Engineering Jobs Remote Jobs in Pasadena Ca Remote

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

*This role is currently based in Commerce, CA.

Cross Brothers Manufacturing

Company Overview

Cross Brothers Manufacturing is a rapidly growing fabrication and electrical infrastructure manufacturing company serving utilities, OEMs, and electrical contractors across the Western United States. The company is a portfolio investment of TBG Equity, a private investment firm focused on building and scaling industrial and infrastructure manufacturing businesses.

Our products support the expansion of the electrical grid and industrial infrastructure, including utility structures, enclosures, and custom fabricated components.

Demand for our products is increasing as electrification, AI infrastructure, and data center growth drive massive expansion of the electrical grid.

We encourage candidates who enjoy solving operational problems and building systems in fast-growing environments to apply.

Benefits & Perks

·      Fully paid medical benefits

·      401k matching

·      Generous Paid Time Off and Holidays

Compensation & Growth Path

·      Base salary expected to be in the range of $100,000 – $130,000, depending on experience.

·      This role is also eligible for performance bonuses tied to operational improvements and company growth.

·      Cross Brothers leadership participates in a shared bonus pool tied to company performance, which this role will have the opportunity to join as responsibilities expand.

·      As the company grows, this position is expected to evolve into Director of Operations, with responsibility for broader operational leadership.

·      Top performers may also have the opportunity to participate in long-term incentive programs, including potential equity participation, as the company scales.

About the Position – Operations & Systems Manager

Cross Brothers is entering a rapid growth phase as demand for electrical infrastructure equipment accelerates across the United States.

The company is currently expanding production capacity, launching a second shift, and preparing for a facility relocation to support continued growth.

This role offers a rare opportunity to help build the operational foundation of a growing manufacturing platform, working directly with leadership to improve manufacturing systems, implement new technology, and scale production capacity.

The successful candidate will play a key role in helping the company evolve from a traditional fabrication shop into a modern, data-driven manufacturing organization while working closely with leadership to shape how the business scales operationally.

Role Mission

The Operations & Systems Manager will help transform Cross Brothers from a traditional fabrication shop into a scalable, data-driven manufacturing platform.

This role will work directly with the CEO and leadership team to build operational systems, improve shop-floor processes, implement automation and AI tools, and support the company’s next phase of growth.

This is a hands-on role inside the factory environment, working closely with production, finance, engineering, and leadership to improve efficiency, throughput, and operational visibility.

Key Responsibilities

Operational Systems

• Implement and refine work order tracking and production systems
• Develop operational dashboards and KPIs
• Track labor efficiency across cutting, bending, welding, and assembly
• Identify production bottlenecks and process improvement opportunities

Manufacturing Process Improvement

• Improve production scheduling and workflow coordination
• Support second shift production ramp
• Reduce rework, delays, and operational waste
• Assist with facility layout and production flow improvements for our upcoming facility move

Technology & Automation

• Evaluate and implement automation and AI tools for operations
• Improve digital workflows across quoting, engineering, and production
• Help modernize internal systems and reporting

Operational Execution

• Support daily shop-floor operations
• Coordinate between engineering, finance, production, and leadership
• Assist leadership in scaling operational capacity as demand grows

Ideal Candidate

We are looking for a highly analytical, hands-on operator who enjoys solving complex operational problems.

Strong candidates may come from backgrounds such as:

·      Operations or manufacturing roles

·      Industrial engineering

·      Operations consulting

·      Supply chain optimization

·      MBA programs with operations focus

The ideal candidate will be:

·      Extremely analytical and systems-oriented

·      Comfortable working in a manufacturing environment

·      Comfortable working in both the office and on the shop floor

·      Curious about technology and AI tools

·      Proactive and solutions-driven

·      Eager to grow with a fast-scaling company

Location

This role is currently based at our manufacturing facility in Commerce, California.

As the company continues to grow, we expect to relocate to a larger facility within the next 9–12 months, likely in Orange County or the Inland Empire.

Work Schedule

This role works closely with production teams and requires an early start to support daily shop-floor operations.

Typical hours begin around 6:30–7:00 AM.

Job Summary:

Bernards is seeking new, dynamic Employee-Owners who are committed to the overall Mission, Vision, and Core Values of Bernards to help build A Better Experience. Our ideal Senior Superintendent candidate will manage and supervise all aspects of field operations for the assigned project from preconstruction through closeout. This includes preconstruction phase activities such as constructability reviews, QA/QC reviews, value engineering, subcontract scoping, site logistics plan and preconstruction schedule management. In addition, manage and supervise all construction phase activities such as project setup, safety management, subcontractor scope review, schedule management, field operations, trade production, subcontractor coordination, labor management, QA/QC management, timely procurement, staff management, client management, risk management, document management, punch list management and project closeout.

