Engineering Geology Jobs in Fl Remote
590 positions found — Page 11
REQUIREMENTS AND PREFERENCES
The Broward County Board of County Commissioners is seeking qualified candidates for Capital Project Management Supervisor - Construction Management Division.
Please Note: This announcement will remain open until sufficient number of applications are received and may close at any time.
The ideal candidate will have experience managing vertical construction projects with an aptitude for and an ability to manage a variety of challenging projects. The candidate will possess experience in preparation of scope, budget, schedule, documents for the selection of consultants, negotiating agreements, management of projects through all phases of development including planning, programming, design, bid documentation, procurement, construction administration, and warranty administration as well as the oversight of design consultants, contractors, and stakeholders.
The top candidate will have experience in the latest construction methods and technology including Building Information Modeling (BIM), document control programs, and scheduling programs. The ideal candidate will also be a LEED accredited professional or possess a WELL Building Standard accredited professional designation and experience along with an enthusiasm and passion for resiliency and sustainability.
General Description
Performs advanced professional and administrative work with supervisory responsibilities in the management of construction projects for the County.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in architecture and/or engineering or closely related field; Master's degree preferred.
Requires six (6) years in professional architectural or engineering work, including four (4) years of experience in project management and supervision of staff appropriate to the area of assignment or closely related experience.
Special Certifications and LicensesRegistration as a professional architect or registered engineer or NCIDQ (Space Planning Only) based upon area of assignment.
Preferences* Master's Degree in Architecture, Engineering, Construction Management, Urban Design, Master Planner, or closely related field* LEED Accreditation
* Project Management Professional (PMP) Certification
* Certified Master Planner
* Crime Prevention Through Environmental Design (CPTED) certification and/or Emergency Management certification
* Licensed Interior Designer or NCIDQ certification
* Five years of experience in accounting principles relative to project budgeting and project cost controls
* Five years of experience supervising and managing all phases of multiple vertical mid-scale construction projects concurrently.
* Five years of experience in government contract procurement and management of complex, large-scale vertical construction projects and experience in public sector construction project management
* Five years of experience with Building Information Modeling (BIM) and Virtual Design and Construction methodologies.
SCOPE OF WORK
Duties and Responsibilities
The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.
Manages and monitors construction contractors and consultants; develops, administers and negotiates construction and consultant contracts, master plan studies, amendments, change orders, and work authorizations.
Coordinates stakeholders including user and County agencies: County Attorneys, Purchasing, Small Business Division, Building Departments; FDOT and other regulatory agencies.
Supervises other project managers and engineering technicians; performs reviews and oversight of projects managed by subordinates; reviews plans and specifications, engineering calculations, pay applications, invoices, and Florida Building Code.
Reviews project progress and resolves design and construction related issues; negotiates fees and scope with consultants; designs projects, signs and seals construction documents, permit applications and reports.
Assists with contract developments and bidding process; reviews bids for conformance to construction documents; administers and manages consultant and contractor contracts for adherence and performance.
Establishes a Quality Control/Quality Assurance (QC/QA) Project Program and procedures for the Project Management Section and the Division to standardize the project management process, improve quality and performance.
Carries out special assignments requested by Division Director; meets with subordinates to review the status of their assigned projects; prepares job performance evaluations for subordinates.
Conducts meetings with consultants and contractors to review progress of work and manage all aspects of the project; reviews and approves invoices and payment requests from consultants and contractors; assists in the preparation of new fiscal year budget requests.
Performs related work as assigned.
Competencies- Financial Acumen: Interprets and applies key financial indicators to make better business decisions. Fosters accountability for making good financial decisions; provides guidance to help the team make astute decisions. Summarizes financial performance data and explains implications for the organization.
- Manages Complexity: Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems. Asks questions to encourage others to think differently and enrich their analyses of complex situations. Accurately defines the key elements of complex, ambiguous situations.
- Decision Quality: Makes good and timely decisions that keep the organization moving forward. Consistently demonstrates strong judgment; may be sought out by others for expertise and guidance. Takes smart, independent action in urgent and non-routine situations, knows when to escalate for others' involvement.
- Balances Stakeholders: Anticipates and balances the needs of multiple stakeholders. Provides guidance so that others understand the needs of different stakeholders and can balance them appropriately. Makes sure people understand and adhere to ethical standards when working with stakeholders; models and ensures cross-cultural sensitivity.
- Plans and Aligns: Plans and prioritizes work to meet commitments aligned with organizational goals. Makes nimble plans accounting for a range of risks and contingencies. Achieves greater cohesion, integration, and alignment between own group and other areas. Both persistent in adversity and nimble in change.
- Ensures Accountability: Holds self and others accountable to meet commitments. Tracks performance and strives to remain effective, learning from both successes and failures. Readily takes on challenges or difficult tasks and has reputation for delivering on commitments.
