoft Office (Access, Excel, and Word).
Must be able to qualify for and maintain a DoD Top Secret/SSBI security clearance and be adjudicated to the tier process for access to specific programs.
Must possess a valid State issued driver's license.
OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the employee's job.
WORKING CONDITIONS Work hours and shifts may vary and require occasional overnights or weekend work at remote locations.
Occasionally perform assigned tasks indoors/outdoors in a field environment involving low light and moderate noise.
May occasionally climb towers and ladders or perform work in confined spaces.
Lift up to 50 pounds.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a federal government contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license or other licenses/certifications, and the inability to obtain and maintain the required clearance, license or certification may affect an employee's ability to maintain employment.
SCC: JOM68; JELT4; JCORP12
Not Specified
J
Field Operations Specialist I
🏢 JT4 LLC
Salary not disclosed
JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S.
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Provides field operations control, coordination, and assistance to current and future customer base.
Work performance contributes to meeting program objectives in a variety of unique and conventional methods.
Performs complex assignments in austere remote areas with widely varying duties.
As a technical advisor and/or group leader, methodically determines cause/effect, reaches conclusions, and recommends a solution in real-time.
Must have the ability to conduct a multitude of functions under stressful conditions in a constantly changing environment.
Independently perform a range of field operational tasks involving designing, locating, and developing remote areas for testing and training applications Contributes to development of design specifications, analyses, or design reviews for complex projects Coordinates and works closely with logistics, financial, and project management to meet customers' requirements Complies with the test plan and customer test/training objectives within the parameters of safety and security.
Supports development of customer testing/training proposals and provides comments on the technical/operational level of effort of the proposed scope of work Conducts established testing/training objectives as directed by Project Manager for each test Directs interface and liaison with customers at all levels to comply with requirements and specifications, from inception to final test activities Conduct site visits and experimental investigations and analyzes problems, proposes solutions and alternatives, and provides recommendations Maintains program schedules, status reports, budgets, plans, and other administrative tasks May perform support operations in areas of weapons safety, weapon engagement zones, airdrop, aircraft handling, logistics and other operations Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A bachelor's degree or completion of equivalent academic, military, or vocational technical training and 4 years of directly related experience in a similar operational environment are required for this position.
In addition, a Field Operations Specialist I must possess the following qualifications: Familiarity with the government organization, structure, and supply (mandatory) Intimate familiarity with the area in which operations are conducted Extensive knowledge of special equipment locations and capabilities, areas of population, Military Operating Areas (MOA), Explosive Ordnance Disposal, and Range operations Knowledge of the Sandia Corporation, rules for the use of restricted air and ground space, Range utilization periods of foreign national military agencies, and Red/Green Flag operations Knowledge of local area procedures including incident/accident procedures, unauthorized personnel entry contingency plans, and other local operating caveats required to conduct an effective and viable test/training program Extensive knowledge of what constitutes a hazardous mission and the coordination steps to ensure safety Ability to conduct a multitude of functions under stressful conditions in a constantly changing environment Good verbal and written communications skills.
SALARY The expected salary range for this position is $75,000 to $87,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee must be able to work duty days in excess of 10 hours, some shift work, at remote locations, occasional overnight assignments, and, on occasion, be separated from family for 3 weeks or longer to meet mission requirements.
Duties are performed in a field environment, both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Outdoor duties may be performed on gravel or a shingled roof.
Grease or oil may be found on working surfaces.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JOM68; JCORP12
Air Force and Navy under the Joint Range Technical Services Contract, better known as J-Tech II.
JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges.
JOB SUMMARY
- ESSENTIAL FUNCTIONS/DUTIES Provides field operations control, coordination, and assistance to current and future customer base.
Work performance contributes to meeting program objectives in a variety of unique and conventional methods.
Performs complex assignments in austere remote areas with widely varying duties.
As a technical advisor and/or group leader, methodically determines cause/effect, reaches conclusions, and recommends a solution in real-time.
Must have the ability to conduct a multitude of functions under stressful conditions in a constantly changing environment.
Independently perform a range of field operational tasks involving designing, locating, and developing remote areas for testing and training applications Contributes to development of design specifications, analyses, or design reviews for complex projects Coordinates and works closely with logistics, financial, and project management to meet customers' requirements Complies with the test plan and customer test/training objectives within the parameters of safety and security.
Supports development of customer testing/training proposals and provides comments on the technical/operational level of effort of the proposed scope of work Conducts established testing/training objectives as directed by Project Manager for each test Directs interface and liaison with customers at all levels to comply with requirements and specifications, from inception to final test activities Conduct site visits and experimental investigations and analyzes problems, proposes solutions and alternatives, and provides recommendations Maintains program schedules, status reports, budgets, plans, and other administrative tasks May perform support operations in areas of weapons safety, weapon engagement zones, airdrop, aircraft handling, logistics and other operations Perform other job-related duties, as required.