Essential Duties & Responsibilities, including but not limited to:

• PRECONSTRUCTION: Assist in the estimating / budgeting process, perform constructability reviews, help develop and manage the value engineering process, assist in the preparation of preliminary schedules and prime contract reviews.

• CONTRACT DOCUMENTS: Clearly understand all documents that make up the "Contract Documents” and enforce/manages the documents.

• AGREEMENTS: Review scope descriptions and ensure they are complete and well-coordinated.

• SAFETY: Ensure that the project site is safe and that the Injury Illness Prevention Program (IIPP) is implemented comprehensively, and all Bernards safety procedures are being followed.

• FINANCIAL MANAGEMENT: Assist the team in presenting major issues of the projection to upper management. Ensure all reasonable efforts have been made to maximize the project fee or minimize losses.

• RISK MANAGEMENT: Assist in ensuring proper insurance is in place and that the project is in full compliance with all Bernards’ risk management policies.

• QA/QC: Comply with the Bernards Quality Management Manual (QMM) outlining our quality policies, standards and procedures.

• SCHEDULING: Responsible for creation of the initial baseline schedule and updating of all subsequent schedules.

• DOCUMENT CONTROL: Ensure that all document control procedures are being followed.

• FIELD MANAGEMENT: Provide overall field operations leadership. Ensure the jobsite is safe, secure and work is progressing in compliance with all OSHA regulations. Ensure the subcontractor’s work is well coordinated in a productive sequence.

• PUNCHLIST: Ensure the punch list process is timely and it exceeds the Owner’s expectations.

• ALL OTHER DUTIES AS ASSIGNED.

Preferred Experience, Education, and Skills:

• Bachelor of Science in Construction Management, Civil Engineering, Architectural Engineering, or related field.
• Over 7 years of construction industry experience managing projects from start-up to completion.
• DSA/Public Works experience is required.
• Project experience ranging from $20M – $90M.
• Excellent written and verbal communication skills.
• Ability to build relationships with team members, industry partners, and clients.
• Ability to efficiently manage time, workload, prioritize and maintain a sense of urgency.
• Ability to handle sensitive, confidential matters.
• High attention to detail.
• Competency in Microsoft Suite (Excel, Word, Outlook, PowerPoint), P6 Scheduling and BIM.
• Strong negotiation skills with industry partners and clients.

About Bernards:

Bernards is a 100% employee-owned, multidisciplinary commercial construction and construction management company with a legacy defined by innovation, technical expertise, and operational excellence. For over 50 years, we have specialized in delivering best-in-class construction services to developers, corporations, educational institutions, and public agencies across a diverse range of sectors.

Who we are is rooted in an unwavering commitment to quality, collaboration, and client satisfaction. These guiding principles enable us to deliver exceptional value, cultivate enduring partnerships, and exceed expectations. By employing a multidisciplinary approach, we craft tailored solutions that address the unique needs of every project. With a steadfast focus on our clients’ goals and an unrelenting attention to detail, Bernards guarantees successful outcomes that stand the test of time.

At the core of our success lies the power of employee-ownership. Each team member shares a vested interest in the success of your project, fueling a culture of dedication, accountability, and innovation. This collective passion drives us to build more than just structures—we build trust, lasting relationships, and a shared vision for communities that thrive.

At Bernards, we don’t just construct; we create legacies grounded in excellence and driven by purpose. By focusing on "Building Better Experiences" for our employee-owners, customers, and industry partners, we empower a future defined by leadership, innovation, and impact.

Building Better Experiences for our employee-owners, customers, and industry partners for over 50 years!

• Driven by our commitment to community enhancement, we build with purpose to create a better tomorrow. This ethos is the cornerstone of our operations and inspires every project we undertake.
• Proudly recognized as a Ruby Certification Champion by the Board of Certified Safety Professionals and honored by the Cal/OSHA SHARP, we set the benchmark for safety excellence, ensuring the highest standards in every project.
• Our Centers of Excellence (COEs) lead the charge in innovation, mastering diverse markets to provide unmatched expertise and custom solutions. We ensure every project is a testament to precision and world- class excellence.

