Engineering Jobs in East Windsor

Plans and designs manufacturing processes throughout the plant. This position maximizes efficiency by analyzing all aspects of manufacturing processes. Determines parts and tools needed to achieve product specifications and business objectives.

Essential Duties & Responsibilities:

Under general direction, performs the management of projects related to aerospace component engineering and manufacturing for new and existing parts and assemblies. Establishes manufacturing methods and process sequence necessary to complete parts. Creates models, operation sheets and work instructions using Solidworks software. Initiates Tool & Fixture design concepts and maintains close feedback with other shop floor personnel, management and related customers and vendors. Troubleshoots manufacturing problems and implements method and tool improvements. Writes rework and repair methods for non-conformances and prepares projects timelines. Participates in discussions with customers and suppliers as required. Performs additional duties as requested, including cost estimating.

Required Knowledge, Skills, & Abilities:

• 
  
• Reads and interprets blueprints, symbols and geometric tolerances based on military and commercial specifications.
  
• Able to process complex assemblies and conceptualize developmental and production tooling in a job shop environment.
  
• Proficient with the following software applications: Solidworks (or equivalent), MS Project / Word / Excel.
  
• Able to create Solid models, operations sheets, Tool and Fixture designs.
  
• Familiarity with specifications and requirements for aerospace component manufacturing that includes having knowledge of aerospace coatings, heat treatment, and machining specifications.
  
• Strong math background including trigonometry and geometry.
  
• Able to research, understand and implement new technologies for possible cost savings and process improvements.
  
• Good verbal and written communication skills and the ability to work well with others in a team-based environment.
  
• Able to perform hands-on shop work.
  
• Proficient in project management.
  

Working Conditions:

Normal office working conditions with the absence of disagreeable elements. Manufacturing Engineers spend a good amount of time on the shop floor.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

Education & Experience Required:

• High School Diploma or equivalent and 3-5 years' experience in an aerospace manufacturing environment.
• Prior experience to range from engineering to expediting on shop floor utilizing detailed team input for instruction/directions.
• AS/BS in Engineering Science is advantageous.

This position is currently accepting applications.

Apply Now

The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.

Responsibilities:

• 
  
• Operate vertical and horizontal multi-axis milling machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining (desired)
  
• Minimum of 5 Years of Machining Experience.
  
• Strong machine setup skills.
  
• Aerospace experience required.
  
• Ability to work with tight tolerances.
  
• Strong industrial math skills, required.
  
• Strong written and verbal skills.
  
• Ability to read technical drawings.
  
• Ability to use and setup various measuring devices.
  
• Strong problem-solving skills.
  
• Lean basic knowledge i.e. 5S, setup reduction, TPM.
  
• Ability to read & interpret machining program language.
  

This position is currently accepting applications.

Apply Now

Title: New Product Introduction Engineer

Job Summary:

The incumbent will be responsible for project management from development through production launch for new products.

Supervisory Responsibilities: None

Duties/Responsibilities:

• Collaborate with customers, marketing, sales, manufacturing, engineering, and quality engineering to shepherd new programs from concept development to commercial launch.
• Position serves in a results-driven environment and requires a team-oriented individual.
• Develop project and manufacturing costs to support sales and marketing in business case development and program justification.
• Ability to understand customer requirements and translate those requirements into a manufacturable product design.
• Establish engineering / scientific objectives for projects.
• Coordinate tooling design, fabrication, start-up, and production ramp-up then turn over to manufacturing for new programs.
• Finalize specifications, designs, and contract reviews for specific market responsibilities.
• Ability to manage multiple projects at one time to agreed timelines and budgets.
• Independently plan and execute projects – i.e., program management
• Evaluated based on execution to the project timeline.
• Evaluated based on customer satisfaction.
• Evaluated on the successful launch of products to production.

The expectations for managing the programs are:

• Manage the phase gate process from purchase order receipt, through development and production release.
• Assemble a multi-disciplinary team (assigned by department managers) to execute project activities.
• Hold a kick-off meeting to launch the project.
• Create and maintain a project Gantt chart for schedule and critical deliverables.
• Hold review meetings as programs progress towards production.
• Participate in technical meetings.
• Manage customer meetings.
• Manage suppliers in the development phase.
• Generate presentations on project status.
• Mange the hand off of a project to production and the production sign-off of a project
• Participate with the team in a “hands on” manner: assist in writing / review of documents, assist with taking product samples, machine operation, manufacturing process review, and physical review of product quality.