- Drives Results: Consistently achieves results, even under tough circumstances. Emphasizes the importance of results; encourages a sense of urgency in others; challenges poor outcomes or unproductive behaviors. Provides assistance or encouragement to help others over obstacles.
- Develops Talent: Develops people to meet both their career goals and the organization's goals. consistently shares ideas, insight, and best practices to help people reach their development goals and achieve optimal results. Shares targeted feedback in a prompt, constructive, and encouraging manner.
- Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Tailors communication content and style to the needs of others. Pays attention to others' input and perspectives, asks questions, and summarizes to confirm understanding.
- Situational Adaptability: Adapts approach and demeanor in real time to match the shifting demands of different situations. Serves as an example of adaptability and provides guidance and support to help others adapt to new situations. Considers the needs of clients, constituents, and the organization; shifts priorities appropriately.
WORK ENVIRONMENT
Physical Demands
Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.
Performs light work that involves walking or standing most of the time and involves exerting up to 20 pounds of force on a regular and recurring basis, or skill, adeptness and speed in the use of fingers, hands or limbs on repetitive operation of electronic office equipment or tools within moderate tolerances or limits of accuracy.
Unavoidable Hazards (Work Environment)Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.
None.
SPECIAL INFORMATION
County Core Values
All Broward County employees strive to demonstrate the County's four core behavioral competencies.
- Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
- Customer focus: Building strong customer relationships and delivering customer-centric solutions.
- Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
- Values differences: Recognizing the value that different perspectives and cultures bring to an organization.
Copyright 2025 Korn Ferry. ALL RIGHTS RESERVED
Americans with Disabilities Act (ADA) ComplianceBroward County is an Equal Opportunity Employer committed to inclusion. Broward County is committed to providing equal opportunity and reasonable accommodations to qualified persons with disabilities. We support the hiring of people with disabilities; therefore, if you require assistance due to a disability, please contact the Professional Standards Section in advance at or email to make an accommodation request.
County-wide Emergency ResponsibilitiesNote: During emergency conditions, all County employees are automatically considered emergency service workers. County employees are subject to being called to work in the event of a disaster, such as a hurricane, or other emergency situation and are expected to perform emergency service duties, as assigned.
County-wide Employee ResponsibilitiesAll Broward County employees must serve the public and fellow employees with honesty and integrity in full accord with the letter and spirit of Broward County's Employee Code of Ethics, gift, and conflict of interest policies.
All Broward County employees must establish and maintain effective working relationships with the general public, co-workers, elected and appointed officials and members of diverse cultural and linguistic backgrounds, regardless of race, color, religion, sex, national origin, age, disability, marital status, political affiliation, familial status, sexual orientation, pregnancy, or gender identity and expression.
The Opportunity
The Department of Mechanical and Aerospace (MAE) at the University of Central Florida (UCF) in Orlando, Florida, invites applicants for multiple 9-month, full-time, non-tenure earning lecturer or associate lecturer positions with an anticipated start date of August 08, 2026. The selected candidates will be primarily responsible for teaching undergraduate courses and some graduate courses in mechanical or aerospace engineering offered by the department.
The MAE Department offers B.S., M.S., and Ph.D. degree programs. Both BSAE and BSME programs are ABET-accredited. The reputation of the department and university is continually growing with numerous faculty achievements including NSF CAREER awards, an ONR Young Investigator Award, and fellowships in professional societies. More information about the department can be found at Qualifications:
An earned doctorate from an accredited institution in mechanical engineering, aerospace engineering or a closely related field at the time of application.
An associate lecturer must also have at least five years of full-time teaching experience in a higher education institution.
Preferred Qualifications:
Excellent written and oral communication skills in English.
Previous teaching experience at the university level in the United States.
Commitment to teaching excellence and passion for engineering education research.
Demonstrated teaching effectiveness in mechanical and aerospace engineering courses.
Additional Application Materials Required:
UCF requires all applications and supporting documents be submitted electronically through the Human Resources employment opportunities website, addition to the online application, candidates should upload a cover letter, and a current curriculum vitae.
The selected candidate will be required to submit official transcripts (and, as applicable, U.S. degree equivalency evaluations) documenting the conferral of their qualifying academic credentials.
NOTE: Please have all documents ready when applying so they can be simultaneously uploaded. Once the online submission process is finalized, the system does not allow applicants to submit additional documents later.
Questions regarding this search should be directed to: Diana Perez, Administrative Assistant III, at .
Special Instructions to the Applicants
Sponsorship for employment-based visas will only be considered under exceptional circumstances and is not guaranteed. Preference will be given to candidates who are currently authorized to work for any employer in the United States.
Job Close Date:
Open until filled.
