Engineering Journal Jobs in Alief, TX

* This role requires heavy travel.

Summary:

Electrical background with direct experience in transmission and/or substation construction. Working knowledge of high-voltage systems, switching, grounding, and clearance requirements. Familiarity with energized vs. de-energized work practices and experience supporting build-out of substations (greenfield or brownfield). Strong working knowledge of OSHA standards, especially 1910.269 and 1926 Subpart V, and knowledge of NFPA 70E electrical safety requirements.

Essential Duties and Responsibilities:

Work alongside operations in the field — not just office-based safety.

Conduct field observations and coaching in real time.

Challenge unsafe conditions in high-risk environments.

Perform job safety analysis (JSA), pre-task planning, and energized work permitting.

Lead incident investigations specific to electrical and high-energy events.

Lead Plan of the Day (POD) safety discussions.

Build or improve electrical safety programs.

Audit grounding practices, temporary protection systems, and barricading.

Track observations, near misses, and corrective actions.

Support switching procedures and coordination with system operators.

Work directly with utility clients and owner representatives.

Technical Knowledge:

Working knowledge of high-voltage systems.

Switching, grounding, and clearance requirements.

Familiarity with energized vs. de-energized work practices.

Understanding of arc flash hazards.

Understanding of induced voltage hazards.

Understanding of step and touch potential hazards.

Strong working knowledge of OSHA standards, especially 1910.269 and 1926 Subpart V.

Knowledge of NFPA 70E electrical safety requirements.

Familiarity with utility owner safety standards and switching/LOTO procedures.

Field Leadership:

Work alongside operations in the field.

Conduct field observations and coaching in real time.

Challenge unsafe conditions in high-risk environments.

Lead Plan of the Day (POD) safety discussions.

Work directly with utility clients and owner representatives.

Requirements:

Electrical background with direct experience in transmission and/or substation construction.

Experience supporting build-out of substations (greenfield or brownfield).

Strong documentation and reporting skills.

High credibility with electricians and linemen.

Calm under pressure during high-risk operations.

Decisive in stop-work situations.

Detail-oriented in high-consequence environments.

Strong communicator across craft, supervision, and executive levels.

Visible, present, and engaged in the field.

Education and Experience:

CUSP or CHST preferred.

OSHA 30 (Construction) or higher.

Electrical apprenticeship, journeyman, or engineering background preferred.

First Aid/CPR/AED certified.

Utility safety training (if applicable).

Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position.

Completion and clearance of this physical are mandatory steps in the hiring process.

Overview

A well-established civil contractor is seeking a Chief Estimator to lead estimating and preconstruction efforts across water/wastewater, underground utilities, and related civil infrastructure projects throughout Texas. This role will have full ownership of bid strategy, pricing accuracy, and team leadership, partnering closely with operations and executive leadership to support growth and margin objectives.

The ideal candidate brings deep estimating leadership experience within WWTP, underground utilities, or similar heavy civil scopes, and is comfortable managing complex pursuits from concept through final proposal.

Key Responsibilities

• Lead all estimating and preconstruction activities for water/wastewater plants, underground utilities, pump stations, lift stations, and civil infrastructure projects
• Establish bid strategies, review risk profiles, and drive accurate, competitive pricing aligned with company margin targets
• Oversee the preparation of detailed cost estimates, takeoffs, schedules, and subcontractor scopes
• Manage, mentor, and develop estimators and preconstruction staff
• Coordinate with operations, project management, and field leadership to ensure constructability and cost alignment
• Lead subcontractor and vendor outreach, scope reviews, and bid leveling
• Participate in executive‑level go/no‑go decisions and long‑range preconstruction planning
• Support client presentations, value engineering, and alternative delivery discussions as needed

Required Experience & Qualifications

• 10+ years of estimating experience within civil construction, with proven leadership at a senior or chief level
• Strong background in WWTP, underground utilities, or closely related civil infrastructure projects
• Experience estimating projects ranging from $10M+ in value
• Demonstrated ability to lead teams, set standards, and improve estimating processes
• Strong understanding of civil means and methods, risk management, and cost drivers
• Proficiency with estimating and preconstruction tools such as HCSS HeavyBid, Bluebeam, Excel, WinEst, Procore, and scheduling software (P6 or MS Project)
• Excellent communication skills with the ability to engage executives, clients, and project teams

Preferred Experience

• Texas market experience (municipal, county, or utility district work)
• Design‑build, CMAR, or alternative delivery exposure
• Background collaborating closely with operations on self‑perform scopes

What’s Offered

• Senior leadership role with direct impact on company growth and profitability
• Competitive compensation package with performance incentives
• Long‑term career path and executive visibility
• Opportunity to lead marquee water and utility infrastructure projects across Texas

Element Staffing is recruiting for a Technical Support Specialist for a global analytical instrumentation company supporting customers throughout North and South America. The Technical Support Specialist will serve as a key point of contact for distributors, engineers, and end users by providing remote troubleshooting, answering technical inquiries, and assisting with system installation and configuration questions. The role requires strong analytical problem-solving skills, hands-on familiarity with GC/MS instrumentation, and the ability to communicate technical concepts clearly to customers. This is an excellent opportunity for someone with a strong analytical instrumentation background who enjoys solving technical challenges, supporting laboratory professionals, and developing expertise with advanced analytical technologies. Local candidates only.

Duties/Responsibilities:

• Provide remote technical support to customers, distributor partners, and field engineers via email and phone for analytical instrumentation systems
• Troubleshoot hardware, configuration, and analytical performance issues related to pyrolysis-GC/MS systems and associated accessories
• Assist customers and distributor engineers with system installation, configuration, and operational troubleshooting during and after instrument setup
• Answer technical inquiries related to instrument components, part numbers, consumables, software licenses, and system configurations
• Support instruments integrated with major GC/MS platforms such as Agilent, Shimadzu, Thermo Fisher Scientific, JEOL, and SCION
• Provide guidance on gas chromatography (GC) and mass spectrometry (MS) system operation, including gas line configurations, hardware compatibility, and instrument performance
• Assist with interpreting GC/MS data outputs and mass spectral results, helping customers diagnose analytical issues and optimize instrument performance
• Work with distributor engineers who may be onsite with customers during installations or service calls, providing real-time troubleshooting and technical guidance
• Develop a strong working knowledge of pyrolysis-based analytical techniques and how the company’s instrumentation integrates with GC/MS systems used in polymer, environmental, forensic, and materials science applications
• Assist with technical training sessions, product demonstrations, and trade show support as needed
• Maintain detailed documentation of customer support activities, troubleshooting steps, and resolutions

Additional Information:

Years of Experience: 1–5+ years of experience with GC/MS

Education: Bachelor’s degree in Chemistry, Chemical Engineering or a related scientific field

Shift/Travel: Monday–Friday, 8:00 AM – 5:00 PM CST (flexibility required depending on workload)

• Travel may include: Up to ~25% domestic travel and occasional international travel

Compensation: $26-32/hr depending on experience

Assignment Type: Contract-to-Hire

Location: Houston, TX

• Purpose of the positionNeed Complete project from initial Line Set up, electrical Wiring to final equipment inspection and maintenance, ensuring the operation of the assembly line and equipment smoothly Running.Duties and Responsibilities 1.     Production line framework Setup 
  2.     Production electrical Wire planning and setup
  3.     Project equipment and consumables procurement tasks Complete
  4.     Equipment/consumables management
  5.     Electrical and mechanical safety education and training
  6.     Infrastructure maintenance
  7.     Equipment Safety inspection
  8.     Energy conservation and emission reduction implementation
  9.     Regularly inventory assets within the responsibility range, ensuring account consistency.
  10.   Implementing safety production, on-site management, and labor protection special work within the responsibility range.Education and work experience
  • Successful completion of 4-years of high school, or equivalent, plus completion of two years of college or graduation from a two-year technical college with an associate’s degree.  Degree required: Diploma
  Supervision :  direct reports are FAC Line Leaders
  
  Working conditions
  • Office-based role, fast-paced work environment
  • The position requires flexible working hours coordination capacity, the ability to respond to emergencies when necessary, and a willingness to adjust personal schedules as needed to support team goals and ensure smooth overall operations.
  Skills:  electric and air, mechanical, automation-related knowledge and skills, requiring an electric worker certificate, Proficient in English communicate, candidates with Chinese work capacity are preferred, but not required
  
  Functional Skills:
  1. Equipment Maintenance and Management Ability
  2. Project Planning and Execution Ability
  3. Energy Conservation and Emission Reduction Implementation Ability
  4. Learning and Innovation Ability
  
  Core Skills:
  1. Knowledge and Technical Ability
  2. Problem-Solving Ability
  3. Safety Awareness
  4. Team Assistance Ability
   

Regional Editor, Metals Recycling - The Americas

Location: Houston, US

Travel: Industry events and client engagement across the Americas

Compensation: Strong base salary + performance-linked bonus + comprehensive benefits

Lead the most commercially significant metals portfolio in the business.

This is a high-impact leadership role within a globally respected market intelligence organisation. You will shape regional strategy, lead a team of market experts and influence benchmark pricing across North America’s.

Why This Business

A globally respected organisation who delivers critical benchmark pricing and market intelligence across commodities markets worldwide. Its data underpins trading, risk management and commercial decision-making for major industry participants.

What You’ll Be Doing

• Lead and develop a team of six price reporters, driving editorial quality and pricing integrity across the Americas
• Shape and execute regional strategy, aligning with global growth objectives and benchmark expansion plans
• Champion IOSCO-compliant pricing methodologies, ensuring accuracy, audit readiness and market trust
• Engage senior market participants, including C-suite stakeholders, to strengthen adoption and industry credibility

What You’ll Bring

• Minimum three years’ experience within a price reporting agency, with strong exposure to metals recycling markets
• Proven leadership capability, with experience coaching, developing and retaining high-performing editorial teams
• Deep understanding of benchmark pricing processes and market engagement strategy
• Confidence operating at senior stakeholder level internally and externally

Who This Suits

You’re an experienced pricing editor ready to step into broader regional ownership. You combine editorial authority with commercial awareness and are comfortable influencing senior industry leaders. You lead through clarity and standards, not volume, and take pride in developing others while strengthening market credibility.

You want strategic visibility, autonomy to shape regional coverage and the platform to influence globally recognised benchmarks.

Apply now for a confidential conversation with Walker Lovell.

Clayton Services is searching for an HR Business Partner to join a thriving company in West Houston. The HR Business Partner will be responsible for aligning human resources strategy with business operations, managing complex employee relations matters, ensuring compliance with federal, state, and local employment regulations, and supporting leadership and employees across the organization.

Job Type: Direct Hire

Pay Rate: $100,000 - $110,000/year plus discretionary bonus

Benefits: Medical, dental, vision, 401(k) w/ 3% match, life, disability, 3 weeks of vacation, 1 week of sick time - (medical insurance is paid up to 94% for employee *and* family coverage)

Work Setting: Hybrid - (Monday & Friday remote & Tuesday, Wednesday, Thursday in office

HR Business Partner Responsibilities:

• Serve as a strategic HR partner to management and employees across assigned business units
• Manage and resolve complex employee relations issues, including conducting thorough and objective investigations
• Provide day-to-day guidance to managers on performance management, coaching, counseling, corrective action, and disciplinary processes
• Ensure compliance with federal, state, and local employment laws and regulations
• Provide interpretation and guidance on HR policies, procedures, and best practices
• Support workforce planning, organizational changes, restructures, and succession planning initiatives
• Facilitate new hire onboarding and orientation for office and field employees
• Support employee engagement initiatives, communications, and team-building activities
• Analyze HR metrics and trends to develop solutions, programs, and policy improvements
• Track and document compliance with mandatory and non-mandatory training, including anti-harassment and discrimination training
• Support administration and recordkeeping related to ACA, ADA, FMLA, COBRA, EEOC, EEO-1, FCRA, LOA, STD, and other employment-related requirements
• Assist with HR compliance and policy development for new contracts and business initiatives
• Participate in employee disciplinary meetings, investigations, and terminations as needed
• Maintain accurate and confidential employee records within electronic HR systems
• Collaborate with internal departments and leadership to support organizational goals
• Perform other HR-related duties as assigned

HR Business Partner Skills and Abilities:

• Strong knowledge of employee relations, investigations, and employment law
• Excellent verbal and written communication skills
• Strong interpersonal and relationship-building abilities
• High level of professionalism and ability to maintain confidentiality
• Strong analytical, problem-solving, and decision-making skills
• Excellent organizational and time management skills with the ability to prioritize competing deadlines
• Ability to function effectively in a fast-paced, multi-site environment
• Proficiency with Microsoft Office Suite (Word, Excel, PowerPoint, OneNote)
• Proficient with LLM AI tools
• Willingness to travel up to 15% per year as required

HR Business Partner Education and Experience:

• High School Diploma or GED required; Bachelor's degree preferred
• Minimum of 5+ years of experience resolving complex employee relations issues
• Broad working knowledge of multiple HR disciplines, including performance management, compensation practices, employee relations, and employment law
• Experience supporting field and/or multi-location workforces preferred
• Knowledge of Davis-Bacon and Service Contract Act (SCA) regulations preferred
• HR certifications, such as SHRM-CP, SHRM-SCP, PHR, or SPHR, are preferred
• Experience working with Paycom is a plus

• HR Business Partner - Immediate need. Apply today!

Houston, Texas: Flexicrew Technical Services (FTS) is seeking a temporary Salesforce & QuickBooks Integration Specialist to support the setup, integration, and training of a newly purchased Salesforce system with an existing QuickBooks platform. This role will focus on configuring Salesforce, assisting with integration into QuickBooks, and providing hands-on training to key personnel to ensure effective system use. This is an immediate, short-term assignment expected to last approximately one month.

Essential Duties:

• Set up and configure Salesforce to align with business operations and user needs

• Integrate Salesforce with QuickBooks to improve workflow and data management between systems

• Troubleshoot setup and integration issues and provide practical solutions

• Train internal staff, including leadership, on Salesforce functionality and day-to-day use

• Guide users on best practices for system navigation, data entry, reporting, and process management

• Provide ongoing support during the temporary assignment to ensure a successful rollout and adoption

Requirements/Skills:

• Experience with Salesforce setup, configuration, and user training

• Strong knowledge of QuickBooks and system integration processes

• Ability to troubleshoot technical issues and simplify solutions for end users

• Experience supporting CRM implementation and onboarding users

• Strong communication skills with the ability to teach and guide non-technical users

• Ability to work independently and manage a short-term project efficiently

Physical Requirements:

• Ability to sit for extended periods while working on a computer

• Ability to communicate clearly in person, by phone, and via video conferencing

• Ability to occasionally stand, walk, and perform light office-related activities

• Ability to lift up to 15 pounds, if needed

Equal Opportunity Statement:

Flexicrew Technical Services is an Equal Opportunity Employer; employment with FTS is governed on the basis of merit, competence, and qualifications. Employment or consideration will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Join Kelly Government Solutions as an ICU Registered Nurse (RN) to provide critical care to our veterans at the VA Houston (TX) Healthcare System. The role ensures our Veterans receive the care and benefits they have earned through service to our country.

Work Schedule: 36 hours/week: Three (3) 12-hour NIGHT shifts per week; 4 total weekend shifts per month required (such as every Saturday or 2 full weekends)

Pay Rate: $56.36/hour plus $5.09/hr H&W benefit

Work Location: Michael E. DeBakey Veterans Affairs Medical Center, Houston, TX

Specialty Care Areas: Intensive Care Unit-Must be willing to float to other units if needed

TASKS

(1) Utilize clinical knowledge to effectively assess, implement health promotion and prevention interventions, manage acute and chronic illness states, assist patient/residents in the attainment of optimal levels of functioning rehabilitation

(2) Evaluate patient/resident response to actual or potential health problems

(3) Maintain patient/resident confidentiality and a safe patient/resident care environment, including familiarity with requirements such as medication administration, patient/resident/family education, discharge process, restraint usage, hazardous waste disposal, etc.,

(4) Provide patient/resident-centered care to assess the health care needs and maintain, develop, and carry out a plan of care to meet interdisciplinary goals.

(5) Perform assessments, check vitals, insert IV lines, manage peripheral and central lines, administer medication, perform wound, tracheostomy, and ventilatory care (when needed), deliver specimens to the lab, and coordinate with patient admission and discharge.

QUALIFICATIONS

(1) Graduate of a school of nursing that was approved and/or accredited by the appropriate State agency and accredited by either the Accreditation Commission for Education in Nursing (ACEN) or the Commission on Collegiate Nursing Education (CCNE)

(2) Current unrestricted license from a State, Territory or Commonwealth of the United States or the District of Columbia.

(3) Two years of experience in critical care/ICU nursing in the past three (3) years

(4) Current BLS and ACLS certifications

(5) US citizenship as per contract requirements to complete background check and security clearance processes

(6) Ability to comply with VA policy, which prohibits artificial nails, false eyelashes, and visible tattoos and body/facial piercings

PLEASE APPLY ONLINE

When you apply, please know a Kelly Government Solutions Recruiter will review your resume and will contact you directly, if your skills and experience match the requirements of this position; a full job description can be made available at that time.

Senior Department Manager - Engineering (Cross-Functional)

Location: Charlotte, NC

Department: Engineering

Reports To: Director of Engineering

Employment Type: Full-Time

About the Role

We are seeking a cross-functional Engineering Manager to lead the planning and execution of engineering for combined-cycle power plant projects. This leader will be responsible for technical execution, quality, and disciplined procedures, ensuring effective information flow across engineering disciplines and seamless integration with construction, project management, supply chain, and field services. The role requires a business-minded manager who can drive staffing, manage budgets, champion the use of our High Value Engineering (HVE) center, and hold teams accountable while modeling servant leadership.

Why Join Us

• Lead high-impact, grid-relevant projects in a critical energy segment.
• Influence execution methods, tools, and standards across the portfolio.
• Grow and mentor a large, high-performing, cross-functional team.

What You’ll Do

Cross-Functional Leadership & Information Flow

• Orchestrate work across mechanical, electrical, I&C, civil/structural, and field engineering teams with clear interfaces, handoffs, and deliverable owners.
• Establish and enforce information flow processes (e.g., requirements management, design inputs/outputs, change management, RFI/submittal workflows) to minimize rework and schedule risk.
• Ensure engineering decisions reflect constructability and downstream impacts on procurement, construction means/methods, commissioning, O&M, and client requirements.

Technical Execution & Quality Ownership

• Own the technical execution plan and quality of engineering deliverables (calculations, drawings, 3D models, data sheets, specs, studies, and vendor documents).
• Lead phase-gate reviews, design reviews, constructability reviews, and management of change (MOC).
• Implement procedures, checklists, QA/QC hold points, and compliance with codes/standards for combined-cycle facilities (e.g., ASME, API, NFPA, NEC/NFPA 70, NERC, and applicable environmental/permitting requirements).
• Drive lessons learned and continuous improvement across projects and portfolios.

Team Leadership (100+ People, Direct, Indirect & Matrix)

• Lead and influence large, direct, indirect and matrixed teams of 100+ across in-house staff, contractors, and HVE resources.
• Set expectations, drive accountability, and cultivate a servant leadership culture that emphasizes clarity, follow-through, and psychological safety.
• Coach discipline leads/PMs; ensure clear scope, deadlines, and ownership.

Staffing, Resource Planning & HVE Center Utilization

• Own project staffing plans, demand forecasting, and leveling; align resources with schedules and budgets.
• Champion the High Value Engineering (HVE) center: identify opportunities, define scope split, standardize interfaces, and track productivity/quality metrics to maximize value.
• Partner with Department Managers & Talent Acquisition on proactive hiring initiatives and critical role coverage.

Required Qualifications

• Bachelor’s degree in Mechanical, Electrical, Civil/Structural, Chemical, or related engineering field from an ABET/EAC accredited program.
• Minimum 20 years of experience (w/ PE); or 25+ years of experience without a PE
• Demonstrated leadership of large teams (50-100+ people) - direct, indirect and matrixed - across multiple disciplines.
• Proven ownership of technical execution and quality with strong procedure orientation and information-flow governance.
• Solid understanding of gas turbines, HRSGs, steam turbines, balance of plant, I&C, and electrical systems.
• Experience managing budgets, forecasts, and performance metrics (e.g., EVMS, productivity, cost/schedule variance, change management).
• Strong communication skills and the ability to influence across stakeholders.

Preferred Qualifications

• 10–15+ years delivering combined-cycle power plant projects across design, procurement, construction, commissioning, and handover.
• Professional Engineer (PE) license; ability to oversee stamping strategy and licensing compliance across jurisdictions.
• EPC or OEM/EPCm experience with phase-gated execution from FEED through commissioning/startup.
• Familiarity with standards and practices: ASME/ANSI, API, NFPA/NEC, NERC, OSHA, environmental permitting, and grid interconnection.
• Tools exposure: Primavera P6 or MS Project, Navisworks/Clash, CAESAR II, ETAP, plant design suites, PLM/PDM, EDMS, and analytics/reporting tools.
• Experience with Advanced Work Packaging (AWP), modularization, and construction-driven design.
• Background in leveraging High Value Engineering centers with defined SLAs, KPIs, and quality gates.

Job Description

We are seeking a skilled Mechanical Engineer to manage and expand relationships with internal and outsourced development partners on mechanical design and development. The role involves reviewing and evaluating designs and project activities for compliance with technology and development guidelines and standards, and providing tangible feedback to improve product quality. You will also review competitor products and report on components such as hinges, materials used, type of design, thermal constraints, subsystem design, and manufacturability. Additionally, you will provide domain-specific expertise and overall mechanical/thermal leadership to cross-organization projects, programs, and activities, and determine the complete mechanical and thermal BOM assembly list for PCs, including laptops, desktops, and docks.

Responsibilities

• Manage and expand relationships with internal and outsourced development partners on mechanical design and development.
• Review and evaluate designs and project activities for compliance with technology and development guidelines and standards.
• Provide tangible feedback to improve product quality.
• Review competitor products and report on components such as hinges, materials used, type of design, thermal constraints, subsystem design, and manufacturability.
• Provide domain-specific expertise and overall mechanical/thermal leadership to cross-organization projects, programs, and activities.
• Determine the complete mechanical and thermal BOM assembly list for PCs, including laptops, desktops, and docks.

Essential Skills

• Proficiency in electronic engineering, mechanical engineering, and electronics.
• Experience with hardware and PCB design and teardown.
• Bachelor of Science in Mechanical Engineering.
• Proficiency in CREO.
• Experience in electronics packaging and BOM analysis of equipment, PCB design, board layout, and knowledge of PC, laptop, desktop, and notebook design.