Engineering Geology Jobs in Ewing, NJ

Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Performs PM procedures on multiple types of general and specialized clinical equipment.

Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.

Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.

Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.

Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.

Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.

Completes corrective and planned maintenance work order documentation per policy.

Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.

Continually improves processes by seeking ways to eliminate and reduce waste.

Has authority (based on department guidelines)  to order parts and supplies required for emergency service or repair  of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.

May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.

Performs other duties as assigned or requested by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

Associates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.

Three (3) to five (5) years' experience  performing corrective and planned maintenance on medical devices and/or clinical support equipment. 

Must have a basic understanding of anatomy, physiology, and medical terminology.

Working knowledge and ability to use basic hand tools and  test equipment specific to the field.  Ability to train CE associates  on use and application of select test equipment.

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.

Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and  Clinical Engineering. 

Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.

Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard.  Technician must be able to follow complex written instructions, perform tasks and document actions taken.

 Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .

Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.

Must be able to adapt to frequently changing work priorities.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Summary:

The Head of Production (Sterile Injectables) is responsible for providing strategic and operational leadership for all aspects of sterile manufacturing operations. This role ensures compliance with cGMP regulations, drives operational excellence, and leads high-performing teams to achieve manufacturing objectives in a regulated environment.

Responsibilities:

• Direct and oversee all sterile manufacturing operations, including component preparation, formulation, compounding, aseptic filling, visual inspection, and packaging.
• Develop and implement production strategies to achieve manufacturing goals, supply commitments, and performance targets.
• Ensure all manufacturing activities adhere to cGMP regulations, internal quality systems, and regulatory requirements for sterile drug products.
• Maintain a continuous state of audit readiness and support regulatory inspections, internal audits, and customer audits.
• Lead and manage investigations, deviations, CAPAs, and change control processes impacting production operations.
• Establish, monitor, and report on key performance indicators (KPIs) related to safety, quality, delivery, and productivity to drive accountability and improvement.
• Champion operational excellence initiatives to enhance manufacturing efficiency, reduce waste, and improve process reliability.
• Build, develop, and lead high-performing production teams, fostering a culture of compliance, safety, and continuous improvement.

Qualifications:

• Bachelor’s degree in Engineering, Pharmaceutical Sciences, Chemistry, Biochemistry, Chemical Engineering, or a related scientific field required; Master’s degree preferred.
• 8–15 years of progressive experience in pharmaceutical manufacturing operations within a regulated cGMP environment.
• 5–12 years of leadership experience in sterile or aseptic pharmaceutical manufacturing settings.
• Proven experience overseeing operations such as formulation, compounding, aseptic filling, visual inspection, and/or packaging of pharmaceuticals.
• Strong knowledge of FDA cGMP regulations and regulatory expectations for sterile drug product manufacturing.
• Experience supporting regulatory inspections and maintaining audit-ready operations.
• Demonstrated ability to lead investigations, manage deviations, CAPAs, and change control activities.
• Proven leadership skills with experience developing and managing production teams in regulated environments.

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply.

Shifts Available:

• 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM
• Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift
• Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc.

Job Responsibilities:

• Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair.
• Use required PPE to protect against arc flash and electrical shock.
• Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems.
• Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment.
• Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals.
• Install conduit, pull wiring, and perform proper terminations.
• Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes.
• Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels.
• Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems.
• Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement.
• Install and calibrate pressure, temperature, flow, and level control devices.
• Observe operating systems to detect hazards and determine need for adjustments or modifications.
• Design and lay out control panels, set up complex control systems, and modify engineering drawings when required.
• Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels.
• Document work performed and communicate issues, irregularities, and ongoing needs to the team.
• Maintain a safe and clean work environment following all procedures and regulations.
• Communicate effectively to resolve electrical problems.
• Assist in training line mechanics and apprentices as needed.
• Use the computerized maintenance management system (CMMS) to enter and retrieve information.
• Follow safe work practices at all times and ensure work does not endanger others.
• Perform additional duties as needed.

Additional Requirement:

• Physical examination is required.
• Must be able to train on 1st shift for 1-2 weeks if needed
• Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant

#SM

Title: Contracts Compliance Manager

Pay: $130,000 – $160,000 base + bonus potential

Location: Hamilton Township, NJ | Fully onsite with up to 25% travel (primarily to east coast HQ and field offices)

Company: Confidential manufacturing subsidiary of a publicly traded clean energy company

About the Role

A newly created, high-visibility opportunity for an experienced Contracts Compliance Manager to lead contract negotiation, administration, and compliance for both commercial and government sectors. This role supports a fast-growing manufacturing site and works cross-functionally with leadership, engineering, finance, and sales to manage contract risk, ensure FAR/DFARS compliance, and support real-time business decisions.

