Elixir Genserver Terminate Jobs in Usa

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

Are you looking for an exciting and fulfilling career with one of the Best Employers in Ohio? If you’d like to join a team of dedicated associates in a collaborative work environment where there’s always something exciting happening – think ice cream trucks, summer cookouts, onsite yoga, holiday parties, paid time off to go to company picnics and so much more – you found the right place with CASTO.

CASTO has been recognized as a best place to work ten times, a healthy employer eight times, and even named a healthiest employer in America. We have an exceptional team, outstanding benefits including paid volunteer time and a robust incentive-based wellness program, an innovative environment, and a supportive company culture, so you can understand why the average tenure of our associates is more than 10 years!

BASIC FUNCTION:

CASTO's Payroll Coordinator ensures accurate and timely payroll processing, maintains organized records, and supports essential HR functions. This role is an integral part of the human resources team.

MAJOR DUTIES AND RESPONSIBILITIES:

Payroll:

• Manage the timekeeping system and assist supervisors with processing time
• Enter all changes in payroll system, ensuring integrity of the data
• Transmit bi-weekly payrolls
• Import files and run scheduled and ad hoc payroll reports
• Cut manual checks as needed outside the normal payroll cycle
• Maintain accurate records in the company's electronic filing system

Personnel Changes:

• Track the receipt of associate documents and manage new hire checklists
• Process terminations, including drafting termination letters and processing termination checklists

FMLA and Medical Leave:

• Process and track all medical leave and ensure the appropriate documents are sent and received
• Work with our third-party FMLA administrator to manage FMLA claims

Other duties and responsibilities:

• Coordinate annual compensation review by preparing market data and salary sheets
• Protect the integrity of HR's electronic filing system by ensuring documents are current and entered without error
• Prepare information to submit in response to unemployment claims
• Respond to employment verification requests

SKILLS

• Bachelor’s degree
• 2-4 years of experience in payroll or related HR field
• ADP WorkforceNow experience preferred
• Excellent organizational skills and attention to detail
• Ability to communicate with all levels within the organization
• Ability to work with/keep confidential information
• Working knowledge of employment laws and regulations preferred

WE OFFER:

• Base pay starting at $22.00 - $29.00 per hour
• Medical
• Dental
• Vision
• Life
• 401(k)
• Generous paid time off
• Annual Reviews
• Award Winning Culture

CASTO offers a supportive and inclusive environment for all associates and their families. We are a Drug Free Workplace and successful completion of a background check is required for this position.

Job Overview 

Mondo Media Solutions (MMS) is seeking a highly skilled Audio Video Field Installation Engineer to join our team. We specialize in full-service installations of audio, video, Theatrical lighting, access control, and surveillance systems for commercial applications. Located in Philadelphia, PA, this role offers both full-time and contract opportunities. 

Responsibilities 

• Lead installations, maintenance, and troubleshooting of commercial audio/video systems, including conference rooms, access control, and security camera systems. 
• Install projection systems, wiring, termination A/V systems, loudspeakers, cameras, and displays. 
• Troubleshooting basic network routers and switches. 
• Engage in DSP programming, particularly with Q-SYS, 
• Install and Troubleshoot conference room setups and equipment. 
• Fabricate racks, pull and dress cables, and manage cable terminations. 
• Provide friendly customer service during installation and servicing tasks. 
• Updating onsite installation software throughout the day. 

Requirements 

• Minimum 5 years of experience as a commercial A/V installer. 
• Must be able to independently diagnose and repair onsite issues with networking, security cameras, distributed audio systems, and conference room systems.  
• Proficient in DSP programming, preferably with QSYS, Extron 
• Experienced in control systems, QSC QSYS systems, including coding and troubleshooting. 
• Familiar with using power tools like drills, saws, and rotary hammers.
• Obtain or pass OSHA 10 certification within 30 days and Obtain or pass OSHA 30 certification within 90 days  
• CTS certification within 90 days 
• Strong organizational skills, attention to detail, and the ability to manage multiple projects. 
• Excellent communication skills, both verbal and written. 
• Ability to safely lift up to 50 pounds work comfortably on ladders up to 12 feet, and lifts over 26 feet. 
• Proficiency in soldering and cable terminations, including XLR, TRS, RCA, and more. 
• Familiarity with Microsoft Office and various web-based portals. 
• Ability to fit into tight spaces and quickly learn new computer programs. 

