Engineering Journal Jobs in Alhambra, CA

D'Leon Consulting Engineers is seeking a Contract Administrator in Los Angeles, CA

Responsibilities

• Assist LAWA with planning of procurements and setting pre‐award schedules for contracts including Board actions
• Assist in coordination of Pre‐Bid/Proposal Meetings to present the Project and RFB/RFP to potential bidder/proposers.
• Prepare drafts of RFP/RFB addenda for LAWA to review, finalize, and distribute to Planholders
• Prepare draft award recommendations and Board reports
• Conform final contract documents
• Prepare required reports and correspondence
• Attend various meetings, including pre‐bid proposal and post‐bid proposal debriefings
• Assist in Contract standardization process
• Monitor all aspects of contract compliance
• Assist in resolving problems and disagreements between contractors and LAWA
• Review contractor invoices for contractual compliance
• Conduct closeout actions upon contract completion such as final audit, payment, etc. under the direction of LAWA personnel
• Coordinate changes across the project environment, ensuring correct procedures are followed and changes are accurately recorded, scheduled and controlled
• Prepare Change Documents
• Route Change Documents for signature and tracks status
• Create and distribute change reports and analysis
• Support the project management team in maintaining timely and effective change support processes, procedures and systems
• Lead the development and maintenance of any periodic (daily, weekly, monthly) status reports to keep management and/or owner informed of change progress
• Ensure that changes properly encumber contractual capacity and budget
• Coordinate with ADP scheduling to ascertain time impacts of changes under consideration and property documents
• Assist with implementation of trend and change support programs
• Contribute to the advancement of ADP’s goals through commitment to productive collaboration with all stakeholders

Qualifications

• A Bachelor’s degree in engineering or business related field, as well as training in procurement, contract, construction and commercial law
• Minimum of 5 years of relevant experience in administration of commercial/government contracts
• Experience with Construction Management Softwares (PM Web, Primavera) and Adobe Acrobat
• Must have a self‐starter attitude with proactive, results‐oriented focus; and willing and capable to assume additional responsibilities
• Demonstrated success on the job, as evidenced by satisfactory performance, acceptance of responsibility and growth in previous positions
• Proven accuracy, reliability and completeness in job accomplishment
• Effective oral and written communication skills
• Must be able to interface with a variety of people with different technical levels and educational backgrounds
• Must be detail oriented and highly organized
• Must be able to produce accurate and timely results while maintaining a customer service attitude
• Knowledge and direct experience in SBE/DBE/MWBE program coordination preferred

D’Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Freelance Sales Director Global Technology Staffing & Remote Workforce

Location: Los Angeles, California, United States

Experience: 8+ Years

People Prime is a global talent solutions company specializing in helping organizations build high-performing technology teams through Remote hiring, Staff augmentation, and Offshore delivery models.

Headquartered in India, People Prime connects companies worldwide with highly skilled technology professionals across emerging and advanced digital domains. We enable organizations to scale faster by providing access to a curated network of experienced engineers, AI specialists, data professionals, and technology consultants who can work remotely or as part of distributed global teams.

People Prime focuses on enabling companies to hire high-quality remote technology talent from India, one of the world’s largest and fastest-growing technology talent markets. Through our strong recruitment ecosystem and technical screening process, we provide organizations with access to professionals across a wide range of digital and enterprise technologies.

1. Artificial Intelligence & Machine Learning: Machine Learning Engineers: Generative AI Engineers: Prompt Engineers: Natural Language Processing (NLP) Specialists: Computer Vision Engineers: AI Model Training & Fine-Tuning Experts
2. Data Engineering & Analytics: Data Engineers, Data Architects: Data Scientists: Big Data Specialists, Data Platform Engineers: Analytics & BI Professionals
3. Cloud & DevOps: Cloud Architects (AWS, Azure, GCP): DevOps Engineers: Platform Engineers, Kubernetes Specialists: Infrastructure Automation Experts
4. Software Engineering: Full Stack Developers: Backend Engineers: Frontend Engineers: Mobile Application Developers: Microservices & API Developers
5. Enterprise Platforms: SAP Consultants: Salesforce Experts: ServiceNow Professionals: ERP & Digital Transformation Specialists

Key Responsibilities:

• Identify and acquire new clients seeking technology staffing or remote engineering teams

• Generate opportunities for contract staffing, staff augmentation, and distributed engineering teams

• Develop relationships with technology companies, startups, and enterprise clients

• Present People Prime’s global talent and offshore delivery capabilities

• Build and manage a strong pipeline of staffing opportunities

• Collaborate with delivery and recruitment teams in India to fulfill client requirements

• Negotiate client contracts, rate cards, and service agreements

• Track hiring trends in AI, data engineering, cloud, and software development

Required Qualifications:

• 8+ years’ experience in IT staffing business development or recruitment sales

• Proven track record of generating staffing opportunities and closing new clients

• Strong network within technology companies, startups, or enterprise organizations

• Experience selling staff augmentation or contract staffing services

• Excellent communication, negotiation, and relationship management skills

Preferred Experience:

• Experience selling offshore technology talent or remote engineering teams

• Exposure to hiring in AI, data engineering, cloud, or software development domains

• Understanding of distributed workforce and remote hiring models

Success Metrics:

Success in this role will be measured by:

• New client acquisitions

• Remote staffing requirements generated

• Revenue from staffing engagements

• Successful onboarding of consultants

• Client retention and satisfaction

Performance expectation:

Minimum 4 Contract placements per month

Compensation:

USD 1500 Payable on Every AI/ Technology Contractor Successful onboarding ( Minimum 5 Onboards Expected Every Month )

6% of gross margin for the first 6 months of each engagement

Why Join People Prime:

• Sell high-demand global technology talent solutions

• Work with a scalable offshore delivery model with great cost advantage to clients

• High earning potential with strong commission structure

• Exposure to fast-growing sectors such as AI, cloud, and data engineering

• Opportunity to build long-term partnerships with global technology companies

About The Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.

The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.

This is a full time role.

What You Will Do:

• Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
• Perform engineering design and analysis for ride systems, focusing on electrical control systems
• Develop control system and network architectures
• Design, model, and analyze electrical supply systems
• Research new products, technologies, and methodologies
• Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
• Develop control equipment requirements and specifications
• Develop and implement proof-of-concept mock-ups and prototypes
• Conduct hazard assessments and failure modes and effects analysis
• Manage vendors, contractors, and consultants developing and implementing ride control systems
• Define and oversee supplier and consultant design and delivery
• Ensure all delivery and performance requirements are satisfied
• Conduct factory acceptance tests and ride system installation

Required Qualifications & Skills

• 10+ Years experience in the Engineering field as related to controlling electromechanical systems
• Experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Extensive knowledge of electrical design standards and codes, including UL508a and NEC
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Expertise in motor and motion control methods and components
• Ability to travel domestically and internationally for 1-week to 3-year durations.
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Licensed professional engineer
• Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
• Proficient in Rockwell and Siemens automation systems architecture and components
• Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at DxMedia

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

At Ride Engineering, it is our responsibility to move people through our stories in magical ways that bring these experiences to life! Ride Engineers bring optimism and solutions to design challenges that often seem impossible and partner with diverse creative talent to define and build one-of-a-kind experiences that bring fun and joy to millions of people all around the world. We Create to Inspire!

The Ride Control Systems Engineer will report to the Executive Ride Control Systems Engineer.

This is a full time role.

What You Will Do:

• Manage entire scope to conceive, design, & deliver control systems for a wide variety of complex and innovative ride systems and related equipment
• Conduct systems engineering for ride control systems
• Define system use cases and user needs
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Ensure compliance with control system safety standards
• Perform engineering design and analysis for ride control systems
• Develop control strategies and algorithms
• Research new products, technologies, and methodologies
• Design, model, and analyze control systems, data communication, and dynamic systems
• Collaborate with other design and engineering professionals to implement ride control systems
• Develop implementation plans and budgets
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents, and lead testing efforts

Required Qualifications & Skills

• 5+ years experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Experience with requirements management, test plans/procedures, and test execution
• Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Solid skills in technical document writing
• Ability to travel domestically and internationally for 1-week to 3-year durations
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Proficient with engineering design tools, including AutoCAD, Matlab, Simulink, Solidworks
• Proficient in Rockwell and Siemens automation systems architecture and components
• Expertise in motor and motion control methods and components
• Knowledge of pneumatic controls and devices
• Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at DXMedia
  
  The hiring range for this position in California is $123,300 to $200,300 per year. The base pay actually offered will take into account internal equity and also may vary
  depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.

About The Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Ride Control Hardware Engineers work within Walt Disney Imagineering's Ride Studio in a highly collaborative environment on diverse teams. Engineering activities cover all aspects of control system design and implementation, from concept to commissioning, for a wide variety of innovative ride platforms.

The Ride Control Hardware Engineer will report to the Ride Control Systems Engineering Executive.

This is a full time role.

What You Will Do:

• Support programmable, electrical, and electronic hardware scope to design and deliver control systems for complex, innovative ride systems
• Perform engineering design and analysis for ride systems, focusing on electrical control systems
• Develop control system and network architectures
• Design, model, and analyze electrical supply systems
• Research new products, technologies, and methodologies
• Lead a team of ride control engineers and collaborate with other professionals to develop ride control systems
• Develop control equipment requirements and specifications
• Develop and implement proof-of-concept mock-ups and prototypes
• Conduct hazard assessments and failure modes and effects analysis
• Manage vendors, contractors, and consultants developing and implementing ride control systems
• Define and oversee supplier and consultant design and delivery
• Ensure all delivery and performance requirements are satisfied
• Conduct factory acceptance tests and ride system installation

Required Qualifications & Skills

• 10+ Years experience in the Engineering field as related to controlling electromechanical systems
• Experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Extensive knowledge of electrical design standards and codes, including UL508a and NEC
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Expertise in motor and motion control methods and components
• Ability to travel domestically and internationally for 1-week to 3-year durations.
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Licensed professional engineer
• Proficient with engineering design tools including AutoCAD, Matlab, Simulink, Solidworks, EPLAN
• Proficient in Rockwell and Siemens automation systems architecture and components
• Electrical and troubleshooting skills (voltmeter, oscilloscope, etc.)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at DxMedia

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

At Ride Engineering, it is our responsibility to move people through our stories in magical ways that bring these experiences to life! Ride Engineers bring optimism and solutions to design challenges that often seem impossible and partner with diverse creative talent to define and build one-of-a-kind experiences that bring fun and joy to millions of people all around the world. We Create to Inspire!

The Ride Control Systems Engineer will report to the Executive Ride Control Systems Engineer.

This is a full time role.

What You Will Do:

• Manage entire scope to conceive, design, & deliver control systems for a wide variety of complex and innovative ride systems and related equipment
• Conduct systems engineering for ride control systems
• Define system use cases and user needs
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Ensure compliance with control system safety standards
• Perform engineering design and analysis for ride control systems
• Develop control strategies and algorithms
• Research new products, technologies, and methodologies
• Design, model, and analyze control systems, data communication, and dynamic systems
• Collaborate with other design and engineering professionals to implement ride control systems
• Develop implementation plans and budgets
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents, and lead testing efforts

Required Qualifications & Skills

• 5+ years experienced in fail-safe and safety-related control system design
• Extensive knowledge of control processors, components, and communication networks
• Highly proficient in industrial control system installation, integration, and commissioning
• Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
• Experience with requirements management, test plans/procedures, and test execution
• Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
• Familiarity with amusement and automation industry standards, including ASTM F2291
• Solid skills in technical document writing
• Ability to travel domestically and internationally for 1-week to 3-year durations
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities

Preferred Qualifications & Skills

• Proficient with engineering design tools, including AutoCAD, Matlab, Simulink, Solidworks
• Proficient in Rockwell and Siemens automation systems architecture and components
• Expertise in motor and motion control methods and components
• Knowledge of pneumatic controls and devices
• Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
• Knowledge of international amusement industry standards applicable in France, Hong Kong, or China

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred

Additional Information:

• Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at .

#DXMedia

Woodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet.