Responsibilities

Contract Management & Negotiation

• Draft, review, and negotiate a wide range of contracts (government, commercial, subcontracts, NDAs, POs, and MSAs).
• Oversee cradle-to-grave contract administration and ensure timely fulfillment of obligations.
• Lead contract negotiations with customers and vendors, balancing business goals with risk mitigation.
• Review RFPs/RFQs to ensure compliance and recommend appropriate risk management terms.

Compliance & Risk Oversight

• Ensure full compliance with FAR/DFARS and other government contracting requirements.
• Maintain alignment with public-company policies and standards.
• Partner with internal teams on audits, reporting, and documentation accuracy.
• Provide training and guidance to stakeholders on contract and compliance requirements.

Cross-Functional Collaboration

• Work closely with the General Manager, Engineering, Sales, and Finance teams.
• Support process improvements, revenue recognition, and operational efficiency initiatives.
• Serve as a subject matter expert on all contract compliance and policy interpretation.

Requirements

• Bachelor’s degree in Business, Legal Studies, Government Contracting, or related field (JD preferred).
• Minimum 5+ years managing both commercial and government contracts in manufacturing, defense, or industrial environments.
• Proven success in managing contracts cradle-to-grave and navigating FAR/DFARS.
• Product-based contract experience required (not software/IP).
• Strong drafting, negotiation, and analytical skills.
• Excellent communication and relationship management abilities.
• Experience with compliance initiatives or process improvement preferred.

Preferred Attributes

• Hands-on, adaptable team player with a proactive mindset.
• Strong business judgment and ability to work independently.
• Comfortable in a fast-paced, evolving environment.
• Sense of humor, accountability, and collaborative spirit highly valued.

Culture & Growth

• Tight-knit, collaborative team where everyone “rolls up their sleeves.”
• Exposure to senior leadership and opportunities to shape policies and processes.
• Onsite culture that values initiative, learning, and cross-functional visibility.
• Long-term stability with the backing of a publicly traded clean energy leader.

Position Description

Ryder is hiring a Senior Level Diesel Technician in Fairless Hills, Pennsylvania — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $32.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• PA State Inspector License Required
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Fairless Hills” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Basic diagnostics and repairs, including AC and electrical systems, required
  
  
• Three (3) years or more relevant work experience, preferred
  
  
• All other certification as required by location, required
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• All other certification as required by location, required
  
  
• ADDITIONAL REQUIREMENTS:
  
  
• Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc.
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties including:
  
  
• Performs standard vehicle maintenance
  
  
• Performs preventive maintenance
  
  
• Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable
  
  
• Completes complex and detailed mechanical inspections & repairs with minimal supervision
  
  
• Replaces defective components as instructed
  
  
• Works unsupervised on most tasks
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task.
  
  
• Utilizes key functions of Shop Management System and electronic documentation available.
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT).
  
  
• Acts as mentor for Tech 1 and Tech 2 levels.
  
  
• Demonstrate the ability to access and use internal and external maintenance documents.
  
  
• Other support duties as required to support operations. These could include but are not limited to Service Island support
  
  
• SBTIII trained within 180 days (SBT220)
  
  
• Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days)
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 4 days ago (3/16/2026 2:27 PM)

Requisition ID 2

Location (Posting Location) : State/Province PA

Location (Posting Location) : City FAIRLESS HILLS

Location (Posting Location) : Postal Code 19030

Category Technicians/Service Employees5

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-PA-Bristol

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000356

Min Pay USD $32.00/Hr.

Max Pay USD $32.00/Hr.

Job Title : Oceanography Category / Component: Officer • Both Overview Oceanography (OCEANO) Officers, also called METOC, are the Navy's geophysical experts who understand and apply all facets of meteorology, oceanography, hydrography, bathymetry, geophysics, and precise time and astrometry.

Their mission is to define and apply the physical environment, from the bottom of the ocean to the stars, to ensure the U.S.

Navy has the freedom of action to deter aggression, maintain freedom of the seas, and win wars.

Key Responsibilities Provide timely and relevant support to fleet and joint operations by leading the collection, processing, prediction, exploitation, and dissemination of environmental data.

Ensure safety of navigation, access to denied waters, freedom to maneuver at will, and increase the lethality of Navy forces.

Lead teams ranging from small 3-4 person deployable units to large commands of over 400 personnel.

Serve as the one-of-one geophysical expert at an operational command.

What to Expect Serve in a variety of challenging operational billets with increasing scope and responsibility, both at sea and ashore.

