Emis Cap Jobs in Usa
914 positions found — Page 11
Summary:
Emergency Care Center Technician Senior works with the RNs in the Emergency Room to provide care to patients. They have special skills beyond those of a basic Emergency Technician;
for example, they can perform venipuncture, dress wounds, remove staples and sutures, and measure peak expiratory flow rate.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Gives basic care to patients in a compassionate manner.
Takes and records the following vital signs and reports any change or abnormal findings to the RN: Temperature, pulse, respiration rate, and blood pressure.
Gives the following treatments, maintaining respect for patient’s privacy: weigh patient, test urine (acetone, sugar, blood), apply warm/cold compresses, apply ice caps, and care for the body after death.
Collect specimens according to RN’s instructions and to the procedure. Urine and stool specimens are labeled and taken to the lab. Also performs Accuchecks/blood sugar.
Assists patients to and from the bathroom.
Positions patients according to RN’s instructions (fowler, semi-fowler, etc.) and changes position as frequently as ordered and using good body mechanics.
Assists with stringing IVs under the direction of the Emergency Department nurse.
Assumes certain nursing functions and responsibilities under the guidance of a Licensed nurse.
Is responsible for the following in the admission of the patient: bringing the patient to the room from admitting or ER as needing; assisting the patient to bed and applying armband; obtaining and reportingto RN vital signs, height, weight, and history of allergies; assuring patient is comfortable and orientated to surroundings; and assisting RN with an initial interview.
Is responsible for instructing and explaining the following in patient/family orientation: call signal, smoking policy, and side rail policy. Is responsible for the following inpatient discharge: helps patient collect personal belongings; takes patient per wheelchair to lobby or car; and removes all equipment from the room, cleans, and returns to SPD or a storage area.
responsible for the following in transferring patients.
Collects patient's personal belongings, assembles equipment to go with the patient, accompanies the patient to a new room, and stays with the patient until floor nurse enters the room.
Is respectful to patient’s right to privacy and confidentiality: knocks before entering the room, does not expose patient unnecessarily in giving care, closes the door when giving a treatment, and keeps patient information confidential.
Answers call lights promptly and with a pleasant, helpful attitude.
Observe the RN performing the following procedure and nursing functions. Then after a satisfactory return demonstration to the RN, the EDT may perform procedure and nursing functions independently, under the direction of the RN.
Check restraints frequently to make sure the patient has not removed them or that they are neither too loose nor too tight. Obtains permission of RN before removing them for any reason.
Notifies RN of any “beeping” infusion pumps. Checks fluid level in the bag and notifies RN when it is low.
Notifies RN immediately if any swelling, redness, or if the patient complains of anything. Assembles IV equipment.
without receiving instruction from the ER Nurse.
Inserts Foley catheter using good technique and displaying proper knowledge about catheterizing patients.
Assures that there is no pull on the catheter while giving care. Assures that there are no kinks in the catheter or loops that fall down below the level of urine in the drainage bag. Assists the RN in giving Foley catheter care. Collect specimens as instructed by RN.
Is conscious of maintaining a sterile atmosphere by knowledge of sterile technique.
Demonstrates proper cleansing and preparation of wounds. Can properly assist physicians with suture repairs.
Can properly suction secretion/fluid from mouth, throat, and nose.
Is knowledgeable in shock management by knowing properly apply pressure to a bleeding wound. Can properly apply pneumatic anti-shock trousers.
Can properly apply cardiac monitor (EKG) leads.
Can properly handle fractures and apply splints and slings as physician orders. Can fit the patient's crutches properly. Knows and utilizes proper body mechanics.
Understand the importance of the “No Smoking” sign on the door. Replace the mask or cannula if they become displaced. If the tent is in use, ensure that the ends of the tent are tucked in at all times. Promptly reports to RN if the patient complains or looks like having difficulty breathing.
Assists physician with application of casts and splints. Assumes position of the limb is maintained as instructed by RN. Notices swelling, coldness, redness, or discoloration of toes or fingers and reports to RN. Reports any bleeding through the cast or complaints of pain to the RN.
Ensures side rails remain up and the patient remains in a bed after the pro-op medication is given.
Applies anti-embolic hose appropriately and in the correct size.
Assist in moving the patient to the stretcher.
Safely performs surgical shaves and preparation of skin.
Takes vital signs as requested by RN for post-op care. Assists with turning, coughing, and deep breathing as instructed by RN.
Can properly perform EKGs.
Performs phlebotomy skills.
Contributes toward maintaining a clean, safe environment for the patient and assumes certain responsibilities for the care and use of equipment.
