Engineering Geology Jobs in Pinehurst, MA
104 positions found — Page 8
Kessel Run is an Air Force unit that delivers resilient command and control and targeting software capabilities that provide warfighters with decision advantage.
Under the Department of the Air Force Program Executive Office for Command, Control, Communication, and Battle Management (DAF PEO C3BM), Kessel Run technologies make up the DAF BATTLE NETWORK, the systems-of-systems designed to help the Joint Force make operational decisions faster than our adversaries.
The Division architects and acquires the means to connect weapon systems with warfighters and decision makers to enable the warfighter to win against the pacing challenge in an era of great power competition.
This is a full time position located at Hanscom AFB, Bedford, MA.
Essential Job Functions: Perform routine cost estimating methods such as analogy, engineering or scientific methodology, and extrapolation.
Perform cost estimating outputs to assess the impact various factors have on the costs to design, research, develop, operate, maintain, and dispose of a particular weapon system.
Analyze all elements affecting costs for a project of limited scope.
Analyze contractor financial data using Earned Value Management (EVM) measures of merit to determine program viability with respect cost and schedule performance.
Analytical processes, such as: setting up the problem; conducting background research; collecting and reducing data; displaying data for analysis; formulating mathematical expressions; and drawing conclusions.
Provide contract pricing support services for tasks in all phases of the acquisition cycle to include development, award, management, measurement and contract closeout.
Prepare draft pricing briefings, draft pricing correspondence, and draft agency pricing reports.
Develop pricing related evaluation criteria, track pre-award task order milestones and status.
Support source selection teams in the evaluation of cost proposals.
Prepare pricing documentation for review and approval by the Government CO.
Prepare pricing spreadsheets of technical proposals and perform other pricing analyses to support price/cost evaluations of technical.
proposals.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
Must have an Active Secret Clearance.
BS/BA Degree in a related discipline 5 years of experience with experience in related discipline.
Knowledge of most appropriate phase of the budgetary cycle (planning, programming, justification, and execution) for initiating new programs.
Experience in quantitative analysis and calculus.
Experience with ACEIT.
Salary Range: $58,935-$75,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives.
We offer competitive compensation, benefits, and opportunities for learning and development.
Our broad and competitive mix of benefits is designed to support and protect employees and their families.
Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs.
Learn more about our benefits here: DCS Corp Benefits
Account Executive
Join a high-performing sales team at FootBridge, where you will develop new business and work with clients across the Energy, Industrial, Manufacturing, Engineering, and Construction markets nationwide. As an account executive you will develop new business, build client relationships and work closely with the recruiting team to deliver the highest quality service. The position requires strategic thinking, strong organizational skills, and the ability to develop long-term professional relationships.
Responsibilities
- Strategically develop new business with potential clients in the energy industry
- Work with clients to gain an understanding of their project-based challenges
- Build lasting relationships with clients and expand business opportunities
- Understand the strategic goals, objectives and organizational structure of targeted companies
- Work with the recruiting team to deliver the highest quality resources to clients
Qualifications
- Bachelor’s degree or equivalent experience
- Proven consultative sales experience required
- Effective organization and time management skills
- Effective written and verbal communication skills
- Willingness to work an extended schedule and travel as necessary
Compensation / Benefits
- $60-70k base salary plus uncapped commissions
- Typical first year earnings of $90-100k; realistic long-term potential of $200-300k+
- Progressive commission plan up to 18% of total gross profit
- Comprehensive benefits including medical, dental, vision, and 401k
- Flexible work schedule and PTO policy
FootBridge is an equal opportunity employer committed to an inclusive environment where everyone is valued and respected. We make employment decisions based on qualifications and business needs, without discrimination on any basis, and we welcome candidates from diverse backgrounds to apply.
Learn more at
Senior Validation Engineer
Site & Equipment Qualification
Radiopharmaceutical Manufacturing
Location: Wilmington, MA
Must have Green Card or Citizenship
Join my client’s cutting-edge radiopharmaceutical manufacturing operation and play a pivotal role in bringing life-changing therapies to patients. As the Senior Validation Engineer, you’ll lead site startup, facility qualification, and GMP equipment validation in a highly specialized, radiation-controlled environment. This is your opportunity to shape compliant, inspection-ready systems from the ground up in a rapidly advancing sector of biotech.
