Engineering Geology Jobs in Nm

• 
  
• Analyze malfunctions and repair all two and four stroke engine driven equipment as required to ensure proper working condition for the customer
  
• Conduct preventive maintenance to avoid unnecessary repairs and down time
  
• Perform safety inspections on equipment
  
• Create work order and assess time and cost of repairs
  
• Maintains a clean and safe shop work environment
  
• Adhere to all governmental, company and equipment related safety requirements
  

• 
  
• A minimum of 2-5 years experience in diagnosing and repairing 2 and 4 stroke engines
  
• Rental experience preferred
  
• Good reading and comprehension skills
  
• Good customer service and communication skill
  
• The ability to consistently lift up to 50 pounds
  
• Must have your own tools
  
• Have a valid driver's license
  

Project Controls Engineer 4

Compa Industries is searching for qualified candidates for a Senior Project Controls Engineer position at the Los Alamos National Laboratory in Los Alamos, NM.

Salary: $85/hr - $90/hr

Location: Los Alamos, NM (Onsite)

Citizenship: US citizenship Required

Work Schedule: 9/80 schedule

The Project Controls Engineer will play a critical role in supporting the Earned Value Management System (EVMS) and the broader Project Controls System at Los Alamos National Laboratory (LANL). This position significantly influences the success of high-impact projects through expert cost engineering, scheduling, and project management support. The specialist will contribute to developing advanced techniques and standards, guiding project teams, and ensuring projects remain on schedule and within budget.

Responsibilities and Duties

• Perform cost estimating, cost analysis, and control activities for highly complex projects.
• Supervise and provide technical direction for planning/scheduling and cost engineering activities.
• Develop and maintain project schedules and monitor progress against milestones.
• Prepare, review, and present detailed cost engineering and scheduling reports.
• Analyze cost trends and schedule performance for management attention.
• Provide innovative solutions to project control challenges and guide technical teams.
• Act as a subject matter expert in EVMS tools and processes.
• Utilize independent judgment to determine the best course of action for achieving project objectives.
• Work under consultative direction and with minimal supervision to meet long-range project goals.
• Support project administrative and organizational tasks, including financial reporting and status updates.

Minimum Qualifications

Demonstrated experience in project controls functions, including:

• Planning and scheduling (development, control, analysis)
• Cost engineering (estimating, control, financial reporting, and analysis)
• Proficiency in multiple software applications used for project controls and cost analysis.
• Experience with supervision, personnel administration, and technical training.
• Understanding of financial reporting systems and cost control procedures.
• Ability to work independently with wide latitude in methods and evaluation criteria.

Desired Skills

• Subject matter expertise in project management and EVMS.
• Proven ability to implement corrective actions and monitor project progress.
• Familiarity with engineering principles related to technical project implementation.
• Knowledge of control account management (CAM) duties and responsibilities.
• Strong analytical skills with the ability to develop innovative solutions to complex issues.
• Viewed as an expert in the field with the ability to guide the development of future concepts and project methodologies.

Education and Experience Requirements

• Bachelor's degree in a relevant field.
• Minimum of twelve (12) years of related experience.
• An equivalent combination of education and experience may be considered.
• Post-graduate coursework or certifications in project controls or engineering disciplines is preferred.

Next Steps

If you are a driven and highly experienced project controls professional seeking a pivotal role in national security and scientific innovation, we encourage you to apply. Please submit your resume to be considered for this opportunity at Los Alamos National Laboratory. A recruiter from Compa Industries will contact qualified candidates to discuss next steps.

Why Work at COMPA Industries?

We strive to provide careers, not just jobs, for our employees. We invest in and serve the communities where we work and live. We provide best-in-class administrative, professional, and technical services to solve complex problems to meet customer mission-critical objectives.

For over 30 years, Compa has been a trusted partner in progress. We combine decades of technical expertise with a forward-thinking spirit, tackling intricate challenges in nuclear facilities alongside the brightest minds in science and engineering. Join us, and don't just build your career, build the future, with competitive compensation, a collaborative culture, and the chance to make a real difference for national security and beyond.

COMPA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or protected Veteran status.

COMPA's policy could disqualify an applicant who has certain criminal history from employment in particular positions.

If your passion is flying and you want to work in an environment where every second counts, contact us today!