Note to applicants: Please keep in mind that a job posted as 'Open until filled' may close at any time without notice. As such, we encourage you to submit your application and all required documentation as quickly as possible to ensure consideration for the posted position.
Are you ready to unleash YOUR potential?
As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 13 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills and you'll have countless rewarding experiences that go well beyond a paycheck.
Working at UCF has its perks!UCF offers:
- Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program.
- Paid time off, including annual (12-month faculty) and sick time off and paid holidays.
- Retirement savings options.
- Employee discounts, including tickets to many Orlando attractions.
- Education assistance.
- Flexible work environment.
- And more...For more benefits information, view the UCF Employee Benefits Guide click here.
Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.
Additional Requirements related to Research Positions:
Pursuant to Florida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCF is required to conduct additional screening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.
The additional screening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, post-doctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.
Department
College of Engineering and Computer Science (CECS) - Mechanical and Aerospace Engineering (MAE)Work Schedule
VariesType of Appointment
RegularExpected Salary
NegotiableAs a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.
UCF is proud to be a smoke-free campus and an E-Verify employer.
If an accommodation due to a disability is needed to apply for this position, please call or email .
For general application or posting questions, please email .
The Opportunity
As a national and world leader in space, aerospace, and hypersonics, the University of Central Florida (UCF) has established a center of excellence on this topic and is working to strengthen its research and education mission in this area.
As a part of this broad, university-wide strategic plan, the Department of Mechanical and Aerospace Engineering (MAE) invites applicants for multiple 9-month, full-time faculty positions at the rank of assistant professor (tenure-earning), or associate professor (tenured). Candidates with a strong background in hypersonics and space systems are highly encouraged to apply. Technical fields of interest include, but are not limited to:
(1) Additive and Advanced Manufacturing for Hypersonics and Space,
(2) Cryogenic and Supercritical Propellant Systems Design, Analysis and Testing,
(3) Laser Diagnostics and Sensors in Hypersonic and Extreme Environments,
(4) Mathematical Foundations of AI, Uncertainty Quantification, and Reduced Order Modeling for Hypersonics and Space,
or any related areas of research in the broader fields of hypersonics and space.
These positions have an anticipated start date of August 8, 2026. Each of these hires will strengthen UCF and MAE, and may include a combination of joint and/or secondary appointments. Both individual/interdisciplinary infrastructure and startup support will be provided with these new positions. The positions will carry a rank commensurate with the candidate's experience and record.
Each successful candidate will work at the intersection of the relevant research areas associated with the aforementioned themes. They will have research impact, as reflected in high-quality publications and the ability to build a funded and sustainable research program. We are looking for team players who can contribute to current campus efforts in hypersonics and space research.
Central Florida has long been the center of space activities. With NASA Kennedy Space Center less than an hour from Orlando, several well-known companies such as Siemens Energy, Mitsubishi Power, and Lockheed Martin have their major headquarters in Orlando. Others such as Pratt & Whitney (Raytheon), Northrop Grumman, Blue Origin, and SpaceX have their headquarters within easily drivable distances. All these companies share the same talent pools available in this region. UCF's Orlando location also puts it at the center of the Florida High Tech Corridor. The corridor has an excellent industrial base that includes software, defense, space, simulation and training, and a world-renowned entertainment industry. Adjacent to UCF is a thriving research park that conducts over $2 billion in funded research, hosting more than 100 high-tech companies and UCF's School of Modeling, Simulation, and Training. In response to this unique locational opportunity, The Center for Advanced Turbomachinery and Energy Research (CATER) was founded to focus on student training and research on turbomachinery and associated energy systems for application in power generation, aviation, and space propulsion. CATER has 9 core faculty members at present, with a staff of 5 research faculty, 15 postdoctoral researchers, and 97 doctoral students. It collectively secured $20.3M of new external funding in FY 24-25 and graduates 13 doctoral students per year on average.
The successful candidates would be part of the UCF HYPERSPACE Center ( ), a Center of Excellence (COE) for Hypersonics and Space Propulsion at the University of Central Florida. The motivation of the center is Speed and Space with the goal of achieving ultra-high-speed flight through our atmosphere, and efficient planetary entry and exit, making space exploration and intercontinental travel as routine as intercity travel is today. The center is a national and world leading center in hypersonic and space propulsion, modeling, aerodynamics, laser diagnostics/sensors, extreme environment materials, and additive/advanced manufacturing with Government and Industry funding. The center is a hub for world-class hypersonic wind tunnels and facilities, advanced hypersonic research, training and education, technology development and innovation.