Why You Should Apply
- High-impact role supporting innovative radiopharmaceutical production
- Lead site startup and expansion initiatives in a regulated GMP setting
- Work with advanced systems: hot cells, isolators, synthesis modules
- Competitive salary range: $120,000 – $185,000 Depending on level and experience
- Comprehensive benefits package including medical, 401(k), and PTO
What You’ll Be Doing
- Lead facility, utility, and cleanroom (ISO) qualification activities
- Develop and execute Validation Master Plans (VMP)
- Author and execute URS, DQ, IQ, OQ, PQ protocols
- Oversee qualification of HVAC, WFI, clean steam, gases, and water systems
- Support FAT/SAT, manage deviations, CAPAs, and change controls
- Serve as SME during FDA and regulatory inspections
About You
- Bachelor’s degree in Engineering or related technical field
- Strong expertise in GMP commissioning & qualification lifecycle (ASTM E2500 preferred)
- Hands-on experience in aseptic manufacturing environments
- Experience with radiopharma systems (hot cells, shielded isolators, synthesis modules)
- Deep knowledge of 21 CFR 210/211 and radiation safety regulations
How To Apply
We’d love to see your resume, but we don’t need it to have a conversation. Send us an email to and tell me why you’re interested. Or, feel free to email your resume. Please include Job#19738.
Location: Woburn, MA (on-site 5 days per week)
Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.
The Role:
The Quality Engineer I / II will support Quality Assurance activities for Vaxess’ combination product programs, with a strong focus on medical device design controls, risk management, and cGMP compliance. This role provides hands-on quality support across design and development, supplier oversight, process validation readiness, and batch record/data review, aligned with ISO 13485, 21 CFR 820, and applicable combination product regulations (21 CFR 4).
Reporting to the Quality Assurance Manager, this role works cross-functionally with Manufacturing, Process Development, Quality Control, and Material Management to support compliant execution and ensure product quality and safety during early clinical development.
Responsibilities:
- Support quality oversight of Vaxess combination product(s) to ensure compliance with safety, efficacy, and regulatory requirements.
- Administer and support the Quality Management System (QMS) in accordance with ISO 13485, 21 CFR 820, 21 CFR Part 4 (Combination Products), and applicable FDA and international regulations.
- Provide quality support for Design Control activities, including Design History File (DHF) maintenance, design reviews, Design Verification and Validation (DVV), and design changes.
- Support risk management activities, including development and maintenance of risk analyses (e.g., FMEA, hazard analyses) and linkage to design and process controls.
- Support process validation and qualification activities, including test method validation (TMV), process validation (PV), and equipment qualification, as applicable to Phase I and GMP-ready manufacturing.
- Participate in Material Review Board (MRB) activities, including nonconformance assessment, disposition, and documentation.
- Perform quality review and approval of batch records, executed manufacturing records, analytical data collection forms, test records, and technical or experimental reports.
- Collaborate in supplier quality management activities, including supplier qualification, auditing, monitoring, change evaluation, and periodic requalification.
- Author, review, and revise quality documentation, including SOPs, work instructions, test methods, protocols, reports, forms, and specifications.
- Support preparation, review, and organization of quality data and documentation for regulatory submissions and inspections.
- Contribute to continuous improvement initiatives within the QMS, including CAPA, deviation investigations, and quality metrics.
Qualifications:
- Quality Engineer I: Minimum of 3 years of experience in Quality Assurance or Quality Engineering within a cGMP-regulated medical device or combination product environment.
- Quality Engineer II: Typically 4–5 years of progressive quality experience in medical devices, pharmaceuticals, biologics, or combination products.
- Working knowledge of ISO 13485 and FDA medical device Quality System Regulations (21 CFR 820); familiarity with combination product requirements strongly preferred.
- Experience supporting early-phase (preclinical to Phase I) product development is highly desirable.