REQUIREMENTS
- EDUCATION, TECHNICAL, AND WORK EXPERIENCE A bachelor's degree or completion of equivalent academic, military, or vocational technical training and 4 years of directly related experience in a similar operational environment are required for this position.
In addition, a Field Operations Specialist I must possess the following qualifications: Familiarity with the government organization, structure, and supply (mandatory) Intimate familiarity with the area in which operations are conducted Extensive knowledge of special equipment locations and capabilities, areas of population, Military Operating Areas (MOA), Explosive Ordnance Disposal, and Range operations Knowledge of the Sandia Corporation, rules for the use of restricted air and ground space, Range utilization periods of foreign national military agencies, and Red/Green Flag operations Knowledge of local area procedures including incident/accident procedures, unauthorized personnel entry contingency plans, and other local operating caveats required to conduct an effective and viable test/training program Extensive knowledge of what constitutes a hazardous mission and the coordination steps to ensure safety Ability to conduct a multitude of functions under stressful conditions in a constantly changing environment Good verbal and written communications skills.
SALARY The expected salary range for this position is $75,000 to $87,000 annually.
Note: The salary range offered for this position is a good faith description of the expected salary range this role will pay.
JT4, LLC considers factors such as (but not limited to) responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer.
BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job.
WORKING CONDITIONS Employee must be able to work duty days in excess of 10 hours, some shift work, at remote locations, occasional overnight assignments, and, on occasion, be separated from family for 3 weeks or longer to meet mission requirements.
Duties are performed in a field environment, both indoors and outdoors.
Outdoor duties may be performed on even or uneven surfaces, which may be dry or wet.
Outdoor duties may be performed on gravel or a shingled roof.
Grease or oil may be found on working surfaces.
Climbing stairs, ladders, towers, and scaffolds, and the ability to lift up to 50 lbs, (anything heavier requires two or more people or mechanical assistance) are required.
A government vehicle is used on an as-needed basis.
Travel to remote company work locations may be required.
DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification.
They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified.
Tasking is in support of a Federal Government Contract that requires U.S.
citizenship.
Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment.
SCC: JOM68; JCORP12
Not Specified
E
Operations Coordinator
Salary not disclosed
Energy Project Solutions (EPS) is an energy consulting firm that helps partners deliver efficient, high-value projects through localized expertise and real-world insight. With more than 500 years of collective experience, our team leads complex energy developments from inception through construction, bringing deep knowledge across engineering, real estate, business development, and finance while leveraging strong relationships with developers, owners, financial institutions, and property owners nationwide.
The Operations Coordinator is a junior role for someone who is highly organized, detail-oriented, and excited to learn how a growing business operates behind the scenes. In this role, you’ll support the Operations team by maintaining accurate data, improving internal processes, and helping keep day-to-day workflows running smoothly. You’ll gain hands-on exposure across multiple areas of the business, from operational reporting to talent acquisition support, while working closely with the Director of Operations and collaborating with teams across EPS, gradually taking on more responsibility as your skills grow.
What You’ll Do
- Support day-to-day operations across EPS by maintaining data accuracy, assisting with internal workflows, and helping the business run smoothly.
- Coordinate fleet management needs, including vehicle rentals, new hire vehicle setup, tracking fleet details and invoices, maintenance reminders, and incident reporting in partnership with Safety and Finance.
- Assist with new hire onboarding, candidate and employee travel coordination, and general people operations support.
- Help plan and execute internal company activities and events, including weekly lunches, team socials, and happy hours.
- Support office operations and facility needs, including office upkeep, vendor coordination, and obtaining quotes for tenant improvement or related work.
- Contribute to research-based and special projects, including business development tracking, client research, and real estate research for potential future regional offices.
- Track and follow up on operational tasks and requests to ensure deadlines are met and work is completed accurately.
Who You Are
- You hold a bachelor’s degree in business administration, operations management, or a related field.
- You have 2+ years of experience in an operations, administrative, analyst, or support role.
- You’re comfortable using Microsoft Office (Outlook, Excel, Word, PowerPoint, MS Project) and Adobe Acrobat Pro.
- You’re highly organized, detail-oriented, and reliable.
- You communicate clearly and professionally, both written and verbally.
- You’re eager to learn, ask questions, and contribute to a growing team.
Why EPS?
At EPS, we believe your work should support your life, not the other way around. Here's what you can count on when you join our team:
- Meaningful Growth: Whether you're just starting out or looking to advance, we offer hands-on training, mentorship, and clear paths for professional development so you can grow with purpose.