UCF is one of the nation's largest universities with a diverse student body of approximately 70,000 students and has grown substantially in size, quality, diversity, and reputation. Today, the university offers more than 240 degree programs. In 2019, UCF was officially recognized as a Hispanic Serving Institution (HSI) by the U.S. Department of Education, and a "Green College" by the Princeton Review for our efforts in sustainability and environmental responsibility. The Carnegie Foundation classifies UCF as an R1 Doctoral University for its very high research activity and community engagement. For the fifth consecutive year, UCF has been recognized among the nation's most innovative universities according to U.S. News & World Report, while Kiplinger's and The Princeton Review have ranked UCF as one of the nation's best values for a college education. UCF has been the #1 supplier of aerospace and defense engineers seven years in a row as published by Aviation Week.
UCF is an economic engine, attracting and supporting industries vital to the region's future while providing students with real-world experiences that help them succeed after graduation. UCF also has an accredited medical school that was established in 2006 and is a neighbor to the Orlando VA Medical Center, Nemours Children's Hospital, and the UCF Lake Nona Medical Center. Great weather, easy access to the seashore, one of the largest convention centers in the nation, and one of the world's best airports are just a few features that make Orlando an ideal location. We encourage you to learn more about UCF at faculty.
Minimum Qualifications:
Doctoral degree from an accredited institution in an area appropriate to Mechanical and Aerospace Engineering, Materials Science and Engineering, or Applied Mathematics at the time of appointment. Each selected candidate also must have a record of scholarly publications or sponsored research related to hypersonics.
To be eligible for appointment as a tenured associate professor upon hire, the selected candidate must have a demonstrated record of research, teaching, and service commensurate with a tenured faculty appointment at that rank.
Preferred Qualifications:
The ideal candidate should demonstrate a sustained record of external research funding in hypersonics and space, as well as experience leading large, multidisciplinary proposal teams. Evidence of research productivity through publications in reputable, peer-reviewed venues is expected. Additional qualifications include experience mentoring students, a history of collaborative research, and strong proficiency in written and oral English communication. Candidates must also present a clearly articulated and focused research plan that supports collaborative and transformative work in hypersonics and space.
Additional Application Materials Required:
UCF requires all applications and supporting documents be submitted electronically through the Human Resources employment opportunities website, jobs/. In addition to the online application, interested candidates should upload the following:
A curriculum vitae.
A letter of interest describing qualifications for the position, such as research agenda and teaching experience/interest.
A 3-4 page research statement
A 1-2 page teaching statement
NOTE: Please have all documents ready when applying so they can be attached at that time. Once the online submission process is finalized, the system does not allow applicants to submit additional documents later.
The selected candidate will be required to submit official transcripts (and, as applicable, U.S. degree equivalency evaluations) documenting the conferral of their qualifying academic credentials.
Questions regarding this search should be directed to the committee at .
Special Instructions to the Applicants:
Sponsorship for employment-based visas will only be considered under exceptional circumstances and is not guaranteed. Preference will be given to candidates who are currently authorized to work for any employer in the United States.
Job Close Date:
Open until filled
Note to applicants: Please keep in mind that a job posted as 'Open until filled' may close at any time without notice. As such, we encourage you to submit your application and all required documentation as quickly as possible to ensure consideration for the posted position.
Are you ready to unleash YOUR potential?
As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 13 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills and you'll have countless rewarding experiences that go well beyond a paycheck.
Working at UCF has its perks!UCF offers:
- Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program.
- Paid time off, including annual (12-month faculty) and sick time off and paid holidays.
- Retirement savings options.
- Employee discounts, including tickets to many Orlando attractions.
- Education assistance.
- Flexible work environment.
- And more...For more benefits information, view the UCF Employee Benefits Guide click here.
Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.
Additional Requirements related to Research Positions:
Pursuant to Florida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCF is required to conduct additional screening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.
The additional screening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, post-doctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.
Department
College of Engineering and Computer Science (CECS) - Mechanical and Aerospace Engineering (MAE)Work Schedule
VariesType of Appointment
RegularExpected Salary
NegotiableAs a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.
UCF is proud to be a smoke-free campus and an E-Verify employer.
If an accommodation due to a disability is needed to apply for this position, please call or email .
For general application or posting questions, please email .
Job title: Director Network Operations Market Lead
Salary: $140k-$160k Bonus 19%
In Market, Orlando, FL (no relocation offered)
Duration: Full time/Permanent
Job Description
- Overall Purpose: Directs all outside plant engineering, planning, design, and construction activities in a geographical area. This is a supervisory role with responsibility for directing; planning; apportioning the market’s build responsibilities, including the work of employees including interviewing, selecting, and training; establishing and monitoring attainment of objectives; coaching and assessing performance; and ensuring compliance with company and regulatory policy.