Required Skills/Abilities:

• 3+ years of experience in manufacturing, product realization, or an applied industrial environment.
• Experience with automotive, aerospace, or medical manufacturing and quality systems desired. Proficiency in reading engineering prints along with an understanding of geometric dimensioning and tolerancing (GD&T).
• Skilled in utilizing spreadsheets for calculations, task management, and documentation.
• Manage team priorities and open tasks.
• Able to lead team meetings.

Experience & Education Requirements:

Bachelor of Science in Engineering or ten years of experience in manufacturing and program management.

Physical Requirements:

• Prolonged periods of sitting at a desk and working on a computer.
• Must be able to lift 15 pounds at times.
• Must be able to access and navigate each department at the organization’s facilities.

The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

This position is currently accepting applications.

Apply Now

Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.

Essential Duties & Responsibilities:

• 
  
• Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
  
• Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
  
• Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
  
• Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
  
• Performs other work as assigned by the supervisor.
  

• Ability to lift or transfer components or objects of no more than 50 pounds.
• Understand and follow written and oral instructions in English and possess basic mathematical skills.
• Ability to read and interpret blueprints and assist in tooling and process development.
• Considerable ability to use a variety of hand and pneumatic tools.
• Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
• Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
• Proficiently interacts with other employees and possess good interpersonal skills.

Education & Experience Required:

• High School diploma or GED
• 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.

Working Conditions:

Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

This position is currently accepting applications.

Apply Now

In the aerospace industry, a Program Manager serves as the central bridge between design engineering and full-scale manufacturing. This role is high impact, requiring a strategic thinker who can navigate complex technical requirements and rigorous regulatory standards to ensure products are optimized for both scalability and efficiency.

Core Responsibilities

• 
  
• Project Lifecycle Leadership: Own the execution of new products from initial design handoff through prototyping, pilot builds, and final transition to production.
  
• Cross-Functional Coordination: Lead integrated teams across engineering, supply chain, quality, and finance to ensure alignment of program goals.
  
• Resource & Budget Management: Work with cross functional groups to develop end-to-end manufacturing plans, including detailed schedules, resource allocation, and budget oversight to maintain project costs within 5-10% of estimates.
  
• Risk & Change Mitigation: Proactively identify delivery risks, manage engineering changes through disciplined configuration control, and develop contingency plans for roadblocks.
  
• Operational Readiness: Ensure manufacturing systems, tooling, and supply chains are ready for high-volume production, including making critical "make/buy" decisions.
  
• Stakeholder Management: Act as the primary point of contact for customers, providing regular status updates on milestones, KPIs, and delivery performance.
  

Required Qualifications

• 
  
• Education: A Bachelor's degree in Engineering (Mechanical, Industrial, or Aerospace), Business Management, or Operations Management is typically required.
  
• Experience: At least 3-7 years of experience in aerospace manufacturing or a similar fast-paced engineering environment.
  
• Certifications: PMP (Project Management Professional) certification is frequently preferred or required to demonstrate formal methodology expertise.
  
• Technical Proficiency: Deep understanding of manufacturing processes (e.g., precision machining, assembly), ERP/MRP systems, and product lifecycle management (PLM) tools.
  
• Regulatory Knowledge: Familiarity with Aerospace Quality & Compliance standards (such as AS9100 or FAA regulations) is often essential.
  

Key Performance Indicators (KPIs)

Aerospace NPI managers are often measured by their ability to:

• 
  
• Consistently meet Contract Ship Dates for complex projects.
  
• Achieve On-Time Delivery (OTD) and milestone completion targets.
  
• Maintain high Quality Standards and production yields during the ramp-up phase.
  

This position is currently accepting applications.

Apply Now

The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.

Key Responsibilities

• 
  
• Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
  
• Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
  
• Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
  
• Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
  
• Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
  
• Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
  
  

Key Skills & Qualifications

• 
  
• Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
  
• Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
  
• Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
  
• Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
  
• Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
  
• Facilitation: Ability to lead workshops and brainstorming sessions effectively.
  

