Dleon Consulting Engineers Jobs in Usa

This position will be open until filled

To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff.

Position Snapshot/A Day in the Life:

This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others.

Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings.

Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level.

Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department.

The incumbent must have the ability to:

• Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations
• Maintain records of all plans and contract documents.
• Prepare progress reports on projects under construction; maintain records of changes and field notes.
• Investigate field problems affecting property owners, contractors and maintenance operations.
• Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies.
• Develop plans, specifications and other contract documents.
• Provide technical and professional engineering support services relative to assigned areas of responsibility.
• Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary.
• Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics.
• Calculate the quantity, quality and cost of materials used for various projects.
• Review engineering calculations of other engineers or engineering technicians.
• Prepare plans and specifications, maps, deeds and legal descriptions.
• Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements.
• Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing.
• Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets.
• Prepare traffic control plans and requirements.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer.
  
  

THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER.

WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions.

A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of:

• Principles and practices of civil engineering.
• Methods, materials and techniques used in the construction of public works projects.
• Modern developments, current literature and sources of information regarding engineering.
• Principles of advanced mathematics and their application to engineering work.
• Applicable laws and regulatory codes in assigned area of responsibility.

The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests.

Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering.

Preferred Qualifications

• At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results.
• Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines.
• Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis.
• Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests.
• Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials.
• Traffic Engineering license.

Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements.

License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License.

Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• Yes
  
  
• No
  
  

• 
  
  
• Yes
  
  
• No
  
  

Required Question

Position: Structural Engineer / Professional Engineer

We are one of the largest scaffolding, hoisting, access, safety, and protection companies in New York and are looking for skilled individuals to join our team who are knowledgeable, innovative, and ambitious. Our focus on people and relationships, and our uncompromising commitment to health and safety, allows us to acquire some of the best talent in the industry. Our knowledgeable and talented personnel set us apart from the competition with an unrivaled attention to detail and superior customer service. We can tackle any job while still adhering to the highest standards of safety and quality.

Key Responsibilities:

·        Design, analyze, and produce sealed engineered drawings for temporary structures, including but not limited to Common Platform Hoist Complexes, scaffold, overhead protection, and work platforms.

·        Inspect and sign off on all structures noted above.

·        Design, analyze, and produce sealed engineered drawings for temporary structures using steel, aluminum, lumber, and concrete.

·        Work closely with designers and PMs to provide optimized designs & solutions that meet the client's needs.

·        Liaise with other internal technical members, project managers, quality staff, production staff, and external technical persons, including consulting engineers, contractors, and inspectors.

·        Oversee, review, and approve internally produced fabrication drawings.

·        Review engineered construction design drawings for accuracy, completeness, and constructability.

Skills & Requirements:

• Degree in Civil or Structural Engineering accredited by the various States' PE governing boards.
• 2 to 5 years of experience as a Structural Engineer.
• Excellent communication skills (interpersonal and written) and proven ability to collaborate with team members in a multi-disciplined environment.

All successful candidates must:

•      Be proficient in English, both verbally and in writing.

•      Must have proven structural design and analysis experience.

•      Must be willing to obtain PE licensing and seal documents in various states.

•      Must have experience with Microsoft Office products.

•      Must be willing to travel across North America

Position & Location

· Full-time position

·        Position will be based in New Rochelle, NY

·        Includes standard company vacation, health, and dental benefits.

·        Salary based on experience ($80k to $150k).

Previous Pharmaceutical/Biotech experience is mandatory for this role.

MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and Validation.

MMR Consulting has offices in Canada, USA, and Australia.

This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers involved in the design, commissioning & qualification, start-up and project management of various processes, systems, and facilities. The ideal candidate should possess leadership skills to lead teams of intermediate & junior engineers.

This role is for Sr. BIOPROCESS ENGINEER will require to work on the design, project execution and commissioning of process systems in the biopharmaceutical industry. The ideal candidate should possess leadership skills to lead teams of intermediate & junior engineers

The role can be hybrid where you can work partially remotely with periodic trips to client sites on projects all over USA.

Responsibilities

• Provide technical guidance into the design, project management, commissioning and start-up of equipment and facilities, for upgrades, renovations and expansions of client facilities and processes.

• Support project execution from Feasibility through to project completion/handover, including all project stages such as:

o Feasibility

o Concept Design, Basic Design, Detailed Design

o Procurement

o Construction

o Project Monitoring/Governance

o Commissioning & Qualification

• Prepare/perform/review process engineering drawings, calculations, whether as part of engineering design or as part of verification of calculations of vendors/client/other consultants, or Junior Engineers at MMR Consulting. Drawings may include PFDs, P&IDs as well as others. Calculations may include heat exchanger, pump, piping, control valve sizing, heat and mass balances, as well as other engineered calculations.

• Prepare/review technical specifications and data sheets for various equipment, instrumentation, and systems (such as vessel data sheets, etc).

• Review technical documentation such as SDS/HDS, layouts, manuals, datasheets.

• Manage other engineering design firms, equipment vendors, construction firms, and internal/external stakeholders as required to execute projects.

• Integrate safety into the design and execution of all projects (HAZOP reviews, PHSRs, design reviews with EHS representatives).

• Prepare/review User Requirements Specifications (URS)

• Provide input into Commissioning (FAT, SAT) and Qualification Protocols (IQOQ), as well as support execution of Commissioning & Qualification.

• Prepare/review automation sequences, as required for Process Automation, such as Functional Specifications, Valve & Alarm Matrices.