- Real Collaboration: Join a team that brings diverse perspectives together to solve complex challenges with creativity, curiosity, and a shared commitment to quality.
- Respect for Your Time: We value work-life balance and offer generous PTO and a supportive environment that helps you manage both personal and professional responsibilities.
- Benefits That Care: You’ll have access to health coverage that supports your total well-being, plus a 401(k) match, paid holidays, and more resources to help you thrive.
- Weekly Team Lunches: Take a break and recharge with your teammates. We believe food brings people together.
- Culture That Connects: We invest in experiences that build strong teams and strong communities.
Not Specified
I
Flight Test and Evaluation Engineer
Salary not disclosed
About the Company
The System Test and Evaluation Engineer is a critical role responsible for the end-to-end validation of the complex, multi-vendor Joint Simulation Environment (JSE). This individual will ensure the stability, performance, and operational readiness of the entire technology stack, from the physical hardware layer to the application services. The Test and Evaluation Engineer will not only execute tests but will be responsible for architecting the test strategy itself, developing all required documentation and artifacts from the ground up to create a repeatable, high-assurance validation process.
About the Role
The System Test and Evaluation Engineer is a critical role responsible for the end-to-end validation of the complex, multi-vendor Joint Simulation Environment (JSE). This individual will ensure the stability, performance, and operational readiness of the entire technology stack, from the physical hardware layer to the application services. The Test and Evaluation Engineer will not only execute tests but will be responsible for architecting the test strategy itself, developing all required documentation and artifacts from the ground up to create a repeatable, high-assurance validation process.
Responsibilities
- Test Architecture & Development: Author and maintain comprehensive, from-scratch system test plans, detailed test procedures, and execution checklists that cover the full scope of the JSE architecture.
- End-to-End Test Execution: Perform hands-on validation of the entire system, systematically verifying each architectural block to isolate faults and ensure proper integration.
- Systematic Validation:
- Physical Layer (Layer 0/1): Validate that all hardware components (servers, switches, storage arrays) power on correctly, pass their Power-On Self Tests (POST), and establish stable physical data links.
- Network Fabric (Layer 2/3): Verify that the network infrastructure functions as designed, including proper switch uplinks, VLAN segmentation, firewall policy enforcement, and the correct operation of network services like DHCP.
- Storage Subsystems: Test and validate the functionality of bulk storage arrays (e.g., Dell PowerStore, NetApp appliances) from both a back-end management and front-end data presentation (NFS/iSCSI) perspective.
- Operating Systems: Validate the correct installation, configuration, and security hardening of server operating systems, including Windows Server and Red Hat Enterprise Linux (RHEL 8/9).
- Virtualization & Compute: Confirm that stateful hypervisor systems are performing correctly. Validate the deployment and functionality of VMware vSphere environments. Test the ability of stateless, diskless compute systems to successfully pull OS images from network storage as advertised.
- Documentation & Reporting: Meticulously record all test outcomes, documenting deltas from expected results, and gathering all necessary log files and screenshots to serve as test artifacts.
- Stakeholder Communication: Translate complex technical findings, test results, and system behaviors into clear, concise, and understandable information for less technical decision-makers and stakeholders.
Qualifications
- Ability to obtain and maintain DoD TS/SCI and Active or must be eligible for SAP (Special Access Program) clearance.
- 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; 0 years experience with PhD or Juris Doctorate in related field; or High School Diploma or equivalent and 9 years relevant experience.
- Experience: 5 years of experience in systems integration and testing.
Required Skills
- Demonstrated experience in testing complex, multi-vendor, integrated IT systems.
- Deep, hands-on knowledge across the entire technology stack, including:
- Operating Systems: Strong proficiency in the administration and testing of Windows Server and Red Hat Enterprise Linux (RHEL 8/9) environments.
- Virtualization Platforms: In-depth knowledge and hands-on experience with VMware vSphere, including ESXi, vCenter, vSAN, and virtual networking.
- Physical Layer Validation: Verifying system POST, hardware health (e.g., iDRAC/IPMI), and Layer 1 network connectivity.
- Network Infrastructure: Strong understanding of Layer 2 (VLANs, trunking) and Layer 3 (IP routing, firewall policies). Experience verifying network services like DHCP.
- Storage Systems: Experience with both SAN (iSCSI) and NAS (NFS) protocols. Familiarity with enterprise storage platforms is essential.
- Stateless & Network-Based Deployment: A firm grasp of PXE boot workflows, TFTP, and the processes for deploying diskless compute nodes.
- Proven ability to author high-quality technical documentation, including test plans and procedures, from scratch.
- Exceptional communication and presentation skills, with a verifiable ability to brief non-technical leadership on complex technical subjects.
- A self-starting, architectural mindset capable of independently analyzing a system, identifying test requirements, and executing a comprehensive validation strategy.