- Experience with design controls, risk management (FMEA), and validation activities preferred.
- Experience reviewing GMP documentation such as batch records, test methods, protocols, and reports.
- Strong written and verbal communication skills, with the ability to clearly document technical and quality concepts.
- Proficiency with Microsoft Office applications (Word, Excel, PowerPoint).
At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to
Location: Woburn, MA (on-site 5 days per week)
Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.
The Role:
The Quality System Specialist / Senior Quality System Specialist plays a key role in supporting and enhancing Vaxess Technologies’ Quality Management System (QMS) to ensure compliance with applicable GMP/GLP standards. This position focuses on maintaining robust electronic quality systems, managing controlled documentation, and supporting the integration of new processes and applications.
Responsibilities:
Quality System and Computerized System Oversight
- Support quality oversight for computerized systems, including QMS implementation, configuration, validation, and data migration activities.
- Assist in launching new or enhanced system functionalities and communicating updates or user guidance to ensure effective adoption.
- Collaborate with internal stakeholders and system vendors to ensure integrated processes across modules (Document Control, Training, Equipment, and Material Management).
- Troubleshoot and resolve user issues as needed.
Documentation and Record Management
- Manage the full lifecycle of controlled documents, including creation, revision, review, approval, distribution, and archival within the electronic document management system (EDMS).
- Ensure that controlled documents, such as SOPs, batch records, and specifications, are accurate, current, and compliant with regulatory and internal requirements.
- Coordinate document workflows with cross-functional teams to ensure timely completion and alignment with procedural requirements.
- Author or revise SOPs, forms, and work instructions supporting quality system and GMP operations.
Training and Compliance Support
- Provide training and day-to-day support to employees on document control and system processes.
- Serve as a subject matter expert (SME) for document control and computerized systems during internal and external audits and inspections.
- Support tracking and reporting of quality metrics (e.g., training completion, document cycle time, CAPA effectiveness) to drive continual improvement.
Qualifications:
- Bachelor’s degree in Life Sciences, Engineering, or a related discipline preferred; equivalent work experience considered.
- 2–5 years of experience in a GMP, GLP, or GxP-regulated environment (pharmaceutical, biotechnology, or medical device industry).
- Experience with electronic quality management systems (e.g., Enzyme, Greenlight Guru, Veeva, MasterControl, etc.) is strongly preferred.
- Familiarity with relevant regulations and standards (21 CFR Parts 210/211/11/820; ISO 9001/13485).
- Excellent attention to detail, organization, and communication skills; ability to manage multiple priorities in a dynamic environment.
At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to
Location: Woburn, MA (on-site 5 days per week)
Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world.
Responsibilities
- Support MAP manufacturing and process development for the Platform Research team.
- Work cross-functionally with formulation/analytical and preclinical teams to identify novel candidates for development on the MAP platform, build platform flexibility and utility.
- Develop and document batch records and test methods to characterize and support MAP formulation and process development; identify opportunities for process improvement.
- Thoroughly document MAP manufacturing process parameters, analyze data and trends, and effectively communicate results through technical presentations and written reports.
- Support early collaborations with strategic partners by generating proof-of-concept data packages.
- Interface with manufacturing and automation teams to share learnings and support platform improvement.
- Assist with the design and testing of new fixtures, tooling, and equipment to improve process throughput and consistency.
Qualifications
- BS or MS in Biomedical, Chemical, or Mechanical Engineering, or related discipline with 0-2+ years of R&D biotech or medical device experience.
- Prior industry experience with novel platform and process development is preferred.
- Familiarity with imaging and physical characterization techniques is a plus.
- Experience with programming and prototyping/3D printing is a plus.
- Experience with GxP is a plus.
- Strong attention to detail. Ability to identify root causes of problems and recommend corrective actions.
- Excellent verbal and written communication skills.