As an Employee-Owner, you’ll experience competitive pay and enjoy comprehensive benefits that include:

• Medical, Dental, and Health Insurance
• Stock Interest in the Employee Ownership Plan
• Health Savings Account
• Flexible Spending Account
• Employer Paid Life Insurance
• 401(k) with employer match
• Open Personal Time Off
• Sick Time
• Paid Holidays
• Tuition Reimbursement
• Employee Referral Bonus
• Employee Assistance Program
• Flexible Work Hours

Bernards is an equal opportunity employer that strives to attain and retain, top diversified talent in the construction industry. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

For candidates that need reasonable accommodations during the application process, or to perform essential functions of this role, please contact

The Property Manager of the North Los Angeles Region is responsible for the overall profit, performance and operations of assigned properties which include The Americana at Brand, 252 South Brand, Masonic Temple, North Masonic, Colorado and Central, and Broadway and Central. This position assumes a key leadership role responsible for providing strategic management direction of the property, overseeing all facets of the operation including but not limited to center merchandising, tenant relations, financial planning, contract management, and community involvement, ensuring operational excellence across all departments and financial performance.

ESSENTIAL FUNCTIONS

• Develop an annual business plan and operating/capital budgets to meet property needs and exceed NOI goals.
• Manage property financials including budgeting, reforecasting and accounts payables/receivables, improving net operating income to keep expenses within budget and revenues surpassing budget to exceed stated NOI and free cash flow goals annually.
• Maximize property profitability through tenant sales, financial management, and cost control.
• Oversee capital expense projects within approved budgets and timelines and maintain an accurate five-year and ten-year CAPEX schedule.
• Enhance data collection and analysis across all disciplines and departments; develop systems to quantify the success of existing initiatives and qualifying new endeavors.
• Strive for all aspects of the business to be quantifiable and measurable to influence decision making, stimulating growth in traffic, revenue, and productivity
• Supervise and facilitate personnel management across all departments involved in property operations, including management, concierge, parking, engineering, public safety, landscaping and housekeeping.
• Continually encourage team collaboration, motivation, and high-performance standards to achieve personal, professional, and property goals
• Organize and implement training programs for property team member’s talent development including the development and growth of property management team members
• Implement and maintain a MOD schedule to ensure coverage on property at all dates and times of the year
• Collaborate with the Leasing department to strategize five-year and ten-year leasing plans
• Develop strong relationships with all property tenants to understand their business needs, provide targeted support to drive optimal performance, and partner with the marketing team to ensure strategic alignment, performance, and engagement
• Collaborate with Development and supervise long-term asset management plans including repair and maintenance, facility alterations to adapt to business demands, and renovations to existing fixtures, equipment, and infrastructure
• Partner with the Tenant Services department to manage new tenant construction, ensuring seamless coordination between retail and residential needs and supporting tenants in opening on or before the rent commencement date
• Evaluate property needs, recommend improvements, and drive necessary actions
• Maintain tenant relationships, handle complaints, lease enforcement, and amendments
• Maintains a responsive, open line of communication with tenants including handling tenant complaints, lease enforcement, improvements and lease schedules
• Manage contract services, negotiations, renewals, and terminations
• Direct oversight of all initiatives and employees on property including but not limited to marketing, events and property enhancements
• Partner with Marketing, Brand Partnerships, and Events departments for initiatives driving traffic and sales
• Collaborate with Residential property teams to align operations, communications, and programming in a mixed-use environment. Ensure a seamless resident and guest experience by coordinating property enhancements, events, security, parking, housekeeping, and shared services while presenting a unified management approach that supports asset value and satisfaction
• Manage the day-to-day operations of the office building needs. Oversee concierge, security, housekeeping, parking, engineering and services to support office tenant convenience, productivity, and overall asset value.
• Foster positive relationships with the local community, law enforcement, and regulatory bodies including but not limited to city officials, governing agencies, local first responders, charitable organizations, local businesses, and chambers of commerce
• Ensure responsiveness to guest feedback and maintain positive guest relations
• Supervise special events and holiday planning
• Additional duties as assigned

MINIMUM REQUIRED QUALIFICATIONS

• Strong business and financial acumen.
• Experience in vendor and third-party management.
• Innate focus on exceptional customer service.
• Effective communication and engagement skills.
• Results-oriented with a strong sense of accountability.
• Ability to operate effectively under pressure.
• Keen attention to detail in all aspects.
• Solution-focused with a strong problem-solving orientation.
• Ability to manage a rotating schedule, responding to property needs.
• Ability to work outdoors for extended periods of time.

***We are managing this recruitment process internally and are not engaging external recruiters or staffing agencies for this position. We kindly ask that agencies refrain from contacting us regarding this role.***

Leads day-to-day operations of projects for a general contracting business. Multi-family and senior housing.