Compensation & Benefits 

• Medical and Dental Benefits
• 401K 
• Company Vehicle Use 

Additional Information 

• Candidates must be detailed, organized, and have a proven track record of reliability. 
• Committed to the company's Mission, Vision, and Values. 
• Ability to identify and handle various cable types and connectors. 
• Experience with basic and advanced hand tools is essential. 

About Mondo Media Solutions 

Mondo Media Solutions specializes in custom audiovisual, IT, and security systems for businesses, schools, and government. From boardrooms and auditoriums to digital signage, we deliver reliable, scalable technology solutions with a commitment to integrity and customer satisfaction. 

Job Description

NEW OPPORTUNITY for an Electrical Assembly Intern at Gratz Operations!

Assist and support the current Assembly team with electrical assembly projects, while learning and gaining experience in electrical machine design, machine testing, and/or machine controls. This position is one that understands how to read electrical schematics and can assist in properly building panels, routing, and terminating wires for complete machines. The ability to operate manual and powered hand tools, such as drills, grinders, and sanders is desired. This position is under the supervision of the Assembly Team and Electrical Engineers. 

DUTIES AND RESPONSIBILITIES:

· Responsible for assisting higher-level Assemblers and Engineers in electrical panel builds.

· Read and understand assembly drawings, electrical schematics, and assembly instructions.

· Follow standard assembly procedures and adhere to pre-determined best assembly practices.

· Hand drill, ream, and tap holes for wire hold downs as needed.

· Layout and build electrical panels working off drawings and schematics.

· Properly label all wires according to electrical prints and schematics, and verbal instructions.

· Route and terminate wires according to electrical prints and schematics and verbal instructions.

· Work with engineers in the testing of electrical panels and machines.

· Work with a cooperative team when necessary.

· Ability to follow instructions without constant supervision.

· Maintain a safe and clean workstation while having a safety-conscious mindset.

· Working with Engineers and the manufacturing team improves the manufacturability of machinery.

· Prioritize workload to ensure that deliverables are completed in timelines that meet customer expectations

· Performs other Duties as assigned.

QUALIFICATIONS, SKILLS, AND ABILITIES:

· Minimum 1 year of experience in Hands-on electrical machine assembly, panel building, electrical maintenance role, or other electric work. An equivalent combination of experience and education to successfully perform the essential functions of the position will also be considered.

· Able to read and understand engineering assembly drawings, instructions, schematics, and prints.

· Basic electrical machine systems understanding required.

· Basic Understanding of stop/safety controls and safety interlocks required.

· Ability to interface with individuals with diverse backgrounds at varying levels of the organization.

· Fluent in Microsoft Office products (Excel, Word, PowerPoint, etc.) desired.

· Strong passion, high energy, and enthusiasm for growth.

· Strong communication skills and detail-oriented.

· Strong time management, organizational skills, and ability to set priorities for multiple tasks.

· Ability to work in a production environment, if required.

· Ability to self-start and work independently.

What We Offer

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company.

- Three comprehensive Medical plan options

Prescription

Dental

Vision

- Company Paid Life Insurance

- Voluntary Life Insurance

- Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance

- Company-paid Short-Term Disability

- Company-paid Long-Term Disability

- Paid time off (PTO) and paid Holidays

- 401k retirement plan with company match

- Employee Assistance Program

- Teladoc

- Legal Insurance

- Identity Theft Protection

- Pet Insurance

- Team Member Discount Program

- Tuition Reimbursement

- Yearly Wellness Clinic

MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

JOB SUMMARY

Responsible for scheduling and performing daily Housing Quality Standard (HQS) Inspections for the Section 8 HCV Program required by the Housing Authority and the Code of Federal Regulations that govern the HCV Program, Project Base Voucher Program, Special Programs, and the Federal Lead Based Paint Regulations. Completes all required paperwork and ensures that all units are in compliance with the Code of Federal Regulations and the Authority Administrative Plan. 

ESSENTIAL FUNCTIONS

Essential Duties and Responsibilities

The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned.

1. Coordinates, manages, and schedules HQS inspections as assigned.

2. Conducts inspections of housing units prior to occupancy and lease approval (initial inspections); annual inspections, and special/compliant inspections and re-inspections to determine compliance with Housing Authority policy and procedures, and the Code of Federal Regulations that govern the HCV Program.