Position:  Fixed Wing Pilot

Location : Albuquerque, NM

Airframe:  King Air 200

Schedule: 7 Days On and 7 Days Off

Annual Salary Range: $106,939 - $117,633

• 15,000 Sign-On Bonus (Must Complete Training and Check-Ride).
• 40,000 Retention Bonus (There is a 6 Month Waiting Period and This is a 3 Year Program).
• Up to 3,000 in Relocation Assistance. 
• Company Paid Crew Housing.

We’re hiring a fixed wing King Air 200 Pilot to provide medical air transportation services to our customers. This pilot will be qualified to fly our King Airplanes. Scheduled shifts run 7/7 and service day or night trips. Safety is a key pillar of our services; therefore, all of our pilots work on a quality, professional team that are committed to high safety standards for the crew and our customers.

Responsibilities:

• Pilot will work with a team of medical experts to safely transport customers to and from locations and facilities.
• Ensure aircraft readiness for flight dispatches as described in the appropriate manuals, including all FAR and company requirements, and aircraft cleanliness duties.
• Maintain accurate company and regulatory documentation and record keeping for shifts, load manifests, etc.
• Effectively communicate and collaborate with both air and ground dispatch, flight crews, facilities and partners.
• Provide shift change info to transitioning pilot and team and follows protocols for recording company change board details.
• Pilots are accountable to maintain required certifications and ongoing ground and air training.

Minimum Required Qualifications

• Commercial Airplane Multi Engine Land (C-AMEL) Required. 
• Must be willing and able to obtain ATP within 5 years of employment.
• The ideal candidate will have single pilot IFR experience.
• Ability to provide logbooks listing all flight dates and corresponding hours, along with a cumulative total that substantiates the time reported on the resume.
• Previous medevac and/or cargo experience preferred.
• Valid and unexpired driver's license.
• Current FAA First or Second Class Medical Certificate.
• 2,500 Total Flight hours.
• 1,000 PIC hours.
• 500 Cross Country hours.
• 500 Multi-Engine hours.
• 100 Night hours.
• 75 Instrument (50 actual) hours.

Preferred Education:

• Minimum of a High School Diploma, GED equivalent, or higher.  

Working Conditions:

• Required to work in outside weather conditions.
• May need to deice the plane, assist with towing the aircraft and maneuvering in and out of the hangar, prep the plane for flight.

Why Choose GMR? Global Medical Response (GMR) and its family of solutions are dedicated to delivering compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. Here you’ll embark on meaningful work that will make an impact on you and the customers we serve. View the stories on how our employees provide care to the world at  .

GMR’s Core Behaviors —keep care at the center, raise your hand, seek to understand, find a way together and be accountable—unite our teams and set us apart in emergency medical services. 

Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability.

Check out our careers site to learn more about our benefit options.

Project Controls Engineer 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $91/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor's degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft Integration) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management systems, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

Basic Success Criteria

• Bachelor's Degree in Mechanical, Electrical, Aerospace, Systems Engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Success Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Albuquerque, NM, but will require frequent travel to San Martin, California.

Must be willing to travel 30% of the time (primarily training in San Martin, CA).

The estimated salary range for this position is $135,000 to $190,000. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $135K - $190K

HukariAscendent is a Women-Owned, Small Business specializing in comprehensive engineering and technical support services associated with commercial nuclear power and other Department of Energy (DOE) nuclear activities.

Job Title: Operations Specialist 4

Duration: 12 months with extension

Location: Los Alamos, NM

Summary:

Day-to-day technical interface between the facility operations organization and the programmatic tenants in a laboratory room or a collection of rooms. Assists in the day-to-day business operations functions and in the development and delivery of facility operations-focused programs, policies, processes, and procedures in support of safe and compliant facility operations. Duties may include, but are not necessarily limited to, providing guidance on governmental regulations and Laboratory guidelines; conducting incident and general issues management investigations and reporting; participating in or supporting readiness reviews for operations; supporting the activity approval process; developing and maintaining required operational documentation and procedural manuals; planning and budgeting; and providing other compliance and/or quality-related support functions including development of training, delivery of facility-level training, tracking and assurance of employee training; property accountability, and access control. Provides other operational/administrative support functions as required.

Required Qualifications:

A recognized bachelor’s degree in engineering or a technical discipline and minimum of eight (8) years related experience or combination of education and relevant experience. 15 or more years’ experience in the construction field and 5 years of experience supporting the DOE mission is highly desired. Previous qualifications as an Electrical Field Work Supervisor, Field Work Supervisor, or Responsible (Line) Manager, and previous work experience in a DOE Plutonium facility are preferred. Prior DOE experience in construction or D&D projects and experience in a work control setting with alignment to quality control, assurance and managing complex issues under NQA-1 is preferred.