Key Roles and Responsibilities:
Approves or recommends approval of long and short- range planning, specific and routine authorizations, including plans and specifications. Responsible for scheduling of work offers and the managing of the Outside Plant (OSP) budget. Responsible for contract negotiations for the performance of outside plant construction engineering and installation/repair of a specific area. Responsible for the operational effectiveness of provisioning OSP facilities relative to customer service activation and assurance. Directs and controls capital budget for outside plant for specific market area. Oversees the installation and maintenance of high-speed broadband service in assigned geography through general contractor partner. The job has direct and indirect supervisory responsibility for employees below Director level. Leader will directly manage the work performed by employees, contractors, vendors and or partners.
- Education: Typically, a bachelor’s degree in Math, Science or Engineering preferred or relevant industry experience.
- Experience: Typically requires 10 or more years of experience and at least two years of management responsibility.
- Supervisory: Yes.
- Environmental Requirements: This position may be responsible for contributing to compliance by customer's with environmental laws and regulations applicable to its job function.
The specific compensation for this position will be determined by a number of factors, including the scope, complexity and location of the role as well as the cost of labor in the market; the skills, education, training, credentials and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits including medical, dental, vision and 401K contributions as well as any other PTO, sick leave, and other benefits mandated by appliable state or localities where you reside or work
OZ – Databricks Architect/ Senior Data Engineer
Note: Only applications from U.S. citizens or lawful permanent residents (Green Card Holders) will be considered.
We believe work should be innately rewarding and a team-building venture. Working with our teammates and clients should be an enjoyable journey where we can learn, grow as professionals, and achieve amazing results. Our core values revolve around this philosophy. We are relentlessly committed to helping our clients achieve their business goals, leapfrog the competition, and become leaders in their industry. What drives us forward is the culture of creativity combined with a disciplined approach, passion for learning & innovation, and a ‘can-do’ attitude!
What We're Looking For:
We are seeking a highly experienced Databricks professional with deep expertise in data engineering, distributed computing, and cloud-based data platforms. The ideal candidate is both an architect and a hands-on engineer who can design scalable data solutions while actively contributing to development, optimization, and deployment.
This role requires strong technical leadership, a deep understanding of modern data architectures, and the ability to implement best practices in DataOps, performance optimization, and data governance.
Experience with modern AI/GenAI-enabled data platforms and real-time data processing environments is highly desirable.
Position Overview:
The Databricks Senior Data Engineer will play a critical role in designing, implementing, and optimizing enterprise-scale data platforms using the Databricks Lakehouse architecture. This role combines architecture leadership with hands-on engineering, focusing on building scalable, secure, and high-performance data pipelines and platforms. The ideal candidate will establish coding standards, define data architecture frameworks such as the Medallion Architecture, and guide the end-to-end development lifecycle of modern data solutions.
This individual will collaborate with cross-functional stakeholders, including data engineers, BI developers, analysts, and business leaders, to deliver robust data platforms that enable advanced analytics, reporting, and AI-driven decision-making.
Key Responsibilities:
- Architecture & Design: Architect and design scalable, reliable data platforms and complex ETL/ELT and streaming workflows for the Databricks Lakehouse Platform (Delta Lake, Spark).
- Hands-On Development: Write, test, and optimize code in Python, PySpark, and SQL for data ingestion, transformation, and processing.
- DataOps & Automation: Implement CI/CD, monitoring, and automation (e.g., with Azure DevOps, DBX) for data pipelines.
- Stakeholder Collaboration: Work with BI developers, analysts, and business users to define requirements and deliver data-driven solutions.
- Performance Optimization: Tune delta tables, Spark jobs, and SQL queries for maximum efficiency and scalability.
- GenAI Applications Development: It is a big plus to have experience in GenAI application development
Requirements:
- 8+ years of experience in data engineering, with strong hands-on expertise in Databricks and Apache Spark.
- Proven experience designing and implementing scalable ETL/ELT pipelines in cloud environments.
- Strong programming skills in Python and SQL; experience with PySpark required.
- Hands-on experience with Databricks Lakehouse, Delta Lake, and distributed data processing.
- Experience working with cloud platforms such as Microsoft Azure, AWS, or GCP (Azure preferred).
- Experience with CI/CD pipelines, Git, and DevOps practices for data engineering.
- Strong understanding of data architecture, data modeling, and performance optimization.
- Experience working with cross-functional teams to deliver enterprise data solutions.
- Tackles complex data challenges, ensuring data quality and reliable delivery.
Qualifications:
- Bachelor’s degree in Computer Science, Information Technology, Engineering, or a related field.
- Experience designing enterprise-scale data platforms and modern data architectures.
- Experience with data integration tools such as Azure Data Factory or similar platforms.
- Familiarity with cloud data warehouses such as Databricks, Snowflake, or Azure Fabric.
- Experience supporting analytics, reporting, or AI/ML workloads is highly desirable.
- Databricks, Azure, or cloud certifications are preferred.
