Engineering Journal Jobs in Guilderland
56 positions found — Page 5
S
Standard Cell / GPIO Design Engineer (2 nm Technology Node)
Salary not disclosed
Job Title:
Standard Cell / GPIO Design Engineer (2 nm Technology Node)
Team: Enablement / Foundation IP Development
Location: Albany (NY), Santa Clara (CA), or Tokyo (Japan)
Overview
Rapidus Corporation is developing next-generation semiconductor technologies at the 2 nm node and beyond.
We are seeking skilled engineers to join our Foundation IP Design Team, focusing on Standard Cell and GPIO (General Purpose I/O) development.
Engineers with expertise in circuit design, layout, reliability, or DTCO are all welcome.
This position involves close collaboration with process, device, and enablement teams to deliver high-quality, high-performance IP that supports leading-edge logic technologies.
Key Responsibilities
- Design and optimize standard cells and GPIO circuits (input/output buffers, level shifters, ESD structures, and special cells) for advanced technology nodes.
- Perform transistor-level circuit design and HSPICE simulations for performance, leakage, and robustness verification across PVT corners.
- Collaborate with layout engineers to ensure design rule compliance, area efficiency, and manufacturability.
- Work with process integration and DTCO teams to co-optimize transistor architectures, layout patterns, and reliability structures.
- Support characterization and model generation for timing, power, and noise modeling.
- Participate in ESD and latch-up design verification, ensuring compliance with foundry reliability standards.
- Analyze silicon test results and feedback for model correlation and IP quality improvement.
- Cooperate with EDA vendors and PDK teams to validate design enablement and sign-off flows.
Required Qualifications
- B.S. or M.S. in Electrical Engineering, Electronics, or Microelectronics.
- 3+ years of experience in standard cell, I/O, or custom circuit design for advanced CMOS nodes (≤ 5 nm preferred).
- Strong understanding of CMOS device behavior, low-power design techniques, and circuit optimization.
- Hands-on experience with EDA tools for schematic design, simulation, and layout verification (e.g., Cadence Virtuoso, HSPICE, Calibre).
- Familiarity with DRC/LVS/EMIR verification flows and reliability checks.
- Strong problem-solving, analytical, and cross-functional collaboration skills.
- Effective communication and documentation skills in English.
Preferred Qualifications
- Experience with nanosheet / GAA transistor architectures or FinFET-based IP design.
- Familiarity with DTCO and library automation / QA flows (Python, TCL, etc.).
- Experience with test-chip development or IP qualification (Level-1 / Level-2).
- Knowledge of characterization tools (Liberate, SiliconSmart) and Liberty model validation.
- Understanding of ESD protection, latch-up prevention, and pad ring integration.
- Japanese language proficiency is a plus.
Not Specified
E
Technical Sales Associate- Clinical AI Solutions
🏢 EndoSoft
Salary not disclosed
JOB SUMMARY:
We are seeking a dynamic Technical Sales Associate to join our Sales & Marketing team. In this hybrid technical and business role, you will bridge the gap between advanced AI solutions and the clinical environments where they make the biggest impact. You will work closely with the Director of Business Development throughout the sales cycle, helping to qualify leads, conduct product demonstrations, and address customer technical questions to secure new business. This role will also be required to be engaging clients and collaborating with our software development team to ensure our products meet market needs.
JOB ACCOUNTABILITIES:
- Collaborate with the Director of Business Development to create and implement effective sales and marketing strategies.
- Assist in all stages of the sales process, from initial discovery and needs analysis to solution design and post-sale technical support hand-off.
- Act as a technical resource for prospect and customer meetings for in-depth technical questions about our AI models, APIs, integrations, and deployment options.
- Deliver engaging product demonstrations and training sessions—both online and in person—to prospective and existing clients.
- Develop deep expertise in Argus AI products from both a technical and sales perspective.
- Act as a liaison between Sales, Software Development teams, and Marketing teams to communicate customer feedback and technical requirements.
- Travel domestically and internationally to support business development, sales, and customer engagement.
SUPERVISORY RESPONSIBILITY:
This position has no immediate supervisory responsibilities.
WORK ENVIRONMENT & PHYSICAL DEMANDS:
This job operates in an office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, scanners, electronic filling of information and fax machines. The physical demands to successfully perform the essential functions of this job are as follows:
- While performing the duties of this job, the employee is regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard reach, stoop kneel to occasionally install study-related computer equipment.
- The employee is occasionally required to climb or balance and crouch or crawl.