What's in it for you:

Woodard & Curran is offering a unique opportunity to join our southern California teams, which provide high-quality water and wastewater engineering services to municipal clients throughout the region and across the nation. The successful candidate will be a motivated, growth-oriented professional with the ability to manage project teams from the planning, preliminary design, final design, construction phases, start-up, and operations of facilities or infrastructure. You will have staff to mentor and clients to support. Not only will you have engineers to support you, but our integrated electrical, structural, CAD, operations, and SCADA teams will help you deliver an enhanced product. You will be an active participant in our delivery system improvement programs and continuous learning opportunities.

Location: Southern California – Los Angeles, Irvine, or San Diego

Travel: Yes, Local

Who we are looking for:

You will primarily provide engineering support on drinking water, wastewater, recycled water, and water resources projects. This position offers the opportunity to direct and collaborate with a team of junior and mid-level staff while providing the ability to consistently work with mid- and senior-level technical staff and leadership across the organization. The ideal candidate is a technically focused individual with strong experience in evaluating, planning, designing, and constructing drinking water and wastewater infrastructure and systems and experienced in engaging with client stakeholders such as operators, superintendents, and public officials to understand how to support their needs. Familiarity with a broad range of issues related to master planning, treatment, distribution, and collection systems is preferred. You will lead the technical delivery of multiple projects, must be familiar with local and federal regulations, and be able to support marketing and proposal efforts.

What You Will Be Doing at Woodard & Curran:

Act as the Project Manager for all sizes of projects

Work alongside Technical Manager(s), when needed, to lead the technical approach and delivery of projects.

Prepare and deliver presentations and training programs to internal and external clients and professional associations.

Support business development efforts under the direction of a client manager to provide technical support and guidance to a range of clients

What You Will Need To Succeed:

10-15 years of engineering experience.

A B.S. Degree in Civil or Environmental Engineering or an M.S. Degree is preferred.

Registered Professional Engineer in California

The successful candidate will have technical and project delivery expertise in civil and environmental engineering and an in-depth understanding of the engineering concepts associated with all types of municipal water and wastewater systems, including water supply and treatment processes and distribution and collection systems infrastructure.

Knowledgeable in state bidding laws and funding programs.

Up to date on the latest technological advances, regulatory trends, equipment, and processes.

Superior writing, communication, and presentation skills.

Employee Support & Benefits

Retirement Savings:

• 401(k) Pre-tax or Roth Contributions: The company matches 100% of the first 3% of salary contributed

Time away from work:

• Observed holidays: Choose up to 9 holidays to observe annually

• Vacation: Accrued based on years of experience and calculated on hours worked

• Sick time: Paid sick time for non-work related illness or injury.

• Parental leave: Up to 80 hours of Paid Parental Leave for child bonding

Coverage and support for your needs and well-being:

• Disability: Paid short and long term disability

• Health: Medical plan options; plus dental and vision plans.

• Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.

• Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources.

Equal Employment Opportunity

Woodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors.

If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer.

Inclusion & Belonging

We welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively.

At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us.

Non-Solicitation Disclosure:

Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates.

This role has the option for remote work, and the anticipated pay range is flexible, depending on factors such as the employee's primary work location, skills, experience, and education. The following examples illustrate how the pay range for the same role can vary based on different locations.

San Diego, CA $130,000 – $150,000

Los Angeles, CA $140,000 – $160,000

This position's anticipated pay range is provided; the final exempt salary or non-exempt hourly pay will depend on experience level and consider a percentage-based geographic differential based on where the final candidate will be working. Geographic differentials recognize and reflect the cost of labor differences between geographic markets.

#LI-TB1

Salary Range: $130,000 - $160,000

JSG is hiring a Manufacturing / Sustaining Electrical Engineer in Monrovia, CA.

Prior experience in welding technologies, robotics, automation, laser systems, or industrial equipment manufacturing.

