Engineering Geology Jobs in Ohio

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

CAD Drafter (Entry Level)

Location: Columbus OH

Contract: 12-month contract

Pay: 20-22/hr

Description

Brooksource is hiring a CAD Drafter to support one of our Engineering Services partners in Columbus, OH. We welcome entry-level candidates, this is a great opportunity to gain hands-on experience and grow your CAD drafting skills within a supportive engineering team.In this role, you will create underground construction drawings to support utility installation projects across multiple states.

Preferred Experience: There will be on the job training

• Basic experience with CAD software such as AutoCAD
• Familiarity with Civil 3D is a plus.
• Understanding of drafting standards through coursework or hands-on projects.
• Ability to perform 2D drafting, including drawing multiple views
• Comfortable using modern computers, software, and digital workflows.
• Exposure to GIS, surveying, or engineering technology coursework is helpful but not required.
• Ability to learn foundational Outside Plant (OSP) concepts such as conduit routes, cable paths, manholes, handholes, and aerial/underground utility layouts.

Education:

• High School diploma required
• Associate or Bachelor’s degree, or a related technical certificate, preferred

Brooksource is an equal opportunity employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, lactation and related medical conditions), gender identity or gender expression, sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances.

Benefits & Perks

Benefits & Perks: Brooksource offers competitive medical, dental, vision, Health Savings Account, Dependent Care FSA, and supplemental coverage with plans that can fit each employee’s needs. We offer a 401k plan that includes a company match and is fully vested after you become eligible, paid time off, sick time, and paid company holidays. We also offer an Employee Assistance Program (EAP) that provides services like virtual counseling, financial services, legal services, life coaching, etc.

Pay Disclaimer:

The pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Senior Associate, Business Transformation

Location: Greater Columbus, Ohio

About the Opportunity

We are partnering with a fast-growing, global organization to find a Senior Associate, Business Transformation for a highly visible team focused on improving key business processes across the company.

This team operates like an internal consulting group and partners across functions to solve problems, improve workflows, support systems-related initiatives, and help the business scale more effectively.

This is an excellent opportunity for someone with strong analytical ability, business curiosity, and a process improvement mindset who wants broad exposure, meaningful work, and long-term growth. The right person will be able to think through ambiguity, stay organized, communicate well, and contribute in a fast-moving environment.

Why This Opportunity Stands Out

• Opportunity to learn from an experienced, high-performing team
• Strong exposure to business operations, systems, and cross-functional initiatives
• Fast-growing company with meaningful career growth potential
• Visible role with direct involvement in important business projects
• Strong benefits package, including:
• Comprehensive medical, dental, vision, life insurance, and more
• 10 holidays
• 5 weeks of vacation
• 401(k) match
• Several additional incentives
• Compensation: $70k to $105k base salary (if interested but you need more to consider, just let me know and I will ask.

What You’ll Do

• Support business process improvement projects across Order to Cash, Purchase to Pay, New Product Development, and Sales, Inventory, and Operations Planning
• Help plan, coordinate, and execute cross-functional initiatives
• Build and maintain project schedules, milestone trackers, meeting documentation, process maps, standard operating procedures, and role/responsibility documentation
• Assist with current-state assessments, future-state process design, root cause analysis, and implementation planning
• Gather information from stakeholders, organize findings, and help translate business needs into actionable next steps
• Support improvements tied to enterprise systems such as Oracle or SAP
• Prepare reports, dashboards, status updates, presentations, and analysis to support decision-making
• Help identify process gaps, workflow inefficiencies, and opportunities for simplification or automation
• Participate in working sessions and help keep projects moving forward across multiple stakeholders
• Contribute to training, documentation, and change adoption efforts as needed

What We’re Looking For

• 2 to 4+ years of relevant experience in business analysis, consulting, project coordination, operations, finance transformation, process improvement, supply chain, or related work
• Strong analytical and problem-solving skills
• Ability to operate effectively with limited structure and shifting priorities
• Strong communication skills and comfort working with a range of stakeholders
• Organized, proactive, and able to manage multiple priorities at once
• Curiosity, initiative, and a desire to learn quickly
• Strong attention to detail and follow-through
• Bachelor’s degree preferred in business, finance, accounting, engineering, supply chain, information systems, economics, computer science, or a related field