• Coordination with other engineering disciplines and other cross-functional departments (automation engineering, facilities engineering, process engineering, validation, project management, operations, quality, safety).

• Facilitate project management tools throughout the execution of projects, such as procurement tracking, vendor management, meeting minutes / action lists, risk register log, schedule updates, project updates.

• Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, provide updates.

• Travel may be occasionally required for meetings with the client and equipment fabrication vendors or Factory Acceptance Testing (FATs).

• Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases.

• Client-management (maintain key Client relationships in support of business development and pursuit of new work), project scheduling/budgeting, coordination of client and MMR resources for effective project delivery, supporting business development (providing technical support to the sales as required for proposals/opportunities), presenting at industry conferences/publishing papers etc.

• Visit construction and installation sites.

• Supervise contractors during critical installations of process equipment and associated utilities.

• Other duties as assigned by client, and/or MMR, based on workload and project requirements.

Qualifications

• Knowledge of GMP requirements for working in pharma/biotech facilities, with a Basic understanding of SOPs, Validation, Change Controls.

• 10+ years of experience pharma process engineering experience, with at least 6 years of bioprocess engineering experience (upstream or downstream)

• Excellent written and spoken English is required including the preparation of technical documents in English

• Experience in leading teams.

• Experience with, and knowledge of some of the typical Biotechnology processes & peripheral systems is required; Upstream Biotech Processes (Fermentation, Bioreactors, Centrifugation, Thawing), Downstream / Purification Biotech Processes (chromatography, TFF, DF, NF-MF), Fill & Finish equipment, Media Preparation, CIP/SIP systems, Buffer Preparation, clean utilities (PW, WFI, CS, PS)

• Possess leadership skills, and be able to take initiative to lead projects, involving multiple stakeholders, departments, and varying complexity.

• Possess mentorship skills, to coach and develop junior and intermediate employees.

• Basic knowledge of AutoCAD is an asset.

• Engineering degree, preferably in Chemical, Biochemical, Mechanical Engineering or a related discipline.

Compensation: 140,000$ - 170,000$ based on experience.

Equal Employment Opportunity and Reasonable Accommodations

MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

MES (PAS-X) Lead Engineer (Biotech/Pharmaceutical)

Location – Wilson, NC

Aztec Technologies is an engineering and consulting firm providing expertise in the

pharmaceutical and biotechnology industries. Aztec Technologies and Aztec Process Automation

are part of Trinity Consultants Company.

Trinity Consultants, Inc., a leading international EHS, life sciences and environment consulting

services with 1500+ engineers worldwide.

Aztec Technologies provides solutions for Manufacturing Applications:

• Process and Facility Automation

• Project Management

• MES

• Data Analytics

With offices across 3 continents, consulting firm with over 20 years of experience within the

biopharmaceutical and pharmaceuticals industries.

The successful candidate will work with a group of engineers involved in the design, automation,

commissioning and start-up of various processes, systems, and facilities. A combination of

strong technical aptitude, automation engineering skills and technical writing are the desired skill

set. This is an outstanding opportunity to join our growing team and to work in the Life Sciences

space that will enhance professional opportunities!

Candidates need to be local or willing to relocate to the areas of operation where we have open

opportunities for immediate hire in the Wilson, NC area:

Key Responsibilities:

• Own MES configuration management for PAS-X, including:
• Manufacturing Batch Records (MBRs)
• Material management
• Equipment and timer management
• Label management
• Lead MES design, configuration, testing, and troubleshooting
• Act as technical interface between MES, DCS (DeltaV), ERP, LIMS, and other shop-floor systems
• Support MBR migration from a legacy site
• Ensure alignment with site and global MES standards
• Support risk assessments and GMP compliance activities
• Provide hands-on troubleshooting and technical support during execution
• Develop and maintain MES technical documentation
• Collaborate closely with IT, Manufacturing, Quality, and Engineering teams

Required Qualifications

• 8+ years experience in pharmaceutical or biopharmaceutical manufacturing environments
• Strong hands-on experience with MES platforms, preferably Werum PAS-X
• Proven experience with MBR design and execution
• Solid understanding of GMP manufacturing processes
• Experience integrating MES with DCS (DeltaV) and enterprise systems
• Strong analytical, troubleshooting, and problem-solving skills
• Bachelor’s degree in Engineering, IT, Science, or related discipline

Preferred / Nice-to-Have Skills

• Programming experience: .NET, SQL / PL-SQL, Java
• Experience with OPC servers/clients
• Knowledge of 21 CFR Part 11 and EU GMP Annex 11
• Process knowledge across:
• Upstream
• Downstream
• Bioprocess support functions
• Ability to communicate effectively with both technical and non-technical stakeholders

Ideal Candidate Profile:

• Senior-level PAS-X MES SME
• Strong on-site presence and ownership mindset
• Comfortable operating as Owner’s Rep, not a junior configurator
• Deep pharma/biotech automation background
• Able to bridge Manufacturing, IT, Automation, and Quality

Automation CSV Engineer (Biotech/Pharma)

Location – California Bay Area

Please note: We are only considering W2 candidates at this time. Applications from third-party vendors or C2C arrangements will not be considered.

ADVENT Engineering is an engineering and consulting firm providing expertise to the pharmaceutical and biotechnology industries. Headquartered near San Francisco, California, and with operations in the Eastern and Western US, Canada and Singapore, our company is involved in almost every facet of global pharmaceutical and biotechnology facility design and process engineering and quality system projects.

ADVENT's services include process engineering, automation engineering, project engineering, facility/system design, start up and commissioning, validation and compliance consulting for distinguished and successful biotechnology and pharmaceutical manufacturing companies.

The successful candidate will work with a group of engineers involved in the design, automation, commissioning and start-up of various processes, systems and facilities. A combination of strong technical aptitude, automation engineering skills and technical writing are the desired skill set.

This is an outstanding opportunity to join our growing team!

Position Overview

We are seeking an experienced Sr. Automation CSV Engineer to support a complex automation system migration project at a large, regulated biotechnology/pharmaceutical manufacturing site in the California Bay area. The ideal candidate will bring deep, hands-on expertise in PCS and MES system migration, validation, and implementation, with a strong preference for experience in Rockwell and PharmaSuite environments.

This role requires a senior-level engineer capable of independently executing and leading CSV and automation activities while collaborating closely with cross-functional teams.

Key Responsibilities

• Lead and execute CSV and automation activities for PCS/MES system migration projects
• Support implementation, migration, commissioning, and validation of:
• PCS systems (Rockwell, Honeywell)
• MES systems (PharmaSuite, POMSnet)
• SCADA and PLC platforms
• Author, review, approve, and execute CSV lifecycle documentation, including:
• Validation Plans
• Risk Assessments
• Test Protocols (IQ/OQ/PQ)
• Traceability Matrices
• Validation Summary Reports
• Ensure compliance with SDLC, 21 CFR Part 11, Annex 11, Data Integrity, and GAMP 5
• Manage and document software changes throughout the SDLC per site procedures
• Support programming, configuration, commissioning, and validation of Rockwell and PharmaSuite platforms
• Collaborate with automation, IT, QA, and manufacturing teams
• Support troubleshooting, root cause analysis, and deviation investigations as needed
• Communicate effectively with stakeholders at all levels

Required Qualifications

• 8+ years of experience in CSV and Automation within a regulated biotech/pharma environment
• Hands-on experience with implementation, migration, and validation of:
• PCS (Rockwell and/or Honeywell)
• MES (PharmaSuite, POMSnet)
• SCADA/PLC systems
• Strong, hands-on expertise with Rockwell and PharmaSuite (required)
• In-depth knowledge of:
• SDLC
• 21 CFR Part 11 / Annex 11
• Data Integrity
• Computerized System Validation (CSV)
• Ability to work independently and collaboratively in team environments
• Excellent verbal and written communication skills

Preferred Qualifications

• Familiarity with S88 Batch Standard
• Experience with Rockwell software object development
• MES recipe authoring and testing experience
• Experience with Kneat

Additional Information

• This position requires 100% onsite support in California
• Long-term project opportunity in a regulated manufacturing environment

Location: On-site in Upstate NY (Relocation from Canada welcome!)

Please note: We are only considering W2 candidates at this time. Applications from third-party vendors or C2C arrangements will not be considered.

ADVENT Engineering is an engineering and consulting firm providing expertise to the pharmaceutical and biotechnology industries. Headquartered near San Francisco, California, and with operations in the Eastern and Western US, Canada and Singapore, our company is involved in almost every facet of global pharmaceutical and biotechnology facility design and process engineering and quality system projects.

ADVENT's services include process engineering, automation engineering, project engineering, facility/system design, start up and commissioning, validation and compliance consulting for distinguished and successful biotechnology and pharmaceutical manufacturing companies.

The successful candidate will work with a group of engineers involved in the design, automation, commissioning and start-up of various processes, systems and facilities. A combination of strong technical aptitude, automation engineering skills and technical writing are the desired skill set.

This is an outstanding opportunity to join our growing team!

Full-Time | Onsite

About the Role:

We are seeking a detail-oriented and technically proficient Process Engineer who will work with a group of engineers involved in the design, automation, commissioning and start-up of various processes, systems and facilities. A combination of strong technical aptitude, automation engineering skills and technical writing are the desired skill set.

Responsibilities

• Work with Upstream equipment
• Fermentation
• Process optimization
• Process scale-up or scale-down studies
• Commissioning and Qualification
• Protocol generation and execution
• Data analysis
• Report writing
• Author SOPs
• Great communication skills (presenting, and writing)
• Protein expression/purification
• GxP (GDP, GLP, or GMP a major asset)

Minimum Requirements

• Bachelor’s or master’s degree in Biochemistry, Biology, Mechanical Engineering, Chemical Engineering, Biochemical Engineering, or related discipline.
• Required: 3+ years of experience in the biotech-pharmaceutical academic or industrial environment.
• Bioprocess experience preferred
• Fill finish experience preferred
• Basic knowledge of upstream/downstream drug substance manufacturing.
• Basic knowledge of regulatory compliance inclusive of cGMP, OSHA, EPA, FDA regulations. Familiarity with ICH guidelines and EMA regulations is a plus.
• Basic technical writing with proficiency in Excel, PowerPoint, Visio, Word, Sharepoint, etc. in addition to experience working within shared work environments.
• Demonstrated experience with manufacturing processes and equipment such as CIP systems, bioreactors, filtration skids, chromatography and lyophilization equipment.
• Basic knowledge of the Commissioning and Qualification.
• Travel within USA as needed for the projects.

Perks & Benefits:

• Competitive salary
• Full health, dental, vision, and retirement benefits
• Tuition reimbursement, PTO, and more

Location: Anywhere in Country

At EY, we’re all in to shape your future with confidence.