HukariAscendent offers an excellent benefits package including medical, dental, vision, and life insurance, 401(k) plan, and paid time off.

Opportunities with HukariAscendent change frequently. For a complete listing of our current openings, please visit our website at is an Equal Opportunity/Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, religion, creed, national origin, sex, marital status, sexual orientation, veteran or military status including disabled veterans and Vietnam era veterans, or other protected status.

HukariAscendent maintains a drug-free workplace.

About Castelion

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapon systems to give America and its Allies a definitive edge and deter future conflicts.

EHS Manager (Rio Rancho)

The EHS Manager will lead Environmental, Health, and Safety efforts for Castelion's Rio Rancho, New Mexico facility, supporting solid rocket motor manufacturing, integration, and test operations. This role is responsible for building and managing site EHS programs to ensure safe operations and regulatory compliance within a fast-paced, high-hazard manufacturing environment.

The EHS Manager will play a key role in facility startup, commissioning, and ramp to production, partnering closely with operations, engineering, and leadership to embed safety and environmental stewardship across development and manufacturing. The ideal candidate brings experience in process safety, hazard analysis, and regulatory compliance in aerospace, manufacturing, energetics, or other high-consequence environments, and will also provide periodic EHS support to Castelion's Midland, Texas test facility.

Responsibilities

• Serve as the EHS leader for the Rio Rancho facility, responsible for developing and managing site EHS programs, systems, and policies to ensure safe operations and regulatory compliance.
• Lead EHS planning and execution during facility startup, commissioning, and ramp to production, partnering with operations and engineering to integrate safety and environmental requirements into processes, equipment, and daily operations.
• Develop and maintain process safety and risk management programs, including hazard analyses (HAZOP, LOPA, FMEA) and risk assessments to identify and mitigate operational hazards.
• Ensure compliance with OSHA, EPA, ATF, NFPA, and applicable state and local regulations, including oversight of environmental programs such as hazardous waste, air emissions, stormwater management, and regulatory reporting.
• Implement and continuously improve safety programs through audits, inspections, training, and safety initiatives that strengthen operational discipline and safety culture.
• Lead incident investigations and root cause analysis for safety or environmental events, implementing corrective and preventive actions and maintaining site emergency response plans and preparedness.
• Provide periodic EHS support to Castelion's Midland, Texas facility, including audits, incident support, and program development as needed.

Basic Qualifications

• Bachelor's degree in Environmental Health & Safety, Environmental Engineering, Chemical Engineering, Industrial Engineering, Safety Engineering, or a related technical field.
• 5+ years of experience supporting EHS and process safety programs in manufacturing, test, or other high-hazard operational environments.
• Experience implementing process safety management and hazard analysis techniques (HAZOP, LOPA, FMEA).
• Strong working knowledge of OSHA, EPA, ATF, NFPA, and applicable state and local regulations.
• Experience leading incident investigations and corrective action programs.
• Hands-on experience developing and implementing EHS programs in manufacturing or test environments.
• Strong communication and leadership skills with the ability to influence cross-functional teams.
• Willingness and ability to travel periodically to support Midland, Texas operations.

Preferred Skills and Experience

• Professional certification such as CSP, CIH, or similar.
• Experience supporting solid rocket motor manufacturing, propulsion systems, energetics, or explosive/high-energy material operations.
• Experience supporting facility startup, commissioning, or greenfield manufacturing site development.
• Familiarity with EHS management systems such as ISO 14001 and ISO 45001.
• Experience applying continuous improvement and risk-based safety methodologies.

All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers three weeks of paid time off per year.

Leadership Qualities

Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support.

High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity.

Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity.

ITAR Requirements:

• To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

We put the unity in \"opportunity.

Opportunity Snapshot:

• Compensation: $55/hour
• Location: Carlsbad, NM
• Assignment Duration: 12 months+
• Work Schedule: Monday-Friday, 40 hours +
• Benefits: Comprehensive with 401K, holidays and PTO

Qualifications:

• Previous experience in a closely related position
• Associates degree in Drafting or equivalent from a two-year college or technical school
• General knowledge of 2D CAD software AutoCAD/Microstation/Bluebeam
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications
• Strong in Oil & Gas
• High School diploma or equivalent required

Responsibilities:

• Transforms complex rough product designs into working documents using computer aided design (CAD)
• Develop computer generated drawings, isometrics, details, plans, schedules, and data sheets
• Prepare dimensional drawings for layouts and non-dimensional drawings such as one lines, etc
• Revises drawings based on instructions from engineers, etc
• Communicate effectively and work with other members of the design team of each individual project assignment. Interface management across disciplines
• Document control support, database administration, and progress reporting
• Coordination and communication of various issues among the company and contractor's engineering team that affect the discipline engineering drawings
• Keep Supervisor informed of discipline engineering progress, deviations, and execution concerns
• Support internal engineering general interest or Global Practice initiatives as requested by Supervisor

The Bergaila Way:

The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice.