PRIMARY DUTIES AND RESPONSIBILITIES:

· Planning and coordination of subcontractors’ work and activities for a project.

· Attend and participate in Safety Training programs and ensures implementation of safety procedures that create a safe and healthy work environment through the job site. Adheres to OSHA safety and record keeping requirements.

· Enforce compliance with project site safety, health, and environmental quality standards.

· Verify subcontractor certificates of insurance.

· Monitor subcontractor personnel to ensure adherence with project plans and promotes quality control of all installations.

· Leads on productivity issues and monitors work performance and productivity of company employees and subcontractors to ensure project plans and schedule are followed and project is executed effectively and within budget.

· Advise senior level management of potential problems, work interference's or schedule difficulties, while assisting in circumventing or mitigating such conflicts. Provides assistance to involved contractors in resolving problems.

· Contributor to development of a thoughtful project pre-plan which includes a CPM schedule, work sequences, manpower utilization, material handling and storage requirements and equipment use.

· Communicate with project team regarding Work Directives, RFI’s, and Material Submittals.

· When requested, interfaces with owner, architect and design professionals to ensure compliance to design intent and owner satisfaction. Facilitates discovery and correction of contract document “errors and omissions” and problem solving to reduce the costs incurred.

· Ensure compliance with all internal and external record keeping requirements, with emphasis on accurate, properly coded employee automated timecards and accurately codes, fully priced material delivery tickets

· Prepare reports, document and complete all punch lists in a timely manner, review all drawings, specifications and subcontractor submittals

· Follow completion schedules and maintain a daily, written log of activities on the jobsite. Logs and reports might include photos and videos

· Use Procore construction management system to perform record-keeping tasks including, composing daily diaries, maintaining project logs and retrieving RFIs, submittal logs and agreements.

· Contribute to building good communications between project management, field engineering, estimating and specialty contractors to ensure construction complies with plans, specifications and company quality standards and that projects are completed on time and within budget.

· Chair or attend pre-job conference, regular subcontractor meetings

· Train, motivate and support subordinate employees in developing their capabilities to further company, project and personal development goals.

· Responsible for continuously expanding and updating professional knowledge and honing training skills to enhance individual and team innovation and productivity.

· Perform additional assignments as directed by supervisors or as required for successful project completion

· Attend and/or lead job meetings and provide thorough reports

· Report to General Superintendent

QUALIFICATIONS:

1. Ability to analyze and develop solutions to complex problems and to communicate effectively with diverse groups required.

2. Advanced knowledge of various construction disciplines, scheduling, cost control, quality control and engineering drawings.

3. Working knowledge of company computer systems, be proficient in MS Office and software necessary.

4. Must have comprehensive understanding of safety regulations and the application of loss control measures.

5. Must be able to read plans and have experience with punch lists.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud.

This is a full time, salary position. Including health insurance, dental, vision, 401K, paid holiday and vacation time.

Job Type: Full-time / Monday - Friday; some Saturday's required.

Salary: Depends on Experience ($125,000-$160,000); 5 years minimum experience required.

Job Type: Full-time

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Akron, OH / Remote (U.S.)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22
#Remote

PI103b1a8bddaa-38

*At Securian Financial the internal position title is Data Science Sr Con.*

Position Overview

As a Lead Data Scientist at Securian Financial, you are a recognized expert and technical leader within the organization. You will apply deep analytical and machine learning expertise to solve complex enterprise problems while shaping the technical direction of data science and AI initiatives. You seek to understand first, build scalable solutions that drive strategic growth and value, and thrive in a collaborative, teamwork-oriented environment.

You will play a key role in advancing our enterprise AI and advanced analytics capabilities, influencing tooling standards, MLOps practices, and responsible AI adoption across the organization. Our company values innovation, collaboration, and excellence, and we offer a supportive and inclusive environment where diverse perspectives are encouraged and professional growth is prioritized.

Key Responsibilities

• Design, develop, and productionize advanced machine learning and AI models in partnership with data engineering and software engineering teams.

• Establish and promote MLOps best practices, including experiment tracking, model versioning, reproducibility, CI/CD, and model monitoring using tools such as MLflow and DSpy.

• Lead the design and evaluation of AI and generative AI solutions, including LLM-based systems, and agent-based workflows.

• Collaborate with cross-functional team to identify, prioritize, and deliver high-impact, data-driven solutions.

• Communicate complex analytical and model-driven insights to technical and non-technical audiences through clear narratives, reports, and presentations.