• Experience entering and implementing ECOs, and DCRs within an ERP system (Oracle / JDE Enterprise preferred).
• Familiarity with PCB CAD tools such as Altium Designer and/or mechanical CAD tools such as SolidWorks
• Experience with cost-reduction initiatives and obsolescence management.
• Experience using issue tracking software to monitor status of multiple ongoing tasks.
• Knowledge of ERP systems, engineering databases, and product data governance.
• Lean manufacturing or continuous improvement experience.
• Familiarity with RoHS, REACH, CSA, and other regulatory or compliance frameworks.
• Collaborate with production teams to identify and implement improvements in manufacturing processes (including time studies, root cause analysis, drawing clarification and design change requests)
• Interface with vendors, purchasing, quality, and manufacturing to resolve issues with purchased components including printed circuit assemblies.
• Development and maintenance of process routers, manufacturing instructions, and test instructions
• Work with sustaining engineering and manufacturing teams to define and design production tooling and test fixtures for process optimization.
• Function as primary trainer for assemblers on complex assemblies or updated processes.
• Serve as manufacturing liaison during New Product Development, providing feedback and assisting in design-for-manufacturability efforts.
• Participate in cost-reduction initiatives for resistance welding, laser, and benchmark standard product lines.
• Troubleshoot and resolve hands-on production issues in real time.
• Bachelor’s degree in Electrical Engineering, or a related engineering discipline.
• Three to five years of experience in sustaining engineering, manufacturing engineering, or product lifecycle management.
• Strong understanding of manufacturing processes, supply chain coordination, and product lifecycle support.
• Strong troubleshooting and analysis skills
• Experience with ECO-controlled engineering documentation packages including drawings, BOMs, routers, procedures, and quality control documentation.

** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

About the Role & Team

Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.

Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.

Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?

As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe.  Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!

You will report to the Ride Controls Systems Engineering Executive

This is a full time role.

What You Will Do:

• Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
• Perform engineering design and analysis for ride system networks, with focus on automation system architecture
• Design and test cyber security solutions and network architectures for ride systems
• Design, model, and analyze data network communication systems
• Research and test new products, technologies, and methodologies and conduct trade-off studies
• Prepare and propose new cyber security and network architecture concepts and standards
• Lead standards and policies development for ride control network and cyber security architectures
• Collaborate with and support project teams on network requirements, implementation, and issues
• Collaborate with attraction development teams to design and deliver ride networks
• Develop and analyze OT network performance requirements for high availability real-time system
• Develop and capture requirements and functional specifications in documents, drawings, and models
• Develop implementation plans and budgets for ride control network systems
• Develop and implement mock-ups and prototypes for proof-of concept efforts
• Develop test requirements and documents and conduct ride network installation/commissioning efforts

Required Qualifications & Skills

• At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
• At least 3 years of experience in network systems design, installation and configuration
• At least 3 years of experience with Linux and Windows system administration experience
• Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
• Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
• Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
• Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
• Demonstrated experience evaluating and remediating network and system vulnerabilities
• Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
• Solid skills in technical document writing
• Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
• Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
• Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems

Preferred Qualifications and Skills

• Proficient in Rockwell and/or Siemens automation systems architecture and components
• Experienced in fail-safe and safety-related system design and analysis
• Experience with multitasking software platforms and design approaches
• Experience with wired and wireless network design and configuration
• Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
• Knowledge of software configuration management/version control tools
• Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred

Education

• As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred

Additional Information:

• Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at  

#DXmedia

Location: Los Angeles, CA or Seattle, WA (In-office, not remote)

About FUNBOY

Founded in 2015, FUNBOY is a family-owned brand known for creating original, design-led inflatables that bring joy to every season. Best recognized for its award-winning pool floats, air beds, holiday décor, and outdoor play products, FUNBOY combines playful design with premium materials and thoughtful construction. The brand has collaborated with leading global names including Barbie, Missoni, the artist Drake, and is carried by major retailers such as Walmart, Target, and Amazon. FUNBOY is one of the world’s most recognizable inflatable brands on social media, celebrated for products that turn everyday moments into lasting memories. We’re growing fast and have big, fun things ahead - and we’re looking for an exceptional Marketing Director to jump in, make an impact, and help take FUNBOY to the next level..

Our products must perform beautifully across all channels—standing out visually online, meeting retailer-specific requirements, and scaling seamlessly for mass distribution—while maintaining FUNBOY’s signature quality and brand voice.