The career path interweaves sea, shore, and educational tours.

Sea duty may include leading small team detachments on U.S.

and foreign vessels, serving as the embarked OCEANO Officer on an aircraft carrier or amphibious ship, or serving on a Strike Group or Joint Task Force staff.

Shore tours include assignments at major production commands, forecast centers, headquarters, Joint commands, the Navy Data Center, and Naval Research Labs.

Work Environment Assignments are worldwide, including Europe, Hawaii, Asia, and the Middle East.

Work environments range from being at sea on surface combatants, survey vessels, aircraft carriers, and amphibious ships to being ashore at major production commands, forecast centers, headquarters, and research facilities.

Pathways, Training & Advancement Initial training includes the 3-week Information Warfare Basic Course (IWBC) and the 7-week Basic Oceanography Accession Training (BOAT).

Officers may also attend Division Officer Leadership Course (DIVOLC).

Postgraduate education at the Naval Postgraduate School is required for officers at the LCDR level and senior, typically as mid-grade Lieutenants.

Promotions to LTJG and LT occur at 2 and 4 years of service, with competitive promotion opportunities to LCDR, CDR, CAPT, and Flag Officer ranks.

Requires a Baccalaureate degree, preferably in a technical field, with a cumulative GPA of 2.8 or greater.

Must have completed a full college calculus series (I and II) with a minimum 'C' average, and a college-level calculus-based physics series (I and II) with a minimum 'B' average.

A desired degree is in physics, physics-based oceanography, meteorology, hydrography, earth science, engineering, or mathematics.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy as an Officer, including United States citizenship A bachelor's or qualifying professional degree Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores on the Officer Aptitude Rating exam Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Must be qualified for sea duty, world-wide assignable, and eligible for a Top-Secret security clearance.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Waste Water Superintendent

Doylestown, PA

Highly Competitive Salary + Bonus + 401k Match & Full Benefits

Heavy Civil Construction

Why This Role Matters: Take the helm on landmark heavy civil projects, where your leadership will directly shape our region's infrastructure. This is a rare opportunity to build a legacy with a company that invests in its people, offering a clear path to ownership and empowering you with the autonomy to lead crews and deliver excellence safely and efficiently.

Key Responsibilities:

• Lead, motivate, and direct multiple field crews and subcontractors, ensuring the highest standards of safety and productivity.
• Oversee all site operations, from planning and resource allocation to proactive problem-solving for unforeseen site challenges.
• Manage project budget, schedule, and manpower needs for your assigned project.
• Implement and enforce rigorous QA/QC processes to guarantee the highest quality of work.
• Monitor subcontractor progress and maintain meticulous documentation, submittals, and weekly safety reporting.
• Serve as the primary leader on the ground, ensuring all work meets specifications and safety regulations (OSHA).

Ideal Candidate Profile:

• Must-Have: 5+ years of experience as a Superintendent in the heavy civil industry.
• Strong personal initiative, excellent planning, and proven problem-solving capabilities.
• Keen awareness of OSHA standards, industry best practices, and QA/QC procedures.
• Effective interpersonal skills with the ability to lead teams and manage subcontractors.
• Required: OSHA 10-Hour or 30-Hour Certification and a valid driver's license.
• Must be located within a commutable radius of the project area.

The Company & Role:

• Path to Ownership: Unlock the potential to become a shareholder and own a piece of the company.
• Compensation & Growth: Highly competitive salary, a strong bonus program, and raises reviewed twice a year.
• Comprehensive Benefits: Full medical, dental, 401k with match, 7 paid holidays, and company-paid life insurance.
• Tools for Success: Company-provided vehicle and signing/moving bonus opportunity for the right candidate.
• Stability & Culture: Join a stable, growing contractor that truly values long-term career growth and personal development.

Drive the future of heavy civil construction. Submit your resume to or apply online.

Job Type: Full-time

Available Positions: 1

Location: On-Site

Application Deadline: March 30th, 2026

Opening Type: Existing Vacancy

Summary

The Packaging Engineer will support our production teams by developing precise drawings, layouts, and 3D models for custom products and packaging. This role plays a key part in turning concepts, measurements, and customer requests into designs, prototypes, and real solutions used on the production floor.

Key Activities

• Create and update 2D/3D CAD drawings, layouts, and technical specifications.
• Translate ideas, measurements, and customer requirements into accurate, sustainable designs.
• Assist with prototypes, project cost estimates, and test builds for new products.
• Work with production teams to ensure designs are feasible, efficient, and optimized for manufacturing.
• Maintain drawing files, revision histories, and documentation.
• Support R&D, cost-saving initiatives, and continuous improvement projects.
• Participate in design reviews and collaborate with sales, operations, and quality as needed.

