Engineering Journal Jobs in East Windsor
38 positions found — Page 2
Quality Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.
Essential Duties & Responsibilities:
Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.
- Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
- Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
- Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
- Strong understanding of units of measure and applicability to GD&T principles
- Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
- Strong professional ethics combined with the ability to function well on teams.
Position Requirements
- Experience in aerospace manufacturing or similarly regulated industry preferred.
- Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
- High School Diploma or GED
- Knowledgeable of MS Word, and Excel
- Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
- Familiarity with operation/programming of FARO arm preferred
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Quality Control
Req Number
QUA-25-00017
Position
Quality Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
LEAN Specialist
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.
Key Responsibilities
- Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
- Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
- Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
- Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
- Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
- Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
Key Skills & Qualifications
- Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
- Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
- Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
- Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
- Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
- Facilitation: Ability to lead workshops and brainstorming sessions effectively.
Education & Experience Requirements
- Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
- Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
- Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-26-00010
Position
LEAN Specialist
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
TruGreen accepts applications on an ongoing basis.
Job DescriptionTruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
Responsible for accurately documenting all repairs in an electronic maintenance management system.
Maintain parts inventory and work area in clean and orderly fashion.
Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
Develops and executes preventative maintenance programs.
Prepares and manages maintenance budget.
Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
Ability to operate independently and collaboratively within a team.
Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Attention to detail.
Verbal and written communication skills.
Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
Sit, stand and walk
Use hands and arms to handle, feel or reach
Speak and hear
Use close vision abilities
Operate a vehicle with a valid drivers license
Occasionally required to:
Lift or move up to 50 lbs
Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
Low to moderate
Adverse Conditions
Minimal
Ability to speak, read and write fluently in English is required.
You MUST BE physically located in the United States while performing this job.
TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.
Pay Ranges $42,002.00 - $75,602.00This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.
TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.To view our disclaimer,
TruGreen accepts applications on an ongoing basis.
Job Description
TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
- Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
- Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
- Responsible for accurately documenting all repairs in an electronic maintenance management system.
- Maintain parts inventory and work area in clean and orderly fashion.
- Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
- Develops and executes preventative maintenance programs.
- Prepares and manages maintenance budget.
- Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
- High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
- Ability to operate independently and collaboratively within a team.
- Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
- Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
- Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Attention to detail.
- Verbal and written communication skills.
- Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
- Sit, stand and walk
- Use hands and arms to handle, feel or reach
- Speak and hear
- Use close vision abilities
- Operate a vehicle with a valid drivers license
Occasionally required to:
- Lift or move up to 50 lbs
- Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
- Low to moderate
Adverse Conditions- Minimal
Pay Ranges
$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.TruGreen accepts applications on an ongoing basis.
Job Description
TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"
Position Overview
Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.
Responsibilities
- Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
- Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
- Responsible for accurately documenting all repairs in an electronic maintenance management system.
- Maintain parts inventory and work area in clean and orderly fashion.
- Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
- Develops and executes preventative maintenance programs.
- Prepares and manages maintenance budget.
- Responds to vehicle and equipment breakdowns in field as needed/required.
Education and Experience Requirements
- High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience
Knowledge, Skills, and Abilities
- Ability to operate independently and collaboratively within a team.
- Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
- Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
- Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Attention to detail.
- Verbal and written communication skills.
- Time management and organizational skills, including punctuality for on-time attendance.
Physical Demands & Working Conditions
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Regularly required to:
- Sit, stand and walk
- Use hands and arms to handle, feel or reach
- Speak and hear
- Use close vision abilities
- Operate a vehicle with a valid drivers license
Occasionally required to:
- Lift or move up to 50 lbs
- Stoop, kneel, crouch or crawl
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Noise level
- Low to moderate
Adverse Conditions- Minimal
Pay Ranges
$42,002.00 - $75,602.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen ( ).
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.
Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
TruGreen performs pre-employment testing.Final Inspection Apprentice
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Position Requirements
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00034
Position
Final Inspection Apprentice
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Deburring Operator
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.
Essential Duties & Responsibilities:
- Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
- Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
- Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
- Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
- Performs other work as assigned by the supervisor.
Position Requirements
- Ability to lift or transfer components or objects of no more than 50 pounds.
- Understand and follow written and oral instructions in English and possess basic mathematical skills.
- Ability to read and interpret blueprints and assist in tooling and process development.
- Considerable ability to use a variety of hand and pneumatic tools.
- Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
- Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
- Proficiently interacts with other employees and possess good interpersonal skills.
Education & Experience Required:
- High School diploma or GED
- 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.
Working Conditions:
Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.
EOE Statement:
PCX Aerosystems is an equal opportunity employer.
Shift
First
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Enfield
Category
Manufacturing
Req Number
MAN-25-00018
Position
DEBURRING OPERATOR
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.
Responsibilities:
- Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
- Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
- Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining or two years of CNC experience.
- Aerospace experience preferred.
- Basic understanding of math or industrial mathematics.
- Good written and verbal skills.
- Basic computer skills.
- Ability to read technical drawings.
- Ability to set, use or setup various measuring devices.
- Solid problem solving skills.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Final Inspector
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.
Responsibilities:
- Review all raw material and processing certifications IAW Customer and PO requirements.
- Utilize Material Release database to document quality review/activities.
- Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
- Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
- Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
- Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
- Perform tasks as assigned by Supervisor and/or Team Leader.
Position Requirements
Physical Requirements:
- Ability to lift 50 lbs.
- Ability to stand or sit for extended period of time.
- Fine motor skills with frequent hand and arm movement.
- Frequent twisting and bending.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
Qualifications - Required
- US Citizen
- High School Diploma or equivalent
- Minimum of 1 Year of Aerospace Inspection Experience
- Familiar with ISO / AS9100 requirements and/or Auditing Skills
- Basic math or industrial mathematics desired.
- Good written and verbal skills
- Basic computer skills
- Strong attention to detail and accuracy
- Strong problem-solving skills required
- Strong organizational skills required
Shift
Days
Full-Time/Part-Time
-unspecified-
Location
Applied Aerospace & Defense, Manchester
Category
Quality Control
Req Number
QUA-25-00032
Position
Final Inspector
Close Date
Post Internal Days
0
Number of Openings
1
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.
Responsibilities:
- Operate vertical and horizontal multi-axis milling machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining (desired)
- Minimum of 5 Years of Machining Experience.
- Strong machine setup skills.
- Aerospace experience required.
- Ability to work with tight tolerances.
- Strong industrial math skills, required.
- Strong written and verbal skills.
- Ability to read technical drawings.
- Ability to use and setup various measuring devices.
- Strong problem-solving skills.
- Lean basic knowledge i.e. 5S, setup reduction, TPM.
- Ability to read & interpret machining program language.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