• Ensure model quality, robustness, and regulatory alignment through rigorous testing, validation, and explainability techniques.

• Drive adoption of enterprise standards for data science, machine learning, and responsible AI.

• Identify opportunities for process improvements and automation using advanced analytics and AI techniques.

• Lead and mentor more junior data scientists, providing guidance and support in their professional development while working on projects.

Preferred Qualifications

• A Master's or PhD degree in Data Science, Computer Science, Statistics, Mathematics, or a related field.

• At least 5 years of experience in data science or a related field, with a minimum of 2 years in a project leadership role.

• Experience building and deploying production solutions

• Experience with MLOps tools and practices, including MLflow (or similar) for experiment tracking and model management.

• 2+ years of experience in Insurance, actuarial, or a related field

• Proficiency in programming languages such as Python

• Strong expertise in machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, Scikit-learn).

• Experience with cloud platforms (e.g., AWS, Azure, Google Cloud).

• Solid understanding of statistical analysis, data visualization, data wrangling techniques, NLP approaches, ML model selection.

• Solid understanding of model approaches to satisfy regulatory requirements regarding explainability/interpretability of advanced AI/ML models

• Excellent problem-solving skills and the ability to think critically and analytically.

• Strong communication and presentation skills, with the ability to convey complex concepts to non-technical audiences.

• Demonstrated ability to manage multiple projects and prioritize tasks effectively.

• A passion for continuous learning and staying current with industry trends and developments.

Preferred Skills

• Experience with natural language processing (NLP), LLMs, prompt engineering, and advanced ML models.

• Familiarity with modern ML debugging, evaluation, and optimization tools such as DSpy or equivalent.

• Knowledge of responsible AI practices, including bias detection, fairness assessment, and model risk management.

• Knowledge of data governance and data privacy regulations.

• Background in finance, healthcare, or other specialized industries.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Roanoke, VA (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI80414dffc879-38

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

This is a Program direct-support position and requires a technical understanding of piece part electronic components and their assembly level applications.  This candidate will transition into a key leadership position in the supporting program Obsolescence Integrated Product Team and will drive issue resolution for situations involving obsolescence.  

The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications Engineering tasks supporting programs in the Proposal, System Design Description, Low Rate Initial Production, Production and Support phases. Position will require day to day interface with Designers, Contracts, Estimating, Supply Chain, Program Management, and other disciplines. 

 
This position is an onsite role, located in Tucson, AZ.

What You Will Do: 

• Understand and/or generate a program statement of work (SOW) and other defined customer component application requirements. 

• Develop and/or sustain a proactive Obsolescence Management process to deliver cost saving obsolescence mitigation strategies and solutions. 

• Drive resolution through support or execution of lifetime buys, selections of alternate parts, redesign efforts or other mitigation strategies and will facilitate and support contract negotiations, basis of estimates, and supplier statements of work for proposal efforts. 

• Interact with Program and customer leadership on a regular basis to communicate status of mitigation strategies. 

• Conduct trade study analysis help identify cost effective obsolescence driven cut in points for proposed unit redesigns.

Qualifications You Must Have:  

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience with any combination of the following:

• Experience with proactive and reactive component obsolescence management methodologies. 

• Experience with data collection, analysis, and presentation skills to adequately discuss system impact of component obsolescence issues. 

• Experience with project management working with schedules, costs, and integration of stakeholder needs throughout the obsolescence process. 

• Financial and Contract Management experience with proposals, BOE, EVMs, SOWs, CLINs and CDRLs. 

• Experience with BOM (Bill of Material) development and management for developmental and production programs. 

• Risk and Opportunity business case analysis experience supporting sustainment vs redesign cut in decisions. 

Qualifications We Prefer:  

• Master’s Degree in Electrical Engineering or other related science or engineering discipline 

• Ability to navigate multiple complex processes and tools. 

• Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field. 

• Ability to read and interpret engineering drawings and hierarchy definition. 

• Knowledge of component failure modes by commodity 

• Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs 

• Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications 

• Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces 

• Excellent communication skills to interface with other Integrated Product Team members, including Electrical Engineering, Mechanical Engineering, Supply Chain Management, Quality, Operations, and Supplier Engineering.  

• Capable of supporting regular customer interactions including but not limited to leadership engagements, responding to proposal requests and contract negotiations. 

• Outstanding organizational, presentation and technical skills. 

• Ability to multi-task and appropriately prioritize responsibilities. 

• Willingness to support occasional travel.  

What We Offer  

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. 

This position offers relocation based on candidate eligibility.

Learn More & Apply Now!  

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms