Engineering Journal Jobs in Ct

POSITION OVERVIEW: The Town of Westport seeks an experienced and collaborative leader to serve as Director of Public Works. Reporting to the First Selectman, the Director oversees a multi-division department responsible for the Town’s core infrastructure, including Highway, Equipment Maintenance, Solid Waste Management, Engineering, Wastewater Treatment and Collection, and Buildings and Facilities. The Director supervises division heads and senior technical staff and provides strategic direction across operations, capital planning, and emergency response.

The successful candidate will demonstrate sound judgment, fiscal discipline, and inclusive leadership, along with the ability to build trust across departments and with elected officials, staff, contractors and residents. The Town of Westport values candidates who approach the role with professionalism, integrity, and a clear commitment to serving the community.

RESPONSIBILITIES:

•Oversees and directs all Public Works operations, including engineering and design, construction and maintenance of roads, bridges, wastewater systems, solid waste and recycling, fleet, and Town buildings and facilities.

•Prepares, administers, and presents the departmental operating budget and capital plans, and provides reports to Town leadership, boards, and commissions.

•Manages bid specifications, consultant and contractor selection, and contract administration for capital and operational projects.

•Provides technical guidance to Town departments on infrastructure planning, construction, and maintenance, and prepares cost estimates and capital project recommendations.

•Directs departmental response during emergencies and is a critical member of the Town’s Emergency Operations Center.

•Manages department staffing, including policy development, training, performance, and personnel actions in coordination with Human Resources and the First Selectman.

•Serves as liaison with federal, state, and local agencies.

•Oversees energy conservation and sustainability initiatives, GIS and mapping, grant preparation and administration, and investigation of citizen and staff concerns.

QUALIFICATIONS:

•Bachelor’s degree in engineering, public administration, construction, or a related field; Master’s degree desirable.

•Over ten years of progressively responsible experience in multifunctional organizations, preferably in the public sector and managing construction-related projects. Experience must include at least four years supervising a major department function.

•Any equivalent combination of education, training, and experience.

•Licensure as a Professional Engineer and/or Land Surveyor a plus.

• Perform complex welding repairs on aerospace components in accordance with approved repair procedures, work instructions, and customer specifications.
• Execute welding processes such as TIG (GTAW) and other applicable methods on aerospace alloys (e.g., nickel-based alloys, stainless steel, aluminum, titanium).
• Interpret engineering drawings, weld symbols, repair manuals, and technical instructions.
• Restore components to serviceable condition while maintaining dimensional integrity and material properties.

• Ensure all welding and repair activities comply with AS9100, FAA/EASA requirements (as applicable), and internal quality procedures.
• Complete required documentation accurately, including travelers, repair records, and inspection sign-offs.
• Support internal, customer, and regulatory audits.
• Work closely with Quality and Engineering to resolve nonconformances and repair challenges.

• Perform in-process inspections and visual weld inspections per applicable standards.
• Support NDT processes (e.g., FPI) before and after welding repairs.
• Maintain welding equipment, tooling, and fixtures in proper working condition.
• Identify opportunities to improve repair methods and reduce rework.

• Serve as a technical resource and mentor the MRO team members.
• Assist with training, qualification, and skill development of welding personnel.
• Provide input on process improvements, tooling needs, and repair development.

• HS Diploma or equivalent, technical certification in welding.
• 7+ years' of welding experience in an aerospace manufacturing or MRO environment.
• Demonstrated expertise in TIG welding for aerospace applications.
• Ability to read and interpret complex engineering drawings and weld symbols.
• Strong understanding of aerospace quality and repair requirements.
• Excellent attention to detail and workmanship.
• FAA Repairman Certification.
• Commitment to safety, quality, delivery, and customer service.

• Primary duties will be on the shop floor, working in a manufacturing environment.
• Must be able to stand for extended periods of time while performing manual work.
• Good hand-eye coordination and manual dexterity in both hands.
• Must be able to lift up to 35 pounds unassisted, stand, squat, bend, twist, and reach often.
• Exposure to various temperatures, noise and vibration from power equipment, dust, and fumes.

Location: Middlefield, CT, US, 06455

The Division Vice President, Business Unit Manager (DVP, BU Manager) will be responsible for overall profit and loss performance and leading and driving growth of the Zygo business unit. They will work to thoroughly understand the business, take a hands-on approach, lead the business unit teams across multiple geographies, and be responsible for developing and implementing the Business Unit's Strategic Plan with an emphasis on AMETEK's culture and four-pronged growth strategy promoting continuous improvement, new product development, global and market expansion, and mergers & acquisitions.

Responsibilities:

• Develop the annual operating plan and meet financial commitments, including meeting or exceeding revenue, profitability and return-on-asset targets.
• Drive annual revenue growth organically while achieving growth through M&A activity.
• Develop and execute a strong growth strategy including market expansion, new product development/launch and acquisitions.
• Develop and lead a world-class operating culture and have a measurable impact on the success and growth of the overall organization. Provide strong process-driven leadership.
• Develop and articulate the annual strategic plan along with the action plans that support the execution of this strategy.
• Responsible for operating performance, e.g. sales, profit, working capital, on-time delivery, planning, scheduling, materials management, etc. Provide direct management to site and functional leaders.
• Improve the product development and launch process by developing strong product maps, shortening the current development cycle, and emphasizing NPD as a percentage of sales.
• Ensure effective product management to assist in driving market expansion.
• Utilize the current product portfolio as well as R&D plans to help drive growth.
• Develop strong product roadmaps, proactively tracing the paths of development for new applications and existing product movements in the marketplace.
• Practice strategic product management, planning the development and life cycles of all products through production.
• Develop an acquisition strategy including studying and building business cases for new investment opportunities that will create competitive advantages.
• Analyze market positioning of the various players operating in the sector for the purpose of benchmarking and identifying future business opportunities.
• Develop talent and maximize human capital including assessing the current team, identifying those with potential, providing opportunities to grow professionally, and building a succession plan for the business.

Requirements:

• 15+ years of progressive management experience and 5+ years in a senior leadership role with full P&L responsibility and full cross-functional responsibility including finance, engineering, quality, manufacturing operations, marketing/sales and human resources.
• Bachelor's degree required, a BSEE or BSME preferred. An MBA is strongly preferred.
• The ideal candidate will have managed a business with revenues of at least $100M with global experience highly preferred.
• A proven track record serving in multiple functional roles which could include engineering, operations, sales and/or marketing.
• Familiarity with the manufacturing of engineered products required.
• Candidates must have proven strategic planning skills, conducted competitive analysis, developed marketing plans, pricing strategies, etc. Experience evaluating and making acquisitions is strongly preferred.
• Proven track record of improving operational excellence (Lean, Six Sigma, Kaizen, CI and JIT), and operating metrics (OTD, operating profit margin, reducing working capital. etc.).
• Hands-on involvement in customer relationships in applicable markets; the knowledge and confidence to interact with customers and speak articulately about the products.
• Strong financial acumen and experience working for a publicly traded or Private Equity owned company continuously driven to lower costs while improving performance.
• Effective strategic leadership skills and executive attributes; the ability to foster, formulate and execute business strategies that deliver profitable growth.
• Strong analytical thinking, problem solving, and communications skills (both written and oral) with attention to detail.
• Ability to effectively communicate ideas and establish credibility to people at all levels of the organization.
• Must be self-directed and able to work well under pressure, multi-task, and meet deadlines.
• Must be a team player with excellent interpersonal skills and a commitment to relationship-building, both internally and externally; isn't afraid to roll up their sleeves.

Compensation: Salaried. Salary Minimum: $200,000+. Salary Maximum: $200,000+. Incentive: Yes.

AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.

AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Nearest Major Market: Hartford

Job Details:

Process Engineer

• Type: Full-Time, Direct Hire

• Location: West Haven, CT

• Salary: $87,000 – $103,000 (DOE)

• Schedule: Day shift

• Benefits: Full benefits package including Medical, Dental, Vision, 401(k), and PTO

We are currently seeking a Process Engineer to support and lead high-volume assembly operations with a strong emphasis on process optimization, automation, and Lean manufacturing. This role plays a key part in driving operational excellence across safety, quality, delivery, and cost.

