Engineering Journal Jobs in Ellington, CT
25 positions found — Page 2
P
CNC Milling Machinist, 1st/2nd Shifts
✦ New
Salary not disclosed
Title
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.
Responsibilities:
- Operate vertical and horizontal multi-axis milling machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining (desired)
- Minimum of 5 Years of Machining Experience.
- Strong machine setup skills.
- Aerospace experience required.
- Ability to work with tight tolerances.
- Strong industrial math skills, required.
- Strong written and verbal skills.
- Ability to read technical drawings.
- Ability to use and setup various measuring devices.
- Strong problem-solving skills.
- Lean basic knowledge i.e. 5S, setup reduction, TPM.
- Ability to read & interpret machining program language.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Not Specified
R
Fabrication Technician III (Inspector), 3rd Shift (Onsite)
✦ New 🏢 Rtx
Salary not disclosed
Date Posted:
2026-03-04
Country:
United States of America
Location:
US-CT-WINDSOR LOCKS-B1A 1 Hamilton Rd BLDG 1A
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology.
Plan, set-up, and perform a variety of processes to maintain the flow of work to manufacture heat exchangers, water separators and other environmental control system components while practicing and complying with environmental health and safety directions and procedures.
What You Will Do:
Qualifications You Must Have:
Qualifications We Prefer:
What We Offer:
Some of our competitive benefits package includes:
Learn More & Apply Now!
We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight!
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
#TopOpps
#P&CPM
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
2026-03-04
Country:
United States of America
Location:
US-CT-WINDSOR LOCKS-B1A 1 Hamilton Rd BLDG 1A
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology.
Plan, set-up, and perform a variety of processes to maintain the flow of work to manufacture heat exchangers, water separators and other environmental control system components while practicing and complying with environmental health and safety directions and procedures.
What You Will Do:
- Plan, set-up, prepare and perform fabrication, assembly, test and associated precision fabrication processes.
- Plan, set-up and operate a variety of tools and equipment such as power presses, band saws, belt sanders, expanders, and power shears to cut, form, trim, fit, roll, bend, drill and saw material to fabricate detail parts following established methods and procedures.
- Plan, set-up, and perform resistance spot welding and salt braze processes.
- Operate a variety of conventional and CNC/NC equipment to perform milling, drilling and turning operations to established methods and procedures.
- Plan, set-up, edit programs, and operate various presses and lasers to cut and form details.
- Plan, set-up, and perform pressure, leakage and functional tests.
- Plan, set-up and operate furnaces for processes such as drying, annealing, aging and curing product.
- Receive, unload, check, record, prepare, inventory, store, disburse, and deliver a variety of materials, products and equipment.
- Maintain rough stores, cribs, gage cabinets, and point of use storage areas. Order, organize, and store such items as supplies, materials, chemicals and tools.
- Safety wire, prepare product, make and apply nameplates and package for shipment.
- Fabricate and repair containers.
- Participate in review, analysis and ordering of purchased parts and materials to ensure appropriate inventory levels. Communicate with suppliers on delivery and quality concerns.
- Review open purchasing and shop part requirements. Review regularly with internal suppliers and purchasing. Coordinate and expedite deliveries as required.
- Perform visual, dimensional and functional inspection using variable measuring instruments such as micrometers, verniers and checking fixtures.
- Mix and apply bonding agents, coatings and chemicals.
- Check calibration of gages, instruments and equipment in accordance with established procedures. Record and document as required.
- Prepare test pieces and micros using equipment such as grinders, cutters, sanders, polishers and mounting presses.
- Sharpen or modify tools, make up simple forming dies, tooling and templates.
- Perform periodic maintenance such as cleaning and lubricating fixtures and equipment, adding fluids, charging filters and tightening hardware.
- Participate in audits of processes, procedure and work areas.
- Use computers and office equipment to record and process transactions.
- Utilize and maintain all necessary documentation such as logs, reports, charts, sampling plans, statistical process control records and nonconformance documents.
- Instruct one or two fellow employees in proper performance of duties.
- Utilize statistical methods to monitor process control and capability. Use data to investigate areas for potential process improvement.
- Improve processes and solve problems in cooperation with fellow employees and technical support.
- Move parts and materials to designated locations in accordance with material flow procedures, and initiate follow-up lists.
- Keep equipment and surroundings neat, clean and organized.
- Perform related duties as required within the scope of this job function.
- 3rd Shift: 12am to 7am, Monday to Friday.
- Training may take place on 1st, 2nd Shift, or 3rd Shift for up to 3 months.