- Strong problem-solving, communication, and technical leadership skills.
Technical Proficiency in:
- Databricks, Apache Spark, PySpark, Delta Lake
- Python, SQL, Scala (preferred)
- Cloud platforms: Azure (preferred), AWS, or GCP
- Azure Data Factory, Kafka, and modern data integration tools
- Data warehousing: Databricks, Snowflake, or Azure Fabric
- DevOps tools: Git, Azure DevOps, CI/CD pipelines
- Data architecture, ETL/ELT design, and performance optimization
What You’re Looking For:
Join a fast-growing organization that thrives on innovation and collaboration. You’ll work alongside talented, motivated colleagues in a global environment, helping clients solve their most critical business challenges. At OZ, your contributions matter – you’ll have the chance to be a key player in our growth and success. If you’re driven, bold, and eager to push boundaries, we invite you to join a company where you can truly make a difference.
About Us:
OZ is a 28-year-old global technology consulting, services, and solutions leader specializing in creating business-focused solutions for our clients by leveraging disruptive digital technologies and innovation.
OZ is committed to creating a continuum between work and life by allowing people to work remotely. We offer competitive compensation and a comprehensive benefits package. You’ll enjoy our work style within an incredible culture. We’ll give you the tools you need to succeed so you can grow and develop with us and become part of a team that lives by its core values.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
Assistant Project Manager
Construction | Chicago, IL | Hybrid Flexibility
A globally recognized Architecture, Engineering, and Construction firm is seeking an Assistant Project Manager to join their downtown Chicago office. This firm delivers complex, high profile projects across the United States and internationally, with a diverse portfolio including industrial, residential, commercial, education/public, mixed use, and hospitality developments valued up to $200M+.
This role offers the opportunity to support the delivery of large scale projects while working within a fully integrated AEC delivery model alongside architecture, engineering, and construction teams.
The Opportunity
- The Assistant Project Manager will support senior project leadership in the planning and execution of construction projects from preconstruction through completion. This role will assist with coordination across project teams, consultants, subcontractors, and clients to ensure projects are delivered safely, on schedule, and within budget.
- You will gain exposure to complex projects across multiple sectors while developing your leadership and project management capabilities within a collaborative AEC environment.
Key Responsibilities
- Support the planning and execution of construction projects valued up to $200M+.
- Assist in managing projects from preconstruction through project closeout.
- Coordinate with project managers, superintendents, project engineers, and subcontractors to maintain project progress.
- Work closely with internal architectural and engineering teams within the integrated AEC environment.
- Assist with project financial tracking including budgets, cost reporting, forecasting, and change management.
- Help maintain project schedules, documentation, and reporting.
- Support communication between clients, consultants, subcontractors, and internal teams.
- Participate in project meetings and assist in tracking action items and deliverables.
- Ensure project documentation complies with safety standards, contractual requirements, and company procedures.
Qualifications
- 2 to 6 years of construction project management experience.
- Experience supporting commercial, mixed use, residential, industrial, hospitality, or institutional construction projects preferred.
- Exposure to projects valued $10M to $100M+.
- Strong organizational and coordination skills.
- Ability to support project financials, schedules, and documentation.
- Excellent communication and teamwork capabilities.
- Bachelor’s degree in Construction Management, Engineering, Architecture, or related field preferred.
Why Join
- Globally respected Architecture, Engineering, and Construction firm with an international project portfolio.
- Opportunity to work on complex projects across multiple sectors.
- Strong mentorship and career progression toward Project Manager and Senior Project Manager roles.
- Collaborative environment working alongside architecture and engineering teams in an integrated delivery model.
- Downtown Chicago office with a hybrid work schedule with 2 days work from home.
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries regarding the following opportunity, please contact our Talent Specialist, Abdul at (224) 507-1295 Title: Training Coordinator
- Hybrid Duration: 12 Months Location: Charlotte, NC, Schedule: 3 days in office, 2 days remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Reports to: Manager, Customer Education Purpose of Position: The Global Marketing Customer Education and Programs Team is responsible for delivering best in class, industry-leading Marketing Programs and Customer Education.
These programs and trainings deliver product awareness, solutions, and services through both hands-on and virtual educational offerings extending Client's Customers and Program Members product preference and brand loyalty.
The Training Coordinator, Customer Education will be responsible for supporting Customer Education initiatives such as supporting program members, training/alliance partners, and other applicable customers in the In-Building, Data Center, and Carrier Markets.
This person will take direction from the Manager, Customer Education to develop the annual education plan for USCAN.
They will project lead the development of class content, marketing materials, and class scheduling to ensure that the education plan is aligned with business strategy and is successfully executed.
The Customer Education team has a global footprint, and this role will be expected to have a cross-regional approach to ensure trainings and content within is supported uniformly within each region.