- Demonstrated abilities to learn new skills and fields, solve challenging technical problems, think independently, and work collaboratively in cross-functional teams
- Entrepreneurial spirit and drive to positively impact public health
At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to
Date Posted:
2026-02-24Country:
United States of AmericaLocation:
US-MA-TEWKSBURY-TB3 ~ 50 Apple Hill Dr ~ CONCORD BLDG, Tewksbury Tb3 300 ConcordPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
We are seeking a motivated Senior Software Section Leader to join the Patriot Software Team within the Air and Missile Defense Software Department. As a Section Leader, you will be responsible for the oversight of software personnel to meet program needs. The ideal candidate is a well-disciplined individual with a proven applicable technical background, who is able to thrive in a dynamic agile environment and is able to work well in a team setting.
What You Will Do
- Ensure that each employee has suitable work assignments and opportunities for growth and advancement
- Contribute to the technical oversight of employees in support of their daily work assignments
- Performance development and appraisal
- Salary and staffing planning
- Ensuring the adherence to company policies and the communication of company and program information
- Responsible for supporting a major program task within the Patriot domain
- This position requires exclusive onsite presence.
Qualifications You Must Have
- Typically requires a bachelor’s in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
- Minimum of 2 years experience in functional management, leading a medium to large size team
- Lead and / or project management experience
- The ability to obtain and maintain an interim secret U.S. security clearance prior to the start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Active Secret security clearance.
Functional management experience (Managing performance, conducting reviews, mentoring, care and feeding of staff, hiring, etc).
Cost / Schedule Management and Reporting experience
Strong communication, interpersonal and decision-making skills
Customer focus and collaboration skills
Effective presence and influential leadership capability, with the ability to interact with senior levels of leadership effectively – including customer, Raytheon Technologies teammates and suppliers
Proven experience with software development techniques and tools, including some, or all, of the following computer languages: C and Ada
Experience in embedded systems, real-time systems, or large-scale applications.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligible – Relocation assistance available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
This position is in Tewksbury, Massachusetts. Living in Massachusetts means you’ll have easy access to the ocean and locations of historical significance. You can enjoy varied outdoor activities ranging from hiking and camping to cross-country skiing and snowmobiling. Massachusetts is recognized as one of the best states to call “home.”
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Essential Job Functions: The candidate will provide Systems Engineering assistance that applies a broad theoretical and practical knowledge of system engineering to the acquisition process.
The candidate will also provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Conduct reviews on program portfolio to evaluate and/or recommend alternative plans, improve systems engineering programs/processes, manage/sustain program technical baseline, and design/perform system level tests to assure that subsystems and system performance is achieved in accordance with approved specifications.
Perform program reviews to evaluate alternative proposed plans, systems engineering programs, design and test results to assure that subsystem and system performance is achieved in accordance with program specifications.
Prepare technical documents which define, specify, and recommend system/subsystem characteristics.
Prepares management reports and conducts technical presentations for planning, implementation and corrective action using application of engineering economy principles.
Perform validation of systems, including development of criteria and procedures.
Analyze and/or evaluate results of major engineering systems.
Provide system/program engineering, technical support and technical training to support programs/initiatives, including but not limited to: acquisition, development, integration, sustainment, continued evolution, deployment/fielding and installation, and operations oversight.
Provide engineering support services and inputs to program and project risk management activities in compliance with AF SEAM processes.
Provide engineering support to conduct formal trade studies based on engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, productivity, reliability, maintainability, risk, and schedule.
Provide technical recommendation support services, including reviews, studies, audits, evaluations and analyses, scientific and procedural guidance, documentation, technical analysis, and support of associated engineering IPTs.
Provide proposal analysis support services that compare and quantify proposed systems, components, approaches for technical feasibility, compatibility, and cost effectiveness.
Provide concepts and requirements analyses support services including, but not limited to, reviewing and analyzing.
Review and analyze system concepts and user requirements that have been approved and entered into a system requirements baseline (functional, allocated, and product).
Assist with material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support.
Support engineering technical and technical management processes associated with version/configuration control.
Requirements definition and analysis.
Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment.
Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
Development of systems engineering documentation, an understanding of the linking interactions between systems of systems, configuration management, technical data packages and acquisition and sustainment engineering processes.