Qualifications You Must Have:
- Must have a high school diploma or GED.
- 1-2 years of experience in quality control and inspection processes.
- Prior use of air tools and fixtures to set-up parts for welding and understanding of location gages such vernier calipers and depth micrometers.
Qualifications We Prefer:
- Sheet metal working skills such as grinding, bending, cut-off tools, polishing, deburring.
- Experience completing pressure test, assembly of Heli coils, riveting, and spot welding.
- 5-7 years of relevant experience in quality control and inspection processes.
- Familiarity with statistical process control (SPC) and other quality assurance methodologies.
- Experience with the use of precision measuring instruments and inspection equipment.
What We Offer:
Some of our competitive benefits package includes:
- Medical, dental, and vision insurance
- Generous 401(k) plan that includes employer matching funds
- Collins provides eligible employees with paid time off
- Tuition reimbursement program
- Student Loan Repayment Program
- Life insurance and disability coverage
- Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
- Birth, adoption, parental leave benefits
- Ovia Health, fertility, and family planning
- Adoption Assistance
- Autism Benefit
- Employee Assistance Plan, including up to 10 free counseling sessions
- Healthy You Incentives, wellness rewards program
- Doctor on Demand, virtual doctor visits
- Bright Horizons, child and elder care services
- Teladoc Medical Experts, second opinion program
- And more!
Learn More & Apply Now!
We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight!
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
The salary range for this role $35.40 - $44.47 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
#TopOpps
#P&CPM
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Not Specified
CNC Machinist - Turning / Lathe Level II
✦ New
Salary not disclosed
Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.
This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO Package
- Paid Company Holidays
- 401K Match Program
- Medical, Dental, Vision Benefits
- Tuition Reimbursement/Assistance Program
Major Areas of Responsibility:
- Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)
- Will work with blueprints, operation sheets, and other work instructions.
- Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
- Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.
- Performs complex set-ups of own work or for others.
- Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.
- Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.
- Ensures that all manufactured parts are in full compliance to quality standards.
- Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
- Replaces all worn or damaged tooling as necessary.
- Verifies and records actual part count, both prior to and upon completion of all work
- Performs all routine maintenance on the equipment and maintains all fluid levels.
- Keeps the equipment and work area clean and organized.
- Returns excess bar stock or material to the staging area.
- Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap.
- Notifies leadperson or supervisor of any parts shortages or machining problems/difficulties.
- Packs and washes/preserves parts as needed.
- Performs other machining and assembly operations as needed.
- Performs other related duties as required.
- Interacts with associates from all departments.
Requirements:
- High School diploma or equivalent. Technical school training a plus.
- 3 years of set-up experience minimum required
- Experience with aerospace products and/or other close tolerance parts is a plus.
- Must be familiar with Fanuc and/or Okuma Controls
- Must be able to set and change tools.
- Must be able to use standard gauges and inspection techniques.
- Experience with SPC, inspection documentation, and problem solving is a plus.
- Strong interpersonal and analytical skills.
- Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
- Must be able to read CNC programs.
- Five plus years of increasingly diverse experience in a machine shop or CNC machining environment
Physical Requirements:
- Ability to push/pull/carry up to 50 lbs.
- Able to stand for up to 8+ hours.
PI203eae3637ca-26289-38787192
Not Specified
CNC Machinist - Grinding (Cylindrical/O.D.) - Level III
✦ New 🏢 HORST ENGINEERING & MANUFACTURING CO
Salary not disclosed
This Grinding Set-Up Operator/Machinist will primarily set-up and operate CNC cylindrical (O.D) grinders (e.g. Kellenberger, Studer, etc.) to produce high precision parts made from a variety of materials. In this role, you will ensure that all manufactured parts are in full compliance with quality standards and customer specifications. This role is for 1st or 2nd shift. 1st shift is 7am-3:30. 2nd shift is 3:00 - 11:30pmThis role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program
Major Areas of Responsibility:
The setup and operation of CNC cylindrical grinders (e.g. Kellenberger, Studer, Jones & Shipman, Hauser, Clausing, etc.) Working from blueprints, operation sheets, travelers or other specifications, this person sets-up and completes the machining operations to produce high precision parts.Performs complex setups including fixturing, wheel selection, and dressing, for self and others. Operates equipment as needed. Creates CNC programs on the machine and edits programs as necessary. Selects grinding wheels, tooling, gages, and other equipment as needed. Assists other Operators with setup or production problems. Ensures that all manufactured parts are in full compliance with quality standards. Uses measuring instruments and gages to perform dimensional and visual inspections on close tolerance parts.Performs all routine maintenance on the equipment. Performs other related duties as required, including centerless grinding (in-feed and thru-feed) on equipment such as Cincinnati and Royal Master grinders. Packs and cleans parts as needed.Performs other machining and assembly operations as needed.Requirements:
High School diploma or equivalent. Technical school training a plus.Five plus years of increasingly diverse experience in a machine shop or CNC machining environmentAbility to set up CNC cylindrical grinders (e.g. Kellenberger, Studer, etc.)Experience with centerless grinding (Cincinnati, Royal Master, etc.), pinch-peel grinding (e.g. Rollomatic, ANCA, etc.) is a plus.Experience with manual cylindrical grinders (e.g. Brown & Sharpe, etc.) is a plus. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.Physical Requirements:
Ability to push/pull/carry up to 50 lbs.Able to stand for up to 8+ hoursPI12f15f9a85f4-26289-39677162
Not Specified
CNC Milling Set Up Operator - Level III
✦ New 🏢 HORST ENGINEERING & MANUFACTURING CO
Salary not disclosed
Sets-up and operates CNC Milling Machines to produce highly precision component parts that meet all quality standards.This role is 100% in office at our plant in East Hartford, CT.