We’ll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and help to build a better working world.

EY is seeking a motivated professional with solid experience in the utilities sector to serve as a Senior Manager who possesses a robust background in Data Architecture, Data Modernization, End to end Data capabilities, AI, Gen AI, Agentic AI, preferably with a power systems / electrical engineering background and having delivered business use cases in Transmission / Distribution / Generation / Customer. The ideal candidate will have a history of working for consulting companies and be well-versed in the fast-paced culture of consulting work. This role is dedicated to the utilities sector, where the successful candidate will craft, deploy, and maintain large-scale AI data ready architectures.

You will help our clients enable better business outcomes while working in the rapidly growing Power & Utilities sector. You will have the opportunity to lead and develop your skill set to keep up with the ever-growing demands of the modern data platform. During implementation you will solve complex analytical problems to bring data to insights and enable the use of ML and AI at scale for your clients. This is a high growth area and a high visibility role with plenty of opportunities to enhance your skillset and build your career.

As a Senior Manager in Data Architecture, you will have the opportunity to lead transformative technology projects and programs that align with our organizational strategy to achieve impactful outcomes. You will provide assurance to leadership by managing timelines, costs, and quality, and lead both technical and non-technical project teams in the development and implementation of cutting-edge technology solutions and infrastructure. You will have the opportunity to be face to face with external clients and build new and existing relationships in the sector. Your specialized knowledge in project and program delivery methods, including Agile and Waterfall, will be instrumental in coaching others and proposing solutions to technical constraints.

In this pivotal role, you will be responsible for the effective management and delivery of one or more processes, solutions, and projects, with a focus on quality and effective risk management. You will drive continuous process improvement and identify innovative solutions through research, analysis, and best practices. Managing professional employees or supervising team members to deliver complex technical initiatives, you will apply your depth of expertise to guide others and interpret internal/external issues to recommend quality solutions. Your responsibilities will include:

As Data Architect – Senior Manager, you will have an expert understanding of data architecture and data engineering and will be focused on problem-solving to design, architect, and present findings and solutions, leading more junior team members, and working with a wide variety of clients to sell and lead delivery of technology consulting services. You will be the go-to resource for understanding our clients’ problems and responding with appropriate methodologies and solutions anchored around data architectures, platforms, and technologies. You are responsible for helping to win new business for EY. You are a trusted advisor with a broad understanding of digital transformation initiatives, the analytic technology landscape, industry trends and client motivations. You are also a charismatic communicator and thought leader, capable of going toe-to-toe with the C-level in our clients and prospects and willing and able to constructively challenge them.

To thrive in this role, you will need a combination of technical and business skills that will make a significant impact. Your skills will include:

• 
  
• Technical Skills Applications Integration
  
• Cloud Computing and Cloud Computing Architecture
  
• Data Architecture Design and Modelling
  
• Data Integration and Data Quality
  
• AI/Agentic AI driven data operations
  
• Experience delivering business use cases in Transmission / Distribution / Generation / Customer.
  
• Strong relationship management and business development skills.
  
• Become a trusted advisor to your clients’ senior decision makers and internal EY teams by establishing credibility and expertise in both data strategy in general and in the use of analytic technology solutions to solve business problems.
  
• Engage with senior business leaders to understand and shape their goals and objectives and their corresponding information needs and analytic requirements.
  
• Collaborate with cross-functional teams (Data Scientists, Business Analysts, and IT teams) to define data requirements, design solutions, and implement data strategies that align with our clients’ objectives.
  
• Organize and lead workshops and design sessions with stakeholders, including clients, team members, and cross-functional partners, to capture requirements, understand use cases, personas, key business processes, brainstorm solutions, and align on data architecture strategies and projects.
  
• Lead the design and implementation of modern data architectures, supporting transactional, operational, analytical, and AI solutions.
  
• Direct and mentor global data architecture and engineering teams, fostering a culture of innovation, collaboration, and continuous improvement.
  
• Establish data governance policies and practices, including data security, quality, and lifecycle management.
  
• Stay abreast of industry trends and emerging technologies in data architecture and management, recommending innovations and improvements to enhance our capabilities.
  

• 
  
• A Bachelor’s degree required in STEM
  
• 12+ years professional consulting experience in industry or in technology consulting.
  
• 12+ years hands-on experience in architecting, designing, delivering or optimizing data lake solutions.
  
• 5+ years’ experience with native cloud products and services such as Azure or GCP.
  
• 8+ years of experience mentoring and leading teams of data architects and data engineers, fostering a culture of innovation and professional development.
  
• In-depth knowledge of data architecture principles and best practices, including data modelling, data warehousing, data lakes, and data integration.
  
• Demonstrated experience in leading large data engineering teams to design and build platforms with complex architectures and diverse features including various data flow patterns, relational and no-SQL databases, production-grade performance, and delivery to downstream use cases and applications.
  
• Hands-on experience in designing end-to-end architectures and pipelines that collect, process, and deliver data to its destination efficiently and reliably.
  
• Proficiency in data modelling techniques and the ability to choose appropriate architectural design patterns, including Data Fabrics, Data Mesh, Lake Houses, or Delta Lakes.
  
• Manage complex data analysis, migration, and integration of enterprise solutions to modern platforms, including code efficiency and performance optimizations.
  
• Previous hands‑on coding skills in languages commonly used in data engineering, such as Python, Java, or Scala.
  