- The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
POSITION TYPE/ EXPECTED HOURS OF WORK:
This is a Full-Time Exempt position. Typical workdays are Monday – Friday and typical work hours are 8:30 am – 5:00pm EDT. Possibility to work before or after typical hours as needed to meet study timelines and goals. Infrequent but possible weekend work as needed.
TRAVEL: Ability to travel around 50% of the year, domestic & international - As needed to the Schenectady NY headquarters, to visit existing customers, prospects, study partners, and attend trade shows as assigned.
JOB QUALIFICATIONS:
- Option 1: Master’s degree in Artificial Intelligence, Machine Learning, Data Science, Computer Science (AI specialization), or Biomedical Informatics.
- Option 2: Bachelor’s degree in Statistics, Mathematics, Computer Science, or Engineering PLUS an MBA in Marketing or Business Development.
- Strong understanding of machine learning concepts, AI models, and data science workflows.
- Strong technical aptitude, proficiency with cloud platforms like Oracle, AWS/Azure, programming languages like Python/JavaScript, databases, APIs, and etc.
- Strong presentation and public speaking skills.
- Exceptional verbal and written communication skills with the ability to explain complex technical and AI concepts to both technical and non-technical audiences, and interpersonal skills.
- Demonstrated passion for innovation in healthcare.
Preferred Qualifications
- Knowledge of healthcare IT systems, clinical workflows, and medical terminology.
- Familiarity with CRM systems.
- Certifications in AI for healthcare or sales/marketing are an asset.
Pay Range:
$70,000-$85,000 based on experience
OTHER DUTIES:
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
About Us
EndoSoft is a software development company that was founded in the late 90’s. EndoSoft has recently launched an artificial intelligence platform, the Argus AI Ecosystem, and it is at the forefront of AI-powered clinical solutions. Argus AI is transforming how healthcare providers deliver care by providing time saving tools in the Electronic Health Record (EHR) space. We combine cutting-edge artificial intelligence with deep clinical insight to enhance workflow efficiency, streamline clinical documentation, and improve patient outcomes.
Why Join EndoSoft?
- Be part of a pioneering team shaping the future of AI in healthcare.
- Work on groundbreaking projects that have a real-world clinical impact.
- Opportunities for professional growth, travel, and cross-functional collaboration.
- Competitive salary and benefits package.
Not Specified
F
Online Budgeting Insights Contributor
$28 per hour - monthly
We are seeking individuals to review and provide feedback on everyday money-management tips. This role focuses on common financial challenges such as managing expenses, reducing spending, and making smarter financial choices.
You will review examples of budgeting methods and evaluate practical ideas people use to stretch their income. The goal is to understand which approaches work best for real households.
The work is flexible and fully online. Applicants should have an interest in budgeting, saving money, or improving financial habits.
No formal finance background is required.
Remote working/work at home options are available for this role.
temporary
J
Mechanical Designer - Architecture & Engineering
🏢 Jobot
Salary not disclosed
Mechanical Engineer
- Revit This Jobot Job is hosted by: Nick Frei Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $95,000 per year A bit about us: We are a multidisciplinary design and engineering firm with global offices servicing a wide variety of customers in healthcare, aerospace, education, government, and hospitality.
Due to continued internal growth and the need to keep up with customer demands, we have an immediate need for a Mechanical Engineer.
Ideal candidates will be proficient with Revit.
This is a fulltime, direct hire role out of our Albany, NY location.
After a probationary time, this will be a hybrid schedule (2 days WFH).
Why join us?
* Competitive salary + comprehensive benefits including medical, vision, dental, disability, 401k
* Employee stock ownership eligibility
* Flexible PTO
* Long-term career growth opportunities Job Details Is your background a match?
* Minimum of an Associates Degree
* 4+ years of mechanical engineering experience for a construction, architecture, or engineering company
* PE certification is highly desirable, but not required
* Proficient in the use of Revit and other engineering design tools
* Strong knowledge in the design of heating, cooling, heat rejection, air distribution, ventilation, AC, building automation and controls
* Understanding of mechanical design, physics, microfabrication, CAD and data analysis
* Strong communication and interpersonal skills, with a proven ability to present complex technical information in a clear and concise manner
* Committed to continuous learning and professional development.
What will you be doing?
* Coordinate and prepare schematic design, design development, and construction documents
* Assist in spatial coordination with architecture and other engineering systems
* Process contractor submittals and perform on site condition surveys
* Work collaboratively in a cross-discipline environment to produce integrated project documents, and insure integrated design approaches & solutions Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
- Revit This Jobot Job is hosted by: Nick Frei Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $95,000 per year A bit about us: We are a multidisciplinary design and engineering firm with global offices servicing a wide variety of customers in healthcare, aerospace, education, government, and hospitality.