Preferred Qualifications

• Exposure to business process improvement, transformation, operational excellence, or internal consulting work
• Experience with Oracle, SAP, or other enterprise platforms
• Familiarity with Excel, Power BI, or other reporting and project coordination tools
• Exposure to manufacturing, custom product environments, or complex business operations is helpful
• Interest in artificial intelligence tools and how they can improve workflows is a plus

Ideal Profile

This role is well suited for someone who is bright, adaptable, and eager to grow. You do not need every answer on day one, but you should know how to think through a problem, ask smart questions, and help create structure where little exists. You should be comfortable in a fast-paced environment and excited by the chance to take on visible, meaningful work.

Interested?

Please apply today for consideration as interviews are currently being conducted.

This position is not eligible for sponsorship. US Citizenship or Green Card is required.

Job Description:

Our clients growing manufacturing facility is dedicated to producing innovative products that meet the highest standards of quality and reliability of consumer package goods. As they continue to grow and expand their operations, we are seeking a skilled and experienced Maintenance Technician to join our team.

The Maintenance Technician will be responsible for performing a variety of maintenance tasks to ensure the efficient operation of our manufacturing facility. Reporting to the Maintenance Manager, this individual will primarily focus on electrical maintenance and troubleshooting, as well as general maintenance duties within a manufacturing environment. The ideal candidate will have a strong background in electrical systems and maintenance, with experience working in a manufacturing setting.

Key Responsibilities:

• Perform routine preventive maintenance tasks on manufacturing equipment, including electrical systems, motors, conveyors, and other machinery.
• Troubleshoot electrical and mechanical issues to identify root causes and implement timely repairs to minimize downtime.
• Conduct regular inspections of equipment and facilities to identify potential maintenance issues and safety hazards.
• Maintain accurate records of maintenance activities, including work orders, equipment logs, and inventory of spare parts.
• Collaborate with production teams to schedule maintenance activities and minimize disruptions to production schedules.
• Assist in the installation, setup, and commissioning of new equipment and machinery as needed.
• Ensure compliance with safety regulations and company policies by following proper procedures and using personal protective equipment (PPE) as required.
• Participate in training programs to enhance technical skills and stay current with industry best practices and technologies.
• Support continuous improvement initiatives by identifying opportunities to optimize equipment performance and reduce maintenance costs.
• Perform other duties as assigned by the Maintenance Manager or supervisor.

Qualifications:

• High school diploma or equivalent; technical certification or associate degree in electrical or mechanical engineering preferred.
• Minimum of 3-5 years of experience in maintenance, with a focus on electrical systems and troubleshooting.
• Strong knowledge of electrical principles, including wiring, circuits, motors, and controls.
• Experience working with PLCs (Programmable Logic Controllers) and automated control systems is highly desirable.
• Demonstrated ability to read and interpret electrical schematics, blueprints, and technical manuals.
• Proven experience in preventive maintenance programs and reliability-centered maintenance practices.
• Ability to work independently with minimal supervision and prioritize tasks in a fast-paced manufacturing environment.
• Excellent troubleshooting and problem-solving skills, with a keen attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively as part of a team.
• Flexibility to work occasional weekends, evenings, or overtime as needed to support production schedules and emergency repairs.

Centurion Selection are currently partnering with a well-established commercial MEP contractor with a strong reputation across Ohio and the Midwest. Due to continued growth and a strong pipeline of work, the business is seeking to appoint a Chief Estimator to lead their preconstruction function from their Columbus office.

This role offers the opportunity to take ownership of the estimating department, working closely with executive leadership to shape bid strategy and support the delivery of complex commercial mechanical, HVAC, plumbing, and electrical projects.

The position will suit a senior estimating professional or existing Chief Estimator who is looking to step into a role with greater influence, leadership responsibility, and long-term stability within a respected contractor.