3. Performs, documents, records, and uploads into appropriate system initial, interim, move-out, special, or recertification inspections of units for compliance with HQS and City Code. Advises owners/landlords and program participants of inspection results, ensures required repairs are completed, and encourages proper maintenance of units. Prepares all inspection-related correspondence, documents, and reports in a timely and accurate manner.

4. Identify the need of any repair(s) and/or HQS deficiencies and clearly indicates the nature of the problem(s)/deficiencies on a standardized inspection form or electronic tablet.

5. Presents HQS information at applicant, tenant, and moving briefings.

6.  Enforce Lead-Based Paint Regulations (e.g. to make visual assessment for deteriorated paint violations during initial, annual, and special/complaint inspections; assuring clearance examinations have been achieved when required; meeting requirements for children under age six).

7. Determine unit type, bedroom size and utility services for inspections performed.

8. Properly informs participants, property owners/managers of inspection result and clearly relays any deficiencies found for corrective action in a timely manner.

9. Assists with landlord meetings to attract new and maintain current landlords. Ensures the program is landlord-friendly without sacrificing duty to participants and to HUD.

10. Makes home visits as scheduled or as required.

11. Photographs all housekeeping inspections to document conditions at time of inspection.

12. Reports to the Inspections Supervisor all violations that occur that may be life threatening and/or not in compliance with preset standards.

13. Informs the Inspections Supervisor of situations and/or conditions of participants’ non-compliance with housing assistance contract and Housing Authority policies.

14. Notifies owners and program participants in writing of unit code/HQS violations so that deficiencies can be corrected within specified time; notifies participants of trash or debris that needs their attention; and notifies participants when employees or contractors will need access to their units.

15. Recommends code-compliant solutions for rehabilitation/repair problems.

16. Assists in mediating disputes between landlords and participants.

17. Recommends abatement, detainment, and termination of HCV Program housing assistance payment contracts and supports the Inspections Supervisor in the preparation of termination of assistance. Sends letter of abatement notice to owner/tenant within specified time period.

18. Performs, documents, and logs participant-complaints. 

19. Advises parties of results and ensures actions are taken to comply with HQS.

20. Assists in mediation between contractor and client to resolve differences of opinion and provides building code interpretations and applications as required.

21. Completes and maintains various forms, documents, and reports in an accurate and timely manner. Handles documents on a variety of general, personal, and technical topics of a highly confidential nature and maintains the confidentiality of all documents and information received by or in the possession of the employee.  

22. Participates in job and certification training; attends continuing education classes for certifications and to stay abreast of current codes, regulations, and laws governing area of responsibility.

23. May greet the general public and explains the HQS/HUD rules and regulations.

SUPERVISORY RESPONSIBILITIES

The HCV Inspector receives assignments and instructions from the Inspections Supervisor. Work to be done is usually determined by existing procedures or may be specified by the supervisor. The employee performs routine tasks with minimal or no supervision and must have excellent problem-solving abilities. Unusual situations not covered by instructions or procedures are referred to the supervisor for resolution. The employee's finished work is reviewed regularly for thoroughness, accuracy, completeness, and compliance with inspection requirements through housing quality control inspection samplings and periodic rental market samplings. The employee has no supervisory responsibilities.

***FULL JOB DESCRIPTION AVAILABLE AT HAKC.ORG***

EDUCATION AND EXPERIENCE

High school diploma/GED with a minimum of one (1) year experience in public or private inspector/general construction experience at the journeyman level. Valid driver’s license and use their own personal insurable vehicle to perform inspections.

The following Certifications must be obtained within one (1) year of employment or other allowable period of hire as authorized by the Executive Director or his/her designee:

§ Rent Calculation

§ Housing Quality Standards (HQS)

WORK ENVIRONMENT AND PHYSICAL DEMANDS

Incumbent(s) must be able to meet the physical requirements of the classification and have mobility, balance, coordination, vision, hearing, and dexterity levels appropriate to the functions performed. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Work is performed both in an office environment as well as indoor and outdoor environments that involves some exposure to a variety of environmental conditions including fumes, odors, dust, heat, etc. The incumbent frequently walks, stands, climbs, stoops, bends, kneels, reaches, and lifts items. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable    

accommodations may be made to enable individuals with disabilities to perform the essential functions.