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program
Major Areas of Responsibility:
Set-up and operate Milling machines (Feeler, Robodrill, and Hass platforms)Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance with quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies leadperson or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments.Requirements:
- High School diploma or equivalent. Technical school training a plus.
- 3 years of set-up experience minimum required
- Experience with aerospace products and/or other close tolerance parts is a plus.
- Must be familiar with Fanuc controls.
- Must be able to set and change tools.
- Must be able to use standard gauges and inspection techniques.
- Experience with SPC, inspection documentation, and problem solving is a plus.
- Strong interpersonal and analytical skills.
- Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
- Must be able to read CNC programs.
- Five plus years of increasingly diverse experience in a machine shop or CNC machining environment
Physical Requirements:
- Ability to push/pull/carry up to 50 lbs.
- Able to stand for up to 8+ hours.
PIaf5bf2804d83-26289-39677110
Not Specified
S
Industrial Engineer
Salary not disclosed
Staff Industrial Engineer
Strativ is partnered with a disruptive aerospace company combining startup agility with deep aerospace expertise to design, build, and scale next-generation aircraft. Leveraging automation, AI-driven tools, and a fully connected digital backbone, this team is redefining how aircraft move from concept to production.
The Role
We're supporting the search for a Staff Industrial Engineer to lead advanced industrial engineering initiatives across manufacturing, R&D, and production support.
This is a senior technical role with direct influence on factory design, production readiness, capacity planning, and scalability. You'll act as the site's primary Industrial Engineering authority, partnering with operations, engineering, supply chain, and leadership.
Key Responsibilities
- Lead site-wide industrial engineering strategy, standards, and best practices
- Design and optimize manufacturing processes, layouts, material flow, and labor standards
- Develop capacity models, line balances, takt times, and production simulations
- Support new product introductions, capital projects, and factory scaling
- Drive continuous improvement using Lean, Six Sigma, and data-driven methods
- Identify constraints and reduce waste to improve throughput, quality, and cost
- Provide technical leadership and mentorship across cross-functional teams
- Own risk management, safety, and regulatory compliance programs
- Lead Process Safety Management (PSM) elements where applicable
Qualifications
- Bachelor's degree in Industrial, Manufacturing, Mechanical Engineering, or related field (Master's preferred or equivalent experience)
- 6+ years of industrial engineering experience in a manufacturing environment
- Strong Lean manufacturing, value stream mapping, and capacity planning expertise
- Experience in high-mix, low-to-medium volume production
- Proficiency in data analysis, modeling, and simulation tools
- Demonstrated ability to lead cross-functionally and build IE programs
Work Environment & Requirements
- On-site at an aerospace manufacturing and R&D facility
- ITAR-regulated
- Fast-paced, project-driven startup setting
- Must be legally authorized to work in the United States
Hiring now! Please apply to be considered.
Not Specified
F
Online Budgeting Insights Contributor
$28 per hour - monthly
We are seeking individuals to review and provide feedback on everyday money-management tips. This role focuses on common financial challenges such as managing expenses, reducing spending, and making smarter financial choices.
You will review examples of budgeting methods and evaluate practical ideas people use to stretch their income. The goal is to understand which approaches work best for real households.
The work is flexible and fully online. Applicants should have an interest in budgeting, saving money, or improving financial habits.
No formal finance background is required.