Ensures beds are in low position except when raised to give care and are locked at all times.
Adheres to procedures for transferring patients to chairs, wheelchairs, and stretchers and in transporting patients in wheelchairs and stretchers.
Ensures that the stretcher is locked.
Ensures that there is a clear pathway from patient door to bedside at all times.
Assists in maintaining a clean environment by practicing good hand washing.
Adheres to isolation procedures.
Reports condition of un-cleanliness on the unit to Shift Coordinator.
Knows the use and operation of equipment he/she is required to use.
Knows the care and location of all other equipment used on the unit.
Uses supplies economically and only for the use intended.
Knows how to stock and maintain equipment in the department.
Job Requirements:
Education/Skills
~ Certification required.
Experience
~ Two (2) years of patient care experience in an acute care hospital or EMT field/Emergency Care Setting required.
Licenses, Registrations, or Certifications
EMT license required.
BLS required.
Work Schedule:
7PM - 7AM
Work Type:
Full Time
Ensures that the company philosophy and core values are evident in the service delivered to customers.
Takes responsibility for seeking and achieving professional growth and continued education.
Assures quality of work performed by all associates. Coordinates services to customers in a manner that provides customer satisfaction and cost-efficient operations.
Assures compliance with CAP, JCAHO, OSHA, infection control, safety, and other regulatory standards, including privacy and security of health information (PHI).
Maintains collection tray/container/bag and working area in a neat and sanitary condition & restocks as necessary.
Responsible for procurement of supplies for the department in cooperation with the team lead.
Performs all duties of a phlebotomist; specimen collection, specimen receiving, specimen send-outs.
Prepares specimens for referral to outside labs, including ordering of misc. and misc. referred testing, packaging of specimens, calling of cab, referral paperwork, and the mail system
Performs all patient specimen collections including, but not limited to, venipuncture, capillary collection, urine drug screen collection, skin tests, and blood, throat, and NP cultures.
Ensures that specimen requirements are met at the time of collection and maintain specimen integrity
Demonstrates good communication skills by competently interacting with customers, patients, family members, nurses, physicians, clients, and co-workers.
Operates the laboratory computer system to document specimen information, patient registration, order entry, collection lists, and other assigned tasks.
Performs other related duties as assigned (stand-by/on-call, inventory, special projects, cross-training, etc.).
Completes associate performance evaluations and annual competency assessments in a timely manner.Job Requirements:Education/Skills High School diploma or equivalent preferredBilingual English/Spanish preferredCompletion of a Phlebotomy; Medical Laboratory; or Medical Assistant program that includes phlebotomy preferredFamiliar with medical terminology; computer data entry; organizational skills Experience One year phlebotomy experience preferred Licenses, Registrations, or Certifications Certified Phlebotomy Technician (CPT) is preferredPhlebotomy Tech (PBT) certification or State licensure is preferred if in Louisiana In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule:5 Days - 8 HoursWork Type:Full Time
Establishes goals, and schedules and coordinates laboratory administration, including purchasing and maintenance of laboratory equipment and supplies.
Ensures that all activities are in compliance with organization goals and applicable regulations.
MAJOR JOB RESPONSIBILITIES· Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.· Responsible for all departmental and staff customer service initiatives· This position will be key in improving and maintaining associate morale and retention rates;decreasing turnover.· Personnel
- Responsible for the management (oversight) of all departmental associates· Performs decision-making processes regarding the hiring, disciplinary action, terminating of departmental associates.· Will be responsible for overseeing associate evaluations;assuring that time and attendance is completed accurately;assisting with associate staffing/scheduling and PTO requests;will help oversee education, to ensure that all associate education is in compliance with best practice standards;will conduct timely associate communication to ensure associates are well educated.· Capital and Operating Expense
- Will work in collaboration with Administration and Finance to prepare annual capital and operational budgets.· Will be responsible for maintaining expenses and revenue within the established fiscal year budget for all departments under directorship.· Reviews rates and procedure codes, supervises the processing, billing and review of laboratory testing.· Performance Improvement and Quality Management
- Responsible for monitoring and/or overseeing that all QC programs;including proficiency testing, review and correction of deficiencies;responsible for continuous performance improvement;maintains total qualityof service at acceptable levels.· Responsible for management and operations within the Laboratory Service Line in collaboration with the Laboratory Medical Director and System Director of Laboratory Services.· Assure compliance with appropriate accrediting agencies such as that CAP, AABB, CLIA, JCAHO, OSHA, etc.· Maintains accurate statistics either manually or in the LIS to show productivity, performance indicators, quality management, etc.· Ensures that all equipment within the Laboratory is functioning properly and ensures that all personnel is educated on proper techniques of operation;verifies that all majorequipment repairs have been accomplished;in collaboration with Administration, initiates equipment service contracts.· Directly responsible for operational policy and procedure development for all related departments under directorship.· Provides technical expertise regarding problem solving for all related departments under directorship.· Performs waived, moderate, and high complexity testing, when needed for all related departments under directorship.· Serve as a laboratory representative on designated hospital committees as required i.E.: Infection Control, Blood Utilization Committee, Quality Management, Safety Committee, etc.