Client Overview:

Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

• Leading the Naval network warfare missions in developing tactics and procedures to realize tactical, strategic and business advantages afloat and ashore
• Driving interoperability with joint, allied and coalition partners
• Building professional excellence through education, training and certification and milestone qualifications
• Optimizing organizational effectiveness through cutting-edge technologies, knowledge management techniques and a culture of innovation
• Helping to develop and deploy information systems, command and control and space systems
• Serving as a key part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries
• Overseeing the work of Information Systems Technicians - Enlisted Sailors (no degree required) who serve as specialists in information technology

• Serving as part of Battle Group staffs on ships at sea
• Working in C4I/Space/Surveillance on shore tours
• Serving on major Navy and joint staffs
• Serving in command of key communication and surveillance facilities around the globe

• Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
• Completing Joint Professional Military Education (JPME) at one of the various service colleges

Project Controls 4

Location: Los Alamos, NM (Onsite)

Schedule: 9/80 Work Schedule

Pay Rate: $85/hr – $95/hr

Assignment Duration: 1 Year

Positions Available: 2

Position Overview

We are seeking an experienced Project Controls 4 to support project execution activities at Los Alamos National Laboratory (LANL). This role provides senior-level expertise in project planning, scheduling, cost engineering, and Earned Value Management (EVMS) to ensure successful delivery of complex technical projects.

The ideal candidate will have extensive experience in project controls systems, cost estimating, schedule development, and financial analysis, with the ability to identify cost and schedule trends and provide actionable recommendations to project leadership.

This position works under consultative direction and may provide technical oversight and leadership for project controls teams, ensuring compliance with project objectives, schedules, and financial targets.

Key Responsibilities

• Support and maintain the Earned Value Management System (EVMS) and project controls processes.
• Perform cost estimating, cost analysis, cost control, and financial reporting activities for complex projects.
• Develop, maintain, and monitor project schedules, ensuring alignment with project milestones and deliverables.
• Identify cost and schedule trends and provide analysis and recommendations to project leadership.
• Supervise or provide technical direction for planning, scheduling, and cost engineering activities.
• Prepare and review cost reports, schedule analysis, and project performance metrics.
• Support project organizational and administrative activities including budget tracking and performance monitoring.
• Provide innovative solutions to cost and schedule challenges on complex technical projects.
• Develop advanced concepts, techniques, and standards to improve project control performance.
• Collaborate with cross-functional teams to ensure project objectives are achieved on time and within budget.

Required Qualifications

• Bachelor's degree in Engineering, Construction Management, Project Controls, or related field.
• 12+ years of related project controls experience or equivalent combination of education and experience.
• Strong experience with cost estimating, cost control, and financial analysis for large projects.
• Demonstrated experience with schedule development, monitoring, and analysis.
• Experience supporting EVMS-based project environments.
• Strong analytical, organizational, and communication skills.
• Proficiency with Microsoft Office (Excel, Word, and related tools).
• Ability to work independently and provide leadership on complex project assignments.

Preferred Qualifications

• Experience working in DOE, NNSA, or federal project environments.
• Prior experience supporting engineering, construction, or technical programs.
• Experience working as a Control Account Manager (CAM) or supporting project budgets and financial reporting systems.
• Knowledge of project financial status reporting and earned revenue tracking.

Work Environment

• Onsite position located in Los Alamos, NM.
• 9/80 work schedule.
• Work performed in a non-secure area with no clearance required for start.
• Position supports project activities within the PC organization at LANL.

Compensation & Benefits

• Hourly Pay: $85/hr – $95/hr
• Potential short-term per diem available for qualifying candidates.
• Opportunity to work on high-impact national laboratory projects.

Equal Opportunity Employer

COMPA Industries is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics.

Notice to Recruiting Agencies

COMPA Industries does not accept unsolicited resumes from third-party recruiting agencies.

No C2C or agency submissions will be accepted.