Position Summary and Key Responsibilities:

As a Process Engineer, your day-to-day responsibilities will include, but are not limited to:

Core Responsibilities:

• Develop, optimize, and sustain assembly processes aligned with quality, productivity, and cost targets

• Identify and implement automation opportunities including robotics, vision systems, and material handling solutions

• Lead continuous improvement initiatives using Lean tools such as Kaizen, 5S, Standard Work, SMED, and Value Stream Mapping

• Partner cross-functionally with Design, Quality, Maintenance, and Operations to launch new products and processes into production

• Analyze manufacturing KPIs (cycle time, OEE, scrap, downtime) and drive corrective actions

• Apply structured problem-solving methodologies (DMAIC, 8D, PDCA, Root Cause Analysis) to resolve process issues

• Develop and maintain process documentation including work instructions, PFMEAs, control plans, and process flow diagrams

• Evaluate new equipment and technologies; build business cases and support capital projects from concept through implementation

• Champion Lean culture by training, mentoring, and engaging team members at all levels

• Ensure compliance with safety, quality, and environmental standards across all process engineering activities

Qualifications / Requirements:

Required:

• Bachelor’s degree in Mechanical, Industrial, Manufacturing Engineering, or related field

• 7+ years of experience in process or manufacturing engineering within a high-volume assembly environment

• Proven experience with automation integration and Lean manufacturing principles

• Strong knowledge of assembly tooling, fixtures, and workstation design

• Proficiency with AutoCAD and/or SolidWorks

• Advanced Excel skills and experience with statistical analysis tools (Minitab or similar)

• Solid understanding of manufacturing KPIs, Six Sigma fundamentals, and process validation

• Strong project management, communication, and leadership skills

Preferred:

• Six Sigma Green Belt or Black Belt certification

• Experience with PLCs, robotics, vision systems, or MES platforms

• Exposure to multi-site or cross-cultural manufacturing environments

Work Environment:

This role operates within a fast-paced manufacturing and assembly environment and requires regular presence on the production floor. Strict adherence to safety and quality standards is expected.

Company Overview:

Founded in 2010, Top Prospect Group was built on delivering high-quality talent to leading organizations. In 2023, the company was acquired by HW Staffing Solutions, expanding its reach across manufacturing, technology, and professional services nationwide.

Qualified candidates are encouraged to apply immediately.

Please include a clean copy of your resume, salary expectations, and any references.

Title: Sr. Manufacturing Engineer (NPI)

Location: Greater Bethel Area, CT (100% Onsite)

Employment Type: Direct Hire

Status: Accepting Candidates

About the role

Seeking a Senior Manufacturing Engineer to support New Product Introduction (NPI) initiatives within a regulated medical device manufacturing environment. This role focuses on engineering scalable manufacturing processes, supporting product launches, and leading validation activities to ensure production readiness.

Key Responsibilities

• Serve as Manufacturing Engineering lead on NPI programs from concept through production transfer.
• Design and optimize scalable manufacturing processes, tooling, and fixtures.
• Program and troubleshoot CNC machining operations (Milling, Multi-Axis, Wire EDM).
• Lead IQ/OQ/PQ validation, TMV studies, and equipment commissioning activities.
• Create and maintain manufacturing documentation in compliance with ISO 13485 and internal QMS.
• Drive continuous improvement initiatives to enhance quality, safety, and efficiency.

Qualifications

• 5+ years of Manufacturing Engineering experience (flexible to 3–4 years).
• Hands-on experience with IQ/OQ/PQ validation in regulated manufacturing.
• Strong exposure to CNC programming (G-code/M-code preferred).
• Experience supporting high-volume manufacturing processes.
• Knowledge of ISO 13485 and structured QMS environments.
• Must be able to work onsite 100%.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Knows, understands, incorporates, and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users and Clinical Engineering Management of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost-effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) or more years' experience performing corrective and planned maintenance on medical devices and/or clinical equipment.

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and test equipment specific to the field.  Ability to train CE associates on use and application of test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must be able to adapt to frequently changing work priorities.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes.

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.