Due to continued internal growth and the need to keep up with customer demands, we have an immediate need for a Mechanical Engineer.
Ideal candidates will be proficient with Revit.
This is a fulltime, direct hire role out of our Albany, NY location.
After a probationary time, this will be a hybrid schedule (2 days WFH).
Why join us?
* Competitive salary + comprehensive benefits including medical, vision, dental, disability, 401k
* Employee stock ownership eligibility
* Flexible PTO
* Long-term career growth opportunities Job Details Is your background a match?
* Minimum of an Associates Degree
* 4+ years of mechanical engineering experience for a construction, architecture, or engineering company
* PE certification is highly desirable, but not required
* Proficient in the use of Revit and other engineering design tools
* Strong knowledge in the design of heating, cooling, heat rejection, air distribution, ventilation, AC, building automation and controls
* Understanding of mechanical design, physics, microfabrication, CAD and data analysis
* Strong communication and interpersonal skills, with a proven ability to present complex technical information in a clear and concise manner
* Committed to continuous learning and professional development.
What will you be doing?
* Coordinate and prepare schematic design, design development, and construction documents
* Assist in spatial coordination with architecture and other engineering systems
* Process contractor submittals and perform on site condition surveys
* Work collaboratively in a cross-discipline environment to produce integrated project documents, and insure integrated design approaches & solutions Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
A
Senior Project Engineering Manager
Salary not disclosed
Summary: Location: Schenectady, NY
- Can work Full Remote Must be EST Hours Duration: 12 Months Travel: Approx.
1 week per month within U.S., Latin America, and globally Hours: 40 hours/week, no overtime rate Responsibilities: Execute engineering portion of OTR contracts with Balance of Plant (BOP) scope Manage project control activity globally, ensuring consistent functional specifications and processes Serve as technical leader to develop scope of work, plan schedule, and monitor engineering activities Provide technical leadership and interface with various stakeholders including Proposal Management, Cost Estimating, and Customers Own engineering execution of BOP-scoped projects from contract signature to completion Manage cross-functional engineering team to address contract risks and opportunities Provide technical guidance and assistance to Project Management and internal engineering teams Review Customer specifications and communicate project requirements Evaluate financial/schedule impact of Customer requested scope changes Provide technical support to ensure equipment meets Customer requirements and business objectives Enforce quality procedures and participate in improvements Capture issues for experience feedback (Lessons Learned) Requirements: Bachelor's or higher degree in Engineering or related STEM program Minimum of 6 years of related industry experience with increasing responsibilities Required Skills: Strong interpersonal and leadership skills Ability to lead programs/projects Documenting, planning, marketing, and executing programs Creativity and problem-solving capability Ability to manage multiple priorities simultaneously Excellent oral and written communication skills Motivated and able to motivate others Continuous improvement mindset Customer interface experience Preferred Skills: Technical superior training with experience in project/team management in energy or transverse teams Knowledge of Mechanical & electrical codes and compliance Knowledge of Turbo machinery, generator, electrical, controls, and/or Power Plant Accessory systems Expertise in Mechanical, Electrical, or Process disciplines
- Can work Full Remote Must be EST Hours Duration: 12 Months Travel: Approx.
1 week per month within U.S., Latin America, and globally Hours: 40 hours/week, no overtime rate Responsibilities: Execute engineering portion of OTR contracts with Balance of Plant (BOP) scope Manage project control activity globally, ensuring consistent functional specifications and processes Serve as technical leader to develop scope of work, plan schedule, and monitor engineering activities Provide technical leadership and interface with various stakeholders including Proposal Management, Cost Estimating, and Customers Own engineering execution of BOP-scoped projects from contract signature to completion Manage cross-functional engineering team to address contract risks and opportunities Provide technical guidance and assistance to Project Management and internal engineering teams Review Customer specifications and communicate project requirements Evaluate financial/schedule impact of Customer requested scope changes Provide technical support to ensure equipment meets Customer requirements and business objectives Enforce quality procedures and participate in improvements Capture issues for experience feedback (Lessons Learned) Requirements: Bachelor's or higher degree in Engineering or related STEM program Minimum of 6 years of related industry experience with increasing responsibilities Required Skills: Strong interpersonal and leadership skills Ability to lead programs/projects Documenting, planning, marketing, and executing programs Creativity and problem-solving capability Ability to manage multiple priorities simultaneously Excellent oral and written communication skills Motivated and able to motivate others Continuous improvement mindset Customer interface experience Preferred Skills: Technical superior training with experience in project/team management in energy or transverse teams Knowledge of Mechanical & electrical codes and compliance Knowledge of Turbo machinery, generator, electrical, controls, and/or Power Plant Accessory systems Expertise in Mechanical, Electrical, or Process disciplines
Not Specified
J
Quality Engineering Manager
🏢 Jobot
Salary not disclosed
This Jobot Job is hosted by: Andrew Nguyen Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $90,000
- $130,000 per year A bit about us: We are a leading manufacturer of specialized and multifunction machines for railway, automotive, aerospace, and other industrial manufacturers worldwide.