JOB STANDARD QUALIFICATIONS A.
Education/Skills· Bachelor's Degree or higher in clinical laboratory science or medical laboratory technology from an accredited institution or equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493.1489 required.B.
Experience· Minimum of 3-5 years Clinical Laboratory Experience in moderate/high complexity testing for the specific section/area of responsibility preferred.· Minimum 2 year of Supervisory experience required.
C.
Licenses, Registrations, or Certifications· Must possess Certification for MLS, MLT, MT from ASCP, AMT, AAB, or HEW/HHS.· If certification with an expiration date is held, the certification must be maintained and kept current.Work Schedule:5 Days
- 8 HoursWork Type:Full Time
The Laboratory Supervisor serves in an administrative role with direct reports, and functions in an exempt pay status.
In conjunction with the Laboratory Director and/or Laboratory Manager, this Job develops and implements new procedures, instrumentation, quality control, and reagent use.
This Job is also responsible for the development and maintenance of policies and procedures that meet the standards of regulatory agencies and implement service quality improvements.
The Laboratory Supervisor ensures all personnel are held accountable through ongoing personnel performance reviews and assists in the orientation and development of personnel competencies for their section(s).
Responsibilities:Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Is responsible for providing day-to-day supervision of high, moderate, and waived complexity test performance by laboratory testing personnel.
Must be accessible to address technical problems via on-site, telephone, or electronic consultation with testing personnel at any time that testing is performed in accordance with policies and procedures established by the laboratory Medical Director.
Ensures compliance with all policies, procedures, and standards as promulgated by state and federal agencies, the hospital, and other regulatory entities such as CLIA, TJC, CAP, AABB, etc.
Plans, organizes and coordinates the work activities of assigned section(s) and shift(s).
Keeps accurate attendance records on all associates; maintains time and attendance records for the department.
Assists the Director/Manager in maintaining the Laboratory budget to include monthly analysis and variance reporting on expense detail.
Assists the Director/Manager in associate performance conversations that drive merit increases.
Develops, implements, and maintains current procedural manuals of all tests performed in the section(s) assigned and updates and reviews manuals biennially or more often as necessary.
Enforces all safety policies and procedures.
Researches, evaluates and implements new and improved procedures, methodologies, instrumentation, and techniques as assigned by the Director/Manager, or Supervisor.
Implements an appropriate section and/or shift-specific Quality Control Program and maintains all applicable Quality Control and Functional Verification records.
Is responsible for monitoring test analyses and specimen examinations to ensure that acceptable levels of analytic performance are maintained.
Reviews the work done by technologists/technicians working in the section(s) or shift(s) assigned to ensure a minimum of errors and corrective action in the interest of good patient care.
Refers clinical problems to the laboratory director, manager, or supervisor as appropriate.
Assures that all remedial actions are taken whenever test systems deviate from the laboratory's established performance specifications.
Ensures that patient test results are not reported until all corrective actions have been taken and the test system is properly functioning.
Operates, maintains, and troubleshoots all equipment in assigned section(s) to keep in good working order; makes minor repairs andadjustments when necessary; initiates and follows through with Biomedical Engineering/equipment manufacturer for safety checks and repairs; schedules preventive maintenance within the section with Biomedical Engineering, equipment manufacturer, or an outside contractor.
Prepares and submits routine or special administrative and technical reports by due dates as required, requested, or delegated.
Orders and maintains inventories for all necessary supplies and reagents in assigned section(s) to always have an adequate amount on hand.
Trains new technologists and technicians in the assigned section(s) procedures and policies and provides subsequent training in all new or revised procedures and techniques for assigned shift(s) or provides remedial training as necessary.
Responsible for maintaining orientation records on new associates.
Assists the Director/Manager in designing, implementing, collecting, and analyzing data, and reporting all phases of a comprehensive performance improvement program that involves laboratory personnel in Performance Improvement activities.
Prepares and conducts in-service education either formally or informally for assigned section(s) and shift(s).