Support engineering technical and technical management processes associated with version/configuration control, to include: a) Requirements definition and analysis; b) Architecture design, implementation, integration, verification, validation, transition, decision analysis, technical planning, technical assessment; c) Requirements management, risk management, configuration management, technical data management, and interface management.
Assist with planning and execution of technical reviews and assessments (e.g.
System Requirements Review, Technology Readiness Assessment), as well as associated documentation development (e.g.
Systems Engineering Plan, Risk Management Plan) that are an inherent part of the activities and processes listed above.
The Contractor shall provide engineering support in the design, operation, and sustainment of systems and components that cover tasks throughout the acquisition life cycle (requirements analysis through system disposal).
Tasks may also include supporting Foreign Military Sales.
Conduct and support all engineering and technical activities required during the material solution analysis, technology, engineering, and manufacturing development, production and deployment, and operation and support phases of the systems acquisition process.
Develop/prepare engineering and technical documentation inherently part of the activities listed above (e.g.
Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Critical Design Review(CDR), Manufacturing Readiness Assessment (MRA), Reliability Technical Interchange Meeting (TIM)) and associated artifacts (e.g.
Critical Design Review entry and exit criteria).
Conduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment.
Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes.
This may include traditional architecture development or Model Based Systems Engineering processes.
Track and ensure system architecture and interoperability requirements for the baselined system is maintained.
Detail operational requirements and functional interactions within the system and with other systems, considering life cycle costs, logistics supportability, human factors, et al, to determine if the basic building blocks of the system are defined in sufficient detail to support a development program effort.
Translate DoD user requirements into system requirements for designing, developing, testing and evaluating systems and subsystems using USAF and DoD approved acquisition methods.
Provide engineering analysis of system training, training equipment and simulator requirements; prepare technical documentation; and provide engineering evaluation of equipment and simulator designs.
Understand and implement robust DoD acquisition and sustainment systems engineering processes to address the life-cycle requirements.
Prepare and review program specifications for items, processes and materials.
Develop and utilize analytical, simulation, MBSE and digital engineering analysis techniques to optimize system performance and/or system effectiveness; establish system sensitivities, define system parameters, evaluate hardware and validate flight test results in terms of overall system relationships and applications.
Develop, prepare, review, and integrate selected milestone review documentation, periodic reports, and certifications as identified in current DoD and AF acquisition policy.
Review, evaluate and monitor acquisition Contractor drawings for completeness, currency, technical accuracy and conformance to requirements, specifications, regulations and quality control to ensure compliance with ASME technical Data Package format and requirements.
Complete and support requirements definition and analysis, architecture design, implementation, integration, verification and validation, transition, decision analysis, requirements management, risk management, interface management, and configuration management.
Facilitate the transfer of information, lessons learned and best practices across all customers and contractors serviced under this task order within constraints of proprietary rights.
Perform market research and trade studies to assess current and future systems to ensure they that meet mission needs/requirements.
Conduct, define and evaluate system cost, schedule, and technical performance.
Perform reviews, studies (including root cause analysis), audits, evaluations and analyses and provide technical recommendations to the Government.
Conduct engineering performance, effectiveness, cost effectiveness, cost performance, life cycle cost, producibility, reliability and maintainability, risk and scheduling trade-off studies.
Develop USAF approved Test and Evaluation Master Plans (TEMP), test plans and procedures, prepare test readiness reviews and associated test documentation using DoD and USAF standard processes, execute developmental tests and assist in operational test planning/execution, and evaluate tests in support of acquisition and sustainment programs.
Participate in integrated logistics support efforts, provisioning and source coding, maintenance data collection, technical order management, configuration management, evaluation of quality deficiency reports, and/or identification of alternate sources of supply for diminishing manufacturing/materiel sources preferred.
Required Skills: Due to the sensitivity of customer related requirements, U.S.
Citizenship is required.
A bachelor’s degree in a related field and 10 years of experience, 5 of which must be in the DoD.
Active Secret security clearance.
Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
Experience with network architectures, embedded systems and application deployment across a variety of systems and hardware, to include cloud deployment and virtualization.
Familiarity with DoD Acquisition processes including Technology Maturation, Risk Reduction, Engineering Manufacturing and Development, Production and Deployment activities.