• Ability to design data solutions that can scale horizontally and vertically while optimizing performance.
  
• Experience with containerization technologies like Docker and container orchestration platforms like Kubernetes for managing data workloads.
  
• Experience in version control systems (e.g. Git) and knowledge of DevOps practices for automating data engineering workflows (DataOps).
  
• Practical understanding of data encryption, access control, and security best practices to protect sensitive data.
  
• Experience leading Infrastructure and Security engineers and architects in overall platform build.
  
• Excellent leadership, communication, and project management skills.
  
• Data Security and Database Management
  
• Enterprise Data Management and Metadata Management
  
• Ontology Design and Systems Design
  

• 
  
• Master’s degree in Electrical / Power Systems Engineering, Computer science, Statistics, Applied Mathematics, Data Science, Machine Learning or commensurate professional experience.
  
• Experience working at big 4 or a major utility.
  
• Experience with cloud data platforms like Databricks.
  
• Experience in leading and influencing teams, with a focus on mentorship and professional development.
  
• A passion for innovation and the strategic application of emerging technologies to solve real-world challenges.
  
• The ability to foster an inclusive environment that values diverse perspectives and empowers team members.
  
• Building and Managing Relationships
  
• Client Trust and Value and Commercial Astuteness
  
• Communicating With Impact and Digital Fluency
  

We are looking for top performers who demonstrate a blend of technical expertise and business acumen, with the ability to build strong client relationships and lead teams through change. Emotional agility and hybrid collaboration skills are key to success in this dynamic role.

FY26NATAID

At EY, we’ll develop you with future-focused skills and equip you with world-class experiences. We’ll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more.

• 
  
• We offer a comprehensive compensation and benefits package where you’ll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $144,000 to $329,100. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $172,800 to $374,000. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options.
  
• Join us in our team‑led and leader‑enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the time over the course of an engagement, project or year.
  
• Under our flexible vacation policy, you’ll decide how much vacation time you need based on your own personal circumstances. You’ll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well‑being.
  

EY accepts applications for this position on an on‑going basis.

For those living in California, please click here for additional information.

EY focuses on high‑ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities.

EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets.

Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow.

EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories.

EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally protected basis, including arrest and conviction records, in accordance with applicable law.

EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY’s Talent Shared Services Team (TSS) or email the TSS at .

Mechanical Engineer

We are an award-winning and innovative multi-disciplinary engineering consulting firm, has several openings for HVAC Engineers in our San Francisco CA. We work closely with architects and owners from around the world on large, complex projects with a focus on sustainability and energy performance of the built environment.

About the Job

Our Engineers work on high quality, high-profile, national and international projects. You will actively participate in the full project cycle, from the design phase through the final construction close-out. We offer excellent growth opportunities:

Many of our senior leaders started out as young engineers in our firm.

Responsibilities include

Design of air distribution systems

Design of hydronic systems

Specification writing

Scheduling and selecting major equipment

Automatic temperature controls system design and specification

Cooling/heating load calculations

Construction administration

Assist with Project Management

Attend client meetings

Requirements

• Bachelor’s degree in Mechanical/HVAC Engineering
• 1-4 years experience designing mechanical systems for the built environment.
• Project experience submitted for consideration should include buildings on which you have actively participated in the project from the design phase through the final construction close-out.
• Experience of the design of HVAC systems and automatic temperature controls for a broad range of commercial systems.
• Strong working knowledge of building and energy codes
• Excellent verbal and written communication skills, with an emphasis on the ability to organize and present design information to clients.
• Special consideration will be given to those candidates who have successfully demonstrated innovative design experience specifically related to renewable energies and sustainable, high performing buildings.
• Revit experience is Highly preferred
• LEED AP is preferred

Full Benefits, 401K plan, Competitive salary, Vacation Package,

Immediate need for a talented Project Engineer I (Engineering). This is a 12+ Months contract opportunity with long-term potential and is located in Chattanooga, TN (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID: 26-05465

Pay Range: $25 - $35/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Perform all aspects of project engineering including design, procurement, construction management, installation, and qualification.
• Plan, establish budgets, develop complex schedules and coordinate resources to ensure delivery of scope, schedule, budget, and cash flow for all projects.
• Drive results in Engineering metrics and own the following (KPIs): Budget Adherence %, Cash Flow Adherence %, Vertical Startup Adherence %, Critical Success Factor Adherence %, Projects Submitted, Projects Approved, CAPEX $ Spent vs Annual Budget.
• Site liaison and team participant for projects that are being executed by non site-based engineering resources.
• Champion Early Equipment Management (EEM) program including optimization, maintenance, retirement, and Startup Management (SUM).
• Develops cost estimates and conceptual designs for new products, line extensions, and packaging operations.
• Develop standards for equipment, systems, and engineering processes for assigned functional area and collaborate with other global technical teams.
• Works with Operations and Maintenance teams to troubleshoot, modify, and improve packaging and processing equipment.
• Collaborates with Department Managers to improve productivity through process changes, equipment replacement, or additional equipment.
• Champion Safety objectives; strive for zero incidents and supports a people-centered safety culture within the maintenance and engineering teams.
• Provide leadership and coaching to continuously improve the effectiveness of the technical function.
• Strict adherence to Company and OSHA safety requirements, Standard Operating Procedures (SOP’s), Good Manufacturing Practices (GMP) Compliance, and Food and Drug Administration (FDA) regulatory standards.
• Maintain compliance with all state and federal regulations.
• Support reduction in environmental impacts across all sites, including energy savings and utility monitoring.
• Establish and maintain constant communication across all levels of the organization.

