Engineering Journal Elsevier Jobs in Suffield, CT

Job Summary:

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team.

This role is 100% in office at our plant in East Hartford, CT.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO Package
• Paid Company Holidays
• 401K Match Program
• Medical, Dental, Vision Benefits
• Tuition Reimbursement/Assistance Program

Essential Job Duties:

• Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies.
• Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs.
• Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives.
• Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed.
• Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure.
• Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary.
• Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team.
• Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery.
• Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality.

Experience & Skills:

• Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred.
• Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies.
• Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift.
• Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred.
• A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team.
• High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes.
• Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc.
• Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus.

Physical Demands:

Legend

N (Not applicable)

Activity is not applicable to this position

O (Occasionally)

Position requires this activity up to 33% of the time (0-2.5 hours/day)

F (Frequently)

Position requires this activity up to 66% of the time (2.5-5.5 hours/day)

C (Constantly)

Position requires this activity more than 66% of the time (5.5+ hours/day)

Lift/Carry 10-30lbs

F

Stand

F

Walk

F

Manually manipulate

F

Squat or kneel

O

Bend

O

Reach above shoulder

O

PIcdef49d468

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now

Our Program and Construction Management division has an immediate need for a temporary Clerk/Site Manager in Springfield, MA. 

Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again.

Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients.  LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ.

• Monitor construction quality and progress
• Daily & Weekly reports, conduct job meetings and minutes 
• Measure T&M
• Review Payment requisitions
• Change orders
• Job photos
• Filing 

• 5 years experience minimum
• CSL, CMAA, RA or PE is a plus
• OSHA 10
• Pass CORI

Our Culture:
We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential.

-We offer a comprehensive benefits package and a positive work environment

-Compensation: Min: $45.00/HR; Max: $60/HR. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position.

-Exact compensation will be determined on the individual candidates’ qualifications and location.

-The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. 

LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability.

#ID22

#ZR22

PId9dd4dddaf58-3631

The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping.

Essential Duties & Responsibilities:

Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements.

• 
  
• Read and understand complex engineering drawings to determine dimensions and tolerance specifications.
  
• Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process
  
• Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred
  
• Strong understanding of units of measure and applicability to GD&T principles
  
• Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail.
  
• Strong professional ethics combined with the ability to function well on teams.
  

• 
  
• Experience in aerospace manufacturing or similarly regulated industry preferred.
  
• Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections
  
• High School Diploma or GED
  
• Knowledgeable of MS Word, and Excel
  
• Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)
  
• Familiarity with operation/programming of FARO arm preferred
  

This position is currently accepting applications.

Apply Now

TruGreen accepts applications on an ongoing basis.

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.

• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).

• Responsible for accurately documenting all repairs in an electronic maintenance management system.

• Maintain parts inventory and work area in clean and orderly fashion.

• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.

• Develops and executes preventative maintenance programs.

• Prepares and manages maintenance budget.

• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.

• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).

• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.

• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.

• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

• Attention to detail.

• Verbal and written communication skills.

• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk

• Use hands and arms to handle, feel or reach

• Speak and hear

• Use close vision abilities

• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs

• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

 

Noise level

• Low to moderate
  
   

Adverse Conditions

• Minimal

Ability to speak, read and write fluently in English is required.

You MUST BE physically located in the United States while performing this job.

TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate’s skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee’s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks.

TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.
 
We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit   EEOC/EEO | TruGreen ( ).

 

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

TruGreen accepts applications on an ongoing basis.

Job Description

TruGreen is committed to providing personalized attention for our associates. We focus on developing our people by building proud, dynamic teams while helping associates reach their personal and professional goals. We continuously strive to make TruGreen an employer of choice and "a great place to work!"

Position Overview

Performs scheduled and preventative maintenance to production equipment, fleet vehicles and specialized equipment. Repairs equipment and orders parts as necessary. Maintains service/repair records.

Responsibilities

• Diagnoses and repairs fleet vehicle chassis and specialized vehicle back-end tank, pump and spray systems.
• Diagnoses and repairs tractors, forklifts, small engines and specialized equipment (aerators, seeders, spreaders, etc.).
• Responsible for accurately documenting all repairs in an electronic maintenance management system.
• Maintain parts inventory and work area in clean and orderly fashion.
• Arranges, follows up and documents outsourced maintenance performed by vendors and local service providers.
• Develops and executes preventative maintenance programs.
• Prepares and manages maintenance budget.
• Responds to vehicle and equipment breakdowns in field as needed/required.

Education and Experience Requirements

• High school diploma or general education degree (GED) and 1-4 years automotive mechanic experience required or equivalent combination of education and experience

Knowledge, Skills, and Abilities

• Ability to operate independently and collaboratively within a team.
• Computer skills with Microsoft Office applications (Word, Excel, Outlook, Internet Explorer, etc.).
• Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Ability to write routine reports and correspondence.
• Mathematical skills to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• Attention to detail.
• Verbal and written communication skills.
• Time management and organizational skills, including punctuality for on-time attendance.

Physical Demands & Working Conditions

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Regularly required to:

• Sit, stand and walk
• Use hands and arms to handle, feel or reach
• Speak and hear
• Use close vision abilities
• Operate a vehicle with a valid drivers license

Occasionally required to:

• Lift or move up to 50 lbs
• Stoop, kneel, crouch or crawl

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
 

Noise level

• Low to moderate
    Adverse Conditions
  • Minimal
  Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.

Pay Ranges

 
California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.

Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.

Essential Duties & Responsibilities:

• 
  
• Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
  
• Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
  
• Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
  
• Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
  
• Performs other work as assigned by the supervisor.
  

• Ability to lift or transfer components or objects of no more than 50 pounds.
• Understand and follow written and oral instructions in English and possess basic mathematical skills.
• Ability to read and interpret blueprints and assist in tooling and process development.
• Considerable ability to use a variety of hand and pneumatic tools.
• Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
• Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
• Proficiently interacts with other employees and possess good interpersonal skills.

Education & Experience Required:

• High School diploma or GED
• 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.

Working Conditions:

Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

This position is currently accepting applications.

Apply Now

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc and/or Okuma Controls
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PI629cfb2ee342-26289-39815000

At HORST we offer a variety of benefits including but not limited to:

• Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program

Major Areas of Responsibility:

Requirements:

• High School diploma or equivalent. Technical school training a plus.
• 3 years of set-up experience minimum required
• Experience with aerospace products and/or other close tolerance parts is a plus.
• Must be familiar with Fanuc controls.
• Must be able to set and change tools.
• Must be able to use standard gauges and inspection techniques.
• Experience with SPC, inspection documentation, and problem solving is a plus.
• Strong interpersonal and analytical skills.
• Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
• Must be able to read CNC programs.
• Five plus years of increasingly diverse experience in a machine shop or CNC machining environment

Physical Requirements:

• Ability to push/pull/carry up to 50 lbs.
• Able to stand for up to 8+ hours.

PIaf5bf2804d83-26289-39677110