Familiarity with Electronic Warfare and/or Air Combat operations including live aircrew training/development of tactics, techniques, and procedures and Range Infrastructure architectures and systems.
Salary Range: $87,934-$130,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives.
We offer competitive compensation, benefits, and opportunities for learning and development.
Our broad and competitive mix of benefits is designed to support and protect employees and their families.
Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs.
Learn more about our benefits here: DCS Corp Benefits
Date Posted:
2026-02-27Country:
United States of AmericaLocation:
US-MA-TEWKSBURY-TB3 ~ 50 Apple Hill Dr ~ CONCORD BLDG, Tewksbury Tb3 300 ConcordPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
Secret - CurrentSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Are you ready to join a dynamic, comprehensive, and growing professional organization? The Systems Engineering (SE) Long Range Radars (LRR) department is seeking a Senior Systems Engineer to contribute to concept development, architectural design, requirements generation and flow-down, modeling and simulation, systems analysis, integration, testing, and evaluation of world-class Missile Defense and Sensor Systems. In this role, you will lead the technical development and sustainment of the Qatar Air Operations Defense System (AODS) platform infrastructure.
The AODS platform consists of Commercial Off-The-Shelf (COTS) servers, appliances, and networking equipment, operating in a dynamic environment with constantly evolving priorities. Every day presents a new set of challenges. Whether it’s hardware, software, networking, or a combination of all three, you’ll be challenged to learn how our systems work and identify the sources of new and unexpected issues through troubleshooting and data analysis.
We value various skills and experience, so don't hold back. Your qualifications could add tremendous value to our team. Our customers come from all different backgrounds, and so do our employees. If you're passionate about what you could accomplish here, we'd love to hear from you!
What You Will Do
In this role, you will collaborate across disciplines and partner with Scrum teams to implement solutions, gaining exposure to every aspect of the system while directly contributing to its success. Key responsibilities include:
Leading system-level operations center sustainment, execution, and reporting.
Troubleshooting hardware and software issues to maintain site operations and ensure system reliability.
Developing and upgrading platform capabilities, including operating systems, networking, and cybersecurity components.
Interfacing with and reporting to U.S. Government customers and Program Leadership on system development and operational status.
Preparing integration and implementation documentation, such as plans, procedures, and reports.
Providing reach-back support to teams supporting the operational system in-country.
Analyzing data from operations center hardware, software, and simulations to identify and resolve issues.
Utilizing data analysis results to support root cause identification and resolution.
Collaborating across multi-disciplinary engineering functions to drive performance, improve system functionality, and resolve technical challenges.
This position will be on site in Tewksbury, MA.
Qualifications You Must Have
Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.
Experience with IT, networking, and/or system administration, including: Command and Control (C2) system hardware (e.g., servers, switches, routers), Virtual Desktop Infrastructure (VDI), Virtual Machines/Containers, SQL databases, Active Directory (Windows/Linux), and/or VMware systems.
Experience conducting technical analysis such as data analysis, troubleshooting, and/or identifying root causes.
Experience with virtual and hyper converged platforms.
Qualifications We Prefer
Strong ability to clearly articulate technical concepts, both verbally and in writing.
Proven interpersonal skills for collaboration across multidisciplinary teams.
Adaptability to dynamic, fast-paced environments with a focus on innovative solutions.
Experience with the Systems Engineering process, including design, development, and evaluation.
Proven ability to develop, document, and maintain processes, methods, and tools for technical execution and sustainment.
Experience interfacing with customers to deliver technical solutions to complex problems.
Hands-on expertise in network configuration and troubleshooting.
Knowledge of air defense programs and large, complex systems.
Familiarity with command and control systems involving sensors and effectors.
Experience with Link-16 networking and interfaces.
Proficiency in scripting languages like Python, Ruby, or PowerShell.
Knowledge of Microsoft Active Directory, Group Policy Objects, and identity management best practices.
A Master's degree in Engineering, Science, Mathematics, or a related discipline is preferred.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligibility– Relocation assistance available
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