Our machines are used for the maintenance and production of wheel sets, axles, and wheels on locomotives, freight cars, and commuter and light rail vehicles.
Our automation systems support railway maintenance facilities as well as other manufacturing industries.
Why join us? 90-130k Base! Annual Bonuses! Flex Schedule! 401K Matching! Accelerated Career Growth! Challenging Problems! Job Details The Manager, Quality Engineering leads the Quality function to ensure products, components, and manufacturing processes consistently meet customer requirement and industry standards.
This role is responsible for maintaining and enhancing the Quality Management System (QMS), driving ISO 9001 compliance, and implementing practical, data-driven improvements across manufacturing operations.
The Manager will lead a team of Quality Assurance Technicians and a Manufacturing Quality Engineer partnering closely with Engineering, Manufacturing, Planning, and executive leadership to ensure high-quality production and continuous improvement.
Key Responsibilities Lead, coach, and develop the Quality team, including assigning work, monitoring performance, and fostering growth.
Collaborate with Engineering and Manufacturing to define quality requirements for products and processes.
Drive defect prevention initiatives and continuous improvement activities across the organization.
Assist in the development of quality management system (QMS) and ISO 9001 registration processes.
Support and lead internal and external audits, including ISO 9001 registration and surveillance audits.
Ensure quality procedures are documented, current and consistently followed.
Oversee corrective and preventive action process (CAPA), including root cause analysis and verification of effectiveness.
Investigate customer complaints and lead resolution through root cause analysis and corrective action plans.
Monitor and report on Cost of Poor Quality (COPQ), including scrap, rework, and warranty trends.
Collaborate with Purchasing to monitor supplier quality and support strategic supplier initiatives.
Create, develop, and maintain processes for customer acceptance and inspection, ensuring completeness and readiness for factory acceptance testing.
Travel as required to strategic vendors, customers, and benchmark target companies.
Education and Skills: Bachelor’s degree in Engineering or related technical discipline (or equivalent experience).
7+ years of experience in manufacturing quality, preferably in capital equipment, heavy industrial, or rail-related industries.
Demonstrated experience with ISO 9001 and Quality Management Systems.
Prior experience managing or supervising quality personnel.
Strong root cause analysis, CAPA (Corrective and Preventive Action), and problem-solving skills.
Working knowledge of measuring and inspection tools.
Ability to read and interpret engineering drawings and apply GD&T.
Strong communication skills with the ability to engage all levels of the organization.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $90,000
- $130,000 per year A bit about us: We are a leading manufacturer of specialized and multifunction machines for railway, automotive, aerospace, and other industrial manufacturers worldwide.
Our machines are used for the maintenance and production of wheel sets, axles, and wheels on locomotives, freight cars, and commuter and light rail vehicles.
Our automation systems support railway maintenance facilities as well as other manufacturing industries.
Why join us? 90-130k Base! Annual Bonuses! Flex Schedule! 401K Matching! Accelerated Career Growth! Challenging Problems! Job Details The Manager, Quality Engineering leads the Quality function to ensure products, components, and manufacturing processes consistently meet customer requirement and industry standards.
This role is responsible for maintaining and enhancing the Quality Management System (QMS), driving ISO 9001 compliance, and implementing practical, data-driven improvements across manufacturing operations.
The Manager will lead a team of Quality Assurance Technicians and a Manufacturing Quality Engineer partnering closely with Engineering, Manufacturing, Planning, and executive leadership to ensure high-quality production and continuous improvement.
Key Responsibilities Lead, coach, and develop the Quality team, including assigning work, monitoring performance, and fostering growth.
Collaborate with Engineering and Manufacturing to define quality requirements for products and processes.
Drive defect prevention initiatives and continuous improvement activities across the organization.
Assist in the development of quality management system (QMS) and ISO 9001 registration processes.
Support and lead internal and external audits, including ISO 9001 registration and surveillance audits.
Ensure quality procedures are documented, current and consistently followed.
Oversee corrective and preventive action process (CAPA), including root cause analysis and verification of effectiveness.
Investigate customer complaints and lead resolution through root cause analysis and corrective action plans.
Monitor and report on Cost of Poor Quality (COPQ), including scrap, rework, and warranty trends.
Collaborate with Purchasing to monitor supplier quality and support strategic supplier initiatives.
Create, develop, and maintain processes for customer acceptance and inspection, ensuring completeness and readiness for factory acceptance testing.
Travel as required to strategic vendors, customers, and benchmark target companies.
Education and Skills: Bachelor’s degree in Engineering or related technical discipline (or equivalent experience).
7+ years of experience in manufacturing quality, preferably in capital equipment, heavy industrial, or rail-related industries.
Demonstrated experience with ISO 9001 and Quality Management Systems.
Prior experience managing or supervising quality personnel.
Strong root cause analysis, CAPA (Corrective and Preventive Action), and problem-solving skills.
Working knowledge of measuring and inspection tools.
Ability to read and interpret engineering drawings and apply GD&T.
Strong communication skills with the ability to engage all levels of the organization.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
S
Multimedia Journalist
Salary not disclosed
WRGB/WCWN CBS 6 is looking for a Multimedia Journalist.
Your responsibilities as an MMJ will include reporting, shooting and editing news stories, enterprising story ideas, developing contacts, as well as other responsibilities as assigned.
You will be expected to produce daily content on a variety of platforms including our website, social media sites and television.
Skills and Experience: Sharp news judgment Excellent technical skills The ability to work well independently and with others Must have and maintain a valid license and a good driving record A Journalism degree is preferred When applying online, please include a link to your online demo reel.
The base hourly compensation range for this role is $18.90 to $20.90 per hour.
Final compensation for this role will be determined by various factors such as a candidates’ relevant work experience, skills, certifications, and geographic location.
Full time positions are eligible for benefits that include participation in a retirement plan, life and disability insurance, health, dental and vision plans, flexible spending accounts, sick leave, vacation time, personal time, parental leave and employee stock purchase plan.
Sinclair is proud to be an equal opportunity employer and a drug free workplace.
Employment practices will not be influenced or affected by virtue of an applicant's or employee's race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, military or veteran status or any other characteristic protected by law.
About Us Sinclair, Inc.
(Nasdaq: SBGI) is a diversified media company and a leading provider of local news and sports.
The Company owns, operates, and/or provides services to 178 television stations in 81 markets affiliated with all major broadcast networks; owns Tennis Channel, the premium destination for tennis enthusiasts; multicast networks CHARGE, Comet, ROAR, and The Nest.
Sinclair’s AMP Media produces a growing portfolio of digital content and original podcasts.
Additional information about Sinclair can be found at the Team The life-blood of our organization is our people.
We have a compelling story, a goal-oriented culture, and we take really good care of people.
How good? Here is a glimpse: great benefits, open door policy, upward mobility and a strong desire to see you succeed.
Ready to be part of a winning team? Let’s talk.
Your responsibilities as an MMJ will include reporting, shooting and editing news stories, enterprising story ideas, developing contacts, as well as other responsibilities as assigned.
You will be expected to produce daily content on a variety of platforms including our website, social media sites and television.
Skills and Experience: Sharp news judgment Excellent technical skills The ability to work well independently and with others Must have and maintain a valid license and a good driving record A Journalism degree is preferred When applying online, please include a link to your online demo reel.
The base hourly compensation range for this role is $18.90 to $20.90 per hour.
Final compensation for this role will be determined by various factors such as a candidates’ relevant work experience, skills, certifications, and geographic location.
Full time positions are eligible for benefits that include participation in a retirement plan, life and disability insurance, health, dental and vision plans, flexible spending accounts, sick leave, vacation time, personal time, parental leave and employee stock purchase plan.
Sinclair is proud to be an equal opportunity employer and a drug free workplace.
Employment practices will not be influenced or affected by virtue of an applicant's or employee's race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, military or veteran status or any other characteristic protected by law.
About Us Sinclair, Inc.
(Nasdaq: SBGI) is a diversified media company and a leading provider of local news and sports.
The Company owns, operates, and/or provides services to 178 television stations in 81 markets affiliated with all major broadcast networks; owns Tennis Channel, the premium destination for tennis enthusiasts; multicast networks CHARGE, Comet, ROAR, and The Nest.
Sinclair’s AMP Media produces a growing portfolio of digital content and original podcasts.
Additional information about Sinclair can be found at the Team The life-blood of our organization is our people.
We have a compelling story, a goal-oriented culture, and we take really good care of people.
How good? Here is a glimpse: great benefits, open door policy, upward mobility and a strong desire to see you succeed.
Ready to be part of a winning team? Let’s talk.
Not Specified
J
Electrical Engineer (PE)
🏢 Jobot
Salary not disclosed
Calling all Electrical Engineer (PE) This Jobot Job is hosted by: Mordy Ornguze Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $78,000
- $190,000 per year A bit about us: We are seeking a highly skilled Electrical Engineer (PE) with 4 to 15 years of experience to join our growing engineering team.
This role supports the design and delivery of MEP and mission‑critical electrical systems for commercial, industrial, and data center environments.
Ideal candidates are detail‑oriented, technically strong, and passionate about delivering high‑availability, resilient engineering solutions.
Why join us? Why Join Us? Opportunity to work on complex, high‑impact engineering projects.
Supportive, engineering‑driven culture with growth and mentorship opportunities.
Competitive compensation and benefits.
Stability and long‑term project pipeline in both markets (Plano, TX and Albany, NY).
Job Details Electrical Design & Engineering Design electrical power distribution systems including medium and low voltage, grounding, lighting, and emergency/backup power systems.
Produce high‑quality engineering drawings, specifications, one‑line diagrams, and calculation packages.
Perform arc flash, load flow, fault current, and coordination studies.
Create electrical system layouts such as cable tray routing, panel schedules, equipment selections, and device layouts.
Project Execution & Coordination Lead or contribute to multidisciplinary project teams across mechanical, electrical, plumbing, and commissioning disciplines.
Perform site surveys, field verification, and construction administration support (submittals, RFIs, punch lists, site observations).
Support project documentation including basis‑of‑design narratives, design reports, and technical memoranda.
Work closely with internal teams, architects, contractors, and stakeholders to ensure seamless project delivery.
Quality, Compliance, & Reliability Apply relevant codes and standards (NEC, NFPA, IEEE, ASHRAE, IBC, etc.).
Ensure designs meet high‑availability and mission‑critical requirements such as redundancy, maintainability, and lifecycle performance.
Maintain rigorous QA/QC throughout project development.
Technical Leadership & Collaboration Mentor junior engineers and designers, providing technical guidance and training.
Participate in internal design reviews and collaborate across disciplines to develop efficient, coordinated MEP solutions.
Interface with equipment vendors, contractors, and clients to ensure accurate system integration.
Qualifications Required Bachelor’s degree in Electrical Engineering from an accredited institution.
Active U.S.
Professional Engineer (PE) license.
4–15 years of experience in electrical engineering within MEP consulting, building systems, industrial, or mission‑critical environments.
Proficiency with AutoCAD and/or Revit; familiarity with Bluebeam and Microsoft Office.
Demonstrated experience producing full electrical design packages.
Strong understanding of electrical codes, standards, and calculations.
Preferred Experience with mission‑critical / data center electrical systems.
Experience with short‑circuit, arc flash, load flow, and coordination studies using ETAP or SKM.
Commissioning support experience.
Multi‑state design exposure or ability to obtain additional licensure.
What We’re Looking For Strong communication and interpersonal skills.
Problem‑solvers who take initiative and collaborate naturally.
Engineers who thrive in a fast‑paced environment and deliver high‑quality, technically excellent work.
Individuals aligned with our values: collaboration, innovation, technical rigor, and commitment to client success.
Work Environment Office‑based with occasional site visits.
Opportunities to work on advanced MEP systems and mission‑critical facilities.
Collaborative team environment with cross‑disciplinary coordination.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $78,000
- $190,000 per year A bit about us: We are seeking a highly skilled Electrical Engineer (PE) with 4 to 15 years of experience to join our growing engineering team.
This role supports the design and delivery of MEP and mission‑critical electrical systems for commercial, industrial, and data center environments.
Ideal candidates are detail‑oriented, technically strong, and passionate about delivering high‑availability, resilient engineering solutions.
Why join us? Why Join Us? Opportunity to work on complex, high‑impact engineering projects.
Supportive, engineering‑driven culture with growth and mentorship opportunities.
Competitive compensation and benefits.
Stability and long‑term project pipeline in both markets (Plano, TX and Albany, NY).
Job Details Electrical Design & Engineering Design electrical power distribution systems including medium and low voltage, grounding, lighting, and emergency/backup power systems.
Produce high‑quality engineering drawings, specifications, one‑line diagrams, and calculation packages.
Perform arc flash, load flow, fault current, and coordination studies.
Create electrical system layouts such as cable tray routing, panel schedules, equipment selections, and device layouts.
Project Execution & Coordination Lead or contribute to multidisciplinary project teams across mechanical, electrical, plumbing, and commissioning disciplines.
Perform site surveys, field verification, and construction administration support (submittals, RFIs, punch lists, site observations).
Support project documentation including basis‑of‑design narratives, design reports, and technical memoranda.
Work closely with internal teams, architects, contractors, and stakeholders to ensure seamless project delivery.
Quality, Compliance, & Reliability Apply relevant codes and standards (NEC, NFPA, IEEE, ASHRAE, IBC, etc.).
Ensure designs meet high‑availability and mission‑critical requirements such as redundancy, maintainability, and lifecycle performance.
Maintain rigorous QA/QC throughout project development.
Technical Leadership & Collaboration Mentor junior engineers and designers, providing technical guidance and training.
Participate in internal design reviews and collaborate across disciplines to develop efficient, coordinated MEP solutions.
Interface with equipment vendors, contractors, and clients to ensure accurate system integration.
Qualifications Required Bachelor’s degree in Electrical Engineering from an accredited institution.
Active U.S.
Professional Engineer (PE) license.
4–15 years of experience in electrical engineering within MEP consulting, building systems, industrial, or mission‑critical environments.
Proficiency with AutoCAD and/or Revit; familiarity with Bluebeam and Microsoft Office.
Demonstrated experience producing full electrical design packages.
Strong understanding of electrical codes, standards, and calculations.
Preferred Experience with mission‑critical / data center electrical systems.
Experience with short‑circuit, arc flash, load flow, and coordination studies using ETAP or SKM.
Commissioning support experience.
Multi‑state design exposure or ability to obtain additional licensure.
What We’re Looking For Strong communication and interpersonal skills.
Problem‑solvers who take initiative and collaborate naturally.
Engineers who thrive in a fast‑paced environment and deliver high‑quality, technically excellent work.
Individuals aligned with our values: collaboration, innovation, technical rigor, and commitment to client success.
Work Environment Office‑based with occasional site visits.
Opportunities to work on advanced MEP systems and mission‑critical facilities.
Collaborative team environment with cross‑disciplinary coordination.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Senior Architect/Designer - Albany
🏢 Jobot
Salary not disclosed
Senior Licensed Architect/Designer who is proficient in Revit and experienced in construction documentation.
Great compensation package, bonus, benefits, and more.
This Jobot Job is hosted by: Sam Stimac Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $145,000 per year A bit about us: An architecture firm in New York state and beyond, we are looking to add a Senior Designer/Architect with 10+ years of experience to our Albany office.
Multiple offices throughout New York, and focus in architecture, engineering, environmental, and consulting within government, institutional, healthcare, education, municipal, and more.
We are known around the east coast for the services we provide, our portfolio of work, and our staff of employees that consistently deliver.
We take pride in the work we do, the clients we engage with, and the culture we create from within.
With the current needs of our clients and new potential clients, we are growing internally.
This individual would be joining an outstanding large-scale project that will run years.
If you are looking to go to a growing company that does complex work, apply today! Why join us? Competitive compensation Medical, dental, and vision offered Bonus structure PTO (15+ days) Sick days Maternity/Paternity leave Cell phone, laptop Growth opportunity Job Details Job Details: We are looking for a Senior Designer/Architect to join our team.
This is an exciting opportunity for a highly motivated individual to apply their skills and knowledge.
We are looking for a professional who is passionate about design, architecture, and engineering, and is proficient in using Revit.
This is a permanent, full-time position that offers a competitive salary and benefits package.
Responsibilities: 1.
Lead the development of design concepts and ensure they are in line with project objectives and client needs.
2.
Collaborate with project teams to develop and refine architectural designs.
3.
Utilize Bluebeam software for design development, project management, and document control.
4.
Oversee the production of detailed drawings and specifications for construction purposes.
5.
Conduct site visits to ensure construction is in accordance with design and specifications.
6.
Provide technical guidance and mentorship to junior design staff.
7.
Engage in continuous professional development to stay updated with industry trends, technologies, and standards.
8.
Participate in client meetings and presentations, effectively communicating design concepts and solutions.
9.
Ensure compliance with relevant codes, regulations, and sustainability standards in all designs.
Qualifications: 1.
Bachelor’s degree in Architecture, Engineering, or a related field.
A Master’s degree will be an added advantage.
2.
MUST BE LICENSED and a minimum of 10 years of experience as an Architect.
3.
Proficiency in using Revit software for design and project management.
4.
Strong technical skills with the ability to create detailed architectural drawings and specifications
- must have experience with construction documentation.
5.
Excellent leadership skills with experience in guiding and mentoring a team.
6.
Strong communication and presentation skills, with the ability to effectively articulate design concepts and solutions to clients and team members.
7.
Comprehensive knowledge of building codes, regulations, and sustainability standards.
8.