Preferred Skills
- Aviation background
- Engineering degree
Pay range and compensation package
Compensation: $55/hr to $57/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start day 1 of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.
Equal Opportunity Statement
We are committed to diversity and inclusivity.
Not Specified
B
Project Manager
Salary not disclosed
Project Manager
Location: Hybrid in Las Vegas, NV
A global manufacturer of premium commercial interior solutions is expanding its U.S. project‐delivery team. They partner with architects, contractors, and design visionaries to outfit high-profile venues—from arenas and performing-arts centers to corporate auditoriums—with innovative, permanently installed fixture systems. As the new Project Manager, you will steer complex installation programs from contract hand-off through final walkthrough, ensuring every project lands on time, on budget, and to world-class quality standards. If you enjoy owning the schedule, protecting margin, and building lasting client relationships, this high-visibility role is your chance to help shape a fast-growth North American operation.
Position Highlights
- Autonomy & influence: Report directly to U.S. leadership, with authority to refine processes and mentor junior teammates.
- Premium projects: Oversee showcase installations for sports, entertainment, and education clients nationwide.
- Growth runway: Company pipeline is projected to triple over the next three years—your role grows with it.
Benefits & Perks
- Competitive base salary.
- Company credit card for all travel expenses.
- Medical, dental, and vision coverage plus 401(k) participation.
- PTO with paid holidays.
- Join a design-driven culture where your expertise shapes iconic spaces across North America.
Key Responsibilities
- Own full project life-cycle—scope validation, scheduling, budgeting, resource planning, subcontractor oversight, installation supervision, and close-out documentation.
- Act as the primary liaison among general contractors, architects, design teams, field crews, suppliers, and internal stakeholders, resolving issues quickly and diplomatically.
- Safeguard margin and quality by monitoring cost drivers, change orders, and risk; implement mitigation plans to maintain target KPIs.
- Ensure regulatory compliance with state licensing, permitting, safety, and QA/QC requirements; maintain an active Nevada contractor license.
- Conduct regular site visits (~30–40 percent travel) to validate progress, troubleshoot field challenges, and complete punch-list activities.
- Leverage modern construction tech (Revit/BIM, cloud-based contract-management and scheduling tools) to track documentation and drive transparency.
- Champion continuous improvement by documenting best practices and mentoring junior staff to elevate overall project performance.
Desired Skills & Qualifications
- Active Nevada C26B contractor license required.
- 5+ years’ experience managing specialty interior or fixture installations, large-scale commercial build-outs, or comparable construction projects.
- Bachelor’s degree in Construction Management, Engineering, Business, or related field.
- Proven success juggling tight schedules, margin-sensitive budgets, and multi-stakeholder environments.
- Strong technical literacy with construction processes, specifications, and contract terms.
- Excellent communication, organization, and problem-solving skills—comfortable presenting to executives and trade partners alike.
- Willing and able to travel up to 40 percent domestically; occasional international travel for factory or vendor visits.
About Blue Signal:
Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS
Not Specified
D
Senior Engineer, Global Services - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
Not Specified
N
O&G Terminals Controls Engineer - Remote/Travel
Salary not disclosed
Position Summary: Remote/Office based with up to 25% travel Need to be located in MST or CST Timezone HFS Midstream is seeking an experienced Controls Engineer to support product distribution terminals across our enterprise.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
Not Specified
D
Quality Engineer 2 - Remote
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Not Specified
F
Assistant Project Manager- Hybrid/WFH
Salary not disclosed
Assistant Project Manager
Construction | Chicago, IL | Hybrid Flexibility
A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.
This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.
The Opportunity
- The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
- You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.
Key Responsibilities
- Support the planning and execution of construction projects valued up to $200M+.
- Assist in managing projects from preconstruction through project closeout.
- Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
- Work closely with internal architectural and engineering teams within the integrated AEC environment.
- Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
- Help maintain project schedules, documentation, and reporting.
- Support communication between clients, consultants, subcontractors, and internal teams.
- Participate in project meetings and assist in tracking action items and deliverables.
- Ensure project documentation complies with safety standards, contractual requirements, and company procedures.
Qualifications
- 2 to 6 years of construction project management experience.
- Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
- Exposure to projects valued $10M to $100M+.
- Strong organizational and coordination skills.
- Ability to support project financials, schedules, and documentation.
- Excellent communication and teamwork capabilities.
- Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.
Why Join
- Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
- Opportunity to work on complex projects across multiple sectors.
- Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
- Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
- Downtown Chicago office with a hybrid work schedule with 2 days work from home.
Remote working/work at home options are available for this role.
Not Specified
D
Training Coordinator - Hybrid
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
internship
jobs by
✓ All jobs loaded