Provides input on personnel for hire, fire, transfer, interview, disciplinary probation, etc; counsels and documents technical deficiencies.
Performs skills review and competency assessments and maintains appropriate documentation on all technical personnel as delegated by the Laboratory Manager/Director.
Oversees and enforces expectations of personnel in assigned section(s).
Participates in proficiency testing surveys; reviews and evaluates results and maintains copies of survey records in section(s).
Coordinates and attends meetings as required to discuss changes and developments regarding policies, equipment, procedures, staffing, etc.
Utilizes and has a thorough working knowledge of the Laboratory Information System and applications thereof.
Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department.
Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age-specific, and other developmental needs of each patient served.
Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required).
Performs all routine and complicated laboratory procedures in the primary section which assigns age (Pedi) or sex-specific values.
Provides notification and documentation of critical laboratory values obtained.
Calculates, enters, and/or verifies results of laboratory procedures.
Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary for the performance of assigned job duties.
Keeps abreast of Medical Technology, by reading Journals, texts, and technical bulletins; attends workshops and seminars; becomes active in localprofessional associations.
Demonstrates adherence to the CORE values of CHRISTUS Health.
Performs other duties as assigned.
Job Requirements:Education/Skills Bachelor's degree or equivalent education in chemical, physical, biological, clinical laboratory science, or medical technology from a regionally accredited college/university or equivalent years of experience required.
Experience 5 years of experience as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or Medical Laboratory Technician required.
5 years of full-time primary experience in the specific section of responsibility required.
Licenses, Registrations, or Certifications Active certification or certification eligibility for MT (ASCP), CLS (ASCP), MLS (ASCP), MT (AMT), CLS (NCA/ASCP), or MT (AAB) required.Work Schedule:5 Days
- 8 Hours Work Type:Full Time
Emergency (Code Blue and White) response;
E.: setup and operation);
Oral hygiene;
Oxygen deliverydevices and therapeutic monitoring;
Chest film analysis;
Bloodgas collection and analysis;
EKG analysis;
Cleaning and stocking of equipment and supplies as necessary;
Participate in CAP and JC surveys.
RRTs may function as Shift Leader or serve in the capacity of Team Leader.
Therapeutic gas management and monitoring, including INO and HeO2;
Pulmonary Function Testing;
Hemodynamic Monitoring;
Waveform analysis;
Licenses, Registrations, or Certifications
CRT thru the National Board of Respiratory Care (NBRC) required
Full Time
We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at (844) 257-6925.
Emergency (Code Blue and White) response;
E.: setup and operation);
Oral hygiene;
Oxygen deliverydevices and therapeutic monitoring;
Chest film analysis;
Bloodgas collection and analysis;
EKG analysis;
Cleaning and stocking of equipment and supplies as necessary;
Participate in CAP and JC surveys.
RRTs may function as Shift Leader or serve in the capacity of Team Leader.
Therapeutic gas management and monitoring, including INO and HeO2;
Pulmonary Function Testing;
Hemodynamic Monitoring;
Waveform analysis;
Licenses, Registrations, or Certifications
CRT thru the National Board of Respiratory Care (NBRC) required
Full Time
We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact us at (844) 257-6925.
Summary:
Responsible for the pulmonary care of critical, non-critical, and chronically ill adult, pediatric, and neonatal patients under the direction of a physician with minimal supervision. Performs patient assessments and institutes respiratory care plans. Performs various technical and diagnostic respiratory therapy procedures in all areas of the hospital.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Include, but are not limited to:
Emergency (Code Blue and White) response;
Airway management including nasotracheal & endotracheal suctioning;
Delivery of aerosolized drugs;
Ventilator management (i.E. setup and operation);
Oral hygiene;
Airway retaining device placement and maintenance;
Airway support device management including BiPAP and CPAP devices;
Oxygen deliverydevices and therapeutic monitoring;
Chest film analysis;
Bloodgas collection and analysis;
EKG analysis;
Accurate and complete documentation;
Cleaning and stocking of equipment and supplies as necessary;
Participate in CAP and JC surveys.
RRTs may function as Shift Leader or serve in the capacity of Team Leader
Advanced practice skills may include:
Therapeutic gas management and monitoring, including INO and HeO2;
Pulmonary Function Testing;
Bronchoscopy assist;
Hemodynamic Monitoring;
Waveform analysis;
Nocturnal SpO2 evaluation (Desaturation Studies);
Polysomnography;
Transport duties.