We support each other collectively to assist in team development, cross training and execution of events is vital! Additionally, is the expectation for cross-functional team support for paid classes, hands-on seminars, and field-level events.
Experience in marketing, customer service, and event management is recommended.
Fiber optic knowledge and training experience is helpful.
Major Roles and Responsibilities Growth and maintenance for customer training program that promotes and supports global marketing initiatives across markets and solutions.
Collaborate with Channel Marketing, Regional Marketing, Sales Engineers, Product Line Managers, and Engineering Services to identify Customer Education needs and future opportunities with a specific market audience.
With the direction and strategy from the Manager, Customer Education, develop and project manage Training Events both live and virtual to support the overall In-Building Network (IBN), Data Center and Carrier (CN) Sales strategy.
Collaborate with subject matter expects in Systems Engineering, Field Engineering, Application Engineers, and Regional/Applications Marketing regarding content and instructional design and develop or source training content and curriculum.
Work with Engineering Services and Field Engineering to build and maintain product samples and equipment to support class curriculum.
Collaborate with Distribution Branch Managers and Sales Engineers nationwide to coordinate logistics for live education classes.
Build promotional campaigns through marketing tools such as social media, marketing automation software and traditional inbound and outbound campaigns to support promotion of customer education events.
Maintain certifications and customer/program education records and report on results from Customer Education program.
Work with event planning software (Cvent) to set up accurate event registration/promotion, registration and after event reporting.
Establish and build relationships with external suppliers as needed.
Operate within a specified customer education budget.
Be available to provide basic customer support for program members.
Help maintain and develop program databases and processes to continually improve the training program.
As a representative of Client Optical Communications, ensure that you convey the highest level of integrity in behavior and appearance and help to fulfill all customer expectations as a premier supplier.
Skill and Knowledge Requirements: Education Requirement: BS/BA Marketing, Communications, or equivalent degree Required Experience: 2 years in marketing, communications, event planning or related experience Experience with instruction or training coordination and/or delivery preferred Desire to work with and learn software and cloud applications Required Skills: Planning and organizing Strong interpersonal skills Data gathering and analysis Problem analysis and problem solving Attention to detail Resourcefulness Basic knowledge and understanding of fiber optic networks What type of software will be used? Presentation Software (PowerPoint/Presenter) Microsoft Office SharePoint Marketing Automation Software (Marketo) Webinar Delivery Systems (AdobeConnect and WebEx Event Center) Social Media Platforms (LinkedIn) Event Planning Software (Cvent) This position does not support immigration sponsorship.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
Planning and Organizing, Problem Analysis and Problem Solving, Data Gathering and Analysis
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hari at (224) 507-1278 Title: Mechanical Drafting Technician II
- Hybrid Location: Concord, NC Duration: 12 Months Base Schedule:Monday
- Friday, 8 AM
- 5 PM OT Required: 45 hours per week target Work Environment: Employment will be through a third party on a contract basis.
Contracts will be 1 year in length and are often extended with satisfactory performance and additional project workload.
Hybrid work schedule available (work from home 3-4 days per week) Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: As a member of a global drafting department you will assist in the creation, revision, and storage of electronic drawing files (Autodesk Inventor and AutoCAD) for custom designed process equipment located in numerous worldwide Client Optical Fiber and Cable manufacturing locations.
Primary responsibilities include assisting the area drafting lead with completing all required work to an engineering/development drawing set prior to release into the system (Autodesk Vault).
Typical tasks include creating 3D models and associated drawings or editing existing models/drawings all while ensuring they follow company drafting standards: detail, sheet metal, weldment, and assembly drawings are typical.
No new design activity will be within scope of this position.
Key Responsibilities: Correct redlined models/drawings issued by drafting lead or engineering/development teams Convert legacy hand drawn and AutoCAD drawings into 3D models and associative drawings Create 2D drawings from existing 3D models from other users Collect data from engineering teams and incorporate information into appropriate drawing Collect measurements/information from production floor to incorporate into drawings Required Education: Candidates should possess one of the following, but other technical degrees with demonstrated skills in drafting will be considered: o A.A.S.
Mechanical Engineering Technology degree o A.O.S.
Drafting/CAD degree o Drafting Certificate/Certification Candidates without degrees must demonstrate proficiency in 2D and 3D drafting Required Experience and Skills: Minimum of 2 years professional experience in the mechanical drafting field Working knowledge of ASME/ANSI drafting standards General Windows-based computer skills Proficient in the use of Autodesk Inventor and Autodesk Vault software Able to adapt to company standards and guidelines Strong work ethic Strong attention to detail Interview Process: 1 Phone screen or Teams call 2 In Person Interview About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
AutoCad, Autodesk Inventor, ASME/ANSI, Autodesk Vault
Remote working/work at home options are available for this role.