Remote working/work at home options are available for this role.
temporary
J
Senior Cost Engineer
🏢 Jobot
Salary not disclosed
Cost Estimator | Aerospace & Defense Manufacturing | RFQs, Pricing & Margin Analysis This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $105,000
- $130,000 per year A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered products for demanding aerospace and defense applications, with a strong reputation for precision, reliability, and technical excellence.
We work cross-functionally across finance, engineering, sales, and production to deliver accurate pricing, protect margins, and support long-term growth in a regulated manufacturing environment.
Why join us? Competitive Compensation: Market-aligned base salary (DOE) Stable Aerospace & Defense Business: Long-term programs and repeat customers Cross-Functional Exposure: Work closely with finance, engineering, sales, and operations Impactful Role: Direct influence on pricing strategy, margins, and new business wins Structured Schedule: Monday–Thursday 7:30am–5:00pm; every other Friday 7:30am–4:00pm Onsite Collaboration: High visibility within a tight-knit manufacturing team Job Details Key Responsibilities and Duties Develop accurate cost estimates for RFQs, proposals, price lists, strategic opportunities, and business cases Create and execute estimating plans, identifying methodologies, required data, and associated risks Perform detailed cost analyses across material, labor, overhead, and indirect costs Build and maintain standardized product costing templates Analyze material costs including inventory availability, escalation, CPI/PPI, exchange rates, and freight Understand and model direct labor and overhead rates by department and location Support pricing strategies to maximize gross margin and profitability Review monthly cost variances and recommend pricing or standard cost updates Investigate job order variances and update item masters as needed Review blueprints and specifications to determine material and process requirements Support BOM setup and cost control within the MRP/ERP system Solicit and review subcontractor and vendor quotes, including government solicitations Collaborate cross-functionally to meet departmental and company goals Maintain compliance with safety requirements when accessing the shop floor Qualifications – Needed Bachelor’s degree preferred Minimum 5+ years of cost estimating or pricing experience Minimum 5+ years in a manufacturing environment, preferably a job shop Experience with government or defense-related contracts and solicitations Strong mechanical aptitude and understanding of manufacturing processes and tooling risks Ability to read and interpret blueprints and job specifications Proficiency in math, cost analysis, and financial modeling Experience with ERP systems (Visual, Epicor, SAP); strong Excel skills required Exceptional attention to detail and ability to manage multiple priorities Confident communicator with the ability to push back when jobs are not cost-effective U.S.
Person status required under export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $105,000
- $130,000 per year A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered products for demanding aerospace and defense applications, with a strong reputation for precision, reliability, and technical excellence.
We work cross-functionally across finance, engineering, sales, and production to deliver accurate pricing, protect margins, and support long-term growth in a regulated manufacturing environment.
Why join us? Competitive Compensation: Market-aligned base salary (DOE) Stable Aerospace & Defense Business: Long-term programs and repeat customers Cross-Functional Exposure: Work closely with finance, engineering, sales, and operations Impactful Role: Direct influence on pricing strategy, margins, and new business wins Structured Schedule: Monday–Thursday 7:30am–5:00pm; every other Friday 7:30am–4:00pm Onsite Collaboration: High visibility within a tight-knit manufacturing team Job Details Key Responsibilities and Duties Develop accurate cost estimates for RFQs, proposals, price lists, strategic opportunities, and business cases Create and execute estimating plans, identifying methodologies, required data, and associated risks Perform detailed cost analyses across material, labor, overhead, and indirect costs Build and maintain standardized product costing templates Analyze material costs including inventory availability, escalation, CPI/PPI, exchange rates, and freight Understand and model direct labor and overhead rates by department and location Support pricing strategies to maximize gross margin and profitability Review monthly cost variances and recommend pricing or standard cost updates Investigate job order variances and update item masters as needed Review blueprints and specifications to determine material and process requirements Support BOM setup and cost control within the MRP/ERP system Solicit and review subcontractor and vendor quotes, including government solicitations Collaborate cross-functionally to meet departmental and company goals Maintain compliance with safety requirements when accessing the shop floor Qualifications – Needed Bachelor’s degree preferred Minimum 5+ years of cost estimating or pricing experience Minimum 5+ years in a manufacturing environment, preferably a job shop Experience with government or defense-related contracts and solicitations Strong mechanical aptitude and understanding of manufacturing processes and tooling risks Ability to read and interpret blueprints and job specifications Proficiency in math, cost analysis, and financial modeling Experience with ERP systems (Visual, Epicor, SAP); strong Excel skills required Exceptional attention to detail and ability to manage multiple priorities Confident communicator with the ability to push back when jobs are not cost-effective U.S.