Job Requirements:
Education/Skills
~ See licensure and/or certification requirements
Experience
~ 1 - 3 years of experience preferred
Licenses, Registrations, or Certifications
RT or RCP License in state of employment required
BLS required
Registered Respiratory Therapist (RRT) by NBRC required
In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule:
7PM - 7AM
Work Type:
Full Time
Summary:
Responsible for the pulmonary care of critical, non-critical, and chronically ill adult, pediatric, and neonatal patients under the direction of a physician with minimal supervision. Performs patient assessments and institutes respiratory care plans. Performs various technical and diagnostic respiratory therapy procedures in all areas of the hospital.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Include, but are not limited to:
Emergency (Code Blue and White) response;
Airway management including nasotracheal & endotracheal suctioning;
Delivery of aerosolized drugs;
Ventilator management (i.E. setup and operation);
Oral hygiene;
Airway retaining device placement and maintenance;
Airway support device management including BiPAP and CPAP devices;
Oxygen deliverydevices and therapeutic monitoring;
Chest film analysis;
Bloodgas collection and analysis;
EKG analysis;
Accurate and complete documentation;
Cleaning and stocking of equipment and supplies as necessary;
Participate in CAP and JC surveys.
RRTs may function as Shift Leader or serve in the capacity of Team Leader
Advanced practice skills may include:
Therapeutic gas management and monitoring, including INO and HeO2;
Pulmonary Function Testing;
Bronchoscopy assist;
Hemodynamic Monitoring;
Waveform analysis;
Nocturnal SpO2 evaluation (Desaturation Studies);
Polysomnography;
Transport duties.
Job Requirements:
Education/Skills
~ See licensure and/or certification requirements
Experience
~ 1 - 3 years of experience preferred
Licenses, Registrations, or Certifications
RT or RCP License in state of employment required
BLS required
Registered Respiratory Therapist (RRT) by NBRC required
In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame.
Work Schedule:
7PM - 7AM
Work Type:
Full Time
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience):
1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1+ years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
This position offers relocation based on candidate eligibility.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift:
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr. 10, 2026
Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Helper Manufacturing to join our Fabrication team in Algona and Auburn, Washington.
Join our innovative manufacturing team as a Helper, where your contributions will play a vital role in the production process. In this dynamic position, you will utilize a variety of hand and power tools to perform essential tasks such as sorting, cleaning, and preparing parts for assembly and finishing. Your attention to detail will ensure that identification markings are accurately applied, while your organizational skills will help maintain a clean and efficient workspace. You will collaborate closely with skilled employees, assisting in mechanical and paint duties, and ensuring safety protocols are followed in high-stakes environments. Your ability to operate specialized equipment, such as the video jet marking machine and anodizing processes, will be crucial in supporting our production goals. If you are passionate about contributing to a team that values quality and precision in manufacturing, we invite you to be a part of our mission to deliver excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform various duties using hand or power tools, including staking, filing, trimming, sawing, buffing, drilling, sanding, and filling to facilitate assigned tasks.
Sort, count, wrap, unwrap, and clean parts, tools, assemblies, or equipment as required.
Maintain cleanliness and organization of work areas by sweeping, cleaning, and picking up materials and parts.
Move, pack, and unpack boxes, materials, parts, tools, and equipment, ensuring proper handling and storage.
Apply identification numbers or letters (part marks) to parts, materials, or assemblies using various marking methods (e.g., steel, rubber, electro-etch).
Rack and unrack tubes and materials, applying dust caps and seals, and verifying configuration discrepancies against samples.
Assist higher classification employees with mechanical and paint duties, including filling pots, moving lifts, and setting up/removing painting equipment.
Maintain surveillance in paint and assembly areas, ensuring safety procedures are followed and assisting incapacitated employees as needed.
Perform masking processes, including applying masking tape and protective materials to parts in preparation for painting or plating operations.
Finish contoured and flat surfaces to required specifications using abrasive materials prior to and after painting, including hand touch-ups.
Clean and service paint spray application equipment, including tanks, brushes, and hoses, after use.
Review Work Orders (WOs) and drawings to determine work requirements and obtain necessary tools and specifications using online computing equipment.
Operate and maintain the video jet marking machine, ensuring proper fluid levels and cleanliness of heads.
Assist in the anodizing process by loading and unloading detail parts on/off the load bar and performing low-pressure tests on tubing.
Count, load, and protective wrap finished production parts for shipment to the next operation, and log completed jobs into the Decac MRM system.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)
1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift
Must have basic computer experience and competency skills
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This role is primarily second shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $21.32/hour, with potential to earn up to $48.70/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 25, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