The Opportunity

• Lead the estimating and preconstruction function for a well-established commercial contractor
• Oversee the preparation of large-scale commercial MEP project estimates
• Develop bid strategies and pricing structures in collaboration with senior leadership
• Build and mentor a high-performing estimating team
• Work closely with operations, project management, and clients during the preconstruction phase
• Identify value engineering opportunities and manage project risk during bid review

What They Are Looking For

• 10+ years experience in commercial construction estimating
• Strong background in mechanical, HVAC, plumbing, or MEP contracting
• Experience leading complex bids and managing estimating teams
• Ability to engage with senior leadership and influence bid strategy
• Strong understanding of commercial project delivery and cost structures

Why This Role Stands Out

• Leadership position within a highly respected contractor
• Strong pipeline of commercial and institutional projects
• Opportunity to build and shape the estimating department
• Competitive compensation and long-term career stability

Benefits

• Executive compensation reflecting experience and leadership responsibility

• Comprehensive healthcare, retirement, and PTO package

• Lead and shape the company's preconstruction strategy at a senior level

• Collaborate directly with executive leadership on major projects and bids

• Long-term leadership within a well-established, financially strong contractor

• Build and mentor a high-performing estimating team while driving growth

OSP Fiber Designer

Location: Remote

Are you a skilled Fiber Designer looking to make an impact? Join Sigma Technologies as a remote OSP Fiber Designer, specializing in FTTH, AutoCAD, and outside plant design for leading telecommunications projects. With a commitment to Safety, Honesty, Truth, and Decency, we offer a supportive and growth-oriented culture where you can thrive.

**To learn more about working at Sigma, view our career page.

**If you do not have OSP Fiber Design experience, please refer to our other open positions: **While we may list our Designer openings in multiple locations, you only need to apply to one as they are remote.

ABOUT THIS OPPORTUNITY:

Sigma Technologies has multiple Designer positions available that REQUIRE Outside Plant Fiber Design and/or Drafting Experience. For this role, we are providing FTTH, Joint Use and general OSP Overhead Fiber design services to power utility companies. We're in need of knowledgeable, already-skilled staff to join our program teams.

Note: This position can work remotely, but new hires will be required to come to our headquarters in Perrysburg, OH for an initial 2-week in-person paid orientation and training period.

Position Description:

Designers perform outside plant overhead fiber design for telecommunications companies. Designers should have knowledge of commonly-used concepts, practices, and procedures in overhead fiber design and will rely on standards, instructions, and pre-established guidelines to perform the functions of the job. The Designer is expected to apply experience and knowledge to provide solutions when guidelines will not meet expected outcomes and be able to recommend new and/or improvements to documentation where needed.

WHAT YOU CAN EXPECT TO DO AS AN OSP DESIGNER AT SIGMA:

• Executes work orders for fielding and/or design of infrastructure while meeting quality, time, and budget constraints
• Performs 2-D Civil and/or Electrical type design in CAD (i.e. AutoCAD, MicroStation, or similar program)
• Collects data by visually identifying, inspecting, and recording equipment and structures from the field and maps data collected
• Interprets general designs, data, and notes and applies established design guidelines, processes, and procedures
• Is capable of independent work on complex tasks within a competency
• Resolves problems encountered throughout the design process
• Collaborates with others (managers, designers, field techs, drafters, administration) to devise the best infrastructure solutions
• Performs kickoff/scope meetings within a given project, program, or customer to assist in specific types of route analysis, preparation of scope, and/or to assist in the preparation of bid documentation
• Performs research to identify pole ownership, right of way, property rights, and permit requirements and communicates with outside parties to obtain right-of-way approvals, and easements and coordinate the same
• Provides guidance to others for specific duties in software, processes, and procedures
• Provides quality control review
• Other duties as required

 Competencies/Skills: Telecommunications Fiber Designer | FTTH | Fiber to the Home | Fiber Optic Design | Outside Plant Design | OSP Design | Fiber Network Planning | AutoCAD | GIS Mapping | Splicing Diagrams | Aerial Fiber Design | Underground Fiber Design | Telecommunications Infrastructure | Fiber Route Analysis | Right-of-Way Permitting | Pole Loading Analysis | Microtrenching | FTTx Networks | PON Architecture | Fiber Optic Engineering | Design Standards | Telecommunications Construction | Network Optimization | Cable Pathway Design | CAD Software | Fiber Optic Drafting | Design Specifications 

WHAT WE’RE LOOKING FOR:

• EDUCATION*: HS Diploma or equivalent is required. An Associate’s degree or higher is preferred but not required. *Management may consider other combinations of education as needed.
• EXPERIENCE*: 2+ years of demonstrated design experience in the Telecom Utility Industry. *Management may consider other combinations of education and experience as needed.
• Joint-use design experience strongly preferred
• Proficiency in Computer Aided Design Programs, or similar CAD tools is required.
• Ability to read and comprehend engineering schematics
• Knowledge of construction and planning procedures
• Strong technical knowledge and skills
• Ability to learn and operate customer based proprietary software and other computer systems to expedite and facilitate the work order process
• Strong oral and written communication skills
• Basic financial skills to assist in making sound business decisions
• Able to work in all weather conditions
• Willing to travel overnight during the week
• Dependable transportation and valid driver’s license and insurance
• Able to pass a background check/drug test/driving record check
• Computer literate – especially Microsoft Word, Excel, Outlook
• Authorized to work in the United States

Physical Requirements:

• Must be able to endure frequent, lengthy periods of sedentary work and sit for prolonged periods of time, including sitting at a desk and driving in a vehicle.
• Must be able to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time.
• Must have the physical ability to perform activities such as preparing and analyzing data and figures, transcribing notes, and viewing a computer terminal; these activities require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Must have the physical ability to express or exchange ideas by means of the spoken word and convey detailed or important spoken instructions to other workers accurately, often in a group setting.
• Must have the ability to receive detailed information through oral communication.
• Must be able to work M-F 8-5 PM Eastern (7 AM-4 PM Central, 6 AM-3PM Mountain, 5 AM-2 PM Pacific)

WHAT WE OFFER: We want our Associates to stay healthy, happy, and secure! We offer you a positive work environment with supportive coworkers, managers, and leaders, plus:

• Competitive pay
• Medical, dental and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of a job. The individual may be required to perform job-related responsibilities and tasks other than those stated in this description.

This advertisement does not constitute an employment agreement between Sigma and the employee and is subject to change by Sigma as the needs of the organization and/or the requirements of the function change.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and will not discriminate based on an employee’s race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any other classification protected by law.

PM22

#Remote

PIa2c5343d7ffb-3631

Please note: Candidates must be authorized to work in the U.S. without current or future sponsorship. This role is not available for C2C.

We’re partnering with a well-established manufacturer of industrial food processing equipment to find a Technical Customer Service & Order Management Specialist to join their growing team in Columbus.

This role sits at the center of the business — acting as the key link between customers, sales, engineering, and operations — ensuring orders are processed accurately, delivered on time, and customers are fully supported throughout the lifecycle.

What You’ll Be Doing:

Customer Support

• Serve as a primary point of contact for customer inquiries (parts, service, equipment)
• Provide basic technical support and identify customer needs
• Communicate order status, lead times, and updates proactively

Order Management & Systems

• Enter and manage orders within ERP systems
• Maintain accurate records in CRM platforms
• Process quotes, acknowledgments, and order changes
• Ensure accuracy across pricing, configurations, and part numbers

Logistics & Fulfillment

• Coordinate shipments with internal teams
• Track deliveries and ensure on-time fulfillment
• Resolve shipping issues and communicate updates to customers

Cross-Functional Collaboration

• Partner with Sales, Engineering, Manufacturing, and Shipping teams
• Ensure alignment on timelines, requirements, and customer expectations

Continuous Improvement

• Identify opportunities to improve processes and customer experience
• Support aftermarket growth through responsiveness and efficiency

What We’re Looking For:

• 2–5 years of experience in customer service, order management, or similar role
• Experience with ERP and/or CRM systems
• (Salesforce, SyteLine, or Pacejet highly preferred)
• Strong communication and organizational skills
• Technical aptitude — experience in manufacturing, equipment, or industrial environments is a plus
• Detail-oriented with the ability to manage multiple priorities

What Success Looks Like

• High order accuracy with minimal errors
• Fast, professional response times to customers
• Strong internal coordination across teams
• Consistent on-time delivery performance

Why Join?

• Be part of a stable, growing, family-owned company with a strong reputation in the industry
• Known for a collaborative, down-to-earth culture where people tend to stay long-term
• High visibility role with the opportunity to grow into aftermarket, service, or leadership paths
• Work closely with multiple teams and make a direct impact on customer experience

If you enjoy working at the intersection of customer interaction, technical products, and operations, this is a great opportunity to step into a high-impact role.

Message me directly or apply here to learn more.