Person status required under export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Production Planner
🏢 Jobot
Salary not disclosed
Production Planner Needed for Innovative and Growing Aerospace Engineering and Manufacturing Company This Jobot Job is hosted by: Billy Surch Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $70,000
- $100,000 per year A bit about us: A leading manufacturer of complex aerospace components and critical safety components for military and commercial aircrafts.
Our reputation has been built on providing quality aerospace parts and exceptional customer support to the aviation industry.
Why join us? • Competitive base salary and overall compensation package • Full benefits: Medical, Dental, Vision • Generous PTO, vacation, sick, and holidays • Life Insurance coverage • 401 (K) with generous company match Job Details Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
Review MPS/MRP and customer’s online portals for demand forecast while maintaining Min/Max levels.
Review material and outside vendor (OSV) processing requirements.
Create, release and maintain material requisitions and jobs to meet customer demand.
Submit and track status of Material and OSV requisitions; confirm PO creation.
Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $100,000 per year A bit about us: A leading manufacturer of complex aerospace components and critical safety components for military and commercial aircrafts.
Our reputation has been built on providing quality aerospace parts and exceptional customer support to the aviation industry.
Why join us? • Competitive base salary and overall compensation package • Full benefits: Medical, Dental, Vision • Generous PTO, vacation, sick, and holidays • Life Insurance coverage • 401 (K) with generous company match Job Details Monitor MRP signals (Material buys, job release dates, overdue/exception notices).
Review MPS/MRP and customer’s online portals for demand forecast while maintaining Min/Max levels.
Review material and outside vendor (OSV) processing requirements.
Create, release and maintain material requisitions and jobs to meet customer demand.
Submit and track status of Material and OSV requisitions; confirm PO creation.
Create and release work orders; maintain work order accuracy (Engineering Changes (ECs), process changes, reprints, etc.).
Coordinate with production, engineering, sales, purchasing & shipping/receiving to expedite the flow of work orders.
Monitor and take immediate reschedule action in case of customer demand changes (push-out or pull-ins).
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
J
Senior CNC Programmer
🏢 Jobot
Salary not disclosed
Senior CNC Programmer | 4 & 5-Axis | Automation & Pallet Systems This Jobot Job is hosted by: Jamie Beene Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $38
- $50 per hour A bit about us: Founded nearly a century ago and based in South Windsor, Connecticut, we design and manufacture highly engineered components for aerospace and mission-critical applications, with additional operations across multiple U.S.
locations.
We are a precision-driven manufacturing organization where advanced machining, automation, and continuous improvement are core to how we operate.
Our teams work closely across engineering, operations, and production to deliver high-quality parts in a safety-focused, collaborative environment.
Why join us? Competitive Compensation: Hourly rate based on experience, with annual discretionary bonus eligibility Comprehensive Benefits: Medical, Dental, Vision, HSA/FSA, Life Insurance Retirement: 401(k) with company contribution Work-Life Balance: Monday–Thursday schedule with every other Friday off early High-Impact Role: Own programming strategy across advanced CNC equipment Modern Manufacturing: Automation, pallet changers, horizontal machining centers Stable, Growing Organization: Long-standing manufacturer with strong market demand Onsite Collaboration: Direct interaction with machinists, operators, and leadership Job Details Key Responsibilities and Duties: Program CNC turning and milling centers based on engineering drawings and specifications Create 3D models from drawings using Mastercam Develop efficient sequences of operations and optimal fixturing strategies Select and optimize tooling, cutters, and holders for quality and cycle time improvement Manage CNC program configuration control and revision accuracy Improve existing programs to enhance efficiency, quality, and throughput Communicate directly with machinists and operators on setup and program effectiveness Deploy CNC programs through the Visual ERP work order system Support cost estimating with setup and machining time estimates Generate work instructions and process sheets for operators Assist operators during setup and troubleshooting as needed Maintain accurate job records and documentation Follow all safety rules, PPE requirements, and housekeeping standards Collaborate cross-functionally to meet department and company goals Qualifications Needed: High School Diploma or equivalent Minimum 5 years of CNC programming experience Strong experience programming CNC lathes and milling machines Required: 4-Axis programming experience Preferred: 5-Axis programming experience Experience with machine automation and pallet changing systems Background with horizontal machining centers Proven fixture design and implementation experience Strong tooling knowledge and optimization skills Ability to program and support multiple machines simultaneously Ability to work independently with minimal supervision Strong communication, teamwork, and problem-solving skills U.S.
Person status required per export control regulations Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Not Specified
jobs by
✓ All jobs loaded