Office environment. The noise level in the work environment is moderate. Work involves the normal risks or discomfort associated with an office environment and visits to outdoor developments, sites, dwellings, or facilities, confrontations with clients, and negotiations with housing owners, landlords, managers, and agents. Required site visits may involve exposure to adverse weather and road conditions. 

Work requires travel throughout the area, performing fieldwork in inclement weather. Position is often required to inspect unsanitary dwellings.

CONTACTS

The employee's contacts are primarily with coworkers, managers, housing owners, landlords, tenants, and vendors. Such contacts require the ability to establish and maintain good working relationships on a long-term basis. The purpose of such contacts is to provide information, guidance, and assistance in maintaining dwellings that are decent, safe, sanitary, and affordable. At times, new landlords and tenants may be skeptical and willing to express different viewpoints.

OTHER REQUIREMENTS

1. Must possess a valid driver’s license.
2. Must be available for occasional overnight travel for training.
3. Must pass employment drug screening and criminal background check.
4. Must work with the highest degree of confidentiality.

The Housing Authority of Kansas City, Missouri is an Equal Opportunity Employer. This job description is subject to change and in no manner states or implies that these are the only duties and responsibilities to be performed. The duties herein are representative of the essential functions of this job. This job description reflects management's assignment of functions; however, it does not prescribe or restrict tasks that may be assigned. Nothing in this document restricts management's right to assign or reassign duties and responsibilities at any time. The qualifications listed above are guidelines, other combinations of education and experience that could provide the necessary knowledge, skills, and abilities to perform the job may be considered at the discretion of the Executive Director.

Employment with the Housing Authority of Kansas City, Missouri is on an “at-will” basis. Nothing in this document is intended to create an employment contract, implied or otherwise, and does not constitute a promise of continued employment.

PI5fb2df5c6ac1-31181-39795881

Doctor of Medicine | Obstetrics and Gynecology

Location: Oregon

Employer: Barton Associates

Pay: Competitive weekly pay (inquire for details)

Start Date: ASAP

LocumJobsOnline is working with Barton Associates to find a qualified Obstetrics and Gynecology MD in Oregon!

We are seeking a dedicated Obstetrics/Gynecology Physician for an engaging 168-day assignment in Oregon, starting Jun 8, 2026. This role offers a dynamic schedule that includes four days of clinic during the week, supplemented by 1-2 nights of on-call duty, and weekend call rotations from Friday 7a to Monday 7a. The Physician will deliver comprehensive OB/GYN care, encompassing a wide range of clinic procedures, routine patient management, and critical call shift responsibilities such as vaginal deliveries and Cesarean sections.

Responsibilities and Duties

• Perform clinic cases/procedures including IUD removal/insertion, Nexplanon insertion, Colposcopy / LEEP, Endometrial Biopsy, and Pessary fitting / insertion
• Handle other excision/biopsy procedures as appropriate for OB/Gyn care
• Provide routine OB care
• Provide routine GYN care
• Conduct non-stress test strip assessments
• Manage rural OB cases, including high-risk situations with the ability to transfer patients as needed
• Perform vaginal deliveries, assisted vaginal deliveries, and Cesarean sections
• Conduct cerclages, D+Cs, D+Es, termination inductions, and pregnancy terminations
• Be prepared for high-risk deliveries with additional provider support available if necessary
• Perform C-Sections as an expected duty

Additional Information

• Required Board Certifications: Obstetrics and Gynecology
• EMR: Epic

Benefits

• Strong compensation
• Travel-related expenses covered
• A-rated medical malpractice insurance provided
• Dedicated recruiter for future travel opportunities

What are Locum Tenens Jobs?

Locum tenens jobs, sometimes referred to as travel assignments, are contract positions that help meet patient care needs at various healthcare facilities and hospitals for a defined period. These roles can vary in length from a single week to over a year, often with options for extension.

Medical professionals who undertake locum or travel work possess the same qualifications as permanent staff and frequently opt for these roles due to benefits such as competitive remuneration and greater scheduling flexibility.

#LI-SC1

About Barton Associates

The Locum Tenens Experts

Barton Associates is a leading national locum tenens physician, physician assistant, dentist, CRNA, and nurse practitioner staffing company. Whether you need long term support for your practice, short term vacation coverage, immediate coverage due to an unplanned absence or resignation, or anything in between, our locum tenens experts are here to help.

