Engineering Journal Impact Factor Jobs in Memphis
206 positions found — Page 2
Debug Technician
✦ New
Salary not disclosed
Title: Debug Technician
Location: Memphis, TN
Shift: Monday – Friday, 1st Shift (40 hours per week with occasional overtime)
Pay: $35/hr
Position Overview
We are seeking an experienced Debug Technician to perform advanced board-level troubleshooting and component-level diagnostics on complex server and data center hardware. This role supports the repair and analysis of multilayer PCB assemblies used in high-performance computing environments. The ideal candidate will have strong experience working with server-class electronics and the ability to diagnose complex hardware issues using advanced test equipment and engineering documentation.
Key Responsibilities
• Perform advanced board-level troubleshooting and component-level debug on complex multilayer PCB assemblies used in server and data center hardware.
• Diagnose issues within high-speed digital, power distribution, and mixed-signal circuits using schematics, PCB layout files, POST codes, BIOS logs, boundary scan tools, and diagnostic utilities.
• Utilize advanced electronic test equipment including oscilloscopes, logic analyzers, protocol analyzers, power analyzers, spectrum analyzers, and automated test platforms.
• Execute precision rework and debugging of fine-pitch and large-body BGA components using controlled thermal profiles, X-ray verification, and industry-standard rework techniques.
• Conduct root cause failure analysis to identify recurring failure modes and support corrective and preventive actions.
• Collaborate with engineering teams to resolve hardware functionality issues, refine debugging methodologies, and improve repair processes.
• Develop and maintain detailed debug guides, troubleshooting flowcharts, and repair documentation to standardize diagnostic processes.
• Track yield performance, repair cycle times, and failure trends to support continuous improvement initiatives.
• Assist with installation, validation, and optimization of advanced test and rework equipment.
• Ensure strict adherence to ESD, safety, and quality standards when handling sensitive electronic components.
• Provide technical guidance and mentorship to junior technicians to improve team capability and consistency.
Preferred Qualifications
• 5+ years of experience in enterprise server, storage, or networking hardware repair.
• Strong understanding of server power architecture, VRM design, and high-speed signal integrity fundamentals.
• Experience troubleshooting DDR memory, PCIe interfaces, and other high-speed interconnect technologies.
• Ability to read and interpret complex electronic schematics and PCB layout files.
• Hands-on experience with advanced electronic test and diagnostic equipment.
Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Not Specified
B
Writer/Journalist Internship
Salary not disclosed
Are you passionate about making a difference in the world?
Look no further!
The Borgen Project is an international organization that works at the political level to improve living conditions for people impacted by war, famine and poverty.
With 20 years of experience in the advocacy space, The Borgen Project has worked to support the passage of numerous bills that have benefitted close to 500 million people in developing countries.
Writer/Journalist Internship: The role is focused on content creation for BORGEN Magazine or The Borgen Project Blog . This is a part-time 12-hours per week, 12 week, unpaid remote internship. If your availability is limited, you can work ahead and complete the program in fewer weeks.
.
Responsibilities will include:
Article writing.
Researching topics.
Assisting with The Borgen Project's advocacy efforts.
Assisting with fundraising. Create a personal fundraising campaign and meet targets.
Experience:
No prior experience is necessary, we're looking for people who are passionate about fighting poverty and righting wrongs, regardless of your GPAs/background.
Details:
This is an unpaid internship, although college credit is available.
Start Date:
New programs begin every month, you choose the month you wish to start.
Look no further!
The Borgen Project is an international organization that works at the political level to improve living conditions for people impacted by war, famine and poverty.
With 20 years of experience in the advocacy space, The Borgen Project has worked to support the passage of numerous bills that have benefitted close to 500 million people in developing countries.
Writer/Journalist Internship: The role is focused on content creation for BORGEN Magazine or The Borgen Project Blog . This is a part-time 12-hours per week, 12 week, unpaid remote internship. If your availability is limited, you can work ahead and complete the program in fewer weeks.
.
Responsibilities will include:
Article writing.
Researching topics.
Assisting with The Borgen Project's advocacy efforts.
Assisting with fundraising. Create a personal fundraising campaign and meet targets.
Experience:
No prior experience is necessary, we're looking for people who are passionate about fighting poverty and righting wrongs, regardless of your GPAs/background.
Details:
This is an unpaid internship, although college credit is available.
Start Date:
New programs begin every month, you choose the month you wish to start.
internship
Quality Engineer (MEMPHIS)
Salary not disclosed
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Ensure capability studies are performed on critical processes.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
temporary
Quality Engineer
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
To assist the Quality Assurance function as technical support in issues affecting manufacturing. To support and drive corrective action efforts.
· Perform first article inspection and review visual aids.
· Perform defect analysis reporting.
· Perform MRB on sustained products.
· Participate in CAC meetings – support continuous improvement.
· Perform line and product audits.
· Assist Quality Engineering in APQP.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS
Bachelor's degree preferred; or equivalent combination of education and experience.
permanent
K
Healthcare Provider
Salary not disclosed
Physicians, NPs, and PAs Needed – Veteran Disability Evaluations
Travel, Per Diem, and In-Office Opportunities!
Kelly Government Solutions is seeking compassionate, detail-oriented providers—MDs, DOs, NPs, and PAs*—to perform disability evaluations for U.S. veterans. Make a meaningful impact and earn up to $4,500/week while helping our nation’s heroes access the benefits they’ve earned.