Key Requirements and Technology Experience:

• Key skills; Project engineering including design, procurement, construction management, installation, and qualification.
• 2D/3D CAD experience (AutoCAD or Solidworks) and drawing development.
• 2+ years of project management, process design, manufacturing, and contractor supervision
• Bachelor's degree in engineering (Electrical, Mechanical, or Chemical)
• Project Management Professional Certification
• Professional Engineer Certification
• 2+ years of project management, process design, manufacturing, and contractor supervision.
• Must be well rounded with a solid grasp of many engineering disciplines as well as plant operations and construction.
• Proven track record developing and executing major, complex projects (over $1MM).
• Experience with technical writing via establishing Work Instructions, SOPs, and OPLs
• Mechanical aptitude & Critical Thinking Skills.
• Ability to read and understand engineering drawings and technical documentation
• Excellent written and oral communication skills; able to connect with all levels of the organization.
• Expert planning, organization, and time management skills.
• Required Competencies: Drive for Results, Action Orientation, Command Skills, Functional/Technical Skills, Priority Setting, Planning, Managing and Measuring Work, Process Management, Problem Solving, Decision Quality, Customer Focus, Integrity and Trust, Listening, Peer Relationships, Directing Others, and Comfort Around Higher Management
• Experience in Food or Pharma manufacturing following FDA regulations is preferred.
• Experience with site utilities, such as chillers, boilers, air compressors, etc. is preferred.
• Strong emphasis on sustainability and carbon reduction projects is preferred.
• Proficiency in reading, creating, and modifying P&IDs is preferred.

Our client is a leading Pharmaceuticals Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.

To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG’s Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm’s application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00 

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children

• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs

• Dental coverage, including up to $5,000 in orthodontia benefits

• Vision insurance with coverage for both glasses and contact lenses annually

• Reimbursement for gym memberships and other fitness activities

• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan

• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement

• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)

• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

BCG is an E - Verify Employer. Click here for more information on E-Verify.

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.
To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG's Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm's application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children
• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs
• Dental coverage, including up to $5,000 in orthodontia benefits
• Vision insurance with coverage for both glasses and contact lenses annually
• Reimbursement for gym memberships and other fitness activities
• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan
• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement
• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)
• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.
BCG is an E - Verify Employer. Click here for more information on E-Verify.

Our client is seeking an Application Engineer to join their team on-site in Denver, CO. This role is responsible for reviewing customer technical requirements and recommending appropriate product and system solutions to meet operational needs.

The Application Engineer partners closely with the sales team on technical matters, estimates project costs, and ensures proposed solutions integrate seamlessly with existing systems and equipment. This position also collaborates cross-functionally with engineering and operations teams to troubleshoot and resolve issues during and after implementation.

Key Responsibilities:

• Support and resolve customer technical inquiries via phone, email, webchat, and Teams
• Recommend and promote appropriate product solutions based on customer applications
• Provide technical consultation to sales teams to ensure accurate and effective solutions
• Assist with cost estimation and system integration planning
• Identify opportunities to improve customer support processes
• Develop digital technical support materials and documentation for online customer use
• Perform customer service-related tasks such as quoting, order entry, stock checks, and invoicing when needed to streamline the customer experience
• Develop expertise within complex product lines and evolving controls technologies

Qualifications:

• Associate degree in a technical field required; Bachelor’s degree in Engineering (Mechanical, Electrical, or related) strongly preferred
• Experience working with sensors, controls, or industrial automation systems in a manufacturing or related environment
• Background in machine repair or industrial equipment maintenance is a plus
• Ability to quickly learn and apply advanced sensors and controls technologies
• 3+ years of technical support or application engineering experience preferred
• Strong verbal and written communication skills
• Comfortable in a customer-facing, cross-functional environment

EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status or other status protected by law

Senior Mechanical Engineer / Project Manager – Healthcare (MEP)

Key Responsibilities:

• Lead mechanical/HVAC healthcare projects from design through execution
• Manage project teams, budgets, schedules, and QA/QC reviews
• Perform HVAC load calculations, energy modeling, and engineering analysis
• Develop construction documents (HVAC, plumbing, fire protection, electrical/IT)
• Ensure compliance with NFPA, FGI, Joint Commission, and AHJ codes
• Provide client coordination, proposal support, and field construction assistance

Required Qualifications:

• 10+ years in healthcare or laboratory MEP engineering
• Strong HVAC design & multi-discipline coordination experience
• Proficiency in AutoCAD, Revit, and energy modeling tools (eQUEST, Trane Trace, Carrier HAP)
• Excellent project management, leadership, and communication skills
• Professional Engineer (PE) License – Required

Preferred:

• Master’s degree in Engineering
• LEED knowledge/USGBC experience
• Experience in pharma, biotech, or medical device facilities

Industry: Healthcare Engineering / MEP Consulting

Core Skills: HVAC Design | Mechanical Engineering | Project Management | QA/QC | Energy Modeling | Healthcare Facilities Design

BEPC Inc. provides Specialized Engineering Solutions and IT Project Management services to Fortune 500 companies in the Life Science and Technology industries. BEPC Mexico, a division of BEPC Incorporated, provides and manages consulting services for Automotive and Medical device companies throughout Mexico and around the globe.

The Senior Automation & Controls Engineer is responsible for leading the design, development, implementation, validation, and continuous improvement of automated equipment and control systems. This role combines strong technical expertise in PLC-based automation, electrical and pneumatic systems, equipment validation, and project leadership within regulated manufacturing environments, preferably in the medical device industry.

KEY RESPONSABILITIES:

• Lead and manage electrical and control system projects, ensuring alignment with scope, budget, and schedule.
• Design, develop, program, and troubleshoot PLC-based control systems (Allen-Bradley, Siemens, Keyence, Beckhoff, Schneider).
• Develop and implement HMI/SCADA applications (FactoryTalk View, Aveva Edge, Ignition, TIA Portal, etc.).
• Integrate VFDs, servo systems, motion control, robots (e.g., Mitsubishi), and machine vision systems (Cognex, Keyence, DataMan).
• Participate in the design and implementation of new automated equipment and capacity expansion projects.
• Execute and oversee Factory Acceptance Tests (FAT), User Acceptance Tests (UAT/BUAT), and internal testing activities.
• Lead and support equipment validation activities (IQ, OQ, PQ) in compliance with FDA and ISO 13485 standards.
• Ensure proper integration with Manufacturing Execution Systems (MES) and Warehouse Control Systems (WCS), when applicable.
• Generate and maintain technical documentation, including BOMs, electrical schematics, panel layouts, validation protocols, and reports.
• Perform advanced troubleshooting of electrical, pneumatic, mechanical, and control systems.
• Oversee preventive and corrective maintenance strategies to improve equipment reliability and efficiency.
• Collaborate cross-functionally with Manufacturing, Quality, R&D, Maintenance, and external stakeholders.
• Provide technical leadership, delegate tasks effectively, and mentor junior engineers and technicians.
• Support continuous improvement initiatives focused on efficiency, safety, and process optimization.
• Ensure compliance with safety and regulatory requirements in regulated manufacturing environments.

QUALIFICATIONS:

• Bachelor’s degree in electrical engineering, Mechatronics, Automation, Mechanical Engineering, or related field.
• 7+ years of experience in industrial automation and controls engineering.
• Strong expertise in PLC programming (Allen-Bradley, Siemens; others desirable).
• Advanced knowledge of electrical controls, schematics, and pneumatic systems.
• Experience with servo systems, VFDs, motion control, and robotics integration.
• Experience in executing FAT, UAT, and equipment validation (IQ/OQ/PQ).
• Proficiency in AutoCAD / AutoCAD Electrical.
• Strong troubleshooting skills in automation and manufacturing systems.
• Ability to manage multiple concurrent projects.
• Upper-intermediate to advanced English proficiency (written and spoken).
• Availability to work on a 2–3 month fixed-term contract.
• Authorized to work in the location where the position is posted. Be a U.S. Citizen, Permanent Resident, or hold a valid TN Visa.

PREFERRED QUALIFICATIONS:

• Strong project planning, budgeting, and stakeholder communication skills.
• Experience in warehouse automation, material handling, or the post/parcel sector.
• Knowledge of networking protocols (Ethernet/IP, Profinet, Serial).
• 3+ years of experience in regulated environments (medical device preferred).
• Experience with MES/WCS integration.
• Familiarity with FDA regulations and ISO 13485.

Marca Technologies / Design Engineer / Gorham, Maine

We are working with our client Marca Technologies, a division of Spartek, in seeking a Design Engineer, to be based On-Site in the Gorham Maine facility. The Design Engineer should have a passion for automation and robotics and want to push boundaries and build next-gen solutions right here in Gorham, Maine.

Requirements of the Design Engineer:

• A degree in Mechanical Engineering, Mechatronics, Automation Engineering, or a related field
• SOLID WORKS
• Experience with robotics, motion systems, or automated machinery (industrial robots, conveyors, actuators, PLC-driven systems, etc.)
• Proficiency in 3D CAD
• Experience with Mastercam
• A creative engineering mindset with the ability to turn concepts into real, robust solutions
• Strong teamwork and communication skills—your ideas matter, and so does how you share them
• Flexibility to support equipment in house as well as design.

Benefits of the Job:

• Salary depends on experience.
• On-Site, Monday – Friday 7am – 3:30pm
• Health, Dental
• HRA
• Long Term/Short Term, Life Insurance
• Paid Time Off based on accrual
• Paid Holidays including Christmas and New Years Eve
• Employee appreciation: lunches, pizza and donuts as well as Christmas gifts for employees
• Easy to get to any location, just a few miles from I95.

Responsibilities of the Design Engineer:

• Design, develop, and refine automated systems and robotic equipment for advanced manufacturing applications
• Collaborate with cross-functional teams—controls, mechanical, electrical, and production—to bring creative engineering concepts to life
• Prototype and iterate on new mechanisms, assemblies, and tooling that improve performance and throughput
• Dive into continuous improvement initiatives, identifying opportunities to automate processes and reduce bottlenecks
• Support equipment commissioning, system troubleshooting, and optimization on the production floor
• Work hands-on with emerging technologies and cutting-edge automation platforms
• Be part of a forward-thinking engineering culture that encourages experimentation and ingenuity
• Work on high-impact projects in a growing company investing heavily in automation

Marca Technologies, founded in 1864 as Knowlton Machine, has been a legacy of industrial excellence. From developing cutting-edge pioneering turbine water wheels to revolutionizing vacuum metalizing technologies, their rich history is built on innovation and precision. Today, as part of Spartek, Inc., a global leader in manufacturing solutions, Marca continues to push boundaries in manufacturing, combining advanced technology with in-house expertise to deliver unmatched results.

At Marca Technologies, they pride themselves on being a trusted manufacturing partner, providing tailored solutions that drive our customers’ efficiency, quality, and business growth.

SkillCloud HCM Solutions has been engaged to manage this search. NO PHONE CALLS OR RECRUITERS PLEASE

Marca Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, ancestry, familial status, age, physical or mental disability, pregnancy, sexual orientation, gender identity, genetic information, veteran status, or any other characteristic protected by law.

On-Site Quality Engineer in Albany, NY

ADVENT Engineering, a Trinity Consultants Company, is an engineering and consulting firm providing expertise to the pharmaceutical and biotechnology industries. Head-quartered in Dallas, TX with operations in the Eastern US and Canada, our company is involved in almost every facet of global pharmaceutical and biotechnology facility design and process engineering and quality system projects.

ADVENT's services include process engineering, automation engineering, project engineering, facility/system design, start up and commissioning, validation and compliance consulting for distinguished and successful biotechnology and pharmaceutical manufacturing companies.

The successful candidate will work with a group of Compliance Specialists involved in the creation, tracking, and closure of CAPAs associated with facilities maintenance. Forming and working within cross functional teams is considered an asset.

A combination of strong technical aptitude, preventative maintenance experience, and data analysis are the desired skill set.

This is an outstanding opportunity to join our growing team!

Qualifications:

Bachelor’s Degree/Undergraduate degree in Engineering, Biology, or equivalent. At least 5 years of related work experience in a QA or Compliance setting.

Requirements:

• Acts as a liaison between the Facilities Department and onsite quality and regulatory groups to implement Corrective and Preventative Actions
• Manages and participates in Facilities Department CAPA Program. Ensures that all activities related to CAPAs are performed in a timely manner and in compliance with procedures and regulatory requirements.
• Daily monitoring and tracking of CAPAs assigned to the facilities department.
• Responsible for all aspects of CAPA ownership including facilitation of cross functional meetings with relevant stakeholders, completion of extension requests where applicable, and submission of evidence to QA.
• Initiation and ownership of requests and workflows in Computerized Maintenance Management System (BMRAM)
• Attend Weekly Meetings to discuss CAPA progress and escalation of obstacles, including presenting, taking notes, managing agenda items and invites.
• Ownership of CAPA Effectiveness Checks including the review and analyzing of relevant data and completing reports documenting findings
• Provides support and training for Facilities personnel on regulatory and quality topics, such as proper documentation procedures and the use of QUMAS.

Key responsibilities:

• Well-developed communication skills, both verbal and written.
• Outstanding Organization skills (required to handle multiple projects concurrently)
• Strong data analysis skills (excel, performance metrics).
• Strong GMP background including working knowledge of preventative maintenance principles.
• Familiar with a broad range of equipment used in pharmaceutical production, including but not limited to: bioreactors, chromatography skids, centrifuges/separators, air handlers, HEPA.

We are seeking a skilled Electrical MEP Engineer with 2–5 years of experience in building systems design to join our growing team. This role will support the design and coordination of electrical systems for commercial, healthcare, institutional, and light industrial projects.

Responsibilities:

• Design power distribution systems, lighting, grounding, and low-voltage systems in accordance with NEC and local codes
• Develop electrical drawings, specifications, and calculations
• Perform load studies, short circuit, and voltage drop calculations
• Coordinate with mechanical, plumbing, civil, and architectural teams
• Participate in client meetings and design review discussions
• Conduct field visits and assist with construction administration support
• Review shop drawings and respond to RFIs

Qualifications:

• Bachelor’s degree in Electrical Engineering
• 2–5 years of experience in MEP consulting
• EIT preferred
• PE license or ability to obtain preferred
• Proficiency in Revit and AutoCAD
• Strong understanding of NEC and building codes
• Excellent communication and coordination skills

We’re looking for a detail-oriented engineer who can take ownership of design tasks while collaborating effectively within a multidisciplinary team. This is an excellent opportunity to grow into increased technical and client-facing responsibilities.

Immediate need for a talented Engineer I. This is a 09+months contract opportunity with long-term potential and is located in Skaneateles, NY (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID:26-07515

Pay Range: $35 - $37/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Test Protocol Development: Design and develop detailed test protocols for medical device with embedded firmware.
• Test Execution: Execute test plans, including functional, integration, system, and performance testing, to validate software functionality and performance against specifications.
• Defect Identification and Reporting: Identify, document, and track software defects and inconsistencies.
• Collaborate with the development team to reproduce and troubleshoot issues effectively.
• Collaboration: Work closely with cross-functional teams, including software developers, product managers, and clinical stakeholders, to ensure comprehensive understanding and testing of software requirements.
• Documentation: Create and maintain detailed test documentation, including test plans, test cases, test reports, and defect logs.
• Ensure all documentation is clear, concise, and accessible

Key Requirements and Technology Experience:

• Key skills; Quality, ISO and medical device
• Bachelor’s degree in Computer Science, Software Engineering, or a related field. Certifications in software testing or quality assurance are a plus.
• Experience: Minimum of 3-5 years of experience in software testing, preferably in the medical device or healthcare industry.
• Familiarity with imaging systems or medical cameras is highly desirable.
• Technical Skills: Understanding of software testing methodologies, including black-box, white-box, and performance testing.

Our client is a leading Healthcare Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration.

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.