The Best Talent in the Industry

• 
  
• 
  

  Our experienced recruiting team conducts thorough interviews and reference checks to ensure that we have the best network of locum tenens physicians, dentists, physician assistants, and nurse practitioners in the industry – ready to go when you are.

  
  
  

Maximize Patient Access And Revenue

• 
  
• 
  

  Locum tenens staffing through Barton Associates is an effective way for your organization to optimize patient access, ensure continuity of care, and maximize revenue generation.

  
  
  

Flexible Solutions Your Organization Needs To Thrive

• 
  
• Whether you need long term coverage for your practice, short term vacation coverage, or anything in between – you can trust Barton Associates to provide the flexible staffi­ng solutions your organization needs to thrive.
  

A Proactive Approach

• 
  
• We recruit new locums every day, actively help our physicians, dentists, physician assistants, and nurse practitioners obtain new licenses so they’re ready to work in your state at a moment’s notice. We can also help your organization credential locums in advance of a specific need – greatly improving your ability to react to unforeseen­ staffing challenges.
  

Fast, Easy, Efficient Hiring Process

• 
  
• From securing the perfect candidate to credentialing and travel-related issues, our experts handle the entire locum tenens staffing process for you – so you can focus on your practice. Just let us know what you need and we’ll take care of the rest!
  

Medical Malpractice Insurance Provided

• 
  
• Many agencies charge additional separate fees for medical malpractice coverage. Barton Associates provides ‘A’ rated medical malpractice insurance for our locum tenens providers on assignment at no additional charge.
  

Industry Leading Support

• 
  
• When you work with Barton, you’re supported by an entire team of experts; including recruiters, account managers, licensing and credentialing specialists,travel coordinators, and others with one goal — to make the process as fast, easy, and efficient as possible.
  

1711930EXPPLAT

• This position requires an active DoD Clearance (Secret, Top Secret, Top Secret/SCI) or the ability to be obtain an (Interim Secret, Interim Top Secret)

• Because an active or interim DoD clearance is required, U.S. Citizenship is required 

Job Description

Responsibilities

• This technician will support a large federal agency's Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment
• This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards
• Lead network survey, design and installations under direction of the government
• analyze, test, troubleshoot, and evaluate existing network systems, such as local area networks (LAN), wide area networks (WAN), cloud networks, servers, and other data communications networks.
• Perform network maintenance to ensure networks operate correctly with minimal interruption.
• Knowledge of DISA network topologies and standards
• Topology and rack elevations using Visio
• Create detailed Site Survey reports detailing a site's current infrastructure, NIST and TEMPEST compliance, along with design recommendations
• Configure, install, test, certify, and troubleshoot network infrastructure cabling
• Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards
• Build and install equipment racks
• Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms
• Test and troubleshoot network infrastructure issues on SIPR and NIPR networks
• Create accurate reports and documentation to design/certify network infrastructure
• Track, manage, and ensure project tasks are completed in a timely manner
• Develop Bills of Material (BOM) for network plant design requirements
• Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)
• Investigate physical faults in the network
• Report network infrastructure deployment status to key stakeholders

Qualifications

• Must hold an active Secret security clearance
• (US Citizenship required)
• Security + Certification 

Additional Requirements:

• Organizes and directs network installations on site surveys.
• Assesses and documents current site network configuration and user requirements.
• Designs and optimizes network topologies.
• Directs and leads preparation of engineering plans and site installation Technical Design Packages.
• Develops installation schedules.
• Mobilizes network installation team.
• Directs and leads preparation of drawings documenting configuration changes at each site.
• Prepares site installation and test reports.
• Coordinates post installation operations and maintenance support.

Skills

Network engineering, Router, Firewall, Troubleshooting, Infrastructure, Ccna

Top Skills Details

Network engineering,Router,Firewall,Troubleshooting,Infrastructure,Ccna

Additional Skills & Qualifications

In addition to standard installer skillsets, candidates should possess the following:

• Cable installation and termination (fiber and copper)

• Rack and stack of network equipment

• Basic troubleshooting and testing of network connections

• Ability to read and follow network diagrams and installation plans

• Familiarity with structured cabling standards and labeling

Candidates with networking certifications (e.g., Network+, CCNA, Aruba, Versa) will be preferred.

Experience Level

Expert Level

This is a Contract position based out of Fort Meade, MD.

The pay range for this position is $39.00 - $40.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Fort Meade,MD.

This position is anticipated to close on Mar 24, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.