A creative mind with a strong sense of aesthetics and a keen eye for detail.
9.
Ability to handle multiple projects simultaneously and meet deadlines.
10.
Professional registration as an Architect or Engineer is highly desirable.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Great compensation package, bonus, benefits, and more.
This Jobot Job is hosted by: Sam Stimac Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $100,000
- $145,000 per year A bit about us: An architecture firm in New York state and beyond, we are looking to add a Senior Designer/Architect with 10+ years of experience to our Albany office.
Multiple offices throughout New York, and focus in architecture, engineering, environmental, and consulting within government, institutional, healthcare, education, municipal, and more.
We are known around the east coast for the services we provide, our portfolio of work, and our staff of employees that consistently deliver.
We take pride in the work we do, the clients we engage with, and the culture we create from within.
With the current needs of our clients and new potential clients, we are growing internally.
This individual would be joining an outstanding large-scale project that will run years.
If you are looking to go to a growing company that does complex work, apply today! Why join us? Competitive compensation Medical, dental, and vision offered Bonus structure PTO (15+ days) Sick days Maternity/Paternity leave Cell phone, laptop Growth opportunity Job Details Job Details: We are looking for a Senior Designer/Architect to join our team.
This is an exciting opportunity for a highly motivated individual to apply their skills and knowledge.
We are looking for a professional who is passionate about design, architecture, and engineering, and is proficient in using Revit.
This is a permanent, full-time position that offers a competitive salary and benefits package.
Responsibilities: 1.
Lead the development of design concepts and ensure they are in line with project objectives and client needs.
2.
Collaborate with project teams to develop and refine architectural designs.
3.
Utilize Bluebeam software for design development, project management, and document control.
4.
Oversee the production of detailed drawings and specifications for construction purposes.
5.
Conduct site visits to ensure construction is in accordance with design and specifications.
6.
Provide technical guidance and mentorship to junior design staff.
7.
Engage in continuous professional development to stay updated with industry trends, technologies, and standards.
8.
Participate in client meetings and presentations, effectively communicating design concepts and solutions.
9.
Ensure compliance with relevant codes, regulations, and sustainability standards in all designs.
Qualifications: 1.
Bachelor’s degree in Architecture, Engineering, or a related field.
A Master’s degree will be an added advantage.
2.
MUST BE LICENSED and a minimum of 10 years of experience as an Architect.
3.
Proficiency in using Revit software for design and project management.
4.
Strong technical skills with the ability to create detailed architectural drawings and specifications
- must have experience with construction documentation.
5.
Excellent leadership skills with experience in guiding and mentoring a team.
6.
Strong communication and presentation skills, with the ability to effectively articulate design concepts and solutions to clients and team members.
7.
Comprehensive knowledge of building codes, regulations, and sustainability standards.
8.
A creative mind with a strong sense of aesthetics and a keen eye for detail.
9.
Ability to handle multiple projects simultaneously and meet deadlines.
10.
Professional registration as an Architect or Engineer is highly desirable.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
Project Manager, Claims Analyst - Albany NY
$100,000-125,000 Yearly Salary
Project Manager, Claims Analyst - Albany NY
US-NY-Albany
Job ID: 2025-3223
Type: Regular Full-Time
# of Openings: 1
Category: Construction Management
LiRo-Hill
Overview
We have an immediate need for a Construction Project Manager, Claims Analyst in Albany NY (Or Pearl River NY) Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. The client for this project is the NYS Office of General Services (OGS).Please provide references upon resume submission.
Responsibilities
Candidate will work in the claims department, analyzing delay claims brought against the State within a geographic region. Responsibilities include but are not limited to:• Write claim responses and contractor disputes• Oversight of the construction contract• Ensure agency policies and procedures being followed• Assess impact of delays on the project schedule and budget
• Perform review, interpret, and perform complex schedule analysis using P6.• Review Contractor’s schedule in Primavera P6 as part of claims analysis• Review project history to assist in forensic delay analysis, including meeting minutes, schedules, and correspondence.
• Monthly contractor payment review & tracking of certified payrolls
Qualifications
- Ability to manage multiple projects
- Minimum of 8 years of experience in reviewing and analyzing construction claims
- Ability to manage various projects using established controls and procedures
- Proficient with project scheduling software (preferably Oracle Primavera)
- Competitive Total Compensation PackageEmployee- Only Stock Purchase PlanMentoring programsContinuing Education ProgramEmployee referral bonusVolunteer/Industry association opportunities
- Please visit our website for all of our career opportunities at
Compensation details: 1 Yearly Salary
PI5fd4f7d98371-3631
Not Specified
jobs by
✓ All jobs loaded