Positions Available
- Travel: Full-time, monthly-scheduled travel to various cities. Flexible: update your monthly availability and work when you want!
- Per Diem: Work 1-5 days/week at any eligible location.
- In-Office: Evaluate veterans in your existing ADA-compliant office (within 50 miles of a listed location, worker’s comp insurance required). Great for clinics—multiple providers can contract under one business entity!
Eligible Locations (ADA office or travel coverage needed):
Milwaukee, Madison, Minneapolis, Novice, Colorado Springs, Omaha, Wichita, Green Bay, Des Moines, Austin, Corpus Christi, Tulsa, Cedar Rapids, Oklahoma City, Sioux Falls, Amarillo, Fort Collins, Denver, Lincoln, Brownsville, Midland, Duluth, Lubbock, Wichita Falls, Casper, Killeen, North Platte
Applicants for per diem and office positions must reside or maintain an office within 50 miles of the listed locations
Who Can Apply?
- MDs, DOs, NPs, and PAs (NPs and PAs must be eligible for autonomous practice in that state)
- Specialties: Family Medicine, Internal Medicine, PM&R (Physical Medicine & Rehabilitation) strongly preferred; other specialties with strong diagnostic/assessment skillsets considered!
Job Overview
- Perform 1:1, in-person disability evaluations for veterans (no telemedicine).
- Assess if a veteran’s injury/condition is “more likely than not” service-related (the VA makes the final disability determination).
- No ongoing care, no prescribing, no long-term follow-up—focus on high-quality, objective assessments.
- Quick, straightforward onboarding and scheduling.
- Flexible for independent providers and clinics alike.
Compensation and Perks
- Earn up to $4,500/week (direct deposit; clinics can be paid through one business entity)
- Reliable, self-selected scheduling (travel and local opportunities)
- All travel and logistics handled for mobile roles
- Help veterans and supplement your income—great for filling open days or expanding your clinic’s offerings
Minimum Requirements
- Unrestricted state license (free from discipline)
- Active LLC or business entity (or willingness to set one up)
- Individual malpractice insurance for each provider (not supplied by KGS)
- For office-based work: ADA-compliant office within 50 miles of at least one listed location and worker’s comp insurance
- Ability to complete documentation electronically
- For travel roles: minimum of 3 days of availability - prefer full-time.
Easy Application Process
- Submit your resume to
- Quick 5-minute recruiter call
- Upload a few required documents
- Complete self-guided training
- Start seeing veterans, upload completed evaluations, and get paid directly!
*NPs and PAs may only apply for locations and roles where autonomous practice is permitted by state law.
Ready to make a difference in the lives of veterans and grow your income?
Start the approval process today by sending your resume to
Not Specified
Electronics Testing Analyst (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
temporary
Quality Assurance Specialist (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
temporary
Electrical Engineer (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How will you make an impact?
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
temporary
Electrical Engineer - Opportunities for cross-functional team collaboration (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How will you make an impact?
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
temporary
Electronic Design Specialist (MEMPHIS)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
How will you make an impact?
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
Familiar with technologies specific to area of competence. Can convey technical solutions for areas of competence both to other engineers and to business personnel. Work with engineering team to develop final product solution for chosen architecture within time and cost constraints.
What will you do?
- Assist Senior or Lead Design Engineer in the Development and utilization of processes for Electrical Hardware requirement analysis and documentation, Design documentation and requirements management.
- Assist Senior or Lead Design Engineer in providing Document Control with a complete design package consisting of requirements and design documentation, schematics, BOM’s, vendor lists, and conceptual packaging and assembly drawings prior to production launch.
- Participate in elements of design engineering including design reviews and design verification.
- Follow engineering department design flow processes and procedures.
- Provide input to identification and mitigation of technical project risks, technical and integration dependencies affecting overall project plans and schedules.
- Support production discrepancies by incorporating fixes into subsequent revisions in a timely manner.
- · Assigned to projects of diverse scope, where analysis of situations or data requires an evaluation of identifiable factors.
- Comply and follow all procedures within the company security and safety policies
- May perform other duties and responsibilities as assigned.
How will you get here?
Education:
Bachelor's degree in electrical engineering or related degree or an equivalent combination of educa
Experience:
- 2-5 years of electrical engineering in manufacturing.
- Ability to read, interpret, and execute schematics
- Must be able to lead techs and manufacturing personal
- Strong communication and training skills
- Must have experience electrical concepts such as wiring layouts, electrical design
- AutoCAD or SolidWorks
Knowledge, Skills, Abilities:
- Solid understanding or experience of electronics and circuit design.
- Solid understanding or experience of microprocessors and general digital design.
- Ability to learn high speed circuit board design, design for manufacturability, and performing timing analysis for logic design.
- Familiar or experience with FPGA and CPLDs using VHDL.
- Familiar or experience in schematic entry ECAD tools.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to operate a personal computer including using a Windows based operating system and related software.
- Advanced PC skills, including training and knowledge of Jabil’s software packages.
- Ability to write simple correspondence. Read and understand visual aid.
- Ability to apply common sense understanding to carry out simple one- or two-step instructions.
- Ability to deal with standardized situations with only occasional or no variables.
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret graphs
What can Jabil offer you?
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Apply Today!
temporary
jobs by
✓ All jobs loaded