Preferred Skills

• Strong aptitude for numbers and precise measurements.
• Prior packaging or manufacturing experience is preferred.

Educations & Experience

• 1-3 years of experience in packaging or structural design within a manufacturing, corrugated, consumer goods, or packaging industry.
• Experience designing corrugated packaging, folding cartons, displays, or protective packaging.

Are you looking for your next opportunity? We can help.

Finding a great opportunity that fosters growth, a great culture, and leadership opportunities can be difficult. Top Quality Recruitment (TQR) connects professionals with leadership opportunities across the Packaging, Food and Beverage, Medical Devices, and Biotechnology industries. With 50+ years of experience, we believe in one-to-one communication and finding the best candidate/employer match possible.

TQR is an equal-opportunity employer that encourages diversity. We will consider all applications.

Accommodation for applicants with disabilities is available upon request.

Are you looking to hire? Get started here: hiring advice: all available opportunities: thank all applicants for their interest and appreciate the time and effort involved; however, due to the large volume of resumes received only those candidates selected for an interview will be contacted. Please attached your resume to your application.

Job ID: 8198

Director of Quality Control - Sterile Injectables

Fairless Hills, PA

$150,000 - $180,000

Bonus Eligible (company performance based), 1st Shift, QC Ownership & many more company benefits

Are you a sterile injectables QC leader ready to own the entire quality control function?

Looking for a role where your scientific decisions directly impact product release and production readiness?

This is a Director-level QC position within a sterile injectables manufacturing site transitioning into active production. You will take full responsibility for the Quality Control function, overseeing microbiology, analytical testing, environmental monitoring, and laboratory compliance.

In this role, you will ensure all sterile injectable testing programs are robust, defensible, and inspection-ready. Your leadership will directly influence batch release, data integrity, and regulatory confidence.

Strong sterile injectables experience is essential. You must understand aseptic manufacturing, sterile testing requirements, and the regulatory expectations tied to injectable products.

If you’ve led QC teams within sterile injectable environments and are ready to oversee the entire QC department, this is a serious opportunity!

The Role:

• Lead and oversee the full QC laboratory function supporting sterile injectable manufacturing
• Ensure inspection readiness and regulatory compliance
• Provide scientific leadership tied directly to batch release and product quality

The Person:

• Significant QC leadership experience within sterile injectables
• Strong scientific background in aseptic and sterile testing environments
• Experience managing laboratory teams in a regulated pharmaceutical setting

Reference Number: #BBBH270159

Mission:

We are seeking a Senior Engineering Admin to join our growing team. This individual will provide administrative support to the Engineering Department. Position responsibilities include overseeing the daily operations of the department, supporting interdepartmental processes and interactions, coordination and scheduling of meetings, prioritizing incoming communication, engineering team calendar management, and employee onboarding. The successful candidate will have excellent oral and written communication skills and have a systematic approach to organizing their workload.

Responsibilities:

• Serve as the key point of contact to internal employees as well as external partners, customers and vendors who interact with the Engineering team
• Manage and track engineering non-inventory purchasing
• Review and manage expenses for engineering
• Manage, track, and document engineering hours for internal and 3rd party engineering resources
• Manage and maintain engineering documentation
• Develop and maintain engineering standard operating procedures
• Engineering support for and compliance of quality management system processes
• Manage and track Beta inventory
• Manage engineering support for the RMA/FMA, QC, and SC processes
• Provide authorizations to support production
• Define and own engineering safety processes, including MSDS safety data sheets and PPE requirements
• Manage organization of engineering area and drive 5S best practices
• Calendar management for team, scheduling for internal and external meetings, and preparation of agendas, minutes, and required materials
• Manage the employee training site to ensure all personal are current on educational requirements
• Support on-boarding of new engineering resources
• Provide coordination and support to NPD and Sustaining projects and activities
• Support Project Manager with various tasks, as needed
• Other duties as requested.

Qualifications:

Experience and Education:

• Bachelor’s Degree required.
• 3-5 years of experience in an administrative support role. Ideal background is supporting an Engineering department.
• Excellent written and verbal communication skills.
• Strong knowledge of computer and technology skills, including proficiency with the Microsoft suite.
• Must demonstrate the ability to be agile and pivot as needed in a fast-paced environment.
• Must be a self-starter who demonstrates the ability to work independently.
• Must demonstrate strong organizational skills and attention to detail.
• Listening, creative thinker, decision making acumen, problem solver, takes responsibility, demonstrates personal integrity & honesty.
• Able to prepare basic reports and use the appropriate mode of communication