Position is hybrid with requirement to travel to Sayre, PA at least once a month.
Summary:
The Engineer, Compute System Engineering is responsible for the implementation and support of compute based infrastructure, including public, private and hybrid cloud deployment models to support critical healthcare operations across The Guthrie Clinic (TGC). This role ensures high availability and performance for clinical systems, patient care services, and administrative functions across the network. The Engineer collaborates with IT teams, vendors, and hospital stakeholders to align server infrastructure with organizational goals and regulatory requirements. This position will be a technology advocate throughout the organization for the effective application of technology to meet business needs and to support business changes and growth. Technology functions include cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
Experience:
- Preferred three to five (3 to 5) years of experience in implementing and managing Windows and Open Systems server infrastructure hybrid cloud solutions in an enterprise environment; healthcare experience preferred.
- Highly experienced information systems professional with a strong technical background and proven track record of accomplishments in a large, complex multi-level organization .
- Strong technical knowledge of VMWare ESX and Microsoft Hyper-V.
- Expertise in Microsoft Windows, Linux and AIX operating systems and management.
- Familiar with hyperconverged infrastructures such as VxRail.
- Familiar with Microsoft Azure Arc, System Center, Admin Center and SCCM.
- Familiar with cloud platforms (e.g., AWS, Azure, Google Cloud).
- Experience in infrastructure-as-code (e.g., Terraform, CloudFormation) and containerization (e.g., Docker, Kubernetes).
- Experience in scripting (PowerShell, Python, Bash, etc.)
- Familiar with application delivery solutions such as Citrix.
- Experience with storage and data protection replication methodologies.
- Experience with Epic Infrastructure such as Hyperspace.
- Experience with ITSM functionalities such as change control, CMDB and ticketing systems.
- Strong knowledge of healthcare information systems (e.g., Epic, Cerner), cybersecurity and clinical operations.
- Prior experience delivering high availability systems in a 24/7 environment across geographically dispersed business units.
- Demonstrated ability to facilitate evaluation of technologies and achieve consensus on technical standards and solutions among a diverse group of information technology professionals.
- Demonstrated commitment to customer service who has provided responsive and effective support, developed solid working relationships with customers, and delivered high quality, value-added services that met/exceeded customer expectations.
- Equally adept at developing technology strategies and the operation of existing technical infrastructures. Significant experience and knowledge of computing architecture and implementation of networked computing structures.
- Polished professional with demonstrated information technology experience and strong communication skills that can rapidly gain and maintain credibility with customers and IT colleagues.
- Bachelor’s degree in Information Technology, Computer Science, Healthcare Administration or related field strongly desired or an equivalent combination of education and experience.
- Preferred certifications include Microsoft Certified: Azure Fundamentals, VCP-DCV, ECSA.
- Responsible for installation and maintenance of server infrastructure along with upgrading/configuration and the life cycle management of hardware.
- Monitors functions of server infrastructure to ensure acceptable performance.
- Creates and maintains documentation related to server configuration and environments.
- Serves as subject matter expert across server operating systems and solutions (Microsoft Windows Server, Linux, AIX, VMWare ESX, Microsoft Hyper-V)
- Troubleshoots and resolves server and virtualization incidents.
- Maintain server patching to address security vulnerabilities.
- Collaborate with cloud compute architect to design and build functional server environments.
- Provide level 2 escalation support and troubleshooting to resolve complex server incidents and tasks.
- Stay current on cloud and systems engineering trends (e.g., serverless computing, containerization, AI-driven automation) and evaluate their potential to enhance TGC operations.
- Ensure systems, applications and data are high availability, backed up and/or replicated to meet disaster and business recovery requirements.
- Implement and enforce security requirements to protect Azure-based systems and data.
- Anticipates and provides solutions for complex problems and issues, recommends upgrades and enhancements. Rapidly absorbs complex technical and conceptual information to identify issues and implications. Able to present understandable alternatives to both technical and non-technical individuals at all levels of the organization.
- Monitors industry trends, maintains knowledge of developments in cloud computing, database, storage, data protection, virtualization, hyperconverged infrastructure, server automation, monitoring and application delivery.
- Promotes the use of TGC’s PMO methodology and standards to manage IT initiatives.
- Demonstrates commitment to customer service by providing responsive and effective support, developing solid working relationships with customers and IT colleagues, and delivering high quality, value-added services that exceed customer expectations.
- Demonstrates a commitment to excellence in Customer Service with all internal and external customers of TGC.
- Performs related duties as assigned and unrelated duties as requested.
About Us
Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you’ll find staff members who have committed themselves to serving the community.
The Guthrie Clinic is an Equal Opportunity Employer.
The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.
Remote working/work at home options are available for this role.