Role Overview

The Product Development Manager is responsible for managing the product development lifecycle from initial concept through manufacturing handoff. This role ensures products are designed, engineered, tested, and documented to meet the requirements of each sales channel and/or partner while remaining operationally efficient and aligned with brand standards.

The role partners closely with the Production team, who manage mass manufacturing and are actively involved throughout sampling, validation, and factory ramp-up.

This is a hands-on, cross-functional role suited for someone who enjoys working at the intersection of design, engineering, manufacturing, compliance, and omni-channel commerce.

Key ResponsibilitiesProduct Lifecycle

• Manage product development from concept ideation → design → engineering → sampling → testing protocol → manufacturing handoff
• Guide product development with an omni-channel mindset, accounting for the differing needs of DTC, marketplace, and big-box retail
• Work closely with the production team to manage development timelines aligned with retail line reviews, marketplace launch windows, and DTC drops
• Balance innovation, speed-to-market, cost, margin, and scalability

Concept & Design Development

• Partner with founders, design, production and marketing to develop new product concepts, categories, and line extensions
• Evaluate product ideas for brand alignment, channel fit, manufacturability, and commercial viability
• Work closely with the production team to guide materials, construction methods, and features that perform well across online merchandising, retail shelves, and high-volume fulfillment

Engineering & Technical Execution

• Oversee technical specifications, CADs, tech packs, BOMs, packaging structures, and master cartons
• Ensure products meet performance, durability, and safety standards appropriate for both DTC and mass retail environments
• Drive resolution of technical challenges uncovered during development and sampling

Sampling & Factory Collaboration

• Oversee the sampling process in close collaboration with the Production team and overseas factories
• Review and approve samples across function, materials, color, print, construction, and packaging
• Ensure samples reflect final retail-ready and DTC-ready specifications, minimizing late-stage changes

Manufacturing Handoff

• Own the final handoff to Production once a product is development-complete
• Ensure all documentation is finalized, including specs, testing protocol, packaging requirements, and channel-specific variations
• Support Production during early manufacturing runs to ensure design intent, quality, and channel requirements are maintained

Compliance, Testing & Retail Readiness

• Ensure products comply with all relevant U.S. and international safety standards (e.g., ASTM, CPSIA, Prop 65)
• Work with production team to account for retailer-specific compliance, packaging, labeling, and testing requirements
• Partner with testing labs and internal teams to manage certifications, warnings, and documentation for all sales channels

Cross-Functional & Omni-Channel Management

• Serve as the central hub between Design, Production, Sourcing, Marketing, E-commerce, and Retail partners
• Communicate channel-specific tradeoffs, timelines, and risks clearly to leadership
• Help build scalable product development systems that support rapid DTC launches and large retail programs simultaneously

Qualifications

• 5-10+ years of experience in product development, ideally within consumer products, outdoor goods, inflatables, or adjacent categories
• Proven experience guiding products from concept through manufacturing handoff
• Experience developing products for multiple sales channels, including DTC, Amazon, and/or big-box retail
• Strong understanding of overseas manufacturing, materials, tooling, and production processes
• Familiarity with retail compliance, packaging standards, and testing requirements
• Exceptional project management, communication, and decision-making skills
• Ability to balance creative vision with operational and commercial constraints
• Passion for design-led, brand-forward consumer products

What Success Looks Like

• FUNBOY consistently launches high-quality products on time across all channels
• Products are engineered to scale smoothly from DTC drops to major retail programs
• Sampling cycles are efficient with fewer late-stage surprises
• Clear, repeatable product development processes are in place
• Strong collaboration between Product Development, Production, and channel stakeholders
• Products hit target margins while maintaining FUNBOY’s premium look and feel

Why FUNBOY

• High-impact leadership role at a growing, design-obsessed omni-channel brand
• Opportunity to shape product strategy across DTC, Amazon, and national retail
• Creative freedom paired with real ownership and accountability
• Fast-moving, collaborative environment where great ideas ship

To apply please email   with your resume and subject line: "Production Manager Role"