Education & Experience Requirements

• 
  
• Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
  
• Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
  
• Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
  

This position is currently accepting applications.

Apply Now

This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.

Responsibilities:

• 
  
• Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  
• Unusual Environmental Conditions:
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  
• Required Personal Protective Equipment:
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining or two years of CNC experience.
  
• Aerospace experience preferred.
  
• Basic understanding of math or industrial mathematics.
  
• Good written and verbal skills.
  
• Basic computer skills.
  
• Ability to read technical drawings.
  
• Ability to set, use or setup various measuring devices.
  
• Solid problem solving skills.
  

This position is currently accepting applications.

Apply Now

The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

This position is currently accepting applications.

Apply Now

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

Accountability:

Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.

Essential Functions and Duties:

• 
  
• Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
  
• Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
  
• Analyze engineering drawings for materials, process fabrication and design elements.
  
• Specify patterns on programming sheet for way part is to be machined.
  
• Assure program meets target cycle time and program generates geometry to customer requirements.
  
• Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
  
• Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
  
• Support lean activities both within the Engineering group and across the organization.
  

Complexity of Tasks:

Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.

Qualifications:

• 
  
• Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
  
• Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
  
• Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
  
• 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
  
• CAD/CAM software: Siemens NX and MasterCam required
  
• Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
  
• CG Tech Vericut experience required.
  
• Capable of debugging programs and working closely with shop floor and inspection personnel.
  
• Some tool design experience preferred.
  
• Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
  
• Must be a team player and have the ability to work closely in a shop environment.
  
• Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
  
• Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
  

This position is currently accepting applications.

Apply Now

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

Hiring: Production Quality Inspector

Manchester, CT | Aerospace Manufacturing

The aerospace industry is at a turning point, and our client is breaking the mold. They are a next-generation manufacturer combining startup speed with deep industry expertise, using automation, AI-driven tools, and a fully connected digital backbone to reinvent how flight-critical components are built and scaled.

They're looking for a Production Quality Inspector to ensure that quality isn't just a checkpoint, but something built into every part they ship.

What You’ll Do

• Full-Lifecycle Inspection: Own visual, dimensional, and physical inspections across the production journey—including in-process, first-piece, and final.
• Blueprint & Technical Validation: Interpret complex engineering drawings and GD&T specifications to ensure every part meets tight design tolerances.
• AS9102 First Articles: Lead and document First Article Inspections (FAI) to validate that initial production runs meet all customer and regulatory specs.
• Advanced Measurement: Utilize a high-precision toolkit including CMMs, borescopes, micrometers, height gauges, and calipers.
• Documentation & NCRs: Maintain impeccable traceability records (Logs, CoCs) and partner with Quality Engineering to identify and resolve nonconformances (NCRs).
• Audit Support: Support internal and external QMS audits for compliance with AS9100 and regulatory standards.

What You’ll Bring

• 3+ years of Quality Inspection experience specifically within an aerospace manufacturing environment.
• Technical Expertise: Strong proficiency in GD&T and expertise in reading/interpreting aerospace blueprints.
• Compliance Knowledge: Deep familiarity with AS9100 standards and FAA regulations; an active A&P License or Repairman Certificate is preferred.
• Software Fluency: Experience with ERP systems (SAP, Epicor) and/or CATIA/CAD tools.
• Precision Focus: Ability to pass visual acuity/color discrimination exams and thrive in a fast-paced factory setting.

Role Details

• Growth: Work alongside elite innovators to shape the future of autonomous and scalable aviation.
• Package: Competitive hourly rate, Full Benefits (Medical, Dental, Vision, 401k).

TruGreen accepts applications on an ongoing basis.

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.

• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).

• Responsible for accurately documenting all repairs in an electronic maintenance management system.

• Maintain parts inventory and work area in clean and orderly fashion.

• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.

• Develops and executes preventative maintenance programs.

• Prepares and manages maintenance budget.

• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.

• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).

• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.

• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.

• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

• Attention to detail.

• Verbal and written communication skills.

• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk

• Use hands and arms to handle, feel or reach

• Speak and hear

• Use close vision abilities

• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs

• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

 

Noise level

• Low to moderate
  
   

Adverse Conditions

• Minimal

Ability to speak, read and write fluently in English is required.

You MUST BE physically located in the United States while performing this job.

TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.

TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).

 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.